2024Article de journal ER2 Auteurs : Benzerzour, Mahfoud; Chu, Duc Chinh; Amar, Mouhamadou; Kleib, Joelle; Abriak, Nor-Edine A novel approach based on microstructural modeling and a multi-scale model to predicting the mechanical-elastic properties of cement paste Dans: Case Studies in Construction Materials, vol. 21, p. e03498, 2024, (ACL). Liens @article{benzerzour:hal-04687663,
title = {A novel approach based on microstructural modeling and a multi-scale model to predicting the mechanical-elastic properties of cement paste},
author = {Mahfoud Benzerzour and Duc Chinh Chu and Mouhamadou Amar and Joelle Kleib and Nor-Edine Abriak},
url = {https://hal.science/hal-04687663},
doi = {10.1016/j.cscm.2024.e03498},
year = {2024},
date = {2024-12-01},
urldate = {2024-12-01},
journal = {Case Studies in Construction Materials},
volume = {21},
pages = {e03498},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Mahfoud, Elie; Maherzi, Walid; Ndiaye, Khadim; Abriak, Nor-Edine; Aggoun, Salima; Benzerzour, Mahfoud One-part geopolymer based on micronized sediments and fly ash mix: Mechanical, microstructural and leaching assessment Dans: Journal of Building Engineering, vol. 96, p. 110426, 2024, (ACL). Liens @article{mahfoud:hal-04687752,
title = {One-part geopolymer based on micronized sediments and fly ash mix: Mechanical, microstructural and leaching assessment},
author = {Elie Mahfoud and Walid Maherzi and Khadim Ndiaye and Nor-Edine Abriak and Salima Aggoun and Mahfoud Benzerzour},
url = {https://hal.science/hal-04687752},
doi = {10.1016/j.jobe.2024.110426},
year = {2024},
date = {2024-11-01},
urldate = {2024-11-01},
journal = {Journal of Building Engineering},
volume = {96},
pages = {110426},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Amar, Mouhamadou; Ladduri, Bhargav; Alloul, Ali; Benzerzour, Mahfoud; Abriak, Nor-Edine Geopolymer synthesis and performance paving the way for greener building material: A comprehensive study Dans: Case Studies in Construction Materials, vol. 20, p. e03280, 2024, (ACL). Liens @article{amar:hal-04626745,
title = {Geopolymer synthesis and performance paving the way for greener building material: A comprehensive study},
author = {Mouhamadou Amar and Bhargav Ladduri and Ali Alloul and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.science/hal-04626745},
doi = {10.1016/j.cscm.2024.e03280},
year = {2024},
date = {2024-07-01},
urldate = {2024-07-01},
journal = {Case Studies in Construction Materials},
volume = {20},
pages = {e03280},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Jairi, Idriss; Ben-Othman, Sarah; Canivet, Ludivine; Zgaya-Biau, Hayfa Explainable based approach for the air quality classification on the granular computing rule extraction technique Dans: Engineering Applications of Artificial Intelligence, vol. 133, p. 108096, 2024, (ACL). Liens @article{jairi:hal-04469637,
title = {Explainable based approach for the air quality classification on the granular computing rule extraction technique},
author = {Idriss Jairi and Sarah Ben-Othman and Ludivine Canivet and Hayfa Zgaya-Biau},
url = {https://hal.science/hal-04469637},
doi = {10.1016/j.engappai.2024.108096},
year = {2024},
date = {2024-07-01},
urldate = {2024-07-01},
journal = {Engineering Applications of Artificial Intelligence},
volume = {133},
pages = {108096},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Bellara, Selma; Maherzi, Walid; Mezazigh, S.; Senouci, Ahmed Mineral waste valorization in road subgrade construction: Algerian case study based on technical and environmental features Dans: Case Studies in Construction Materials, vol. 20, p. e02764, 2024, (ACL). Liens @article{bellara:hal-04495189,
title = {Mineral waste valorization in road subgrade construction: Algerian case study based on technical and environmental features},
author = {Selma Bellara and Walid Maherzi and S. Mezazigh and Ahmed Senouci},
url = {https://hal.science/hal-04495189},
doi = {10.1016/j.cscm.2023.e02764},
year = {2024},
date = {2024-07-01},
urldate = {2024-07-01},
journal = {Case Studies in Construction Materials},
volume = {20},
pages = {e02764},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Amar, Mouhamadou; Ladduri, Bhargav; Alloul, Ali; Benzerzour, Mahfoud; Abriak, Nor-Edine Microstructure and mechanical properties of geopolymers utilizing excavated soils, metakaolin and slags Dans: Journal of Building Engineering, vol. 86, p. 108755, 2024, (ACL). Liens @article{amar:hal-04633654,
title = {Microstructure and mechanical properties of geopolymers utilizing excavated soils, metakaolin and slags},
author = {Mouhamadou Amar and Bhargav Ladduri and Ali Alloul and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.science/hal-04633654},
doi = {10.1016/j.jobe.2024.108755},
year = {2024},
date = {2024-06-01},
urldate = {2024-06-01},
journal = {Journal of Building Engineering},
volume = {86},
pages = {108755},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Book Section ER2 Auteurs : Souabi, Salah; Anouzla, Abdelkader; Abriak, Nor-Edine; Pala, Aysegul; Kurniawan, Tonni Agustiono Leachate Discharge from a Public Landfill: Design and Sizing of a Treatment System Dans: A Review of Landfill Leachate, p. 239-263, Springer Nature Switzerland, 2024, (OS). Liens @incollection{souabi:hal-04638334,
title = {Leachate Discharge from a Public Landfill: Design and Sizing of a Treatment System},
author = {Salah Souabi and Abdelkader Anouzla and Nor-Edine Abriak and Aysegul Pala and Tonni Agustiono Kurniawan},
url = {https://hal.science/hal-04638334},
doi = {10.1007/978-3-031-55513-8_12},
year = {2024},
date = {2024-05-01},
urldate = {2024-05-01},
booktitle = {A Review of Landfill Leachate},
pages = {239-263},
publisher = {Springer Nature Switzerland},
series = {Springer Water},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {incollection}
}
|
2024Article de journal ER2 Auteurs : Boussai, Khawla; Maherzi, Walid; Mosbahi, Mohamed; Dhahri, Mouldi; Abriak, Nor-Edine; Hamdi, Wissem; Mellah, Besma; Hamdi, Noureddine Selective removal of zinc from single and industrial aqueous solutions using ecologically sustainable ceramic adsorptive aggregates Dans: Euro-Mediterranean Journal for Environmental Integration, 2024, (ACL). Liens @article{boussai:hal-04639002,
title = {Selective removal of zinc from single and industrial aqueous solutions using ecologically sustainable ceramic adsorptive aggregates},
author = {Khawla Boussai and Walid Maherzi and Mohamed Mosbahi and Mouldi Dhahri and Nor-Edine Abriak and Wissem Hamdi and Besma Mellah and Noureddine Hamdi},
url = {https://hal.science/hal-04639002},
doi = {10.1007/s41207-024-00547-7},
year = {2024},
date = {2024-05-01},
urldate = {2024-05-01},
journal = {Euro-Mediterranean Journal for Environmental Integration},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Perez, C.; Tinel, L.; Verriele, Marie; Locoge, N.; Becquart, Frédéric; Lors, Christine Strategy for the monitoring of fungal colonization in buildings-challenges and perspectives Dans: International Biodeterioration & Biodegradation, vol. 189, p. 105764, 2024, (ACL). Liens @article{perez:hal-04492014,
title = {Strategy for the monitoring of fungal colonization in buildings-challenges and perspectives},
author = {C. Perez and L. Tinel and Marie Verriele and N. Locoge and Frédéric Becquart and Christine Lors},
url = {https://hal.science/hal-04492014},
doi = {10.1016/j.ibiod.2024.105764},
year = {2024},
date = {2024-04-01},
urldate = {2024-04-01},
journal = {International Biodeterioration & Biodegradation},
volume = {189},
pages = {105764},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Amar, Mouhamadou; Kleib, Joelle; Tall, Mouhamadou; Alloul, Ali; Zeraoui, Ahmed; Abriak, Nor-Edine; Benzerzour, Mahfoud Case study: reuse of excavated soils from the Grand Paris Express project for the formulation of low-carbon cementitious matrixes Dans: Journal of Material Cycles and Waste Management, vol. 26, no. 4, p. 2579-2590, 2024, (ACL). Liens @article{amar:hal-04636110,
title = {Case study: reuse of excavated soils from the Grand Paris Express project for the formulation of low-carbon cementitious matrixes},
author = {Mouhamadou Amar and Joelle Kleib and Mouhamadou Tall and Ali Alloul and Ahmed Zeraoui and Nor-Edine Abriak and Mahfoud Benzerzour},
url = {https://hal.science/hal-04636110},
doi = {10.1007/s10163-024-01957-z},
year = {2024},
date = {2024-04-01},
urldate = {2024-04-01},
journal = {Journal of Material Cycles and Waste Management},
volume = {26},
number = {4},
pages = {2579-2590},
publisher = {Springer Verlag (Germany)},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Book Section ER2 Auteurs : Makni, Hajer; Becquart, Frédéric; Khlif, Mohamed; Abriak, Nor-Edine; Bradai, Chedly Multiphysics Properties of Fired Clay Bricks Incorporating Deinking Paper Sludge Dans: Proceedings of the 3rd International EUROMAGH Conference 2020, vol. 43, p. 261-269, Springer Nature Singapore, 2024, (DO). Liens @incollection{makni:hal-04636119,
title = {Multiphysics Properties of Fired Clay Bricks Incorporating Deinking Paper Sludge},
author = {Hajer Makni and Frédéric Becquart and Mohamed Khlif and Nor-Edine Abriak and Chedly Bradai},
url = {https://hal.science/hal-04636119},
doi = {10.1007/978-981-97-2000-2_30},
year = {2024},
date = {2024-04-01},
urldate = {2024-04-01},
booktitle = {Proceedings of the 3rd International EUROMAGH Conference 2020},
volume = {43},
pages = {261-269},
publisher = {Springer Nature Singapore},
series = {Springer Proceedings in Materials},
note = {DO},
keywords = {ER2},
pubstate = {published},
tppubtype = {incollection}
}
|
2024Book Section ER2 Auteurs : Rais, Zakia; Becquart, Frederic Introduction Dans: Proceedings of the 3rd International EUROMAGH Conference 2020, vol. 43, p. 217-221, Springer Nature Singapore, 2024, (DO). Liens @incollection{rais:hal-04636128,
title = {Introduction},
author = {Zakia Rais and Frederic Becquart},
url = {https://hal.science/hal-04636128},
doi = {10.1007/978-981-97-2000-2_25},
year = {2024},
date = {2024-04-01},
urldate = {2024-04-01},
booktitle = {Proceedings of the 3rd International EUROMAGH Conference 2020},
volume = {43},
pages = {217-221},
publisher = {Springer Nature Singapore},
series = {Springer Proceedings in Materials},
note = {DO},
keywords = {ER2},
pubstate = {published},
tppubtype = {incollection}
}
|
2024Article de journal ER2 Auteurs : Thiéry, Vincent Barthélémy Faujas de Saint-Fond (1741–1819) and his work on pozzolans and lime: A pioneer in sustainable building Dans: Proceedings of the Geologists' Association, 2024, (ACL). Liens @article{thiery:hal-04560190,
title = {Barthélémy Faujas de Saint-Fond (1741–1819) and his work on pozzolans and lime: A pioneer in sustainable building},
author = {Vincent Thiéry},
url = {https://imt-nord-europe.hal.science/hal-04560190},
doi = {10.1016/j.pgeola.2024.04.004},
year = {2024},
date = {2024-04-01},
urldate = {2024-04-01},
journal = {Proceedings of the Geologists' Association},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Ennahal, Ilyas; Abriak, Yassine; Benzerzour, Mahfoud; Becquart, Frederic; Maherzi, Walid Utilizing bottom ash from municipal solid waste incineration as a sustainable replacement for natural aggregates in epoxy mortar production: a feasibility study Dans: Journal of Material Cycles and Waste Management, vol. 26, no. 4, p. 2187-2199, 2024, (ACL). Liens @article{ennahal:hal-04638173,
title = {Utilizing bottom ash from municipal solid waste incineration as a sustainable replacement for natural aggregates in epoxy mortar production: a feasibility study},
author = {Ilyas Ennahal and Yassine Abriak and Mahfoud Benzerzour and Frederic Becquart and Walid Maherzi},
url = {https://hal.science/hal-04638173},
doi = {10.1007/s10163-024-01956-0},
year = {2024},
date = {2024-04-01},
urldate = {2024-04-01},
journal = {Journal of Material Cycles and Waste Management},
volume = {26},
number = {4},
pages = {2187-2199},
publisher = {Springer Verlag (Germany)},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Chedrewih, Migueli; Medala, Marta; Schmid, Christelle; Garcia, Emmanuel; Damidot, Denis; Thiéry, Vincent Application of various microscopy techniques to study early-age and longer-term behaviour of super sulphated cement microstructure Dans: Journal of Microscopy, vol. 294, no. 2, p. 155-167, 2024, (ACL). Liens @article{chedrewih:hal-04633841,
title = {Application of various microscopy techniques to study early-age and longer-term behaviour of super sulphated cement microstructure},
author = {Migueli Chedrewih and Marta Medala and Christelle Schmid and Emmanuel Garcia and Denis Damidot and Vincent Thiéry},
url = {https://hal.science/hal-04633841},
doi = {10.1111/jmi.13281},
year = {2024},
date = {2024-03-01},
urldate = {2024-03-01},
journal = {Journal of Microscopy},
volume = {294},
number = {2},
pages = {155-167},
publisher = {Wiley},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Bouzar, Bader; Mamindy-Pajany, Yannick; Abriak, Yassine; Abriak, Nor-Edine; Benzerzour, Mahfoud Accelerated carbonation of waste paper fly ash by liquid process (NaHCO3) for stabilization of Ba and Pb Dans: Powder Technology, vol. 434, p. 119340, 2024, (ACL). Liens @article{bouzar:hal-04387569,
title = {Accelerated carbonation of waste paper fly ash by liquid process (NaHCO3) for stabilization of Ba and Pb},
author = {Bader Bouzar and Yannick Mamindy-Pajany and Yassine Abriak and Nor-Edine Abriak and Mahfoud Benzerzour},
url = {https://hal.science/hal-04387569},
doi = {10.1016/j.powtec.2023.119340},
year = {2024},
date = {2024-02-01},
urldate = {2024-02-01},
journal = {Powder Technology},
volume = {434},
pages = {119340},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Almokdad, Mohammad; Zentar, Rachid Flash-calcined sediments versus raw sediments: A comparative life cycle assessment of SCMs Dans: Construction and Building Materials, vol. 411, p. 134550, 2024, (ACL). Liens @article{almokdad:hal-04402377,
title = {Flash-calcined sediments versus raw sediments: A comparative life cycle assessment of SCMs},
author = {Mohammad Almokdad and Rachid Zentar},
url = {https://hal.science/hal-04402377},
doi = {10.1016/j.conbuildmat.2023.134550},
year = {2024},
date = {2024-01-01},
urldate = {2024-01-01},
journal = {Construction and Building Materials},
volume = {411},
pages = {134550},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Kourtaa, Salim; Chabannes, Morgan; Becquart, Frédéric; Abriak, Nor-Edine Application of a newly developed sediment-based binder for rapeseed straw and flax shiv concretes Dans: Cement and Concrete Composites, vol. 145, p. 105346, 2024, (ACL). Liens @article{kourtaa:hal-04275691,
title = {Application of a newly developed sediment-based binder for rapeseed straw and flax shiv concretes},
author = {Salim Kourtaa and Morgan Chabannes and Frédéric Becquart and Nor-Edine Abriak},
url = {https://hal.science/hal-04275691},
doi = {10.1016/j.cemconcomp.2023.105346},
year = {2024},
date = {2024-01-01},
urldate = {2024-01-01},
journal = {Cement and Concrete Composites},
volume = {145},
pages = {105346},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER2 Auteurs : Chafei, Sawsen; Dutra, Lorena Freitas; Jamali, Arash Enhancing Mechanical Behavior of Cement Composites through Citric Acid Treatment of Flax Fibers Dans: Journal of Materials in Civil Engineering, vol. 36, no. 1, 2024, (ACL). Liens @article{chafei:hal-04303588,
title = {Enhancing Mechanical Behavior of Cement Composites through Citric Acid Treatment of Flax Fibers},
author = {Sawsen Chafei and Lorena Freitas Dutra and Arash Jamali},
url = {https://hal.science/hal-04303588},
doi = {10.1061/JMCEE7.MTENG-15863},
year = {2024},
date = {2024-01-01},
urldate = {2024-01-01},
journal = {Journal of Materials in Civil Engineering},
volume = {36},
number = {1},
publisher = {American Society of Civil Engineers},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Abriak, Yassine; Chu, Duc Chinh; Maherzi, Walid; Benzerzour, Mahfoud; Rivard, Patrice Influence of fine recycled concrete aggregates use on the hydration kinetics and mechanical–microstructural properties of hydrated cement: Experimental and numerical approaches Dans: Construction and Building Materials, vol. 408, p. 133769, 2023, (ACL). Liens @article{abriak:hal-04326780b,
title = {Influence of fine recycled concrete aggregates use on the hydration kinetics and mechanical–microstructural properties of hydrated cement: Experimental and numerical approaches},
author = {Yassine Abriak and Duc Chinh Chu and Walid Maherzi and Mahfoud Benzerzour and Patrice Rivard},
url = {https://hal.science/hal-04326780},
doi = {10.1016/j.conbuildmat.2023.133769},
year = {2023},
date = {2023-12-01},
urldate = {2023-12-01},
journal = {Construction and Building Materials},
volume = {408},
pages = {133769},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Mahfoud, Elie; Ndiaye, Khadim; Maherzi, Walid; Aggoun, Salima; Benzerzour, Mahfoud; Abriak, Nor-Edine Mechanical properties and shrinkage performance of one-part-geopolymer based on fly ash and micronized dredged sediments Dans: Developments in the Built Environment, vol. 16, p. 100253, 2023, (ACL). Liens @article{mahfoud:hal-04329880,
title = {Mechanical properties and shrinkage performance of one-part-geopolymer based on fly ash and micronized dredged sediments},
author = {Elie Mahfoud and Khadim Ndiaye and Walid Maherzi and Salima Aggoun and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.science/hal-04329880},
doi = {10.1016/j.dibe.2023.100253},
year = {2023},
date = {2023-12-01},
urldate = {2023-12-01},
journal = {Developments in the Built Environment},
volume = {16},
pages = {100253},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Alloul, Ali; Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine A comparative analysis of ambient-cured metakaolin geopolymer mortar and flash-calcined soil geopolymer Dans: Construction and Building Materials, vol. 409, p. 134085, 2023, (ACL). Liens @article{alloul:hal-04301731,
title = {A comparative analysis of ambient-cured metakaolin geopolymer mortar and flash-calcined soil geopolymer},
author = {Ali Alloul and Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.science/hal-04301731},
doi = {10.1016/j.conbuildmat.2023.134085},
year = {2023},
date = {2023-12-01},
urldate = {2023-12-01},
journal = {Construction and Building Materials},
volume = {409},
pages = {134085},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Colman, Charlotte; Bulteel, David; Elkarim, Bouarroudj Mohamed; Rémond, Sébastien; Courard, Luc Expansion of concrete by secondary ettringite formation due to fine recycled aggregates contaminated with gypsum Dans: Advances in Cement Research, vol. 35, no. 11, p. 480-488, 2023, (ACL). Liens @article{colman:hal-04329786,
title = {Expansion of concrete by secondary ettringite formation due to fine recycled aggregates contaminated with gypsum},
author = {Charlotte Colman and David Bulteel and Bouarroudj Mohamed Elkarim and Sébastien Rémond and Luc Courard},
url = {https://hal.science/hal-04329786},
doi = {10.1680/jadcr.22.00043},
year = {2023},
date = {2023-11-01},
urldate = {2023-11-01},
journal = {Advances in Cement Research},
volume = {35},
number = {11},
pages = {480-488},
publisher = {Thomas Telford},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Bouzar, Bader; Benzerzour, Mahfoud; Abriak, Nor-Edine Fluorine soil stabilization using hydroxyapatite synthesized from minerals wastes Dans: Arabian Journal of Chemistry, vol. 16, no. 11, p. 105261, 2023, (ACL). Liens @article{bouzar:hal-04247399,
title = {Fluorine soil stabilization using hydroxyapatite synthesized from minerals wastes},
author = {Bader Bouzar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04247399},
doi = {10.1016/j.arabjc.2023.105261},
year = {2023},
date = {2023-11-01},
urldate = {2023-11-01},
journal = {Arabian Journal of Chemistry},
volume = {16},
number = {11},
pages = {105261},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Non publié ER2 Auteurs : Giboulot, Olivier; Olivier, Giboulot; Emmanuel, Lemelin; Binetruy, Christophe; Abriak, Nor-Edine Renewal of Ballasted Railway Tracks in France on Conventional Lines: Contribution to the Development of Material Flow Analysis (Mfa) 2023, (AP). Liens @unpublished{giboulot:hal-04301979,
title = {Renewal of Ballasted Railway Tracks in France on Conventional Lines: Contribution to the Development of Material Flow Analysis (Mfa)},
author = {Olivier Giboulot and Giboulot Olivier and Lemelin Emmanuel and Christophe Binetruy and Nor-Edine Abriak},
url = {https://hal.science/hal-04301979},
doi = {10.2139/ssrn.4229532},
year = {2023},
date = {2023-11-01},
urldate = {2023-11-01},
note = {AP},
keywords = {ER2},
pubstate = {published},
tppubtype = {unpublished}
}
|
2023Article de journal ER2 Auteurs : Mahfoud, Elie; Maherzi, Walid; Ndiaye, Khadim; Benzerzour, Mahfoud; Aggoun, Salima; Abriak, Nor-Edine Mechanical and microstructural properties of just add water geopolymer cement comprised of Thermo-Mechanicalsynthesis Sediments-Fly ash mix Dans: Construction and Building Materials, vol. 400, p. 132626, 2023, (ACL). Liens @article{mahfoud:hal-04329455b,
title = {Mechanical and microstructural properties of just add water geopolymer cement comprised of Thermo-Mechanicalsynthesis Sediments-Fly ash mix},
author = {Elie Mahfoud and Walid Maherzi and Khadim Ndiaye and Mahfoud Benzerzour and Salima Aggoun and Nor-Edine Abriak},
url = {https://hal.science/hal-04329455},
doi = {10.1016/j.conbuildmat.2023.132626},
year = {2023},
date = {2023-10-01},
urldate = {2023-10-01},
journal = {Construction and Building Materials},
volume = {400},
pages = {132626},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Almokdad, Mohammad; Zentar, Rachid Characterization of recycled dredged Sediments: Toward circular economy in road construction Dans: Construction and Building Materials, vol. 402, p. 132974, 2023, (ACL). Liens @article{almokdad:hal-04300008,
title = {Characterization of recycled dredged Sediments: Toward circular economy in road construction},
author = {Mohammad Almokdad and Rachid Zentar},
url = {https://hal.science/hal-04300008},
doi = {10.1016/j.conbuildmat.2023.132974},
year = {2023},
date = {2023-10-01},
urldate = {2023-10-01},
journal = {Construction and Building Materials},
volume = {402},
pages = {132974},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Thib, Raghed Al; Belayachi, Naima; Bouarroudj, Mohamed Elkarim; Bulteel, David; Rémond, Sébastien A methodology for designing 3D printable mortar based on recycled sand Dans: Materials and structures, vol. 56, no. 9, p. 165, 2023, (ACL). Liens @article{althib:hal-04326656,
title = {A methodology for designing 3D printable mortar based on recycled sand},
author = {Raghed Al Thib and Naima Belayachi and Mohamed Elkarim Bouarroudj and David Bulteel and Sébastien Rémond},
url = {https://hal.science/hal-04326656},
doi = {10.1617/s11527-023-02251-4},
year = {2023},
date = {2023-10-01},
urldate = {2023-10-01},
journal = {Materials and structures},
volume = {56},
number = {9},
pages = {165},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Alloul, Ali; Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine Developing mortar using limestone flash-calcined dredged sediment/millstone-clay cement binder (LFC) Dans: Journal of Building Engineering, vol. 76, p. 107346, 2023, (ACL). Liens @article{alloul:hal-04329431,
title = {Developing mortar using limestone flash-calcined dredged sediment/millstone-clay cement binder (LFC)},
author = {Ali Alloul and Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.science/hal-04329431},
doi = {10.1016/j.jobe.2023.107346},
year = {2023},
date = {2023-10-01},
urldate = {2023-10-01},
journal = {Journal of Building Engineering},
volume = {76},
pages = {107346},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Benkabouche, Ali; Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine; T'kint, Michèle; Mouli, Mohamed The Influence of external sulfate attack on the durability of reinforced mortars in the presence of calcined river sediments Dans: Materials, vol. 16, no. 20, p. 6684, 2023. Liens @article{benkabouche:hal-04279993,
title = {The Influence of external sulfate attack on the durability of reinforced mortars in the presence of calcined river sediments},
author = {Ali Benkabouche and Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak and Michèle T'kint and Mohamed Mouli},
url = {https://hal.science/hal-04279993},
doi = {10.3390/ma16206684},
year = {2023},
date = {2023-10-01},
journal = {Materials},
volume = {16},
number = {20},
pages = {6684},
publisher = {MDPI},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Zentar, Rachid; Ouendi, Fatima; Wang, Hongwei Effects of sample preparation methods on measured characteristics of marine and fluvial sediment Dans: International Journal of Sediment Research, 2023, (ACL). Liens @article{zentar:hal-04300020,
title = {Effects of sample preparation methods on measured characteristics of marine and fluvial sediment},
author = {Rachid Zentar and Fatima Ouendi and Hongwei Wang},
url = {https://hal.science/hal-04300020},
doi = {10.1016/j.ijsrc.2023.09.002},
year = {2023},
date = {2023-09-01},
urldate = {2023-09-01},
journal = {International Journal of Sediment Research},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Bouarroudj, Mohamed Elkarim; Rémond, Sébastien; Cazacliu, Bogdan; Potier, Guillaume; Courard, Luc; Bulteel, David Effects of Crushing and Grinding on the Porosity of Hardened Cement Paste Dans: Buildings, vol. 13, no. 9, p. 2319, 2023, (ACL). Liens @article{bouarroudj:hal-04326734,
title = {Effects of Crushing and Grinding on the Porosity of Hardened Cement Paste},
author = {Mohamed Elkarim Bouarroudj and Sébastien Rémond and Bogdan Cazacliu and Guillaume Potier and Luc Courard and David Bulteel},
url = {https://hal.science/hal-04326734},
doi = {10.3390/buildings13092319},
year = {2023},
date = {2023-09-01},
urldate = {2023-09-01},
journal = {Buildings},
volume = {13},
number = {9},
pages = {2319},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Chedrewih, Migueli; Thiéry, Vincent; Gauthier, Arnaud; Amin, Fouad Incorporation of antimony-bearing mining wastes into clinker Portland raw feed: The difficulty of Sb analysis in calcium silicates Dans: Journal of Microscopy, 2023, (ACL). Liens @article{chedrewih:hal-04237014,
title = {Incorporation of antimony-bearing mining wastes into clinker Portland raw feed: The difficulty of Sb analysis in calcium silicates},
author = {Migueli Chedrewih and Vincent Thiéry and Arnaud Gauthier and Fouad Amin},
url = {https://imt-nord-europe.hal.science/hal-04237014},
doi = {10.1111/jmi.13228},
year = {2023},
date = {2023-09-01},
urldate = {2023-09-01},
journal = {Journal of Microscopy},
publisher = {Wiley},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Alloul, Ali; Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine Geopolymer mortar with flash-calcined sediments cured under ambient conditions Dans: Construction and Building Materials, vol. 391, p. 131809, 2023. Liens @article{alloul:hal-04154717,
title = {Geopolymer mortar with flash-calcined sediments cured under ambient conditions},
author = {Ali Alloul and Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04154717},
doi = {10.1016/j.conbuildmat.2023.131809},
year = {2023},
date = {2023-08-01},
journal = {Construction and Building Materials},
volume = {391},
pages = {131809},
publisher = {Elsevier},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Mkahal, Zeinab; Maherzi, Walid; Mamindy-Pajany, Yannick; Bouzar, Bader; Abriak, Nor-Edine Development of a low-carbon binder based on raw, ground, and carbonated waste paper fly ash Dans: Sustainable Materials and Technologies, vol. 36, p. e00650, 2023, (ACL). Liens @article{mkahal:hal-04329628,
title = {Development of a low-carbon binder based on raw, ground, and carbonated waste paper fly ash},
author = {Zeinab Mkahal and Walid Maherzi and Yannick Mamindy-Pajany and Bader Bouzar and Nor-Edine Abriak},
url = {https://hal.science/hal-04329628},
doi = {10.1016/j.susmat.2023.e00650},
year = {2023},
date = {2023-07-01},
urldate = {2023-07-01},
journal = {Sustainable Materials and Technologies},
volume = {36},
pages = {e00650},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Kourtaa, Salim; Chabannes, Morgan; Becquart, Frédéric; Abriak, Nor-Edine Hydration of lime-marine sediment blends: Influence of mineralogical composition and lime content Dans: Advanced Powder Technology, vol. 34, no. 6, p. 104043, 2023, (ACL). Liens @article{kourtaa:hal-04074203,
title = {Hydration of lime-marine sediment blends: Influence of mineralogical composition and lime content},
author = {Salim Kourtaa and Morgan Chabannes and Frédéric Becquart and Nor-Edine Abriak},
url = {https://hal.science/hal-04074203},
doi = {10.1016/j.apt.2023.104043},
year = {2023},
date = {2023-06-01},
urldate = {2023-06-01},
journal = {Advanced Powder Technology},
volume = {34},
number = {6},
pages = {104043},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Chu, Duc Chinh; Amar, Mouhamadou; Benzerzour, Mahfoud; Kleib, Joelle; Abriak, Nor-Edine Flash-Calcined Sediments for Zinc Adsorption Dans: Sustainability, vol. 15, no. 13, p. 10230, 2023, (ACL). Liens @article{chu:hal-04301879,
title = {Flash-Calcined Sediments for Zinc Adsorption},
author = {Duc Chinh Chu and Mouhamadou Amar and Mahfoud Benzerzour and Joelle Kleib and Nor-Edine Abriak},
url = {https://hal.science/hal-04301879},
doi = {10.3390/su151310230},
year = {2023},
date = {2023-06-01},
urldate = {2023-06-01},
journal = {Sustainability},
volume = {15},
number = {13},
pages = {10230},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Kourtaa, Salim; Chabannes, Morgan; Becquart, Frédéric; Abriak, Nor-Edine Hydration of lime-marine sediment blends: Influence of mineralogical composition and lime content Dans: Advanced Powder Technology, vol. 34, no. 6, p. 104043, 2023, (ACL). Liens @article{kourtaa:hal-04074203b,
title = {Hydration of lime-marine sediment blends: Influence of mineralogical composition and lime content},
author = {Salim Kourtaa and Morgan Chabannes and Frédéric Becquart and Nor-Edine Abriak},
url = {https://hal.science/hal-04074203},
doi = {10.1016/j.apt.2023.104043},
year = {2023},
date = {2023-06-01},
urldate = {2023-06-01},
journal = {Advanced Powder Technology},
volume = {34},
number = {6},
pages = {104043},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Daher, Jana; Kleib, Joelle; Benzerzour, Mahfoud; Abriak, Nor-Edine; Aouad, Georges The Development of Soil-Based 3D-Printable Mixtures: A Mix-Design Methodology and a Case Study Dans: Buildings, vol. 13, no. 7, p. 1618, 2023, (ACL). Liens @article{daher:hal-04301841,
title = {The Development of Soil-Based 3D-Printable Mixtures: A Mix-Design Methodology and a Case Study},
author = {Jana Daher and Joelle Kleib and Mahfoud Benzerzour and Nor-Edine Abriak and Georges Aouad},
url = {https://hal.science/hal-04301841},
doi = {10.3390/buildings13071618},
year = {2023},
date = {2023-06-01},
urldate = {2023-06-01},
journal = {Buildings},
volume = {13},
number = {7},
pages = {1618},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Belayali, Fouad; Maherzi, Walid; Benzerzour, Mahfoud; Abriak, Nor-Edine Influence of the physical and chemical characteristics of sediment fillers on the properties of mastic asphalt Dans: Powder Technology, vol. 421, p. 118393, 2023, (ACL). Liens @article{belayali:hal-04154718,
title = {Influence of the physical and chemical characteristics of sediment fillers on the properties of mastic asphalt},
author = {Fouad Belayali and Walid Maherzi and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04154718},
doi = {10.1016/j.powtec.2023.118393},
year = {2023},
date = {2023-05-01},
urldate = {2023-05-01},
journal = {Powder Technology},
volume = {421},
pages = {118393},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Maherzi, Walid; Ennahal, Ilyas; Bouaich, Fatima Zahra; Benzerzour, Mahfoud; Rais, Zakia; Mamindy-Pajany, Yannick; Abriak, Nor-Edine Assessment of Dynamic Surface Leaching of Monolithic Polymer Mortars Comprised of Wastes Dans: Materials, vol. 16, no. 6, p. 2150, 2023, (ACL). Liens @article{maherzi:hal-04168009,
title = {Assessment of Dynamic Surface Leaching of Monolithic Polymer Mortars Comprised of Wastes},
author = {Walid Maherzi and Ilyas Ennahal and Fatima Zahra Bouaich and Mahfoud Benzerzour and Zakia Rais and Yannick Mamindy-Pajany and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168009},
doi = {10.3390/ma16062150},
year = {2023},
date = {2023-03-01},
urldate = {2023-03-01},
journal = {Materials},
volume = {16},
number = {6},
pages = {2150},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Abriak, Yassine; Maherzi, Walid; Benzerzour, Mahfoud; Senouci, Ahmed; Rivard, Patrice Valorization of Dredged Sediments and Recycled Concrete Aggregates in Road Subgrade Construction Dans: Buildings, vol. 13, no. 3, p. 646, 2023, (ACL). Liens @article{abriak:hal-04168015,
title = {Valorization of Dredged Sediments and Recycled Concrete Aggregates in Road Subgrade Construction},
author = {Yassine Abriak and Walid Maherzi and Mahfoud Benzerzour and Ahmed Senouci and Patrice Rivard},
url = {https://imt-nord-europe.hal.science/hal-04168015},
doi = {10.3390/buildings13030646},
year = {2023},
date = {2023-03-01},
urldate = {2023-03-01},
journal = {Buildings},
volume = {13},
number = {3},
pages = {646},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Safhi, Amine El Mahdi; Rivard, Patrice; Benzerzour, Mahfoud; Abriak, Nor-Edine Artificial Rocks Made from Dredged Sands of the Magdalen Islands (Canada): Preliminary Study Dans: Rilem Bookseries, vol. 40, p. 994-1003, 2023. Liens @article{safhi:hal-04168027,
title = {Artificial Rocks Made from Dredged Sands of the Magdalen Islands (Canada): Preliminary Study},
author = {Amine El Mahdi Safhi and Patrice Rivard and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168027},
doi = {10.1007/978-3-031-21735-7_105},
year = {2023},
date = {2023-03-01},
journal = {Rilem Bookseries},
volume = {40},
pages = {994-1003},
series = {RILEM Bookseries},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Kleib, Joelle; Aouad, Georges; Benzerzour, Mahfoud; Abriak, Nor-Edine; Zakhour, Mirvat Managing the Heat Release of Calcium Sulfoaluminate Cement by Modifying the Ye'elimite Content Dans: Materials, vol. 16, no. 6, p. 2470, 2023, (ACL). Liens @article{kleib:hal-04168019,
title = {Managing the Heat Release of Calcium Sulfoaluminate Cement by Modifying the Ye'elimite Content},
author = {Joelle Kleib and Georges Aouad and Mahfoud Benzerzour and Nor-Edine Abriak and Mirvat Zakhour},
url = {https://imt-nord-europe.hal.science/hal-04168019},
doi = {10.3390/ma16062470},
year = {2023},
date = {2023-03-01},
urldate = {2023-03-01},
journal = {Materials},
volume = {16},
number = {6},
pages = {2470},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Wang, Hongwei; Zentar, Rachid; Wang, Dongxing Predicting the compaction parameters of solidified dredged fine sediments with statistical approach Dans: Marine Georesources and Geotechnology, vol. 41, no. 2, p. 195-210, 2023, (ACL). Liens @article{wang:hal-04095787,
title = {Predicting the compaction parameters of solidified dredged fine sediments with statistical approach},
author = {Hongwei Wang and Rachid Zentar and Dongxing Wang},
url = {https://hal.science/hal-04095787},
doi = {10.1080/1064119X.2021.2023827},
year = {2023},
date = {2023-02-01},
urldate = {2023-02-01},
journal = {Marine Georesources and Geotechnology},
volume = {41},
number = {2},
pages = {195-210},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Bouzar, Bader; Mamindy-Pajany, Yannick; Hurel, Charlotte Innovative Reuse of Fly Ashes for Treatment of a Contaminated River Sediment: Synthesis of Layered Double Hydroxides (LDH) and Chemical Performance Assessments Dans: Waste and Biomass Valorization, vol. 14, no. 11, p. 3923-3945, 2023, (ACL). Liens @article{bouzar:hal-04329401,
title = {Innovative Reuse of Fly Ashes for Treatment of a Contaminated River Sediment: Synthesis of Layered Double Hydroxides (LDH) and Chemical Performance Assessments},
author = {Bader Bouzar and Yannick Mamindy-Pajany and Charlotte Hurel},
url = {https://hal.science/hal-04329401},
doi = {10.1007/s12649-023-02056-0},
year = {2023},
date = {2023-02-01},
urldate = {2023-02-01},
journal = {Waste and Biomass Valorization},
volume = {14},
number = {11},
pages = {3923-3945},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Zeraoui, Ahmed; Maherzi, Walid; Benzerzour, Mahfoud; Abriak, Nor Edine; Aouad, Georges Development of Flash-Calcined Sediment and Blast Furnace Slag Ternary Binders Dans: Buildings, vol. 13, no. 2, p. 333, 2023, (ACL). Liens @article{zeraoui:hal-04007498,
title = {Development of Flash-Calcined Sediment and Blast Furnace Slag Ternary Binders},
author = {Ahmed Zeraoui and Walid Maherzi and Mahfoud Benzerzour and Nor Edine Abriak and Georges Aouad},
url = {https://imt-nord-europe.hal.science/hal-04007498},
doi = {10.3390/buildings13020333},
year = {2023},
date = {2023-02-01},
urldate = {2023-02-01},
journal = {Buildings},
volume = {13},
number = {2},
pages = {333},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Zentar, Rachid Les méthodes issues de l'intelligence artificielle au service de l'ingénieur : Applications aux matériaux de construction Dans: Academic Journal of Civil Engineering, 2023, (ACL). Liens @article{zentar:hal-04300033,
title = {Les méthodes issues de l'intelligence artificielle au service de l'ingénieur : Applications aux matériaux de construction},
author = {Rachid Zentar},
url = {https://hal.science/hal-04300033},
doi = {10.26168/ajce.41.2.5},
year = {2023},
date = {2023-01-01},
urldate = {2023-01-01},
journal = {Academic Journal of Civil Engineering},
publisher = {Association Universitaire de Génie Civil},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Wang, Hongwei; Zentar, Rachid; Wang, Dongxing Rheological Characterization of Fine-Grained Sediments under Steady and Dynamic Conditions Dans: International Journal of Geomechanics, 2023, (ACL). Liens @article{wang:hal-04095735,
title = {Rheological Characterization of Fine-Grained Sediments under Steady and Dynamic Conditions},
author = {Hongwei Wang and Rachid Zentar and Dongxing Wang},
url = {https://hal.science/hal-04095735},
doi = {10.1061/(ASCE)GM.1943-5622.0002243},
year = {2023},
date = {2023-01-01},
urldate = {2023-01-01},
journal = {International Journal of Geomechanics},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Bouzar, Bader; Mamindy-Pajany, Yannick Immobilization study of As, Cr, Mo, Pb, Sb, Se and Zn in geopolymer matrix: application to shooting range soil and biomass fly ash Dans: International Journal of Environmental Science and Technology, vol. 20, no. 11, p. 11891-11912, 2023, (ACL). Liens @article{bouzar:hal-04327467,
title = {Immobilization study of As, Cr, Mo, Pb, Sb, Se and Zn in geopolymer matrix: application to shooting range soil and biomass fly ash},
author = {Bader Bouzar and Yannick Mamindy-Pajany},
url = {https://hal.science/hal-04327467},
doi = {10.1007/s13762-023-04788-x},
year = {2023},
date = {2023-01-01},
urldate = {2023-01-01},
journal = {International Journal of Environmental Science and Technology},
volume = {20},
number = {11},
pages = {11891-11912},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER2 Auteurs : Lors, Christine; Gassie, Claire; Guyoneaud, Remy; Damidot, Denis Impact of a biorepair treatment on the diversity of calcifying bacterial communities at the surface of cracked concrete walls Dans: Applied Microbiology and Biotechnology, vol. 107, no. 1, p. 187-200, 2023, (ACL). Liens @article{lors:hal-03906115,
title = {Impact of a biorepair treatment on the diversity of calcifying bacterial communities at the surface of cracked concrete walls},
author = {Christine Lors and Claire Gassie and Remy Guyoneaud and Denis Damidot},
url = {https://hal-univ-pau.archives-ouvertes.fr/hal-03906115},
doi = {10.1007/s00253-022-12313-2},
year = {2023},
date = {2023-01-01},
urldate = {2023-01-01},
journal = {Applied Microbiology and Biotechnology},
volume = {107},
number = {1},
pages = {187-200},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Proceedings Article ER2 Auteurs : Alloul, Ali; Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine High performance mortar using flash calcined materials Dans: NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité, IMT Mines Al`es and LMGC and LIFAM Montpellier, France, 2022, (ACTI). Liens @inproceedings{alloul:hal-03879522,
title = {High performance mortar using flash calcined materials},
author = {Ali Alloul and Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03879522},
year = {2022},
date = {2022-11-01},
urldate = {2022-11-01},
booktitle = {NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité},
address = {Montpellier, France},
organization = {IMT Mines Al`es and LMGC and LIFAM},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2022Proceedings Article ER2 Auteurs : Thib, Raghed Al; Bouarroudj, Mohamed Elkarim; Belayachi, Naima; Bulteel, David; Rémond, Sébastien Comportement à l'état durci des mortiers imprimables à base de sable recyclé Dans: NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité, IMT Mines Alès and LMGC and LIFAM Montpellier, France, 2022, (ACTI). Liens @inproceedings{althib:hal-03881232,
title = {Comportement à l'état durci des mortiers imprimables à base de sable recyclé},
author = {Raghed Al Thib and Mohamed Elkarim Bouarroudj and Naima Belayachi and David Bulteel and Sébastien Rémond},
url = {https://hal.archives-ouvertes.fr/hal-03881232},
year = {2022},
date = {2022-11-01},
urldate = {2022-11-01},
booktitle = {NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité},
address = {Montpellier, France},
organization = {IMT Mines Alès and LMGC and LIFAM},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2022Proceedings Article ER2 Auteurs : Hynek, Estelle; Bulteel, David; Antoine, Urquizar; Rémond, Sébastien Formulation et caractérisation d'une encre cimentaire à faible impact carbone pour l'impression 3D Dans: NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité, IMT Mines Al`es and LMGC and LIFAM Montpellier, France, 2022, (ACTI). Liens @inproceedings{hynek:hal-03879722,
title = {Formulation et caractérisation d'une encre cimentaire à faible impact carbone pour l'impression 3D},
author = {Estelle Hynek and David Bulteel and Urquizar Antoine and Sébastien Rémond},
url = {https://hal.archives-ouvertes.fr/hal-03879722},
year = {2022},
date = {2022-11-01},
urldate = {2022-11-01},
booktitle = {NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité},
address = {Montpellier, France},
organization = {IMT Mines Al`es and LMGC and LIFAM},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2022Proceedings Article ER2 Auteurs : Chabannes, Morgan; Kourtaa, Salim; Becquart, Frédéric; Abriak, Nor-Edine Liants chaux-sédiment : effet de la composition minéralogique et de la teneur en chaux Dans: NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité, IMT Mines Al`es and LMGC and LIFAM Montpellier, France, 2022, (ACTI). Liens @inproceedings{chabannes:hal-03879629,
title = {Liants chaux-sédiment : effet de la composition minéralogique et de la teneur en chaux},
author = {Morgan Chabannes and Salim Kourtaa and Frédéric Becquart and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03879629},
year = {2022},
date = {2022-11-01},
urldate = {2022-11-01},
booktitle = {NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité},
address = {Montpellier, France},
organization = {IMT Mines Al`es and LMGC and LIFAM},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2022Proceedings Article ER2 Auteurs : Bouarroudj, Mohamed El Karim; Thib, Raghed Al; Belayachi, Naima; Bulteel, David; Rémond, Sébastien Contrôle de l'eau efficace dans les mortiers imprimables en 3D fabriqués avec des granulats de béton recyclé Dans: NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité, IMT Mines Al`es and LMGC and LIFAM Montpellier, France, 2022, (ACTI). Liens @inproceedings{bouarroudj:hal-03881311,
title = {Contrôle de l'eau efficace dans les mortiers imprimables en 3D fabriqués avec des granulats de béton recyclé},
author = {Mohamed El Karim Bouarroudj and Raghed Al Thib and Naima Belayachi and David Bulteel and Sébastien Rémond},
url = {https://hal.archives-ouvertes.fr/hal-03881311},
year = {2022},
date = {2022-11-01},
urldate = {2022-11-01},
booktitle = {NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité},
address = {Montpellier, France},
organization = {IMT Mines Al`es and LMGC and LIFAM},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2022Proceedings Article ER2 Auteurs : Almokdad, Mohammad; Zentar, Rachid Assessing the toxicity of virgin aggregates leachate versus dredged sediments leachate in backfill application Dans: NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité, IMT Mines Al`es and LMGC and LIFAM Montpellier, France, 2022, (ACTI). Liens @inproceedings{almokdad:hal-03880938,
title = {Assessing the toxicity of virgin aggregates leachate versus dredged sediments leachate in backfill application},
author = {Mohammad Almokdad and Rachid Zentar},
url = {https://hal.mines-ales.fr/hal-03880938},
year = {2022},
date = {2022-11-01},
urldate = {2022-11-01},
booktitle = {NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité},
address = {Montpellier, France},
organization = {IMT Mines Al`es and LMGC and LIFAM},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2022Article de journal ER2 Auteurs : Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine Designing Efficient Flash-Calcined Sediment-Based Ecobinders Dans: Materials, vol. 15, no. 20, p. 7107, 2022, (ACL). Liens @article{amar:hal-04168060,
title = {Designing Efficient Flash-Calcined Sediment-Based Ecobinders},
author = {Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168060},
doi = {10.3390/ma15207107},
year = {2022},
date = {2022-10-01},
urldate = {2022-10-01},
journal = {Materials},
volume = {15},
number = {20},
pages = {7107},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Amar, Mouhamadou; Benzerzour, Mahfoud; Zentar, Rachid; Abriak, Nor-Edine Prediction of the Compressive Strength of Waste-Based Concretes Using Artificial Neural Network Dans: Materials, vol. 15, no. 20, p. 7045, 2022, (ACL). Liens @article{amar:hal-04168045,
title = {Prediction of the Compressive Strength of Waste-Based Concretes Using Artificial Neural Network},
author = {Mouhamadou Amar and Mahfoud Benzerzour and Rachid Zentar and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168045},
doi = {10.3390/ma15207045},
year = {2022},
date = {2022-10-01},
urldate = {2022-10-01},
journal = {Materials},
volume = {15},
number = {20},
pages = {7045},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Book Section ER2 Auteurs : Zentar, Rachid; Almokdad, Mohammad Valorization of Treated Dredged Sediments in Light of Life Cycle Assessment Dans: CIGOS 2021, Emerging Technologies and Applications for Green Infrastructure, vol. 203, p. 949-955, Springer Nature Singapore, 2022, (ACL). Liens @incollection{zentar:hal-04300229,
title = {Valorization of Treated Dredged Sediments in Light of Life Cycle Assessment},
author = {Rachid Zentar and Mohammad Almokdad},
url = {https://hal.science/hal-04300229},
doi = {10.1007/978-981-16-7160-9_96},
year = {2022},
date = {2022-10-01},
urldate = {2022-10-01},
booktitle = {CIGOS 2021, Emerging Technologies and Applications for Green Infrastructure},
volume = {203},
pages = {949-955},
publisher = {Springer Nature Singapore},
series = {Lecture Notes in Civil Engineering},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {incollection}
}
|
2022Article de journal ER2 Auteurs : Amar, Mouhamadou; Benzerzour, Mahfoud; Zentar, R.; Abriak, Nor-Edine Prediction of the Compressive Strength of Waste-Based Concretes Using Artificial Neural Network Dans: Materials, vol. 15, no. 20, p. 7045, 2022. Liens @article{amar:hal-04168045b,
title = {Prediction of the Compressive Strength of Waste-Based Concretes Using Artificial Neural Network},
author = {Mouhamadou Amar and Mahfoud Benzerzour and R. Zentar and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168045},
doi = {10.3390/ma15207045},
year = {2022},
date = {2022-10-01},
journal = {Materials},
volume = {15},
number = {20},
pages = {7045},
publisher = {MDPI},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Chabannes, Morgan; Kazemi-Kamyab, Hadi; Trigallez, Johan; Snellings, Ruben Performance and microstructure development of lime - calcined fluvial sediment binders under different curing conditions Dans: Cement and Concrete Research, vol. 160, p. 106903, 2022, (ACL). Liens @article{chabannes:hal-03727650,
title = {Performance and microstructure development of lime - calcined fluvial sediment binders under different curing conditions},
author = {Morgan Chabannes and Hadi Kazemi-Kamyab and Johan Trigallez and Ruben Snellings},
url = {https://hal.archives-ouvertes.fr/hal-03727650},
doi = {10.1016/j.cemconres.2022.106903},
year = {2022},
date = {2022-10-01},
urldate = {2022-10-01},
journal = {Cement and Concrete Research},
volume = {160},
pages = {106903},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Bouaich, Fatima Zahra; Maherzi, Walid; Benzerzour, Mahfoud; Taleb, Mustapha; Abriak, Nor-Edine; Rais, Zakia; Senouci, Ahmed Mortar mixing using treated wastewater feasibility Dans: Construction and Building Materials, vol. 352, p. 128983, 2022, (ACL). Liens @article{zahrabouaich:hal-04168038,
title = {Mortar mixing using treated wastewater feasibility},
author = {Fatima Zahra Bouaich and Walid Maherzi and Mahfoud Benzerzour and Mustapha Taleb and Nor-Edine Abriak and Zakia Rais and Ahmed Senouci},
url = {https://imt-nord-europe.hal.science/hal-04168038},
doi = {10.1016/j.conbuildmat.2022.128983},
year = {2022},
date = {2022-10-01},
urldate = {2022-10-01},
journal = {Construction and Building Materials},
volume = {352},
pages = {128983},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Daher, Jana; Kleib, Joelle; Benzerzour, Mahfoud; Abriak, Nor-Edine; Aouad, Georges Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing Dans: Buildings, vol. 12, no. 9, p. 1400, 2022, (ACL). Liens @article{daher:hal-04168070,
title = {Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing},
author = {Jana Daher and Joelle Kleib and Mahfoud Benzerzour and Nor-Edine Abriak and Georges Aouad},
url = {https://imt-nord-europe.hal.science/hal-04168070},
doi = {10.3390/buildings12091400},
year = {2022},
date = {2022-09-01},
urldate = {2022-09-01},
journal = {Buildings},
volume = {12},
number = {9},
pages = {1400},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Kleib, Joelle; Amar, Mouhamadou; Aouad, Georges; Bourbon, Xavier; Benzerzour, Mahfoud; Abriak, Nor-Edine The Use of Callovo-Oxfordian Argillite as a Raw Material for Portland Cement Clinker Production Dans: Buildings, vol. 12, no. 9, p. 1421, 2022, (ACL). Liens @article{kleib:hal-04168065,
title = {The Use of Callovo-Oxfordian Argillite as a Raw Material for Portland Cement Clinker Production},
author = {Joelle Kleib and Mouhamadou Amar and Georges Aouad and Xavier Bourbon and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168065},
doi = {10.3390/buildings12091421},
year = {2022},
date = {2022-09-01},
urldate = {2022-09-01},
journal = {Buildings},
volume = {12},
number = {9},
pages = {1421},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Bouzar, Bader; Mamindy-Pajany, Yannick Phosphorus removal from real and synthetic wastewater using biomass bottom ash Dans: International Journal of Environmental Science and Technology, vol. 20, no. 7, p. 7065-7082, 2022, (ACL). Liens @article{bouzar:hal-04326938,
title = {Phosphorus removal from real and synthetic wastewater using biomass bottom ash},
author = {Bader Bouzar and Yannick Mamindy-Pajany},
url = {https://hal.science/hal-04326938},
doi = {10.1007/s13762-022-04451-x},
year = {2022},
date = {2022-08-01},
urldate = {2022-08-01},
journal = {International Journal of Environmental Science and Technology},
volume = {20},
number = {7},
pages = {7065-7082},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Bouzar, Bader; Mamindy-Pajany, Yannick Manufacture and characterization of carbonated lightweight aggregates from waste paper fly ash Dans: Powder Technology, vol. 406, p. 117583, 2022, (ACL). Liens @article{bouzar:hal-04321944,
title = {Manufacture and characterization of carbonated lightweight aggregates from waste paper fly ash},
author = {Bader Bouzar and Yannick Mamindy-Pajany},
url = {https://univ-artois.hal.science/hal-04321944},
doi = {10.1016/j.powtec.2022.117583},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Powder Technology},
volume = {406},
pages = {117583},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Kourtaa, Salim; Chabannes, Morgan; Becquart, Frédéric; Abriak, Nor-Edine Evaluation of marine dredged sediment as reactive powder compared to ground basaltic pyroclastic materials for the development of eco-friendly lime-pozzolan binders Dans: Cement and Concrete Composites, vol. 130, p. 104553, 2022, (ACL). Liens @article{kourtaa:hal-03651910,
title = {Evaluation of marine dredged sediment as reactive powder compared to ground basaltic pyroclastic materials for the development of eco-friendly lime-pozzolan binders},
author = {Salim Kourtaa and Morgan Chabannes and Frédéric Becquart and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03651910},
doi = {10.1016/j.cemconcomp.2022.104553},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Cement and Concrete Composites},
volume = {130},
pages = {104553},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Thiéry, Vincent; Dubois, Emmanuel; Bellayer, Séverine The good, the bad and the ugly polishing: Effect of abrasive size on standardless EDS analysis of Portland cement clinker's calcium silicates Dans: Micron, vol. 158, p. 103266, 2022, (ACL). Liens @article{thiery:hal-03662917,
title = {The good, the bad and the ugly polishing: Effect of abrasive size on standardless EDS analysis of Portland cement clinker's calcium silicates},
author = {Vincent Thiéry and Emmanuel Dubois and Séverine Bellayer},
url = {https://hal.archives-ouvertes.fr/hal-03662917},
doi = {10.1016/j.micron.2022.103266},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Micron},
volume = {158},
pages = {103266},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Mazian, Brahim; Wirquin, Eric; Aguibi, Kawther; Martin, Patrick; Chaveriat, Ludovic; Dubois, Vincent Effect of mixing conditions on the density, morphology, thermal and mechanical properties of mineral foam Dans: Journal of Building Engineering, vol. 52, p. 104410, 2022, (ACL). Liens @article{mazian:hal-03697703,
title = {Effect of mixing conditions on the density, morphology, thermal and mechanical properties of mineral foam},
author = {Brahim Mazian and Eric Wirquin and Kawther Aguibi and Patrick Martin and Ludovic Chaveriat and Vincent Dubois},
url = {https://hal-univ-artois.archives-ouvertes.fr/hal-03697703},
doi = {10.1016/j.jobe.2022.104410},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Journal of Building Engineering},
volume = {52},
pages = {104410},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Wang, Hongwei; Zentar, Rachid; Wang, Dongxing; Ouendi, Fatima New Applications of Ordinary Portland and Calcium Sulfoaluminate Composite Binder for Recycling Dredged Marine Sediments as Road Materials Dans: International Journal of Geomechanics, 2022, (ACL). Liens @article{wang:hal-04095721,
title = {New Applications of Ordinary Portland and Calcium Sulfoaluminate Composite Binder for Recycling Dredged Marine Sediments as Road Materials},
author = {Hongwei Wang and Rachid Zentar and Dongxing Wang and Fatima Ouendi},
url = {https://hal.science/hal-04095721},
doi = {10.1061/(ASCE)GM.1943-5622.0002373},
year = {2022},
date = {2022-06-01},
urldate = {2022-06-01},
journal = {International Journal of Geomechanics},
publisher = {American Society of Civil Engineers},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Chu, Duc Chinh; Amar, Mouhamadou; Kleib, Joelle; Benzerzour, Mahfoud; Betrancourt, Damien; Abriak, Nor-Edine; Nadah, Jaouad The Pozzolanic Activity of Sediments Treated by the Flash Calcination Method Dans: Waste and Biomass Valorization, 2022, (ACL). Liens @article{chu:hal-03767001,
title = {The Pozzolanic Activity of Sediments Treated by the Flash Calcination Method},
author = {Duc Chinh Chu and Mouhamadou Amar and Joelle Kleib and Mahfoud Benzerzour and Damien Betrancourt and Nor-Edine Abriak and Jaouad Nadah},
url = {https://hal.archives-ouvertes.fr/hal-03767001},
doi = {10.1007/s12649-022-01789-8},
year = {2022},
date = {2022-06-01},
urldate = {2022-06-01},
journal = {Waste and Biomass Valorization},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Zhao, Zengfeng; Xiao, Jianzhuang; Damidot, Denis; Rémond, Sébastien; Bulteel, David; Courard, Luc Quantification of the Hardened Cement Paste Content in Fine Recycled Concrete Aggregates by Means of Salicylic Acid Dissolution Dans: Materials, vol. 15, no. 9, p. 3384, 2022, (ACL). Liens @article{zhao:hal-04108048,
title = {Quantification of the Hardened Cement Paste Content in Fine Recycled Concrete Aggregates by Means of Salicylic Acid Dissolution},
author = {Zengfeng Zhao and Jianzhuang Xiao and Denis Damidot and Sébastien Rémond and David Bulteel and Luc Courard},
url = {https://hal.science/hal-04108048},
doi = {10.3390/ma15093384},
year = {2022},
date = {2022-05-01},
urldate = {2022-05-01},
journal = {Materials},
volume = {15},
number = {9},
pages = {3384},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Omar, Hassan Moulay; Zentar, Rachid; Akacem, Mustapha; Mekerta, Belkacem; Mouli, Mohamed Co-valorization of Tuff and Sandy Residues in Roads Construction Dans: Open Civil Engineering Journal, vol. 8, no. 5, p. 1029-1045, 2022, (ACL). Liens @article{moulayomar:hal-03851556,
title = {Co-valorization of Tuff and Sandy Residues in Roads Construction},
author = {Hassan Moulay Omar and Rachid Zentar and Mustapha Akacem and Belkacem Mekerta and Mohamed Mouli},
url = {https://hal.archives-ouvertes.fr/hal-03851556},
doi = {10.28991/CEJ-2022-08-05-013},
year = {2022},
date = {2022-05-01},
urldate = {2022-05-01},
journal = {Open Civil Engineering Journal},
volume = {8},
number = {5},
pages = {1029-1045},
publisher = {Bentham Open},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Moueden, Hamza; Amar, Mouhamadou; Zambon, Agnès; Benzerzour, Mahfoud; Abriak, Nor-Edine The Use of Dredged Marine Sediment in the Formulation of Air-Foam Concrete Dans: Waste and Biomass Valorization, vol. 13, no. 5, p. 2591-2607, 2022, (ACL). Liens @article{moueden:hal-03764619,
title = {The Use of Dredged Marine Sediment in the Formulation of Air-Foam Concrete},
author = {Hamza Moueden and Mouhamadou Amar and Agnès Zambon and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03764619},
doi = {10.1007/s12649-021-01650-4},
year = {2022},
date = {2022-05-01},
urldate = {2022-05-01},
journal = {Waste and Biomass Valorization},
volume = {13},
number = {5},
pages = {2591-2607},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Conférence ER2 Auteurs : Courtois, Nicolas; Coumes, Celine Cau Dit; Poulesquen, Arnaud; Haas, Jeremy; Hassine, Seif Ben Hadj; Bulteel, David Study of alkali-silica reaction occurring in cemented waste packages based on simplified model and concrete medium approaches NUWCEM 2022 - International Symposium on Cement-Based Materials for Nuclear Wastes, Avignon, France, 2022, (ACTI). Liens @conference{courtois:cea-03667888,
title = {Study of alkali-silica reaction occurring in cemented waste packages based on simplified model and concrete medium approaches},
author = {Nicolas Courtois and Celine Cau Dit Coumes and Arnaud Poulesquen and Jeremy Haas and Seif Ben Hadj Hassine and David Bulteel},
url = {https://hal-cea.archives-ouvertes.fr/cea-03667888},
year = {2022},
date = {2022-05-01},
urldate = {2022-05-01},
booktitle = {NUWCEM 2022 - International Symposium on Cement-Based Materials for Nuclear Wastes},
address = {Avignon, France},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2022Article de journal ER2 Auteurs : Chu, Duc Chinh; Kleib, Joelle; Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine Recycling of dredged sediment as a raw material for the manufacture of Portland cement -- Numerical modeling of the hydration of synthesized cement using the CEMHYD3D code Dans: Journal of Building Engineering, vol. 48, p. 103871, 2022, (ACL). Liens @article{chu:hal-03766505,
title = {Recycling of dredged sediment as a raw material for the manufacture of Portland cement -- Numerical modeling of the hydration of synthesized cement using the CEMHYD3D code},
author = {Duc Chinh Chu and Joelle Kleib and Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03766505},
doi = {10.1016/j.jobe.2021.103871},
year = {2022},
date = {2022-05-01},
urldate = {2022-05-01},
journal = {Journal of Building Engineering},
volume = {48},
pages = {103871},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Brahim, Mohamedou; Ndiaye, Khadim; Aggoun, Salima; Maherzi, Walid Valorization of Dredged Sediments in Manufacturing Compressed Earth Blocks Stabilized by Alkali-Activated Fly Ash Binder Dans: Buildings, vol. 12, no. 4, p. 419, 2022, (ACL). Liens @article{brahim:hal-03766939,
title = {Valorization of Dredged Sediments in Manufacturing Compressed Earth Blocks Stabilized by Alkali-Activated Fly Ash Binder},
author = {Mohamedou Brahim and Khadim Ndiaye and Salima Aggoun and Walid Maherzi},
url = {https://hal.archives-ouvertes.fr/hal-03766939},
doi = {10.3390/buildings12040419},
year = {2022},
date = {2022-04-01},
urldate = {2022-04-01},
journal = {Buildings},
volume = {12},
number = {4},
pages = {419},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Zouch, Afef; Mamindy-Pajany, Yannick; Bouchikhi, Abdelhadi; Abriak, Nor-Edine; Ksibi, Mohamed Valorization of marine sediments in geopolymer mortars: physico-mechanical, microstructural and environmental investigations at laboratory scale Dans: Journal of Material Cycles and Waste Management, vol. 24, no. 3, p. 1109-1123, 2022, (ACL). Liens @article{zouch:hal-04327448,
title = {Valorization of marine sediments in geopolymer mortars: physico-mechanical, microstructural and environmental investigations at laboratory scale},
author = {Afef Zouch and Yannick Mamindy-Pajany and Abdelhadi Bouchikhi and Nor-Edine Abriak and Mohamed Ksibi},
url = {https://hal.science/hal-04327448},
doi = {10.1007/s10163-022-01382-0},
year = {2022},
date = {2022-03-01},
urldate = {2022-03-01},
journal = {Journal of Material Cycles and Waste Management},
volume = {24},
number = {3},
pages = {1109-1123},
publisher = {Springer Verlag (Germany)},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Belayali, Fouad; Maherzi, Walid; Benzerzour, Mahfoud; Abriak, Nor-Edine; Senouci, Ahmed Compressed Earth Blocks Using Sediments and Alkali-Activated Byproducts Dans: Sustainability, vol. 14, no. 6, p. 3158, 2022, (ACL). Liens @article{belayali:hal-03767092,
title = {Compressed Earth Blocks Using Sediments and Alkali-Activated Byproducts},
author = {Fouad Belayali and Walid Maherzi and Mahfoud Benzerzour and Nor-Edine Abriak and Ahmed Senouci},
url = {https://hal.archives-ouvertes.fr/hal-03767092},
doi = {10.3390/su14063158},
year = {2022},
date = {2022-03-01},
urldate = {2022-03-01},
journal = {Sustainability},
volume = {14},
number = {6},
pages = {3158},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Bouchikhi, Abdelhadi; Safhi, Amine El Mahdi; Rivard, Patrice; Snellings, Ruben; Abriak, Nor-Edine Fluvial Sediments as SCMs: Characterization, Pozzolanic Performance, and Optimization of Equivalent Binder Dans: Journal of Materials in Civil Engineering, vol. 34, no. 2, 2022, (ACL). Liens @article{bouchikhi:hal-04321984,
title = {Fluvial Sediments as SCMs: Characterization, Pozzolanic Performance, and Optimization of Equivalent Binder},
author = {Abdelhadi Bouchikhi and Amine El Mahdi Safhi and Patrice Rivard and Ruben Snellings and Nor-Edine Abriak},
url = {https://univ-artois.hal.science/hal-04321984},
doi = {10.1061/(ASCE)MT.1943-5533.0004071},
year = {2022},
date = {2022-02-01},
urldate = {2022-02-01},
journal = {Journal of Materials in Civil Engineering},
volume = {34},
number = {2},
publisher = {American Society of Civil Engineers},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Wang, Hongwei; Zentar, Rachid; Wang, Dongxing Predicting the compaction parameters of solidified dredged fine sediments with statistical approach Dans: Marine Georesources and Geotechnology, p. 1-16, 2022, (ACL). Liens @article{wang:hal-03772387,
title = {Predicting the compaction parameters of solidified dredged fine sediments with statistical approach},
author = {Hongwei Wang and Rachid Zentar and Dongxing Wang},
url = {https://hal.archives-ouvertes.fr/hal-03772387},
doi = {10.1080/1064119X.2021.2023827},
year = {2022},
date = {2022-01-01},
urldate = {2022-01-01},
journal = {Marine Georesources and Geotechnology},
pages = {1-16},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Almokdad, Mohammad; Zentar, Rachid Carbon footprint of dredged sediments and virgin aggregates in a road case study Dans: Academic Journal of Civil Engineering, 2022, (ACL). Liens @article{almokdad:hal-04300254,
title = {Carbon footprint of dredged sediments and virgin aggregates in a road case study},
author = {Mohammad Almokdad and Rachid Zentar},
url = {https://hal.science/hal-04300254},
doi = {10.26168/ajce.40.1.38},
year = {2022},
date = {2022-01-01},
urldate = {2022-01-01},
journal = {Academic Journal of Civil Engineering},
publisher = {Association Universitaire de Génie Civil},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Bouaich, Fatima Zahra; Maherzi, W.; El-Hajjaji, Fadoua; Abriak, Nor-Edine; Benzerzour, Mahfoud; Taleb, Mustapha; Rais, Zakia Reuse of treated wastewater and non-potable groundwater in the manufacture of concrete: major challenge of environmental preservation Dans: Environmental Science and Pollution Research, vol. 29, no. 1, p. 146-157, 2022, (ACL). Liens @article{bouaich:hal-04168073,
title = {Reuse of treated wastewater and non-potable groundwater in the manufacture of concrete: major challenge of environmental preservation},
author = {Fatima Zahra Bouaich and W. Maherzi and Fadoua El-Hajjaji and Nor-Edine Abriak and Mahfoud Benzerzour and Mustapha Taleb and Zakia Rais},
url = {https://imt-nord-europe.hal.science/hal-04168073},
doi = {10.1007/s11356-021-15561-3},
year = {2022},
date = {2022-01-01},
urldate = {2022-01-01},
journal = {Environmental Science and Pollution Research},
volume = {29},
number = {1},
pages = {146-157},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER2 Auteurs : Bouaich, Fatima Zahra; Maherzi, Walid; El-Hajjaji, Fadoua; Abriak, Nor-Edine; Benzerzour, Mahfoud; Taleb, Mustapha; Rais, Zakia Reuse of treated wastewater and non-potable groundwater in the manufacture of concrete: major challenge of environmental preservation Dans: Environmental Science and Pollution Research, vol. 29, no. 1, p. 146-157, 2022, (ACL). Liens @article{bouaich:hal-04168073b,
title = {Reuse of treated wastewater and non-potable groundwater in the manufacture of concrete: major challenge of environmental preservation},
author = {Fatima Zahra Bouaich and Walid Maherzi and Fadoua El-Hajjaji and Nor-Edine Abriak and Mahfoud Benzerzour and Mustapha Taleb and Zakia Rais},
url = {https://imt-nord-europe.hal.science/hal-04168073},
doi = {10.1007/s11356-021-15561-3},
year = {2022},
date = {2022-01-01},
urldate = {2022-01-01},
journal = {Environmental Science and Pollution Research},
volume = {29},
number = {1},
pages = {146-157},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Chu, Duc Chinh; Kleib, Joelle; Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine Determination of the degree of hydration of Portland cement using three different approaches: Scanning electron microscopy (SEM-BSE) and Thermogravimetric analysis (TGA) Dans: Case Studies in Construction Materials, vol. 15, p. e00754, 2021, (ACL). Liens @article{chu:hal-03770251,
title = {Determination of the degree of hydration of Portland cement using three different approaches: Scanning electron microscopy (SEM-BSE) and Thermogravimetric analysis (TGA)},
author = {Duc Chinh Chu and Joelle Kleib and Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03770251},
doi = {10.1016/j.cscm.2021.e00754},
year = {2021},
date = {2021-12-01},
urldate = {2021-12-01},
journal = {Case Studies in Construction Materials},
volume = {15},
pages = {e00754},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Kleib, Joelle; Aouad, Georges; Abriak, Nor-Edine; Benzerzour, Mahfoud Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom Ash Dans: Case Studies in Construction Materials, vol. 15, p. e00629, 2021, (ACL). Liens @article{kleib:hal-03363618,
title = {Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom Ash},
author = {Joelle Kleib and Georges Aouad and Nor-Edine Abriak and Mahfoud Benzerzour},
url = {https://hal.archives-ouvertes.fr/hal-03363618},
doi = {10.1016/j.cscm.2021.e00629},
year = {2021},
date = {2021-12-01},
urldate = {2021-12-01},
journal = {Case Studies in Construction Materials},
volume = {15},
pages = {e00629},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Larbi, Sihem; Khaldi, Abdelkrim; Maherzi, Walid; Abriak, Nor-Edine Formulation of Compressed Earth Blocks Stabilized by Glass Waste Activated with NaOH Solution Dans: Sustainability, vol. 14, no. 1, p. 102, 2021, (ACL). Liens @article{larbi:hal-04322007,
title = {Formulation of Compressed Earth Blocks Stabilized by Glass Waste Activated with NaOH Solution},
author = {Sihem Larbi and Abdelkrim Khaldi and Walid Maherzi and Nor-Edine Abriak},
url = {https://hal.science/hal-04322007},
doi = {10.3390/su14010102},
year = {2021},
date = {2021-12-01},
urldate = {2021-12-01},
journal = {Sustainability},
volume = {14},
number = {1},
pages = {102},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Ouédraogo, Nongwendé Philippe; Becquart, Frédéric; Benzerzour, Mahfoud; Abriak, Nor-Edine Influence of fine sediments on rheology properties of self-compacting concretes Dans: Powder Technology, vol. 392, p. 544-557, 2021, (ACL). Liens @article{ouedraogo:hal-04168098,
title = {Influence of fine sediments on rheology properties of self-compacting concretes},
author = {Nongwendé Philippe Ouédraogo and Frédéric Becquart and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168098},
doi = {10.1016/j.powtec.2021.07.035},
year = {2021},
date = {2021-11-01},
urldate = {2021-11-01},
journal = {Powder Technology},
volume = {392},
pages = {544-557},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Karam, Reine; Becquart, Frederic; Abriak, Nor-Edine; Khouja, Hicham Vapothermal curing of hemp shives: Influence on some chemical and physical properties Dans: Industrial Crops and Products, vol. 171, p. 113870, 2021, (ACL). Liens @article{karam:hal-03772263,
title = {Vapothermal curing of hemp shives: Influence on some chemical and physical properties},
author = {Reine Karam and Frederic Becquart and Nor-Edine Abriak and Hicham Khouja},
url = {https://hal.archives-ouvertes.fr/hal-03772263},
doi = {10.1016/j.indcrop.2021.113870},
year = {2021},
date = {2021-11-01},
urldate = {2021-11-01},
journal = {Industrial Crops and Products},
volume = {171},
pages = {113870},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Kleib, Joelle; Aouad, Georges; Benzerzour, Mahfoud; Zakhour, Mirvat; Abriak, Nor-Edine Effect of calcium sulfoaluminate cements composition on their durability Dans: Construction and Building Materials, vol. 307, p. 124952, 2021, (ACL). Liens @article{kleib:hal-03772496,
title = {Effect of calcium sulfoaluminate cements composition on their durability},
author = {Joelle Kleib and Georges Aouad and Mahfoud Benzerzour and Mirvat Zakhour and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03772496},
doi = {10.1016/j.conbuildmat.2021.124952},
year = {2021},
date = {2021-11-01},
urldate = {2021-11-01},
journal = {Construction and Building Materials},
volume = {307},
pages = {124952},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Zhao, Zengfeng; Grellier, Adèle; Bouarroudj, Mohamed El Karim; Michel, Frédéric; Bulteel, David; Courard, Luc Substitution of limestone filler by waste brick powder in self-compacting mortars: Properties and durability Dans: Journal of Building Engineering, vol. 43, p. 102898, 2021, (ACL). Liens @article{zhao:hal-03772616,
title = {Substitution of limestone filler by waste brick powder in self-compacting mortars: Properties and durability},
author = {Zengfeng Zhao and Adèle Grellier and Mohamed El Karim Bouarroudj and Frédéric Michel and David Bulteel and Luc Courard},
url = {https://hal.archives-ouvertes.fr/hal-03772616},
doi = {10.1016/j.jobe.2021.102898},
year = {2021},
date = {2021-11-01},
urldate = {2021-11-01},
journal = {Journal of Building Engineering},
volume = {43},
pages = {102898},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Ahmat, Adoum Mahamat; Maherzi, Walid; Milbeau, Claude Le; Benzerzour, Mahfoud; Abriak, Nor-Edine Modified Red Muds and Slag Based Hydraulic Binders for Zn Removal: A Matrix-Spiking Approach Applied on Clayey Sediments Dans: Minerals, vol. 11, no. 11, p. 1189, 2021, (ACL). Liens @article{mahamatahmat:insu-03469324,
title = {Modified Red Muds and Slag Based Hydraulic Binders for Zn Removal: A Matrix-Spiking Approach Applied on Clayey Sediments},
author = {Adoum Mahamat Ahmat and Walid Maherzi and Claude Le Milbeau and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal-insu.archives-ouvertes.fr/insu-03469324},
doi = {10.3390/min11111189},
year = {2021},
date = {2021-11-01},
urldate = {2021-11-01},
journal = {Minerals},
volume = {11},
number = {11},
pages = {1189},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Bellara, Selma; Hidjeb, Mustapha; Maherzi, Walid; Mezazigh, Salim; Senouci, Ahmed Optimization of an Eco-Friendly Hydraulic Road Binders Comprising Clayey Dam Sediments and Ground Granulated Blast-Furnace Slag Dans: Buildings, vol. 11, no. 10, p. 443, 2021, (ACL). Liens @article{bellara:hal-03360260,
title = {Optimization of an Eco-Friendly Hydraulic Road Binders Comprising Clayey Dam Sediments and Ground Granulated Blast-Furnace Slag},
author = {Selma Bellara and Mustapha Hidjeb and Walid Maherzi and Salim Mezazigh and Ahmed Senouci},
url = {https://hal.archives-ouvertes.fr/hal-03360260},
doi = {10.3390/buildings11100443},
year = {2021},
date = {2021-10-01},
urldate = {2021-10-01},
journal = {Buildings},
volume = {11},
number = {10},
pages = {443},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Ouédraogo, Nongwendé Philippe; Becquart, Frédéric; Benzerzour, Mahfoud; Abriak, Nor-Edine Environmental assessment, mechanical behavior, and chemical properties of self-compacting mortars (SCMs) with harbor dredged sediments to be used in construction Dans: Environmental Science and Pollution Research, vol. 28, no. 39, p. 55003-55013, 2021, (ACL). Liens @article{ouedraogo:hal-03770175,
title = {Environmental assessment, mechanical behavior, and chemical properties of self-compacting mortars (SCMs) with harbor dredged sediments to be used in construction},
author = {Nongwendé Philippe Ouédraogo and Frédéric Becquart and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03770175},
doi = {10.1007/s11356-020-12279-6},
year = {2021},
date = {2021-10-01},
urldate = {2021-10-01},
journal = {Environmental Science and Pollution Research},
volume = {28},
number = {39},
pages = {55003-55013},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Moudjari, Messaoud; Marouf, Hafida; Muhamad, Hameed; Chaalal, Omar; Mequignon, Marc; Maherzi, Walid; Benzerzour, Mahfoud Using Local Materials to Optimize the Eco-design of a Resilient Urban Environment in Sustainable Urban Project Process Dans: Journal of Civil Engineering and Architecture, vol. 9, no. 6, p. 2084-2097, 2021, (ACL). Liens @article{moudjari:hal-04168092,
title = {Using Local Materials to Optimize the Eco-design of a Resilient Urban Environment in Sustainable Urban Project Process},
author = {Messaoud Moudjari and Hafida Marouf and Hameed Muhamad and Omar Chaalal and Marc Mequignon and Walid Maherzi and Mahfoud Benzerzour},
url = {https://imt-nord-europe.hal.science/hal-04168092},
doi = {10.13189/cea.2021.090636},
year = {2021},
date = {2021-10-01},
urldate = {2021-10-01},
journal = {Journal of Civil Engineering and Architecture},
volume = {9},
number = {6},
pages = {2084-2097},
publisher = {David Publishing Company},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Joubert, Johannes; Wilke, Daniel; Govender, Nicolin; Pizette, Patrick; Basic, Josip; Abriak, Nor-Edine Boundary condition enforcement for renormalised weakly compressible meshless Lagrangian methods Dans: Engineering Analysis with Boundary Elements, vol. 130, p. 332-351, 2021, (ACL). Liens @article{joubert:hal-03771218,
title = {Boundary condition enforcement for renormalised weakly compressible meshless Lagrangian methods},
author = {Johannes Joubert and Daniel Wilke and Nicolin Govender and Patrick Pizette and Josip Basic and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03771218},
doi = {10.1016/j.enganabound.2021.04.024},
year = {2021},
date = {2021-09-01},
urldate = {2021-09-01},
journal = {Engineering Analysis with Boundary Elements},
volume = {130},
pages = {332-351},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal Auteurs : Abdallah, Wafaa; SbartaÏ, Zoubir-Mehdi; Saliba, Jacqueline; Elachachi, Sidi Mohammed; Chehade, Fadi Hage; Sadek, Marwan Assessment of the reliability of concrete evaluation by multi-physical inversion of NDT measurements - A probabilistic approach Dans: Construction and Building Materials, vol. 300, p. 124371, 2021, (ACL). Liens @article{abdallah:hal-03482897,
title = {Assessment of the reliability of concrete evaluation by multi-physical inversion of NDT measurements - A probabilistic approach},
author = {Wafaa Abdallah and Zoubir-Mehdi SbartaÏ and Jacqueline Saliba and Sidi Mohammed Elachachi and Fadi Hage Chehade and Marwan Sadek},
url = {https://hal.archives-ouvertes.fr/hal-03482897},
doi = {10.1016/j.conbuildmat.2021.124371},
year = {2021},
date = {2021-09-01},
urldate = {2021-09-01},
journal = {Construction and Building Materials},
volume = {300},
pages = {124371},
publisher = {Elsevier},
note = {ACL},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
2021Conférence ER2 Auteurs : Dutra, L. Freitas; Chafei, Sawsen; Le, A. D. Tran; Langlet, T. Mechanical behavior of a cementitious composite incorporating flax fibers treated with citric acid 75th RILEM Annual Week, Merida, Mexico, 2021, (ACTI). Liens @conference{FREI2021a,
title = {Mechanical behavior of a cementitious composite incorporating flax fibers treated with citric acid},
author = {L. Freitas Dutra and Sawsen Chafei and A. D. Tran Le and T. Langlet},
url = {https://hal.archives-ouvertes.fr/hal-03551400},
year = {2021},
date = {2021-08-29},
urldate = {2021-08-01},
booktitle = {75th RILEM Annual Week},
address = {Merida, Mexico},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2021Article de journal ER2 Auteurs : Bouaich, Fatima Zahra; Maherzi, Walid; El-Hajjaji, Fadoua; Abriak, Nor-Edine; Benzerzour, Mahfoud; Taleb, Mustapha; Rais, Zakia Reuse of treated wastewater and non-potable groundwater in the manufacture of concrete: major challenge of environmental preservation Dans: Environmental Science and Pollution Research, 2021, (ACL). Liens @article{bouaich:hal-03360262,
title = {Reuse of treated wastewater and non-potable groundwater in the manufacture of concrete: major challenge of environmental preservation},
author = {Fatima Zahra Bouaich and Walid Maherzi and Fadoua El-Hajjaji and Nor-Edine Abriak and Mahfoud Benzerzour and Mustapha Taleb and Zakia Rais},
url = {https://hal.archives-ouvertes.fr/hal-03360262},
doi = {10.1007/s11356-021-15561-3},
year = {2021},
date = {2021-08-01},
urldate = {2021-08-01},
journal = {Environmental Science and Pollution Research},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Hajjami, Saadia El; Abriak, Nor-Edine; Souabi, Salah; Alami, Mohammed El +Study of metallic contamination of Oued Sebou sediments, Morocco Dans: Environmental Technology and Innovation, vol. 23, p. 101680, 2021, (ACL). Liens @article{elhajjami:hal-03772630,
title = {+Study of metallic contamination of Oued Sebou sediments, Morocco},
author = {Saadia El Hajjami and Nor-Edine Abriak and Salah Souabi and Mohammed El Alami},
url = {https://hal.archives-ouvertes.fr/hal-03772630},
doi = {10.1016/j.eti.2021.101680},
year = {2021},
date = {2021-08-01},
urldate = {2021-08-01},
journal = {Environmental Technology and Innovation},
volume = {23},
pages = {101680},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Mkahal, Zeinab; Mamindy-Pajany, Yannick; Maherzi, Walid; Abriak, Nor-Edine Recycling of Mineral Solid Wastes in Backfill Road Materials: Technical and Environmental Investigations Dans: Waste and Biomass Valorization, 2021. Liens @article{Mkahal2021,
title = {Recycling of Mineral Solid Wastes in Backfill Road Materials: Technical and Environmental Investigations},
author = {Zeinab Mkahal and Yannick Mamindy-Pajany and Walid Maherzi and Nor-Edine Abriak},
doi = {10.1007/s12649-021-01544-5},
year = {2021},
date = {2021-08-01},
journal = {Waste and Biomass Valorization},
publisher = {Springer Science and Business Media LLC},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Sadok, Rachid Hadj; Maherzi, Walid; Benzerzour, Mahfoud; Lord, Richard; Torrance, Keith; Zambon, Agnes; Abriak, Nor-Edine Mechanical Properties and Microstructure of Low Carbon Binders Manufactured from Calcined Canal Sediments and Ground Granulated Blast Furnace Slag (GGBS) Dans: Sustainability, vol. 13, no. 16, p. 9057, 2021, (ACL). Liens @article{hadjsadok:hal-03360269,
title = {Mechanical Properties and Microstructure of Low Carbon Binders Manufactured from Calcined Canal Sediments and Ground Granulated Blast Furnace Slag (GGBS)},
author = {Rachid Hadj Sadok and Walid Maherzi and Mahfoud Benzerzour and Richard Lord and Keith Torrance and Agnes Zambon and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03360269},
doi = {10.3390/su13169057},
year = {2021},
date = {2021-08-01},
urldate = {2021-08-01},
journal = {Sustainability},
volume = {13},
number = {16},
pages = {9057},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Kleib, Joelle; Aouad, Georges; Khalil, Noura; Zakhour, Mirvat Incorporation of zinc in calcium sulfoaluminate cement clinker Dans: Advances in Cement Research, vol. 33, no. 7, p. 311-317, 2021, (ACL). Liens @article{kleib:hal-03772412,
title = {Incorporation of zinc in calcium sulfoaluminate cement clinker},
author = {Joelle Kleib and Georges Aouad and Noura Khalil and Mirvat Zakhour},
url = {https://hal.archives-ouvertes.fr/hal-03772412},
doi = {10.1680/jadcr.19.00125},
year = {2021},
date = {2021-07-01},
urldate = {2021-07-01},
journal = {Advances in Cement Research},
volume = {33},
number = {7},
pages = {311-317},
publisher = {Thomas Telford},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Baz, Bilal; Aouad, Georges; Kleib, Joelle; Bulteel, David; Rémond, Sébastien Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments Dans: Construction and Building Materials, vol. 290, p. 123220, 2021, (ACL). Liens @article{Baz2021,
title = {Durability assessment and microstructural analysis of 3D printed concrete exposed to sulfuric acid environments},
author = {Bilal Baz and Georges Aouad and Joelle Kleib and David Bulteel and Sébastien Rémond},
doi = {10.1016/j.conbuildmat.2021.123220},
year = {2021},
date = {2021-07-01},
urldate = {2021-07-01},
journal = {Construction and Building Materials},
volume = {290},
pages = {123220},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Grellier, Adèle; Bulteel, David; Bouarroudj, Mohamed El Karim; Rémond, Sébastien; Zhao, Zengfeng; Courard, Luc Alternative hydraulic binder development based on brick fines: Influence of particle size and substitution rate Dans: Journal of Building Engineering, vol. 39, p. 102263, 2021, (ACL). Liens @article{Grellier2021,
title = {Alternative hydraulic binder development based on brick fines: Influence of particle size and substitution rate},
author = {Adèle Grellier and David Bulteel and Mohamed El Karim Bouarroudj and Sébastien Rémond and Zengfeng Zhao and Luc Courard},
doi = {10.1016/j.jobe.2021.102263},
year = {2021},
date = {2021-07-01},
journal = {Journal of Building Engineering},
volume = {39},
pages = {102263},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Proceedings Article ER2 Auteurs : Lecomte, T.; Mamindy-Pajany, Yannick; Lors, Christine; Abriak, Nor-Edine Environmental acceptability of dredged sediments in road engineering: comparative waste and product approaches Dans: International symposium on sediment management, Lille, France, 2021, (ACTI). Liens @inproceedings{lecomte:hal-04336246,
title = {Environmental acceptability of dredged sediments in road engineering: comparative waste and product approaches},
author = {T. Lecomte and Yannick Mamindy-Pajany and Christine Lors and Nor-Edine Abriak},
url = {https://hal.science/hal-04336246},
year = {2021},
date = {2021-06-01},
urldate = {2021-06-01},
booktitle = {International symposium on sediment management},
address = {Lille, France},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2021Article de journal ER2 Auteurs : Zouch, Afef; Mamindy-Pajany, Yannick; Abriak, Nor-Edine; Ksibi, Mohamed Storage facilities reclamation using dredged sediments from waterways: Growing media formulation for plants according to the EU Ecolabel requirements Dans: Waste Management and Research, vol. 40, no. 6, p. 822-835, 2021, (ACL). Liens @article{zouch:hal-04326762,
title = {Storage facilities reclamation using dredged sediments from waterways: Growing media formulation for plants according to the EU Ecolabel requirements},
author = {Afef Zouch and Yannick Mamindy-Pajany and Nor-Edine Abriak and Mohamed Ksibi},
url = {https://hal.science/hal-04326762},
doi = {10.1177/0734242X211025201},
year = {2021},
date = {2021-06-01},
urldate = {2021-06-01},
journal = {Waste Management and Research},
volume = {40},
number = {6},
pages = {822-835},
publisher = {SAGE Publications},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Safhi, Amine El Mahdi; Rivard, Patrice; Yahia, Ammar; Khayat, Kamal Henri; Abriak, Nor-Edine Durability and transport properties of SCC incorporating dredged sediments Dans: Construction and Building Materials, vol. 288, p. 123116, 2021, (ACL). Liens @article{safhi:hal-03772404,
title = {Durability and transport properties of SCC incorporating dredged sediments},
author = {Amine El Mahdi Safhi and Patrice Rivard and Ammar Yahia and Kamal Henri Khayat and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03772404},
doi = {10.1016/j.conbuildmat.2021.123116},
year = {2021},
date = {2021-06-01},
urldate = {2021-06-01},
journal = {Construction and Building Materials},
volume = {288},
pages = {123116},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Makni, Hajer; Khlif, Mohamed; Becquart, Frédéric; Abriak, Nor-Edine; Bradai, Chedly Leaching test for assessing compliance with environmental requirements of fired clay bricks incorporated by deinking paper sludge Dans: Construction and Building Materials, vol. 289, p. 123155, 2021, (ACL). Liens @article{makni:hal-03772531,
title = {Leaching test for assessing compliance with environmental requirements of fired clay bricks incorporated by deinking paper sludge},
author = {Hajer Makni and Mohamed Khlif and Frédéric Becquart and Nor-Edine Abriak and Chedly Bradai},
url = {https://hal.archives-ouvertes.fr/hal-03772531},
doi = {10.1016/j.conbuildmat.2021.123155},
year = {2021},
date = {2021-06-01},
urldate = {2021-06-01},
journal = {Construction and Building Materials},
volume = {289},
pages = {123155},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Bouchikhi, Abdelhadi; Maherzi, Walid; Benzerzour, Mahfoud; Mamindy-Pajany, Yannick; Peys, Arne; Abriak, Nor-Edine Manufacturing of Low-Carbon Binders Using Waste Glass and Dredged Sediments: Formulation and Performance Assessment at Laboratory Scale Dans: Sustainability, vol. 13, no. 9, p. 4960, 2021, (ACL). Liens @article{bouchikhi:hal-03360288b,
title = {Manufacturing of Low-Carbon Binders Using Waste Glass and Dredged Sediments: Formulation and Performance Assessment at Laboratory Scale},
author = {Abdelhadi Bouchikhi and Walid Maherzi and Mahfoud Benzerzour and Yannick Mamindy-Pajany and Arne Peys and Nor-Edine Abriak},
url = {https://hal.science/hal-03360288},
doi = {10.3390/su13094960},
year = {2021},
date = {2021-05-01},
urldate = {2021-05-01},
journal = {Sustainability},
volume = {13},
number = {9},
pages = {4960},
publisher = {MDPI},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Berthomier, Mathilde; Lors, Christine; Damidot, Denis; Larrard, Thomas; Guérandel, Cyril; Bertron, Alexandra Leaching of CEM III paste by demineralised or mineralised water at pH~7 in relation with aluminium release in drinking water network Dans: Cement and Concrete Research, vol. 143, p. 106399, 2021, (ACL). Liens @article{berthomier:hal-03147900,
title = {Leaching of CEM III paste by demineralised or mineralised water at pH~7 in relation with aluminium release in drinking water network},
author = {Mathilde Berthomier and Christine Lors and Denis Damidot and Thomas Larrard and Cyril Guérandel and Alexandra Bertron},
url = {https://hal.insa-toulouse.fr/hal-03147900},
doi = {10.1016/j.cemconres.2021.106399},
year = {2021},
date = {2021-05-01},
urldate = {2021-05-01},
journal = {Cement and Concrete Research},
volume = {143},
pages = {106399},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Karam, Reine; Paris, Michael; Deneele, Dimitri; Wattez, Thomas; Cyr, Martin; Bulteel, David Effect of sediment incorporation on the reactivity of alkali-activated GGBFS systems Dans: Materials and Structures, vol. 54, no. 3, 2021. Liens @article{Karam2021,
title = {Effect of sediment incorporation on the reactivity of alkali-activated GGBFS systems},
author = {Reine Karam and Michael Paris and Dimitri Deneele and Thomas Wattez and Martin Cyr and David Bulteel},
doi = {10.1617/s11527-021-01720-y},
year = {2021},
date = {2021-05-01},
journal = {Materials and Structures},
volume = {54},
number = {3},
publisher = {Springer Science and Business Media LLC},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Betremieux, Mathilde; Mamindy-Pajany, Yannick Investigation of a biosurfactant-enhanced electrokinetic method and its effect on the potentially toxic trace elements in waterways sediments Dans: Environmental Technology, p. 1-36, 2021, (ACL). Liens @article{betremieux:hal-03251203,
title = {Investigation of a biosurfactant-enhanced electrokinetic method and its effect on the potentially toxic trace elements in waterways sediments},
author = {Mathilde Betremieux and Yannick Mamindy-Pajany},
url = {https://hal.archives-ouvertes.fr/hal-03251203},
doi = {10.1080/09593330.2021.1936202},
year = {2021},
date = {2021-05-01},
urldate = {2021-05-01},
journal = {Environmental Technology},
pages = {1-36},
publisher = {Taylor & Francis: STM, Behavioural Science and Public Health Titles},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Actes ER2 Auteurs : Lemay, Marie; Mamindy-Pajany, Yannick; Abriak, Nor-Edine; Zouch, Afef; Ksibi, Mohamed Storage Facilities Reclamation Using Dredged Sediments from Waterways: Growing Media Formulation for Plants According to E.U ECOLABEL Framework Springer International Publishing, 2021, (ACL). Liens @proceedings{lemay:hal-04329511,
title = {Storage Facilities Reclamation Using Dredged Sediments from Waterways: Growing Media Formulation for Plants According to E.U ECOLABEL Framework},
author = {Marie Lemay and Yannick Mamindy-Pajany and Nor-Edine Abriak and Afef Zouch and Mohamed Ksibi},
url = {https://hal.science/hal-04329511},
doi = {10.1007/978-3-030-51210-1_101},
year = {2021},
date = {2021-04-01},
urldate = {2021-04-01},
pages = {643-648},
publisher = {Springer International Publishing},
series = {Environmental Science and Engineering},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {proceedings}
}
|
2021Article de journal ER2 Auteurs : Ouedraogo, N. Philippe; Becquart, Frédéric; Benzerzour, Mahfoud; Abriak, Nor-Edine Evaluation of the Mechanical and Environmental Properties of Self-Compacting Mortars with Raw Harbour Dredging Sediments (SCMs) Dans: Journal of Environmental Science and Engineering, p. 349-355, 2021, (ACL). Liens @article{ouedraogo:hal-04168113,
title = {Evaluation of the Mechanical and Environmental Properties of Self-Compacting Mortars with Raw Harbour Dredging Sediments (SCMs)},
author = {N. Philippe Ouedraogo and Frédéric Becquart and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168113},
doi = {10.1007/978-3-030-51210-1_57},
year = {2021},
date = {2021-04-01},
urldate = {2021-04-01},
journal = {Journal of Environmental Science and Engineering},
pages = {349-355},
series = {Environmental Science and Engineering},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Zentar, Rachid; Wang, Hongwei; Wang, Dongxing Comparative study of stabilization/solidification of dredged sediments with ordinary Portland cement and calcium sulfo-aluminate cement in the framework of valorization in road construction material Dans: Construction and Building Materials, vol. 279, p. 122447, 2021. Liens @article{Zentar2021,
title = {Comparative study of stabilization/solidification of dredged sediments with ordinary Portland cement and calcium sulfo-aluminate cement in the framework of valorization in road construction material},
author = {Rachid Zentar and Hongwei Wang and Dongxing Wang},
doi = {10.1016/j.conbuildmat.2021.122447},
year = {2021},
date = {2021-04-01},
journal = {Construction and Building Materials},
volume = {279},
pages = {122447},
publisher = {Elsevier BV},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Bouarroudj, Mohamed ElKarim; Rémond, Sébastien; Grellier, Adèle; Bulteel, David; Michel, Frederic; Zhao, Zengfeng; Courard, Luc Intra granular porosity of mineral powders: modeling and experimentation Dans: Materials and Structures, vol. 54, no. 2, 2021, (ACL). Liens @article{Bouarroudj2021b,
title = {Intra granular porosity of mineral powders: modeling and experimentation},
author = {Mohamed ElKarim Bouarroudj and Sébastien Rémond and Adèle Grellier and David Bulteel and Frederic Michel and Zengfeng Zhao and Luc Courard},
doi = {10.1617/s11527-021-01670-5},
year = {2021},
date = {2021-03-01},
journal = {Materials and Structures},
volume = {54},
number = {2},
publisher = {Springer Science and Business Media LLC},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Amar, Mouhamadou; Benzerzour, Mahfoud; Kleib, Joelle; Abriak, Nor-Edine From dredged sediment to supplementary cementitious material: characterization, treatment, and reuse Dans: International Journal of Sediment Research, vol. 36, no. 1, p. 92-109, 2021, (ACL). Liens @article{amar:hal-03178700,
title = {From dredged sediment to supplementary cementitious material: characterization, treatment, and reuse},
author = {Mouhamadou Amar and Mahfoud Benzerzour and Joelle Kleib and Nor-Edine Abriak},
url = {https://hal.science/hal-03178700},
doi = {10.1016/j.ijsrc.2020.06.002},
year = {2021},
date = {2021-02-01},
urldate = {2021-02-01},
journal = {International Journal of Sediment Research},
volume = {36},
number = {1},
pages = {92-109},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Bouarroudj, Mohamed ElKarim; é, Sébastien R; Bulteel, David; Potier, Guillaume; Michel, Frederic; Zhao, Zengfeng; Courard, Luc Use of grinded hardened cement pastes as mineral addition for mortars Dans: Journal of Building Engineering, vol. 34, p. 101863, 2021, (ACL). Liens @article{Bouarroudj2021,
title = {Use of grinded hardened cement pastes as mineral addition for mortars},
author = {Mohamed ElKarim Bouarroudj and Sébastien R é and David Bulteel and Guillaume Potier and Frederic Michel and Zengfeng Zhao and Luc Courard},
doi = {10.1016/j.jobe.2020.101863},
year = {2021},
date = {2021-02-01},
journal = {Journal of Building Engineering},
volume = {34},
pages = {101863},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Colman, C; Bulteel, David; Thiery, Vincent; é, S R; Michel, F; Courard, L Internal sulfate attack in mortars containing contaminated fine recycled concrete aggregates Dans: Construction and Building Materials, vol. 272, p. 121851, 2021, (ACL). Liens @article{Colman2021,
title = {Internal sulfate attack in mortars containing contaminated fine recycled concrete aggregates},
author = {C Colman and David Bulteel and Vincent Thiery and S R é and F Michel and L Courard},
doi = {10.1016/j.conbuildmat.2020.121851},
year = {2021},
date = {2021-02-01},
journal = {Construction and Building Materials},
volume = {272},
pages = {121851},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Bouchikhi, Abdelhadi; Mamindy-Pajany, Yannick; Maherzi, Walid; Albert-Mercier, Cyrille; El-Moueden, Hamza; Benzerzour, Mahfoud; Peys, Arne; Abriak, Nor-Edine Use of residual waste glass in an alkali-activated binder - Structural characterization, environmental leaching behavior and comparison of reactivity Dans: Journal of Building Engineering, vol. 34, p. 101903, 2021, (ACL). Liens @article{bouchikhi:hal-03360292,
title = {Use of residual waste glass in an alkali-activated binder - Structural characterization, environmental leaching behavior and comparison of reactivity},
author = {Abdelhadi Bouchikhi and Yannick Mamindy-Pajany and Walid Maherzi and Cyrille Albert-Mercier and Hamza El-Moueden and Mahfoud Benzerzour and Arne Peys and Nor-Edine Abriak},
url = {https://hal.archives-ouvertes.fr/hal-03360292},
doi = {10.1016/j.jobe.2020.101903},
year = {2021},
date = {2021-02-01},
urldate = {2021-02-01},
journal = {Journal of Building Engineering},
volume = {34},
pages = {101903},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Bala, Mokrane; Zentar, Rachid; Boustingorry, Pascal Modèles prédictifs de l'affaissement du béton : Cas de granulats concassés et roulés Dans: Academic Journal of Civil Engineering, 2021, (ACL). Liens @article{bala:hal-04300766,
title = {Modèles prédictifs de l'affaissement du béton : Cas de granulats concassés et roulés},
author = {Mokrane Bala and Rachid Zentar and Pascal Boustingorry},
url = {https://hal.science/hal-04300766},
doi = {10.26168/ajce.37.1.42},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Academic Journal of Civil Engineering},
publisher = {Association Universitaire de Génie Civil},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Wang, Hongwei; Zentar, Rachid; Wang, Dongxing Rheological characterisation of kaolinite clay: experimental study Dans: Academic Journal of Civil Engineering, 2021, (ACL). Liens @article{wang:hal-04300778,
title = {Rheological characterisation of kaolinite clay: experimental study},
author = {Hongwei Wang and Rachid Zentar and Dongxing Wang},
url = {https://hal.science/hal-04300778},
doi = {10.26168/ajce.37.1.40},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Academic Journal of Civil Engineering},
publisher = {Association Universitaire de Génie Civil},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Wang, Hongwei; Zentar, Rachid Valorisation of marine sediments with novel eco-friendly OPC-CSA composite binder Dans: Academic Journal of Civil Engineering, 2021, (ACL). Liens @article{wang:hal-04300589,
title = {Valorisation of marine sediments with novel eco-friendly OPC-CSA composite binder},
author = {Hongwei Wang and Rachid Zentar},
url = {https://hal.science/hal-04300589},
doi = {10.26168/ajce.39.1.42},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Academic Journal of Civil Engineering},
publisher = {Association Universitaire de Génie Civil},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Quedou, Pritish Gupta; Wirquin, Eric; Bokhoree, Chandradeo Sustainable concrete: Potency of sugarcane bagasse ash as
a cementitious material in the construction industry Dans: Case Studies in Construction Materials, vol. 14, p. e00545, 2021, ISSN: 2214-5095, (ACL). Résumé | Liens @article{QUEDOU2021e00545,
title = {Sustainable concrete: Potency of sugarcane bagasse ash as
a cementitious material in the construction industry},
author = {Pritish Gupta Quedou and Eric Wirquin and Chandradeo Bokhoree},
url = {https://www.sciencedirect.com/science/article/pii/S2214509521000607},
doi = {https://doi.org/10.1016/j.cscm.2021.e00545},
issn = {2214-5095},
year = {2021},
date = {2021-01-01},
journal = {Case Studies in Construction Materials},
volume = {14},
pages = {e00545},
abstract = {The aim of this research is to determine the mechanical and durability properties of sugarcane bagasse ash (SCBA) as a partial replacement to Ordinary Portland Cement (OPC) in concrete. The SCBA was partially replaced at the percentage of 5 %, 10 %, 15 % and 20 % by weight of
cement for a mean target strength of 27 MPa. A slump range of 130–150 mm was maintained constant throughout the experiment procedures. A total of 120 cubes and 30 rectangular beams were tested and the results were compared with control concrete. To evaluate the behaviour of SCBA on concrete, different tests were conducted on the concrete specimens namely, compressive strength, flexural strength, water absorption, water penetration, carbonation and ultrasonic pulse velocity. The results demonstrated that at 120 days of curing, compressive strength increased by 2.6 % and 1.7 % for 5 % and 10 % replacement level. The water absorption increased
by 255 %, 390 %, 438 % and 488 % for 5 %, 10 %, 15 % and 20 % replacement
level. The other tests showed decreased flexural strength and ultrasonic pulse velocity and increased water penetration and carbonation depth. The
study inferred that 10 % replacement of OPC by SCBA exhibited positive performances and can be considered a suitable cementitious material in the construction industry.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The aim of this research is to determine the mechanical and durability properties of sugarcane bagasse ash (SCBA) as a partial replacement to Ordinary Portland Cement (OPC) in concrete. The SCBA was partially replaced at the percentage of 5 %, 10 %, 15 % and 20 % by weight of
cement for a mean target strength of 27 MPa. A slump range of 130–150 mm was maintained constant throughout the experiment procedures. A total of 120 cubes and 30 rectangular beams were tested and the results were compared with control concrete. To evaluate the behaviour of SCBA on concrete, different tests were conducted on the concrete specimens namely, compressive strength, flexural strength, water absorption, water penetration, carbonation and ultrasonic pulse velocity. The results demonstrated that at 120 days of curing, compressive strength increased by 2.6 % and 1.7 % for 5 % and 10 % replacement level. The water absorption increased
by 255 %, 390 %, 438 % and 488 % for 5 %, 10 %, 15 % and 20 % replacement
level. The other tests showed decreased flexural strength and ultrasonic pulse velocity and increased water penetration and carbonation depth. The
study inferred that 10 % replacement of OPC by SCBA exhibited positive performances and can be considered a suitable cementitious material in the construction industry. |
2021Article de journal ER2 Auteurs : Qachach, Hajar; Abriak, Nor-Edine; Mahrad, Badr El; Souabi, Salah; Tahiri, Mohamed Biological treatment of fuel wastewater generated from a thermal power plant by continuous and discontinuous aeration Dans: Desalination and Water Treatment, vol. 222, p. 145-155, 2021, (ACL). Liens @article{qachach:hal-03772923,
title = {Biological treatment of fuel wastewater generated from a thermal power plant by continuous and discontinuous aeration},
author = {Hajar Qachach and Nor-Edine Abriak and Badr El Mahrad and Salah Souabi and Mohamed Tahiri},
url = {https://hal.archives-ouvertes.fr/hal-03772923},
doi = {10.5004/dwt.2021.27120},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Desalination and Water Treatment},
volume = {222},
pages = {145-155},
publisher = {FHF},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Baz, Bilal; Rémond, Sébastien; Aouad, Georges Influence of the mix composition on the thixotropy of 3D printable mortars Dans: Magazine of Concrete Research, p. 1-13, 2021, (ACL). Liens @article{baz:hal-03188880,
title = {Influence of the mix composition on the thixotropy of 3D printable mortars},
author = {Bilal Baz and Sébastien Rémond and Georges Aouad},
url = {https://hal.archives-ouvertes.fr/hal-03188880},
doi = {10.1680/jmacr.20.00193},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Magazine of Concrete Research},
pages = {1-13},
publisher = {Thomas Telford},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Quedou, Pritish Gupta; Wirquin, Eric; Bokhoree, Chandradeo A sustainable approach in using construction and demolition waste materials in concrete Dans: World Journal of Engineering, vol. 18, no. 6, p. 826-840, 2021, ISSN: 17085284, (ACL). Liens @article{Quedou2021826,
title = {A sustainable approach in using construction and demolition waste materials in concrete},
author = {Pritish Gupta Quedou and Eric Wirquin and Chandradeo Bokhoree},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85106336977&doi=10.1108%2fWJE-05-2020-0161&partnerID=40&md5=e62082e114832628fbd477e10dac64a6},
doi = {10.1108/WJE-05-2020-0161},
issn = {17085284},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {World Journal of Engineering},
volume = {18},
number = {6},
pages = {826-840},
publisher = {Emerald Group Holdings Ltd.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Chafei, Sawsen; Gomina, Moussa Improvement of the Behavior of Cement Mortar by Vinegar Treatment of the Flax Fibers Reinforcement Dans: International Journal of Advanced Materials Research, vol. 7, no. 1, p. 1-7, 2021, (ACL). Liens @article{chafei:hal-03546800,
title = {Improvement of the Behavior of Cement Mortar by Vinegar Treatment of the Flax Fibers Reinforcement},
author = {Sawsen Chafei and Moussa Gomina},
url = {https://hal.archives-ouvertes.fr/hal-03546800},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {International Journal of Advanced Materials Research},
volume = {7},
number = {1},
pages = {1-7},
publisher = {American Institute of Science},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Ennahal, Ilyas; Maherzi, Walid; Benzerzour, Mahfoud; Mamindy-Pajany, Yannick; Abriak, Nor-Edine Performance of Lightweight Aggregates Comprised of Sediments and Thermoplastic Waste Dans: Waste and Biomass Valorization, vol. 12, no. 1, p. 515-530, 2021, (ACL). Liens @article{ennahal:hal-04168120,
title = {Performance of Lightweight Aggregates Comprised of Sediments and Thermoplastic Waste},
author = {Ilyas Ennahal and Walid Maherzi and Mahfoud Benzerzour and Yannick Mamindy-Pajany and Nor-Edine Abriak},
url = {https://imt-nord-europe.hal.science/hal-04168120},
doi = {10.1007/s12649-020-00970-1},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Waste and Biomass Valorization},
volume = {12},
number = {1},
pages = {515-530},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER2 Auteurs : Thiéry, Vincent Metamorphism of sedimentary rocks recognised by 19th century French naturalists: A case study from the Chavanon sequence marbles, Massif Central, France Dans: Proceedings of the Geologists' Association, vol. 132, no. 4, p. 491-496, 2021, ISSN: 0016-7878, (ACL). Résumé | Liens @article{THIERY2021491,
title = {Metamorphism of sedimentary rocks recognised by 19th century French naturalists: A case study from the Chavanon sequence marbles, Massif Central, France},
author = {Vincent Thiéry},
url = {https://www.sciencedirect.com/science/article/pii/S0016787821000432},
doi = {https://doi.org/10.1016/j.pgeola.2021.05.003},
issn = {0016-7878},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Proceedings of the Geologists' Association},
volume = {132},
number = {4},
pages = {491-496},
abstract = {The Chavanon metamorphic sequence in the Variscan French Massif Central contains marble lenses that have been exploited since at least the 18th century to produce lime. They provided an opportunity to some major pioneers among nineteenth century French geologists to understand how metamorphic rocks are formed. The intimate association between marbles and gneisses led them to propose that the initial pile of rocks was deposited as a single unit under water. They thoroughly described the attitude, folding and mineralogy of the marbles, making their works of great historical value. Originally written in French, their translation into English and the reproduction of original figures from the works they published will be very useful to the international community of geologists interested in the history of their science.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The Chavanon metamorphic sequence in the Variscan French Massif Central contains marble lenses that have been exploited since at least the 18th century to produce lime. They provided an opportunity to some major pioneers among nineteenth century French geologists to understand how metamorphic rocks are formed. The intimate association between marbles and gneisses led them to propose that the initial pile of rocks was deposited as a single unit under water. They thoroughly described the attitude, folding and mineralogy of the marbles, making their works of great historical value. Originally written in French, their translation into English and the reproduction of original figures from the works they published will be very useful to the international community of geologists interested in the history of their science. |
2020Article de journal ER2 Auteurs : Colman, Charlotte; Bulteel, David; Rémond, Sébastien; Zhao, Zengfeng; Courard, Luc Valorization of Fine Recycled Aggregates Contaminated with Gypsum Residues: Characterization and Evaluation of the Risk for Secondary Ettringite Formation Dans: Materials, vol. 13, no. 21, p. 4866, 2020, (ACL). Liens @article{Colman2020,
title = {Valorization of Fine Recycled Aggregates Contaminated with Gypsum Residues: Characterization and Evaluation of the Risk for Secondary Ettringite Formation},
author = {Charlotte Colman and David Bulteel and Sébastien Rémond and Zengfeng Zhao and Luc Courard},
doi = {10.3390/ma13214866},
year = {2020},
date = {2020-10-01},
journal = {Materials},
volume = {13},
number = {21},
pages = {4866},
publisher = {MDPI AG},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Fergani, Souhila; Mokhtar, Khedidja Allag Ait; Djerbal, Lynda; Pizette, Patrick; Abriak, Nor-Edine; Nechnech, Ammar FEM Simulations of Granular Matter Behaviour Under Triaxial Tests Dans: Geotechnical and Geological Engineering, vol. 39, no. 2, p. 991-1008, 2020, (ACL). Liens @article{fergani:hal-04329420,
title = {FEM Simulations of Granular Matter Behaviour Under Triaxial Tests},
author = {Souhila Fergani and Khedidja Allag Ait Mokhtar and Lynda Djerbal and Patrick Pizette and Nor-Edine Abriak and Ammar Nechnech},
url = {https://hal.science/hal-04329420},
doi = {10.1007/s10706-020-01540-x},
year = {2020},
date = {2020-09-01},
urldate = {2020-09-01},
journal = {Geotechnical and Geological Engineering},
volume = {39},
number = {2},
pages = {991-1008},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Cabrerizo, Adrien; Bulteel, David; Waligora, Julien; Landrot, Gautier; Fonda, Emiliano; Olard, François Chemical, mineralogical, and environmental characterization of tunnel boring muds for their valorization in road construction: a focus on molybdenum characterization Dans: Environmental Science and Pollution Research, vol. 27, no. 35, p. 44314–44324, 2020, (ACL). Liens @article{Cabrerizo2020,
title = {Chemical, mineralogical, and environmental characterization of tunnel boring muds for their valorization in road construction: a focus on molybdenum characterization},
author = {Adrien Cabrerizo and David Bulteel and Julien Waligora and Gautier Landrot and Emiliano Fonda and François Olard},
doi = {10.1007/s11356-020-09969-6},
year = {2020},
date = {2020-08-01},
journal = {Environmental Science and Pollution Research},
volume = {27},
number = {35},
pages = {44314--44324},
publisher = {Springer Science and Business Media LLC},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Franke, Christine; Patault, Edouard; Alary, Claire; Abriak, Nor-Edine; Lagroix, France Magnetic fingerprinting of fluvial suspended particles in the context of soil erosion: example of the Canche River watershed (Northern France) Dans: Geochemistry, Geophysics, Geosystems, vol. 21, no. 5, p. e2019GC008836, 2020, (ACL). Liens @article{franke:hal-02538638,
title = {Magnetic fingerprinting of fluvial suspended particles in the context of soil erosion: example of the Canche River watershed (Northern France)},
author = {Christine Franke and Edouard Patault and Claire Alary and Nor-Edine Abriak and France Lagroix},
url = {https://hal.science/hal-02538638},
doi = {10.1029/2019GC008836},
year = {2020},
date = {2020-05-01},
urldate = {2020-05-01},
journal = {Geochemistry, Geophysics, Geosystems},
volume = {21},
number = {5},
pages = {e2019GC008836},
publisher = {AGU and the Geochemical Society},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Bala, Mokrane; Zentar, Rachid; Boustingorry, Pascal Parameter determination of the Compressible Packing Model (CPM) for concrete application Dans: Powder Technology, vol. 367, p. 56-66, 2020, (ACL). Liens @article{bala:hal-04095796,
title = {Parameter determination of the Compressible Packing Model (CPM) for concrete application},
author = {Mokrane Bala and Rachid Zentar and Pascal Boustingorry},
url = {https://hal.science/hal-04095796},
doi = {10.1016/j.powtec.2019.11.085},
year = {2020},
date = {2020-05-01},
urldate = {2020-05-01},
journal = {Powder Technology},
volume = {367},
pages = {56-66},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Hansen, Anne; Abriak, Nor-Edine; de la Torre, Ma. Catalina Alfaro Evaluation and management of sediments and porous media Dans: Environmental Science and Pollution Research, vol. 27, no. 14, p. 15931-15934, 2020, (ACL). Liens @article{hansen:hal-04329765,
title = {Evaluation and management of sediments and porous media},
author = {Anne Hansen and Nor-Edine Abriak and Ma. Catalina Alfaro de la Torre},
url = {https://hal.science/hal-04329765},
doi = {10.1007/s11356-020-08503-y},
year = {2020},
date = {2020-04-01},
urldate = {2020-04-01},
journal = {Environmental Science and Pollution Research},
volume = {27},
number = {14},
pages = {15931-15934},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Joubert, Johannes Christoffel; Wilke, Daniel N; Govender, Nicolin; Pizette, Patrick; Tuzun, Ugur; Abriak, Nor-Edine 3D gradient corrected SPH for fully resolved particle–fluid interactions Dans: Applied Mathematical Modelling, vol. 78, p. 816–840, 2020. Liens @article{Joubert2020,
title = {3D gradient corrected SPH for fully resolved particle–fluid interactions},
author = {Johannes Christoffel Joubert and Daniel N Wilke and Nicolin Govender and Patrick Pizette and Ugur Tuzun and Nor-Edine Abriak},
doi = {10.1016/j.apm.2019.09.030},
year = {2020},
date = {2020-02-01},
journal = {Applied Mathematical Modelling},
volume = {78},
pages = {816--840},
publisher = {Elsevier BV},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Wang, Hongwei; Zentar, Rachid; Wang, Dongxing Apparent and complex viscosity versus the water content of clay Dans: Academic Journal of Civil Engineering, 2020, (ACL). Liens @article{wang:hal-04300684,
title = {Apparent and complex viscosity versus the water content of clay},
author = {Hongwei Wang and Rachid Zentar and Dongxing Wang},
url = {https://hal.science/hal-04300684},
doi = {10.26168/ajce.38.1.50},
year = {2020},
date = {2020-01-01},
urldate = {2020-01-01},
journal = {Academic Journal of Civil Engineering},
publisher = {Association Universitaire de Génie Civil},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Bala, Mokrane; Zentar, Rachid; Boustingorry, Pascal Parameter determination of the Compressible Packing Model (CPM) for concrete application Dans: Powder Technology, vol. 367, p. 56-66, 2020, (ACL). Liens @article{bala:hal-03224977,
title = {Parameter determination of the Compressible Packing Model (CPM) for concrete application},
author = {Mokrane Bala and Rachid Zentar and Pascal Boustingorry},
url = {https://hal.science/hal-03224977},
doi = {10.1016/j.powtec.2019.11.085},
year = {2020},
date = {2020-01-01},
urldate = {2020-01-01},
journal = {Powder Technology},
volume = {367},
pages = {56-66},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Wang, Hongwei; Zentar, Rachid; Wang, Dongxing Organic dredged sediments treated with Portland Cement: compaction characteristics Dans: Academic Journal of Civil Engineering, 2020, (ACL). Liens @article{wang:hal-04300662,
title = {Organic dredged sediments treated with Portland Cement: compaction characteristics},
author = {Hongwei Wang and Rachid Zentar and Dongxing Wang},
url = {https://hal.science/hal-04300662},
doi = {10.26168/ajce.38.1.49},
year = {2020},
date = {2020-01-01},
urldate = {2020-01-01},
journal = {Academic Journal of Civil Engineering},
publisher = {Association Universitaire de Génie Civil},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Hamouche, Fawzi; Zentar, Rachid Effects of Organic Matter on Physical Properties of Dredged Marine Sediments Dans: Waste and Biomass Valorization, vol. 11, no. 1, p. 389-401, 2020, (ACL). Liens @article{hamouche:hal-03225025,
title = {Effects of Organic Matter on Physical Properties of Dredged Marine Sediments},
author = {Fawzi Hamouche and Rachid Zentar},
url = {https://hal.science/hal-03225025},
doi = {10.1007/s12649-018-0387-6},
year = {2020},
date = {2020-01-01},
urldate = {2020-01-01},
journal = {Waste and Biomass Valorization},
volume = {11},
number = {1},
pages = {389-401},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Safhi, Amine El Mahdi; Rivard, P; Yahia, A; Benzerzour, Mahfoud; Khayat, K H Valorization of dredged sediments in self-consolidating concrete: Fresh, hardened, and microstructural properties Dans: Journal of Cleaner Production, vol. 263, 2020, (ACL). Liens @article{Safhi2020,
title = {Valorization of dredged sediments in self-consolidating concrete: Fresh, hardened, and microstructural properties},
author = {Amine El Mahdi Safhi and P Rivard and A Yahia and Mahfoud Benzerzour and K H Khayat},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85083002357&doi=10.1016%2fj.jclepro.2020.121472&partnerID=40&md5=11d9b39745af3d2ea92e80ac28286d20},
doi = {10.1016/j.jclepro.2020.121472},
year = {2020},
date = {2020-01-01},
journal = {Journal of Cleaner Production},
volume = {263},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Wang, D; Gao, X; Wang, R; Larsson, S; Benzerzour, Mahfoud Elevated curing temperature-associated strength and mechanisms of reactive MgO-activated industrial by-products solidified soils Dans: Marine Georesources and Geotechnology, vol. 38, no. 6, p. 659-671, 2020, (ACL). Liens @article{Wang2020659,
title = {Elevated curing temperature-associated strength and mechanisms of reactive MgO-activated industrial by-products solidified soils},
author = {D Wang and X Gao and R Wang and S Larsson and Mahfoud Benzerzour},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85065714376&doi=10.1080%2f1064119X.2019.1610817&partnerID=40&md5=0bb2f8f65dbdeb68bf593089fee80032},
doi = {10.1080/1064119X.2019.1610817},
year = {2020},
date = {2020-01-01},
journal = {Marine Georesources and Geotechnology},
volume = {38},
number = {6},
pages = {659-671},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Wang, D; Benzerzour, Mahfoud; Hu, X; Huang, B; Chen, Z; Xu, X Strength, Permeability, and Micromechanisms of Industrial Residue Magnesium Oxychloride Cement Solidified Slurry Dans: International Journal of Geomechanics, vol. 20, no. 7, 2020, (ACL). Liens @article{Wang2020c,
title = {Strength, Permeability, and Micromechanisms of Industrial Residue Magnesium Oxychloride Cement Solidified Slurry},
author = {D Wang and Mahfoud Benzerzour and X Hu and B Huang and Z Chen and X Xu},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85077807357&doi=10.1061%2f%28ASCE%29GM.1943-5622.0001690&partnerID=40&md5=586d43e8c69d4d36659dde5466fb46a6},
doi = {10.1061/(ASCE)GM.1943-5622.0001690},
year = {2020},
date = {2020-01-01},
journal = {International Journal of Geomechanics},
volume = {20},
number = {7},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Ahmed, Zeraoui; Benzerzour, Mahfoud; Maherzi, Walid; Mansi, R; Abriak, Nor-Edine New software for the optimization of the formulation and the treatment of dredged sediments for utilization in civil engineering Dans: Journal of Soils and Sediments, vol. 20, no. 6, p. 2709-2716, 2020, (ACL). Liens @article{Zeraoui20202709,
title = {New software for the optimization of the formulation and the treatment of dredged sediments for utilization in civil engineering},
author = {Zeraoui Ahmed and Mahfoud Benzerzour and Walid Maherzi and R Mansi and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85083790600&doi=10.1007%2fs11368-020-02605-3&partnerID=40&md5=4e67a52f71ba9e0b6c06a2af2d56b81b},
doi = {10.1007/s11368-020-02605-3},
year = {2020},
date = {2020-01-01},
journal = {Journal of Soils and Sediments},
volume = {20},
number = {6},
pages = {2709-2716},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Maherzi, Walid; Ennahal, I; Benzerzour, Mahfoud; Mamindy-Pajany, Yannick; Abriak, Nor-Edine Study of the polymer mortar based on dredged sediments and epoxy resin: Effect of the sediments on the behavior of the polymer mortar Dans: Powder Technology, vol. 361, p. 968-982, 2020, (ACL). Liens @article{Maherzi2020968,
title = {Study of the polymer mortar based on dredged sediments and epoxy resin: Effect of the sediments on the behavior of the polymer mortar},
author = {Walid Maherzi and I Ennahal and Mahfoud Benzerzour and Yannick Mamindy-Pajany and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85076518214&doi=10.1016%2fj.powtec.2019.10.104&partnerID=40&md5=b2f518074031dec94190f6022e652dd6},
doi = {10.1016/j.powtec.2019.10.104},
year = {2020},
date = {2020-01-01},
journal = {Powder Technology},
volume = {361},
pages = {968-982},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Ennahal, I; Maherzi, Walid; Benzerzour, Mahfoud; Mamindy-Pajany, Yannick; Abriak, Nor-Edine Performance of Lightweight Aggregates Comprised of Sediments and Thermoplastic Waste Dans: Waste and Biomass Valorization, 2020, (ACL). Liens @article{Ennahal2020,
title = {Performance of Lightweight Aggregates Comprised of Sediments and Thermoplastic Waste},
author = {I Ennahal and Walid Maherzi and Mahfoud Benzerzour and Yannick Mamindy-Pajany and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85079446674&doi=10.1007%2fs12649-020-00970-1&partnerID=40&md5=8bdddd99494ed9d5e7813562666e258e},
doi = {10.1007/s12649-020-00970-1},
year = {2020},
date = {2020-01-01},
journal = {Waste and Biomass Valorization},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER2 Auteurs : Ly, Océane; Monchau, Francine; Rémond, Sébastien; Lors, Christine; Jouanneaux, Alain; Debarre, Étienne; Damidot, Denis Optimization of the formulation of an original hydrogel-based bone cement using a mixture design Dans: Journal of the Mechanical Behavior of Biomedical Materials, vol. 110, p. 103886, 2020, ISSN: 1751-6161, (ACL). Résumé | Liens @article{LY2020103886,
title = {Optimization of the formulation of an original hydrogel-based bone cement using a mixture design},
author = {Océane Ly and Francine Monchau and Sébastien Rémond and Christine Lors and Alain Jouanneaux and Étienne Debarre and Denis Damidot},
url = {https://www.sciencedirect.com/science/article/pii/S1751616120304409},
doi = {https://doi.org/10.1016/j.jmbbm.2020.103886},
issn = {1751-6161},
year = {2020},
date = {2020-01-01},
journal = {Journal of the Mechanical Behavior of Biomedical Materials},
volume = {110},
pages = {103886},
abstract = {Highly swelling polymers, i.e. superabsorbent hydrogels, are hydrophilic, three dimensional networks that can easily absorb a significant amount water, fluid or drug. They are widely used in various applications such as foods, cosmetics, and medical devices. Bone cements are used in orthopaedics as a filling biomaterial or as a grout enhancing the embedding of a prosthesis into bone and fixation is achieved by mechanical interlock with metal or bone surfaces. Recently, hydrophilic bone cements have attracted the attention for bone tissue-engineering applications. Here a bone cement containing an acrylic hydrogel (HEMA) as a liquid phase and a blend of corn starch, cellulose acetate and bioceramic filler as a solid phase is investigated by means of a mixture design which is a special topic within statistical Design of Experiments (DoE). Output variables of interest, complex shear modulus, compressive modulus and swelling rate related to rheological, mechanical and swelling properties respectively, are measured for each cement formulation. Applying the mixture design strategy enables to assess the impact of the three powder components on each variable of interest and to determine the optimal formulation in order to achieve the required properties of this HEMA-based bone cement, especially the rheology adapted to the desired clinical application, but also appropriate mechanical and swelling properties.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Highly swelling polymers, i.e. superabsorbent hydrogels, are hydrophilic, three dimensional networks that can easily absorb a significant amount water, fluid or drug. They are widely used in various applications such as foods, cosmetics, and medical devices. Bone cements are used in orthopaedics as a filling biomaterial or as a grout enhancing the embedding of a prosthesis into bone and fixation is achieved by mechanical interlock with metal or bone surfaces. Recently, hydrophilic bone cements have attracted the attention for bone tissue-engineering applications. Here a bone cement containing an acrylic hydrogel (HEMA) as a liquid phase and a blend of corn starch, cellulose acetate and bioceramic filler as a solid phase is investigated by means of a mixture design which is a special topic within statistical Design of Experiments (DoE). Output variables of interest, complex shear modulus, compressive modulus and swelling rate related to rheological, mechanical and swelling properties respectively, are measured for each cement formulation. Applying the mixture design strategy enables to assess the impact of the three powder components on each variable of interest and to determine the optimal formulation in order to achieve the required properties of this HEMA-based bone cement, especially the rheology adapted to the desired clinical application, but also appropriate mechanical and swelling properties. |
2020Article de journal ER2 Auteurs : Amar, Mouhamadou; Benzerzour, Mahfoud; Kleib, Joelle; Abriak, Nor-Edine From dredged sediment to supplementary cementitious material: Characterization, treatment, and reuse Dans: International Journal of Sediment Research, 2020, ISSN: 1001-6279. Résumé | Liens @article{AMAR2020,
title = {From dredged sediment to supplementary cementitious material: Characterization, treatment, and reuse},
author = {Mouhamadou Amar and Mahfoud Benzerzour and Joelle Kleib and Nor-Edine Abriak},
url = {http://www.sciencedirect.com/science/article/pii/S1001627920300664},
doi = {https://doi.org/10.1016/j.ijsrc.2020.06.002},
issn = {1001-6279},
year = {2020},
date = {2020-01-01},
journal = {International Journal of Sediment Research},
abstract = {Nowadays, the preservation of natural resources, the reuse, and the recycling of waste and by-products in the cement industry are gaining increasing attention in a sustainable development project. In this perspective, many studies focus on finding solutions in order to propose environmentally friendly materials. Nowadays the sediments represent a way to preserve the natural resources by their reuse as a secondary raw material in multiple applications (concrete, roads, landscaped mound, etc …). However, they commonly contain contaminants, organic matter (5%–30%), high water content (50%–200%), and relatively small particle size (Dmax ≤ 300 μm). Therefore to improve the mechanical properties of this material as well as its physiochemical ones, specific methods of characterization and appropriate treatment techniques (calcination, chemical treatment, etc …) are required. This article presents a bibliographical review of the efficient use of sediments in cementitious matrix. It details experimental tests that must be performed to ensure the durability of sediment-based structure and assess their environmental impact under prescribed conditions.},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Nowadays, the preservation of natural resources, the reuse, and the recycling of waste and by-products in the cement industry are gaining increasing attention in a sustainable development project. In this perspective, many studies focus on finding solutions in order to propose environmentally friendly materials. Nowadays the sediments represent a way to preserve the natural resources by their reuse as a secondary raw material in multiple applications (concrete, roads, landscaped mound, etc …). However, they commonly contain contaminants, organic matter (5%–30%), high water content (50%–200%), and relatively small particle size (Dmax ≤ 300 μm). Therefore to improve the mechanical properties of this material as well as its physiochemical ones, specific methods of characterization and appropriate treatment techniques (calcination, chemical treatment, etc …) are required. This article presents a bibliographical review of the efficient use of sediments in cementitious matrix. It details experimental tests that must be performed to ensure the durability of sediment-based structure and assess their environmental impact under prescribed conditions. |
2020Article de journal ER2 Auteurs : Duchatel-Crépy, Lucie; Joly, Nicolas; Martin, Patrick; Marin, Adeline; Tahon, Jean-Francois; Lefebvre, Jean-Marc; Gaucher, Valérie Substitution degree and fatty chain length influence on structure and properties of fatty acid cellulose esters Dans: Carbohydrate Polymers, vol. 234, p. 115912, 2020, ISSN: 0144-8617, (ACL). Résumé | Liens @article{DUCHATELCREPY2020115912,
title = {Substitution degree and fatty chain length influence on structure and properties of fatty acid cellulose esters},
author = {Lucie Duchatel-Crépy and Nicolas Joly and Patrick Martin and Adeline Marin and Jean-Francois Tahon and Jean-Marc Lefebvre and Valérie Gaucher},
url = {http://www.sciencedirect.com/science/article/pii/S0144861720300862},
doi = {https://doi.org/10.1016/j.carbpol.2020.115912},
issn = {0144-8617},
year = {2020},
date = {2020-01-01},
journal = {Carbohydrate Polymers},
volume = {234},
pages = {115912},
abstract = {A series of fatty acid cellulose esters (FACEs) with both various degrees of substitution (from DS = 1.7 to 3) and side chain length were obtained by grafting aliphatic acid chlorides (from C10 to C16) onto cellulose backbone, in a homogeneous LiCl/DMAc medium. These materials were characterized by Fourier Transformed InfraRed (FTIR) and Nuclear Magnetic Resonance of Proton (1H NMR) spectroscopies, as well as Wide Angle X-ray Scattering (WAXS), Differential Scanning Calorimetry (DSC), mechanical analyses and chemical resistance to concentrated acid and alkali solutions. Whatever the alkyl chains length and the DS, all samples displayed a layered structure composed of a planar arrangement of parallel cellulosic backbones with fully extended flexible side chains oriented perpendicular to the planar structure without interdigitation. The alkyl chains were able to crystallize as soon as they are long enough. As the DS decreased, the plasticizing effect of the alkyl chains was less pronounced and their ability to crystallize was improved. Regarding the mechanical behavior and the chemical resistance, similar results were observed whatever the DS is.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
A series of fatty acid cellulose esters (FACEs) with both various degrees of substitution (from DS = 1.7 to 3) and side chain length were obtained by grafting aliphatic acid chlorides (from C10 to C16) onto cellulose backbone, in a homogeneous LiCl/DMAc medium. These materials were characterized by Fourier Transformed InfraRed (FTIR) and Nuclear Magnetic Resonance of Proton (1H NMR) spectroscopies, as well as Wide Angle X-ray Scattering (WAXS), Differential Scanning Calorimetry (DSC), mechanical analyses and chemical resistance to concentrated acid and alkali solutions. Whatever the alkyl chains length and the DS, all samples displayed a layered structure composed of a planar arrangement of parallel cellulosic backbones with fully extended flexible side chains oriented perpendicular to the planar structure without interdigitation. The alkyl chains were able to crystallize as soon as they are long enough. As the DS decreased, the plasticizing effect of the alkyl chains was less pronounced and their ability to crystallize was improved. Regarding the mechanical behavior and the chemical resistance, similar results were observed whatever the DS is. |
2020Article de journal ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Cothenet, Alexis; Remond, Sébastien Homogenization process of field samples of recycled aggregates Dans: Construction and Building Materials, vol. 243, p. 117991, 2020, ISSN: 0950-0618, (ACL). Résumé | Liens @article{KHOURY2020117991,
title = {Homogenization process of field samples of recycled aggregates},
author = {Eliane Khoury and Bogdan Cazacliu and Alexis Cothenet and Sébastien Remond},
url = {http://www.sciencedirect.com/science/article/pii/S0950061819334440},
doi = {https://doi.org/10.1016/j.conbuildmat.2019.117991},
issn = {0950-0618},
year = {2020},
date = {2020-01-01},
journal = {Construction and Building Materials},
volume = {243},
pages = {117991},
abstract = {The production of recycled aggregates requires thorough quality control. Sampling procedures already exist to ensure the representativeness of natural aggregates. However, given the heterogeneity of recycled aggregates, new sampling procedures have to be developed. The first step is the homogenization of the field sample which must then be reduced to lab size elementary samples. A typical homogenization process using a front-end loader was analyzed here. The tests were conducted on a field sample of 1 m3 of RA, reconstituted from crushed concrete, brick and asphalt. The field sample was mixed and the uniformity was characterized at two levels of mixing. The obtained uniformity was then compared, firstly, with the uniformity of the same field sample after homogenization using a large mixer and, secondly, with the result of the homogenization on a large sample in the laboratory. The local uniformity was obtained fast but the mixing should be prolonged to decrease the heterogeneity between different zones of the mixture. 6 loading/unloading mixing cycles with the loader appeared to be enough, even if it seemed in principle possible to increase the mixture uniformity nearly twice. In fact, one main drawback of the method was the evolution of the size and water absorption with the homogenization process. So, instead of continuing further the loader mixing with additional degradation of the mixture, it is suggested to increase the number of elementary samples to be analyzed in the laboratory.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The production of recycled aggregates requires thorough quality control. Sampling procedures already exist to ensure the representativeness of natural aggregates. However, given the heterogeneity of recycled aggregates, new sampling procedures have to be developed. The first step is the homogenization of the field sample which must then be reduced to lab size elementary samples. A typical homogenization process using a front-end loader was analyzed here. The tests were conducted on a field sample of 1 m3 of RA, reconstituted from crushed concrete, brick and asphalt. The field sample was mixed and the uniformity was characterized at two levels of mixing. The obtained uniformity was then compared, firstly, with the uniformity of the same field sample after homogenization using a large mixer and, secondly, with the result of the homogenization on a large sample in the laboratory. The local uniformity was obtained fast but the mixing should be prolonged to decrease the heterogeneity between different zones of the mixture. 6 loading/unloading mixing cycles with the loader appeared to be enough, even if it seemed in principle possible to increase the mixture uniformity nearly twice. In fact, one main drawback of the method was the evolution of the size and water absorption with the homogenization process. So, instead of continuing further the loader mixing with additional degradation of the mixture, it is suggested to increase the number of elementary samples to be analyzed in the laboratory. |
2020Article de journal ER2 Auteurs : Farzadnia, N; Pan, J; Khayat, K; Wirquin, Eric Effect of temperature on early‐age properties of self‐consolidating concrete equivalent mortar Dans: RILEM Technical Letters, vol. 5, p. 114-122, 2020, (ACL). Résumé | Liens @article{Farzadnia2020114,
title = {Effect of temperature on early‐age properties of self‐consolidating concrete equivalent mortar},
author = {N Farzadnia and J Pan and K Khayat and Eric Wirquin},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85099124737&doi=10.21809%2frilemtechlett.2020.105&partnerID=40&md5=39d8a7e6539be7de9d8a02128045fdca},
doi = {10.21809/rilemtechlett.2020.105},
year = {2020},
date = {2020-01-01},
journal = {RILEM Technical Letters},
volume = {5},
pages = {114-122},
abstract = {In this study, the effect of material temperature during casting on fresh properties, hydration kinetics, and early-age compressive strength of self-consolidating concrete (SCC) was evaluated. Concrete equivalent mortars (CEMs) based on SCC mixture designs with water-to-binder ratios of 0.41 and 0.45 were investigated. The SCC mixtures are targeted for infrastructure and building construction and precast applications. The CEMs were prepared at temperatures ranging from 8 to 36°C. Superplasticizer (SP) and air-entraining agent (AEA) demand were evaluated for the CEM mixtures made with different supplementary cementing material (SCM) and limestone filler types. Test results showed that the ambient temperature can significantly affect the SP and AEA demand, hydration kinetics, and compressive strength after 1 d of age. According to the ultraviolet–visible spectrophotometry (UV/Vis) test, the absorption rate of polycarboxylate-based SP decreased with temperature. In contrast, the sensitivity of polynaphthalene sulfonate-based SP to temperature was minimal. Relationships between the variations of different admixture contents, heat flux, and compressive strength with temperature were developed. For a constant slump flow and air content, the demand of the SP and AEA, heat flux, and 1-d compressive strength of CEMs increased linearly with material temperature.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
In this study, the effect of material temperature during casting on fresh properties, hydration kinetics, and early-age compressive strength of self-consolidating concrete (SCC) was evaluated. Concrete equivalent mortars (CEMs) based on SCC mixture designs with water-to-binder ratios of 0.41 and 0.45 were investigated. The SCC mixtures are targeted for infrastructure and building construction and precast applications. The CEMs were prepared at temperatures ranging from 8 to 36°C. Superplasticizer (SP) and air-entraining agent (AEA) demand were evaluated for the CEM mixtures made with different supplementary cementing material (SCM) and limestone filler types. Test results showed that the ambient temperature can significantly affect the SP and AEA demand, hydration kinetics, and compressive strength after 1 d of age. According to the ultraviolet–visible spectrophotometry (UV/Vis) test, the absorption rate of polycarboxylate-based SP decreased with temperature. In contrast, the sensitivity of polynaphthalene sulfonate-based SP to temperature was minimal. Relationships between the variations of different admixture contents, heat flux, and compressive strength with temperature were developed. For a constant slump flow and air content, the demand of the SP and AEA, heat flux, and 1-d compressive strength of CEMs increased linearly with material temperature. |
2020Article de journal ER2 Auteurs : Wang, Dongxing; Wang, Hongwei; Larsson, Stefan; Benzerzour, Mahfoud; Maherzi, Walid; Amar, Mouhamadou Effect of basalt fiber inclusion on the mechanical properties and microstructure of cement-solidified kaolinite Dans: Construction and Building Materials, vol. 241, p. 118085, 2020, ISSN: 0950-0618, (ACL). Résumé | Liens @article{WANG2020118085,
title = {Effect of basalt fiber inclusion on the mechanical properties and microstructure of cement-solidified kaolinite},
author = {Dongxing Wang and Hongwei Wang and Stefan Larsson and Mahfoud Benzerzour and Walid Maherzi and Mouhamadou Amar},
url = {http://www.sciencedirect.com/science/article/pii/S0950061820300908},
doi = {https://doi.org/10.1016/j.conbuildmat.2020.118085},
issn = {0950-0618},
year = {2020},
date = {2020-01-01},
journal = {Construction and Building Materials},
volume = {241},
pages = {118085},
abstract = {The polypropylene fibers, which are currently attracting enormous attention in various geotechnical applications, carry a risk of aging under an integrated effect of heat, oxygen, light and other environmental factors, causing potentially infrastructure failure. An eco-friendly and biologically inactive material – basalt fiber, which has excellent natural resistance to aging and can eliminate aging-associated disasters, deserves more attention in geotechnical field. However, quite few studies are available on the beneficial reuse of basalt fibers to improve the engineering performance of soils. Therefore, this study aims to incorporate the sustainable basalt fiber and clarify how its inclusion impacts the mechanical properties and microstructure of cemented kaolinite. The experimental programs are comprised of three types of tests, i.e. two to examine the compressive strength and triaxial shear behavior and one to evaluate the microstructure properties. The results indicate that the basalt fiber reinforcement plays an essential role in enhancing the compressive strength and peak deviatoric stress of cemented and uncemented kaolinite. The inclusion of basalt fibers improves the ductility and weakens the brittleness of cemented kaolinite. The compressive strength increases with basalt fiber content and curing time, and reaches the peak at the fiber content of 0.2%, followed by a reduction due to the formation of weak zone at higher fiber content. The peak deviatoric stress is elevated until reaching the maximum at the basalt fiber content of 0.4%, after which further addition of basalt fiber tends to reduce its reinforcing effect. The peak deviatoric stress increases as the basalt fiber length is shortened and the confining pressure is raised. The strength gain of cement-basalt fiber inclusion is much more than the sum of strength increase induced by them individually. The combination of basalt fiber and cement has the virtues of both cement-stabilized and basalt fiber-reinforced kaolinite. The SEM analysis reveals that the mechanical interaction in the form of interface bonding and friction between kaolinite particle, cement hydration product and basalt fiber is the dominant mechanism controlling the reinforcement-cementation benefits. The bridging effect (reinforcement) of basalt fibers and binding effect (cementation) of hydration products make a major contribution to the formation of stable and interconnected microstructure, which results in an evident improvement in the mechanical behaviour of cemented kaolinite. The combination of basalt fiber and cement stabilization would be an innovative and effective method for geotechnical engineering works such as soft ground improvement.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The polypropylene fibers, which are currently attracting enormous attention in various geotechnical applications, carry a risk of aging under an integrated effect of heat, oxygen, light and other environmental factors, causing potentially infrastructure failure. An eco-friendly and biologically inactive material – basalt fiber, which has excellent natural resistance to aging and can eliminate aging-associated disasters, deserves more attention in geotechnical field. However, quite few studies are available on the beneficial reuse of basalt fibers to improve the engineering performance of soils. Therefore, this study aims to incorporate the sustainable basalt fiber and clarify how its inclusion impacts the mechanical properties and microstructure of cemented kaolinite. The experimental programs are comprised of three types of tests, i.e. two to examine the compressive strength and triaxial shear behavior and one to evaluate the microstructure properties. The results indicate that the basalt fiber reinforcement plays an essential role in enhancing the compressive strength and peak deviatoric stress of cemented and uncemented kaolinite. The inclusion of basalt fibers improves the ductility and weakens the brittleness of cemented kaolinite. The compressive strength increases with basalt fiber content and curing time, and reaches the peak at the fiber content of 0.2%, followed by a reduction due to the formation of weak zone at higher fiber content. The peak deviatoric stress is elevated until reaching the maximum at the basalt fiber content of 0.4%, after which further addition of basalt fiber tends to reduce its reinforcing effect. The peak deviatoric stress increases as the basalt fiber length is shortened and the confining pressure is raised. The strength gain of cement-basalt fiber inclusion is much more than the sum of strength increase induced by them individually. The combination of basalt fiber and cement has the virtues of both cement-stabilized and basalt fiber-reinforced kaolinite. The SEM analysis reveals that the mechanical interaction in the form of interface bonding and friction between kaolinite particle, cement hydration product and basalt fiber is the dominant mechanism controlling the reinforcement-cementation benefits. The bridging effect (reinforcement) of basalt fibers and binding effect (cementation) of hydration products make a major contribution to the formation of stable and interconnected microstructure, which results in an evident improvement in the mechanical behaviour of cemented kaolinite. The combination of basalt fiber and cement stabilization would be an innovative and effective method for geotechnical engineering works such as soft ground improvement. |
2020Article de journal ER2 Auteurs : Hamouche, Fawzi; Zentar, Rachid Effects of organic matter on mechanical properties of dredged sediments for beneficial use in road construction Dans: Environmental technology, 2020, (ACL). Résumé | Liens @article{pop00001,
title = {Effects of organic matter on mechanical properties of dredged sediments for beneficial use in road construction},
author = {Fawzi Hamouche and Rachid Zentar},
url = {https://iahr.tandfonline.com/doi/abs/10.1080/09593330.2018.1497711},
doi = {10.1080/09593330.2018.1497711},
year = {2020},
date = {2020-01-01},
journal = {Environmental technology},
publisher = {iahr.tandfonline.com},
abstract = {In France, the road construction sector is the greatest consumer of granular materials, with a yearly consumption of about 200 million tons. With the shortage of standard materials, the valorisation of dredged sediments for road construction could constitute an interesting solution. Dredged sediments generally consist of a mineral phase, an organic phase (in various forms) and a liquid phase (water). The presence of organic matter (OM) in sediments, even in small amounts, affects their engineering properties. The main objective of this study is to investigate the effects of organic matter content on the engineering properties of dredged sediments. For this purpose, a specific methodology to reconstitute samples with different amounts of organic matter contents is proposed. The evaluation of the effects of organic matter content in term of compressibility, shear strength, compaction and bearing capacity show that even for high amount of organic matter the performances of the studied samples are compatible with the use in road construction sector.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
In France, the road construction sector is the greatest consumer of granular materials, with a yearly consumption of about 200 million tons. With the shortage of standard materials, the valorisation of dredged sediments for road construction could constitute an interesting solution. Dredged sediments generally consist of a mineral phase, an organic phase (in various forms) and a liquid phase (water). The presence of organic matter (OM) in sediments, even in small amounts, affects their engineering properties. The main objective of this study is to investigate the effects of organic matter content on the engineering properties of dredged sediments. For this purpose, a specific methodology to reconstitute samples with different amounts of organic matter contents is proposed. The evaluation of the effects of organic matter content in term of compressibility, shear strength, compaction and bearing capacity show that even for high amount of organic matter the performances of the studied samples are compatible with the use in road construction sector. |
2020Article de journal ER2 Auteurs : Akacem, Mustapha; Zentar, Rachid; Mekerta, Belkacem; Sadok, Abdelfteh; Omar, Hassan-Moulay Co-valorisation of Local Materials Tuffs and Dune Sands in Construction of Roads. Dans: Geotechnical and Geological Engineering, vol. 38, p. 435-447, 2020, (ACL). Résumé | Liens @article{pop00002,
title = {Co-valorisation of Local Materials Tuffs and Dune Sands in Construction of Roads.},
author = {Mustapha Akacem and Rachid Zentar and Belkacem Mekerta and Abdelfteh Sadok and Hassan-Moulay Omar},
url = {https://link.springer.com/article/10.1007/s10706-019-01035-4},
doi = {10.1007/s10706-019-01035-4},
year = {2020},
date = {2020-01-01},
journal = {Geotechnical and Geological Engineering},
volume = {38},
pages = {435-447},
publisher = {Springer},
abstract = {The main objective of this study is to enhance the performances of local materials in order to be used in road construction sector. To enhance the performances of this local materials, the strategy adopted is to combine the beneficial effects of mixing different materials and treatment using binders. The materials used in this study are tuffs and dune sands. Hence the present work is also a contribution to the co-valorisation of local materials in arid region of the south of Algeria. According to the results obtained, it is shown that the tuffs of the Saharan regions are suitable for the use of Saharan pavements, particularly in base layers and foundations. The incorporation of dune sand up to 20% improves the mechanical performance. The binders treatment (cement, lime and cement/lime) have induced a further improvement in bearing capacity and compressive strength as well as tensile strength. With these improvement, the materials could be used in roads with heavy and important traffic.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The main objective of this study is to enhance the performances of local materials in order to be used in road construction sector. To enhance the performances of this local materials, the strategy adopted is to combine the beneficial effects of mixing different materials and treatment using binders. The materials used in this study are tuffs and dune sands. Hence the present work is also a contribution to the co-valorisation of local materials in arid region of the south of Algeria. According to the results obtained, it is shown that the tuffs of the Saharan regions are suitable for the use of Saharan pavements, particularly in base layers and foundations. The incorporation of dune sand up to 20% improves the mechanical performance. The binders treatment (cement, lime and cement/lime) have induced a further improvement in bearing capacity and compressive strength as well as tensile strength. With these improvement, the materials could be used in roads with heavy and important traffic. |
2019Conférence ER2 Auteurs : Chafei, Sawsen; Gomina, Moussa Propriétés d’un composite cimentaire incorporant des fibres de lin traitées à l’acide citrique 3ème Conférence internationale sur la Mécanique des Matériaux et des Structures, 2019, (ACTI). @conference{CHAF2019S,
title = {Propriétés d’un composite cimentaire incorporant des fibres de lin traitées à l’acide citrique},
author = {Sawsen Chafei and Moussa Gomina},
year = {2019},
date = {2019-11-13},
booktitle = {3ème Conférence internationale sur la Mécanique des Matériaux et des Structures},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2019Article de journal ER2 Auteurs : Karam, Reine; Bulteel, David; Wattez, Thomas; Deneele, Dimitri Effect of marine sediments incorporation on the behaviour of alkali-activated GGBFS Dans: Materials and Structures, vol. 52, no. 6, 2019, (ACL). Liens @article{Karam2019,
title = {Effect of marine sediments incorporation on the behaviour of alkali-activated GGBFS},
author = {Reine Karam and David Bulteel and Thomas Wattez and Dimitri Deneele},
doi = {10.1617/s11527-019-1408-z},
year = {2019},
date = {2019-10-01},
journal = {Materials and Structures},
volume = {52},
number = {6},
publisher = {Springer Science and Business Media LLC},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Conférence ER2 Auteurs : Courtois, Nicolas; Cau-Dit-Coumes, Céline; Poulesquen, Arnaud; Haas, Jérémy; Ben-Hadj-Hassine, Seif; Bulteel, David Relationship between composition, rheological and swelling properties of alkali-silica gels produced in cemented waste packages ICCC 2019 - 15textsuperscriptth International Congress on the Chemistry of Cement, 2019, (ACTI). @conference{Cour2019b,
title = {Relationship between composition, rheological and swelling properties of alkali-silica gels produced in cemented waste packages},
author = {Nicolas Courtois and Céline Cau-Dit-Coumes and Arnaud Poulesquen and Jérémy Haas and Seif Ben-Hadj-Hassine and David Bulteel},
year = {2019},
date = {2019-09-20},
booktitle = {ICCC 2019 - 15textsuperscriptth International Congress on the Chemistry of Cement},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2019Divers ER2 Auteurs : Courtois, Nicolas; Cau-Dit-Coumes, Céline; Poulesquen, Arnaud; Haas, Jérémy; Ben-Hadj-Hassine, Seif; Bulteel, David Présentation dans un séminaire au Massachussetts Institute of Technology Séminaire réaction alcali-silice, 2019, (AI, ICTS). @misc{Cour2019a,
title = {Présentation dans un séminaire au Massachussetts Institute of Technology},
author = {Nicolas Courtois and Céline Cau-Dit-Coumes and Arnaud Poulesquen and Jérémy Haas and Seif Ben-Hadj-Hassine and David Bulteel},
year = {2019},
date = {2019-04-23},
howpublished = {Séminaire réaction alcali-silice},
note = {AI, ICTS},
keywords = {ER2},
pubstate = {published},
tppubtype = {misc}
}
|
2019Article de journal ER2 Auteurs : Patault, Edouard; Alary, Claire; Franke, Christine; Gauthier, Arnaud; Abriak, Nor-Edine Assessing temporal variability and controlling factors of the sediment budget of a small agricultural catchment in Northern France (the Pommeroye) Dans: Heliyon, vol. 5, no. 3, p. e01407, 2019, ((IF N/A [2018]; Q1)). Liens @article{patault:hal-02080378,
title = {Assessing temporal variability and controlling factors of the sediment budget of a small agricultural catchment in Northern France (the Pommeroye)},
author = {Edouard Patault and Claire Alary and Christine Franke and Arnaud Gauthier and Nor-Edine Abriak},
url = {https://hal.science/hal-02080378},
doi = {10.1016/j.heliyon.2019.e01407},
year = {2019},
date = {2019-03-01},
journal = {Heliyon},
volume = {5},
number = {3},
pages = {e01407},
publisher = {Elsevier },
note = {(IF N/A [2018]; Q1)},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Bala, Mokrane; Zentar, Rachid; Boustingorry, Pascal Parameter determination of the Compressible Packing Model (CPM) for concrete application Dans: Powder Technology, 2019, (ACL). Résumé | Liens @article{pop00005,
title = {Parameter determination of the Compressible Packing Model (CPM) for concrete application},
author = {Mokrane Bala and Rachid Zentar and Pascal Boustingorry},
url = {https://www.sciencedirect.com/science/article/pii/S0032591019310460},
doi = {10.1016/j.powtec.2019.11.085},
year = {2019},
date = {2019-01-01},
journal = {Powder Technology},
publisher = {Elsevier},
abstract = {The packing density of granular materials is in the centre of interest of many industries. For concrete industry, the packing density of aggregates is the most representative physical parameter of the granular mixtures: it combines the grain size and the morphology of grains …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The packing density of granular materials is in the centre of interest of many industries. For concrete industry, the packing density of aggregates is the most representative physical parameter of the granular mixtures: it combines the grain size and the morphology of grains … |
2019Article de journal ER2 Auteurs : Zentar, Rachid; Bala, Mokrane; Boustingorry, Pascal Influence of the Granular Mixture Properties on the Rheological Properties of Concrete: Yield Stress Determination Using Modified Chateau et al. Model Dans: International Journal of …, 2019, (ACL). Résumé | Liens @article{pop00006,
title = {Influence of the Granular Mixture Properties on the Rheological Properties of Concrete: Yield Stress Determination Using Modified Chateau et al. Model},
author = {Rachid Zentar and Mokrane Bala and Pascal Boustingorry},
url = {https://publications.waset.org/10010829/influence-of-the-granular-mixture-properties-on-the-rheological-properties-of-concrete-yield-stress-determination-using-modified-chateau-et-al-model},
year = {2019},
date = {2019-01-01},
journal = {International Journal of …},
publisher = {publications.waset.org},
abstract = {The prediction of the rheological behavior of concrete is at the center of current concerns of the concrete industry for different reasons. The shortage of good quality standard materials combined with variable properties of available materials imposes to improve existing models …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The prediction of the rheological behavior of concrete is at the center of current concerns of the concrete industry for different reasons. The shortage of good quality standard materials combined with variable properties of available materials imposes to improve existing models … |
2019Article de journal ER2 Auteurs : Dia, Moussa; Zentar, Rachid; Abriak, Nor-Edine; Nzihou, Ange; Depelsenaire, Guy; Germeau, Alain. Effect of phosphatation and calcination on the environmental behaviour of sediments Dans: International Journal of Sediment Research, 2019, (ACL). Résumé | Liens @article{pop00007,
title = {Effect of phosphatation and calcination on the environmental behaviour of sediments},
author = {Moussa Dia and Rachid Zentar and Nor-Edine Abriak and Ange Nzihou and Guy Depelsenaire and Alain. Germeau},
url = {https://www.sciencedirect.com/science/article/pii/S1001627918302257},
doi = {10.1016/j.ijsrc.2018.10.002},
year = {2019},
date = {2019-01-01},
journal = {International Journal of Sediment Research},
publisher = {Elsevier},
abstract = {Dredging operations produce considerable quantities of materials, to be managed and this opens an opportunity for valorization in civil engineering. However, the contamination of the dredged sediments has become a major problem to solve. The major contaminants are …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Dredging operations produce considerable quantities of materials, to be managed and this opens an opportunity for valorization in civil engineering. However, the contamination of the dredged sediments has become a major problem to solve. The major contaminants are … |
2019Conférence ER2 Auteurs : Li, S; Boussatour, G; Cresson, P -Y; Genestie, Benoit; Joly, N; Lasri, T Wide Band (0,5-67 GHz) Dielectric Properties of Biosourced Cellulose Ester Flexible Films 2019, (cited By 0). Liens @conference{Li2019112,
title = {Wide Band (0,5-67 GHz) Dielectric Properties of Biosourced Cellulose Ester Flexible Films},
author = {S Li and G Boussatour and P -Y Cresson and Benoit Genestie and N Joly and T Lasri},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85075059271&doi=10.1109%2fIMWS-AMP.2019.8880132&partnerID=40&md5=f5c58ea74711884d20a99575f20d5d4e},
doi = {10.1109/IMWS-AMP.2019.8880132},
year = {2019},
date = {2019-01-01},
journal = {IMWS-AMP 2019 - 2019 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications},
pages = {112-114},
note = {cited By 0},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2019Article de journal ER2 Auteurs : Sango, Thomas; Stoclet, Gregory; Joly, Nicolas; Marin, Adeline; Yona, Arnaud-M Cheumani; Duchatel-Crépy, Lucie; Ndikontar, Maurice Kor; Lefebvre, Jean–Marc Water–soluble extracts from banana pseudo–stem as functional additives for polylactic acid: Thermal and mechanical investigations Dans: European Polymer Journal, vol. 112, p. 466 - 476, 2019, ISSN: 0014-3057, (ACL). Résumé | Liens @article{SANGO2019466,
title = {Water–soluble extracts from banana pseudo–stem as functional additives for polylactic acid: Thermal and mechanical investigations},
author = {Thomas Sango and Gregory Stoclet and Nicolas Joly and Adeline Marin and Arnaud-M Cheumani Yona and Lucie Duchatel-Crépy and Maurice Kor Ndikontar and Jean–Marc Lefebvre},
url = {http://www.sciencedirect.com/science/article/pii/S0014305718318718},
doi = {https://doi.org/10.1016/j.eurpolymj.2019.01.009},
issn = {0014-3057},
year = {2019},
date = {2019-01-01},
journal = {European Polymer Journal},
volume = {112},
pages = {466 - 476},
abstract = {Water–Soluble Extracts (WSE) were obtained from Banana Pseudo–stems (BPS) using a simple and robust deconstruction procedure. WSE were characterized by FTIR, WAXS, TGA–DTG analysis. With the objective of developing fully bio–based polymer formulations, WSE fillers were blended to Poly Lactic Acid (PLA) using a solution blending, casting and thermocompression process. Thermal and mechanical properties were investigated by Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA) and uniaxial tensile tests on neat–PLA (n–PLA) and PLA/WSE blends at various filler contents. Thermal DSC investigations established that WSE act as a plasticizer on PLA. This was further confirmed by DMA by the shift of the loss factor (tan δ) peak maximum towards lower temperatures. WSE also significantly impacted the thermally induced crystallization of PLA and the nucleating power of WSE was assessed by isothermal and non–isothermal studies. WSE had a detrimental effect on PLA brittleness and a slightly positive influence on its stiffness in the glassy state, whereas the drawability remained fairly acceptable when PLA–based materials where drawn at 75 °C above Tg. Moreover, WSE induced an earlier strain–hardening of the composite films as compared to neat PLA. These results underline the valorization potential of such agricultural by–products for sustainable polymer applications in the packaging industry.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Water–Soluble Extracts (WSE) were obtained from Banana Pseudo–stems (BPS) using a simple and robust deconstruction procedure. WSE were characterized by FTIR, WAXS, TGA–DTG analysis. With the objective of developing fully bio–based polymer formulations, WSE fillers were blended to Poly Lactic Acid (PLA) using a solution blending, casting and thermocompression process. Thermal and mechanical properties were investigated by Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA) and uniaxial tensile tests on neat–PLA (n–PLA) and PLA/WSE blends at various filler contents. Thermal DSC investigations established that WSE act as a plasticizer on PLA. This was further confirmed by DMA by the shift of the loss factor (tan δ) peak maximum towards lower temperatures. WSE also significantly impacted the thermally induced crystallization of PLA and the nucleating power of WSE was assessed by isothermal and non–isothermal studies. WSE had a detrimental effect on PLA brittleness and a slightly positive influence on its stiffness in the glassy state, whereas the drawability remained fairly acceptable when PLA–based materials where drawn at 75 °C above Tg. Moreover, WSE induced an earlier strain–hardening of the composite films as compared to neat PLA. These results underline the valorization potential of such agricultural by–products for sustainable polymer applications in the packaging industry. |
2019Article de journal ER2 Auteurs : Liu, X; Xia, Y; Lin, M; Benzerzour, Mahfoud Experimental study of rockburst under true-triaxial gradient loading conditions Dans: Geomechanics and Engineering, vol. 18, no. 5, p. 481-492, 2019, (ACL). Liens @article{Liu2019481,
title = {Experimental study of rockburst under true-triaxial gradient loading conditions},
author = {X Liu and Y Xia and M Lin and Mahfoud Benzerzour},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073286931&doi=10.12989%2fgae.2019.18.5.481&partnerID=40&md5=32f6c73da574b93cc31aa4d4ad705ef9},
doi = {10.12989/gae.2019.18.5.481},
year = {2019},
date = {2019-01-01},
journal = {Geomechanics and Engineering},
volume = {18},
number = {5},
pages = {481-492},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Ennahal, I; Maherzi, Walid; Mamindy-Pajany, Yannick; Benzerzour, Mahfoud; Abriak, Nor-Edine Eco-friendly polymers mortar for floor covering based on dredged sediments of the north of France Dans: Journal of Material Cycles and Waste Management, vol. 21, no. 4, p. 861-871, 2019, (ACL). Liens @article{Ennahal2019861,
title = {Eco-friendly polymers mortar for floor covering based on dredged sediments of the north of France},
author = {I Ennahal and Walid Maherzi and Yannick Mamindy-Pajany and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85061614094&doi=10.1007%2fs10163-019-00843-3&partnerID=40&md5=53952c988fdcc3c338a2b1d3121d1b23},
doi = {10.1007/s10163-019-00843-3},
year = {2019},
date = {2019-01-01},
journal = {Journal of Material Cycles and Waste Management},
volume = {21},
number = {4},
pages = {861-871},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Safhi, Amine El Mahdi; Benzerzour, Mahfoud; Rivard, P; Abriak, Nor-Edine; Ennahal, I Development of self-compacting mortars based on treated marine sediments Dans: Journal of Building Engineering, vol. 22, p. 252-261, 2019, (ACL). Liens @article{Safhi2019252,
title = {Development of self-compacting mortars based on treated marine sediments},
author = {Amine El Mahdi Safhi and Mahfoud Benzerzour and P Rivard and Nor-Edine Abriak and I Ennahal},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85059226250&doi=10.1016%2fj.jobe.2018.12.024&partnerID=40&md5=af4afad62307c6ff6450629e756999e4},
doi = {10.1016/j.jobe.2018.12.024},
year = {2019},
date = {2019-01-01},
journal = {Journal of Building Engineering},
volume = {22},
pages = {252-261},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Safhi, Amine El Mahdi; Benzerzour, Mahfoud; Rivard, P; Abriak, Nor-Edine Feasibility of using marine sediments in SCC pastes as supplementary cementitious materials Dans: Powder Technology, vol. 344, p. 730-740, 2019, (ACL). Liens @article{elMahdiSafhi2019730,
title = {Feasibility of using marine sediments in SCC pastes as supplementary cementitious materials},
author = {Amine El Mahdi Safhi and Mahfoud Benzerzour and P Rivard and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85058691343&doi=10.1016%2fj.powtec.2018.12.060&partnerID=40&md5=1f2999cfa74ae0d46979d251e181fd9a},
doi = {10.1016/j.powtec.2018.12.060},
year = {2019},
date = {2019-01-01},
journal = {Powder Technology},
volume = {344},
pages = {730-740},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Bouchikhi, A; Benzerzour, Mahfoud; Abriak, Nor-Edine; Maherzi, Walid; Mamindy-Pajany, Yannick Study of the impact of waste glasses types on pozzolanic activity of cementitious matrix Dans: Construction and Building Materials, vol. 197, p. 626-640, 2019, (ACL). Liens @article{Bouchikhi2019626,
title = {Study of the impact of waste glasses types on pozzolanic activity of cementitious matrix},
author = {A Bouchikhi and Mahfoud Benzerzour and Nor-Edine Abriak and Walid Maherzi and Yannick Mamindy-Pajany},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85057470124&doi=10.1016%2fj.conbuildmat.2018.11.180&partnerID=40&md5=26b2a87d43197f488d458d761d5dc88e},
doi = {10.1016/j.conbuildmat.2018.11.180},
year = {2019},
date = {2019-01-01},
journal = {Construction and Building Materials},
volume = {197},
pages = {626-640},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Wang, D; Wang, R; Benzerzour, Mahfoud; Wang, H; Abriak, Nor-Edine Comparison between reactive MgO- and Na2SO4-activated low-calcium fly ash-solidified soils dredged from East Lake, China Dans: Marine Georesources and Geotechnology, 2019, (ACL). Liens @article{Wang2019,
title = {Comparison between reactive MgO- and Na2SO4-activated low-calcium fly ash-solidified soils dredged from East Lake, China},
author = {D Wang and R Wang and Mahfoud Benzerzour and H Wang and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85070794934&doi=10.1080%2f1064119X.2019.1648616&partnerID=40&md5=c56cb94af7415019e3ff97b731ef32d4},
doi = {10.1080/1064119X.2019.1648616},
year = {2019},
date = {2019-01-01},
journal = {Marine Georesources and Geotechnology},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Chabannes, Morgan; Becquart, Frédéric; Abriak, Nor-Edine Shear Strength of Unbound Crop By-Products Using the Direct Shear Box Apparatus Dans: Journal of Renewable Materials, vol. 7, no. 9, p. 855–863, 2019, ISSN: 2164-6341, (ACL). Résumé | Liens @article{jrm.2019.06779,
title = {Shear Strength of Unbound Crop By-Products Using the Direct Shear Box Apparatus},
author = {Morgan Chabannes and Frédéric Becquart and Nor-Edine Abriak},
url = {http://www.techscience.com/jrm/v7n9/30585},
doi = {10.32604/jrm.2019.06779},
issn = {2164-6341},
year = {2019},
date = {2019-01-01},
journal = {Journal of Renewable Materials},
volume = {7},
number = {9},
pages = {855--863},
abstract = {The return to old building methods by mixing crop by-products with mineral binders is arousing great interest in Europe since about 25 years. The use of these bio-aggregates based materials for the design of building envelopes is a valuable opportunity to deal with increasingly demanding thermal regulations. In addition, the regulatory framework is moving towards reducing the overall car-bon footprint of new buildings. Some traditional and historic buildings are based on timber framing with earth-straw as infill material for instance. Hemp concrete is a bio-based material that can be manually tamped in timber stud walls or more recently in the form of precast blocks. Owing to their low compressive strength, bio-based concretes using a large volume fraction of plant-derived aggregates are only considered as thermal and sound insulation materials. The structural design practice of wood frame walls does not assume any mechanical contribution of hemp concrete whereas it may contribute to the racking strength of the structure. In this context, more research is needed regarding the shear behavior of crop by-products and bio-based concretes. In this case, the objective of the study was to perform direct shear tests under three levels of normal pressure on hemp shiv and rice husk as unbound crop by-products. The results showed that the friction angle of the granular skeleton based on rice husk for a given relative displacement was significantly lower than that measured on hemp shiv. This is in accordance with what had been observed on bio-based concretes cast by mixing aggregates with lime and shear strength parameters measured by means of triaxial compression.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The return to old building methods by mixing crop by-products with mineral binders is arousing great interest in Europe since about 25 years. The use of these bio-aggregates based materials for the design of building envelopes is a valuable opportunity to deal with increasingly demanding thermal regulations. In addition, the regulatory framework is moving towards reducing the overall car-bon footprint of new buildings. Some traditional and historic buildings are based on timber framing with earth-straw as infill material for instance. Hemp concrete is a bio-based material that can be manually tamped in timber stud walls or more recently in the form of precast blocks. Owing to their low compressive strength, bio-based concretes using a large volume fraction of plant-derived aggregates are only considered as thermal and sound insulation materials. The structural design practice of wood frame walls does not assume any mechanical contribution of hemp concrete whereas it may contribute to the racking strength of the structure. In this context, more research is needed regarding the shear behavior of crop by-products and bio-based concretes. In this case, the objective of the study was to perform direct shear tests under three levels of normal pressure on hemp shiv and rice husk as unbound crop by-products. The results showed that the friction angle of the granular skeleton based on rice husk for a given relative displacement was significantly lower than that measured on hemp shiv. This is in accordance with what had been observed on bio-based concretes cast by mixing aggregates with lime and shear strength parameters measured by means of triaxial compression. |
2019Article de journal ER2 Auteurs : Thiéry, Vincent Le pont Charles-Marlin (Saint-Georges-Nigremont, Creuse). Historique et caractérisation préliminaire des désordres Dans: Annales du Bâtiment et des Travaux Publics, vol. 70, no. 5-6, p. 7–18, 2019, (ACL). @article{Thiery2019,
title = {Le pont Charles-Marlin (Saint-Georges-Nigremont, Creuse). Historique et caractérisation préliminaire des désordres},
author = {Vincent Thiéry},
year = {2019},
date = {2019-01-01},
journal = {Annales du Bâtiment et des Travaux Publics},
volume = {70},
number = {5-6},
pages = {7--18},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Thiéry, Vincent À la recherche des ciments oubliés Dans: Mines & Carrières, vol. 275, p. 22–25, 2019, (OV). @article{Thiery2019a,
title = {À la recherche des ciments oubliés},
author = {Vincent Thiéry},
year = {2019},
date = {2019-01-01},
journal = {Mines & Carrières},
volume = {275},
pages = {22--25},
note = {OV},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Proceedings Article ER2 Auteurs : Thiéry, Vincent Microstructural investigations on an abandoned 1935 concrete bridge Dans: 16th Euroseminars on Microscopy Applied to Building Materials (EMABM), p. 289–294, 2019, (ACTI). @inproceedings{Thiery2019b,
title = {Microstructural investigations on an abandoned 1935 concrete bridge},
author = {Vincent Thiéry},
year = {2019},
date = {2019-01-01},
booktitle = {16th Euroseminars on Microscopy Applied to Building Materials (EMABM)},
pages = {289--294},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2019Article de journal ER2 Auteurs : Urupina, D; Lasne, J; Romanias, M N; Thiéry, Vincent; Dagsson-Waldhauserova, P; Thevenet, F Uptake and surface chemistry of SO2 on natural volcanic dusts Dans: Atmospheric Environment, vol. 217, p. 116942, 2019, ISSN: 1352-2310, (ACL). Résumé | Liens @article{URUPINA2019116942,
title = {Uptake and surface chemistry of SO2 on natural volcanic dusts},
author = {D Urupina and J Lasne and M N Romanias and Vincent Thiéry and P Dagsson-Waldhauserova and F Thevenet},
url = {http://www.sciencedirect.com/science/article/pii/S1352231019305813},
doi = {https://doi.org/10.1016/j.atmosenv.2019.116942},
issn = {1352-2310},
year = {2019},
date = {2019-01-01},
journal = {Atmospheric Environment},
volume = {217},
pages = {116942},
abstract = {V-dust (v-dust) is a highly variable source of natural particles in the atmosphere, and during the period of high volcanic activity it can provide a large surface for heterogeneous interactions with other atmospheric compounds. Icelandic v-dust was chosen as a case study due to frequency of volcanic eruptions and high aeolian activity in the area. In this study, we focus on the kinetics and mechanism of the reaction of sulfur dioxide (SO2) with natural v-dust samples under atmospheric conditions using coated wall flow tube reactor and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Steady state uptake coefficients determined are in the range of 10−9 to 10−8 depending on the considered v-dust. Concomitantly with SO2 uptake, both sulfites and sulfates are monitored on the surface of v-dust, with sulfates being the final oxidation product, attesting of SO2 surface reaction. Surface hydroxyl groups play a crucial role in the conversion of SO2 to sulfites as evidenced from both flow tube and DRIFTS experiments. Based on these experimental results, a mechanism for SO2 interaction with different surface sites of v-dust is proposed and discussed. This study provides original insights in the kinetics of SO2 uptake under simulated atmospheric conditions and its mechanism and transformation on volcanic material. To that regards, it brings an accurate perspective on SO2 heterogeneous sinks in the atmosphere.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
V-dust (v-dust) is a highly variable source of natural particles in the atmosphere, and during the period of high volcanic activity it can provide a large surface for heterogeneous interactions with other atmospheric compounds. Icelandic v-dust was chosen as a case study due to frequency of volcanic eruptions and high aeolian activity in the area. In this study, we focus on the kinetics and mechanism of the reaction of sulfur dioxide (SO2) with natural v-dust samples under atmospheric conditions using coated wall flow tube reactor and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Steady state uptake coefficients determined are in the range of 10−9 to 10−8 depending on the considered v-dust. Concomitantly with SO2 uptake, both sulfites and sulfates are monitored on the surface of v-dust, with sulfates being the final oxidation product, attesting of SO2 surface reaction. Surface hydroxyl groups play a crucial role in the conversion of SO2 to sulfites as evidenced from both flow tube and DRIFTS experiments. Based on these experimental results, a mechanism for SO2 interaction with different surface sites of v-dust is proposed and discussed. This study provides original insights in the kinetics of SO2 uptake under simulated atmospheric conditions and its mechanism and transformation on volcanic material. To that regards, it brings an accurate perspective on SO2 heterogeneous sinks in the atmosphere. |
2019Article de journal ER2 Auteurs : Thiéry, Vincent Le mouvement de versant d'Arpiat dans la vallée de la Dordogne Dans: Revue des sciences naturelles d'Auvergne, vol. 83, p. 49–56, 2019, (ACL). @article{Thiery2019c,
title = {Le mouvement de versant d'Arpiat dans la vallée de la Dordogne},
author = {Vincent Thiéry},
year = {2019},
date = {2019-01-01},
journal = {Revue des sciences naturelles d'Auvergne},
volume = {83},
pages = {49--56},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sébastien Control of effective water in recycled aggregate concrete using power curves of the mixer Dans: Materials Today Communications, vol. 21, p. 100721, 2019, ISSN: 2352-4928, (ACL). Résumé | Liens @article{KHOURY2019100721,
title = {Control of effective water in recycled aggregate concrete using power curves of the mixer},
author = {Eliane Khoury and Bogdan Cazacliu and Sébastien Remond},
url = {http://www.sciencedirect.com/science/article/pii/S2352492819304921},
doi = {https://doi.org/10.1016/j.mtcomm.2019.100721},
issn = {2352-4928},
year = {2019},
date = {2019-01-01},
journal = {Materials Today Communications},
volume = {21},
pages = {100721},
abstract = {Composed of several components (natural aggregates and attached cement paste), crushed concrete aggregates (CCA) are not widely recommended in new concrete formulations. Their properties considerably complicate the determination of effective water in fresh concrete. The evolution of effective water in fresh concrete during mixing was studied using an original method based on the power evolution of the mixer. The presented experiments analyzed the water migration kinetics during mixing and the level of stabilization of the effective water at the end of the mixing. This analysis was established according to the initial moisture of the CCA and of the type of pores filled with water in these aggregate, and, of the total water in the new concrete mixture. It was shown that the exchange of water between recycled aggregate and the new concrete mixture during the mixing is more complex than generally considered. The water can get into or get out from the CCA, depending on the history of their initial moisture. The direction of water migration can also change at different stages of concrete mixing. Therefore, the amount of effective water decreases or increases during mixing and tends to stabilize once the uniform new concrete is obtained.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Composed of several components (natural aggregates and attached cement paste), crushed concrete aggregates (CCA) are not widely recommended in new concrete formulations. Their properties considerably complicate the determination of effective water in fresh concrete. The evolution of effective water in fresh concrete during mixing was studied using an original method based on the power evolution of the mixer. The presented experiments analyzed the water migration kinetics during mixing and the level of stabilization of the effective water at the end of the mixing. This analysis was established according to the initial moisture of the CCA and of the type of pores filled with water in these aggregate, and, of the total water in the new concrete mixture. It was shown that the exchange of water between recycled aggregate and the new concrete mixture during the mixing is more complex than generally considered. The water can get into or get out from the CCA, depending on the history of their initial moisture. The direction of water migration can also change at different stages of concrete mixing. Therefore, the amount of effective water decreases or increases during mixing and tends to stabilize once the uniform new concrete is obtained. |
2019Conférence ER2 Auteurs : REMOND, S; Grellier, Adèle; Khoury, Eliane; KHALIL, N; Karam, Reine; Bulteel, David Formulation de mortiers imprimables incorporant des matériaux recyclés Workshop : DiXite3dPrint : Fabrication additive pour la construction, 2019, (ACTI, ACTN, AFF, COM, INV). @conference{REMOND2019,
title = {Formulation de mortiers imprimables incorporant des matériaux recyclés},
author = {S REMOND and Adèle Grellier and Eliane Khoury and N KHALIL and Reine Karam and David Bulteel},
year = {2019},
date = {2019-01-01},
booktitle = {Workshop : DiXite3dPrint : Fabrication additive pour la construction},
note = {ACTI, ACTN, AFF, COM, INV},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2019Article de journal ER2 Auteurs : Bouarroudj, Mohamed ElKarim; Remond, Sébastien; Michel, Frédéric; Zhao, Zengfeng; Bulteel, David; Courard, Luc Use of a reference limestone fine aggregate to study the fresh and hard behavior of mortar made with recycled fine aggregate Dans: Materials and Structures, vol. 52, no. 1, 2019, (ACL). Liens @article{Bouarroudj2019,
title = {Use of a reference limestone fine aggregate to study the fresh and hard behavior of mortar made with recycled fine aggregate},
author = {Mohamed ElKarim Bouarroudj and Sébastien Remond and Frédéric Michel and Zengfeng Zhao and David Bulteel and Luc Courard},
doi = {10.1617/s11527-019-1325-1},
year = {2019},
date = {2019-01-01},
journal = {Materials and Structures},
volume = {52},
number = {1},
publisher = {Springer Science and Business Media LLC},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER2 Auteurs : Bala, Mokrane; Zentar, Rachid; Boustingorry, Pascal Comparative study of the yield stress determination of cement pastes by different methods Dans: Materials and Structures, 2019, (ACL). Résumé | Liens @article{pop00003,
title = {Comparative study of the yield stress determination of cement pastes by different methods},
author = {Mokrane Bala and Rachid Zentar and Pascal Boustingorry},
url = {https://link.springer.com/article/10.1617/s11527-019-1403-4},
doi = {10.1617/s11527-019-1403-4},
year = {2019},
date = {2019-01-01},
journal = {Materials and Structures},
publisher = {Springer},
abstract = {Different methods have been proposed inthe literature to determine the yield stress of cementgrouts. These methods may present wide differencesespecially for thixotropic materials such as cementpastes. In this paper, different mixtures of water–cement–superplasticizer were studied for various w/cratios and superplasticizer dosages. From shear tests ofthe mixtures in a rheometer, yield stress was deter-mined in different ways: by identification on theexperimental flow curve or by modelling flow curvethrough different rheological models. The conven-tional rheological models as Bingham model andHerschel–Bulkley model are not in agreement in themajority of the cases studied especially at low shearrates where thixotropy can be observed. In order toenhance the modelling in this area and allows toaccurately determine the yield stress, we compared theresults obtained through the conventional rheologicalmodels to that obtained by a thixotropy model. Fromthe obtained results, it turns out that the latter allows tobetter predict the behaviour of thixotropic cementgrouts and their yield stress.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Different methods have been proposed inthe literature to determine the yield stress of cementgrouts. These methods may present wide differencesespecially for thixotropic materials such as cementpastes. In this paper, different mixtures of water–cement–superplasticizer were studied for various w/cratios and superplasticizer dosages. From shear tests ofthe mixtures in a rheometer, yield stress was deter-mined in different ways: by identification on theexperimental flow curve or by modelling flow curvethrough different rheological models. The conven-tional rheological models as Bingham model andHerschel–Bulkley model are not in agreement in themajority of the cases studied especially at low shearrates where thixotropy can be observed. In order toenhance the modelling in this area and allows toaccurately determine the yield stress, we compared theresults obtained through the conventional rheologicalmodels to that obtained by a thixotropy model. Fromthe obtained results, it turns out that the latter allows tobetter predict the behaviour of thixotropic cementgrouts and their yield stress. |
2019Article de journal ER2 Auteurs : Achour, Raouf; Zentar, Rachid; Abriak, Nor-Edine; Rivard, Patrice; Gregoire, Pascal. Durability study of concrete incorporating dredged sediments Dans: Case Studies in Construction Materials, 2019, (ACL). Résumé | Liens @article{pop00004,
title = {Durability study of concrete incorporating dredged sediments},
author = {Raouf Achour and Rachid Zentar and Nor-Edine Abriak and Patrice Rivard and Pascal. Gregoire},
url = {https://www.sciencedirect.com/science/article/pii/S2214509518303693},
doi = {10.1016/j.cscm.2019.e00244},
year = {2019},
date = {2019-01-01},
journal = {Case Studies in Construction Materials},
publisher = {Elsevier},
abstract = {Every year, significant volumes of marine sediment are dredged from the harbour of Dunkirk, France. These materials may in fact be used beneficially in the composition of new concrete accropode blocks to protect the harbour coastline. This paper evaluates the mechanical …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Every year, significant volumes of marine sediment are dredged from the harbour of Dunkirk, France. These materials may in fact be used beneficially in the composition of new concrete accropode blocks to protect the harbour coastline. This paper evaluates the mechanical … |
2018Conférence ER2 Auteurs : Chafei, Sawsen; D'haese, Romain Evaluation of short flax fibers treatment effect on their properties and on the behavior of a cement composite 2nd EuroMaghrébine Conference of BioComposites, 2018, (ACTI). @conference{CHAF2018S,
title = {Evaluation of short flax fibers treatment effect on their properties and on the behavior of a cement composite},
author = {Sawsen Chafei and Romain D'haese},
year = {2018},
date = {2018-11-03},
booktitle = {2nd EuroMaghrébine Conference of BioComposites},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER2 Auteurs : D'haese, Romain; Dubois, Vincent; Carpentier, Olivier; Chartier, Thierry; Chafei, Sawsen; Wirquin, Eric COMPOSITE FOR ADDITIVE MANUFACTURING INCLUDING FLAX BYPRODUCTS AND QUARRY FINES 2nd EuroMaghrébine Conference of BioComposites, 2018, (ACTI). @conference{,
title = {COMPOSITE FOR ADDITIVE MANUFACTURING INCLUDING FLAX BYPRODUCTS AND QUARRY FINES},
author = {Romain D'haese and Vincent Dubois and Olivier Carpentier and Thierry Chartier and Sawsen Chafei and Eric Wirquin},
year = {2018},
date = {2018-11-03},
booktitle = {2nd EuroMaghrébine Conference of BioComposites},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER2 Auteurs : Courtois, Nicolas; Cau-Dit-Coumes, Céline; Poulesquen, Arnaud; Haas, Jérémy; Ben-Hadj-Hassine, Seif; Bulteel, David Relationship between composition, rheological and swelling properties of alkali-silica gels produced in cemented waste packages NUWCEM 2018 - 3ʳᵈ International Symposium on Cement-Based Materials for Nuclear Wastes, 2018, (ACTI). @conference{Cour2018,
title = {Relationship between composition, rheological and swelling properties of alkali-silica gels produced in cemented waste packages},
author = {Nicolas Courtois and Céline Cau-Dit-Coumes and Arnaud Poulesquen and Jérémy Haas and Seif Ben-Hadj-Hassine and David Bulteel},
year = {2018},
date = {2018-10-26},
booktitle = {NUWCEM 2018 - 3ʳᵈ International Symposium on Cement-Based Materials for Nuclear Wastes},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Article de journal ER2 Auteurs : Kleib, J; Aouad, G; Louis, Ghislain; Zakhour, M; Boulos, M; Rousselet, A; Bulteel, David The use of calcium sulfoaluminate cement to mitigate the alkali silica reaction in mortars Dans: Construction and Building Materials, vol. 184, p. 295–303, 2018, (ACL). Liens @article{Kleib2018,
title = {The use of calcium sulfoaluminate cement to mitigate the alkali silica reaction in mortars},
author = {J Kleib and G Aouad and Ghislain Louis and M Zakhour and M Boulos and A Rousselet and David Bulteel},
doi = {10.1016/j.conbuildmat.2018.06.215},
year = {2018},
date = {2018-09-01},
journal = {Construction and Building Materials},
volume = {184},
pages = {295--303},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Proceedings Article ER2 Auteurs : Bala, Mokrane; Zentar, R.; Boustingorry, Pascal Etude d'impact de la forme des granulats sur les paramètres du modèle d'empilement compressible Dans: 36èmes Rencontres Universitaires de Génie Civil de l'AUGC, Saint-Etienne, France, 2018, (ACTI). Liens @inproceedings{bala:hal-02075087,
title = {Etude d'impact de la forme des granulats sur les paramètres du modèle d'empilement compressible},
author = {Mokrane Bala and R. Zentar and Pascal Boustingorry},
url = {https://hal.science/hal-02075087},
year = {2018},
date = {2018-06-01},
urldate = {2018-06-01},
booktitle = {36èmes Rencontres Universitaires de Génie Civil de l'AUGC},
address = {Saint-Etienne, France},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2018Conférence ER2 Auteurs : Karam, R; D., Deneele; Bulteel, David DEVELOPMENT OF A NEW ALKALI-ACTIVATED BINDER INCORPORATING DREDGED SEDIMENTS International conference on Akali Activated Materials and Geopolymers: Versatile Materials Offering High Performance and Low Emissions, Tomar, Portugal, 2018, (ACTI). @conference{Karam2018,
title = {DEVELOPMENT OF A NEW ALKALI-ACTIVATED BINDER INCORPORATING DREDGED SEDIMENTS},
author = {R Karam and Deneele D. and David Bulteel},
year = {2018},
date = {2018-05-01},
booktitle = {International conference on Akali Activated Materials and Geopolymers: Versatile Materials Offering High Performance and Low Emissions},
address = {Tomar, Portugal},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Article de journal ER2 Auteurs : Govender, Nicolin; Wilke, Daniel; Pizette, Patrick; Abriak, Nor-Edine A study of shape non-uniformity and poly-dispersity in hopper discharge of spherical and polyhedral particle systems using the Blaze-DEM GPU code Dans: Applied Mathematics and Computation, vol. 319, p. 318-336, 2018, (ACL). Liens @article{govender:hal-04320594,
title = {A study of shape non-uniformity and poly-dispersity in hopper discharge of spherical and polyhedral particle systems using the Blaze-DEM GPU code},
author = {Nicolin Govender and Daniel Wilke and Patrick Pizette and Nor-Edine Abriak},
url = {https://hal.science/hal-04320594},
doi = {10.1016/j.amc.2017.03.037},
year = {2018},
date = {2018-02-01},
urldate = {2018-02-01},
journal = {Applied Mathematics and Computation},
volume = {319},
pages = {318-336},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Wang, Dongxing; Zentar, Rachid; Abriak, Nor-Edine Durability and swelling of solidified/stabilized dredged marine soils with class-F fly ash, cement, and lime Dans: Journal of Materials in Civil Engineering, vol. 30, 2018, (ACL). Résumé | Liens @article{pop00008,
title = {Durability and swelling of solidified/stabilized dredged marine soils with class-F fly ash, cement, and lime},
author = {Dongxing Wang and Rachid Zentar and Nor-Edine Abriak},
url = {https://ascelibrary.org/doi/abs/10.1061/%28ASCE%29MT.1943-5533.0002187},
doi = {10.1061/(ASCE)MT.1943-5533.0002187},
year = {2018},
date = {2018-01-01},
journal = {Journal of Materials in Civil Engineering},
volume = {30},
publisher = {ascelibrary.org},
abstract = {Very few studies have been carried out to investigate the durability and swelling behavior of dredged marine materials. To tackle this issue, this study mainly considers the influence of water immersion and thawing-freezing on the stress-strain characteristics and swelling …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Very few studies have been carried out to investigate the durability and swelling behavior of dredged marine materials. To tackle this issue, this study mainly considers the influence of water immersion and thawing-freezing on the stress-strain characteristics and swelling … |
2018Article de journal ER2 Auteurs : Wang, Dongxing; Zentar, Rachid; Abriak, Nor-Edine; Di, Shengjie Long-term mechanical performance of marine sediments solidified with cement, lime, and fly ash Dans: Marine Georesources & Geotechnology, 2018, (ACL). Résumé | Liens @article{pop00009,
title = {Long-term mechanical performance of marine sediments solidified with cement, lime, and fly ash},
author = {Dongxing Wang and Rachid Zentar and Nor-Edine Abriak and Shengjie Di},
url = {https://www.tandfonline.com/doi/abs/10.1080/1064119X.2017.1320600},
doi = {10.1080/1064119X.2017.1320600},
year = {2018},
date = {2018-01-01},
journal = {Marine Georesources & Geotechnology},
publisher = {Taylor & Francis},
abstract = {Most of the previous studies concerning solidification of marine sediments focus mainly on the mechanical properties within the curing time of 90 days, but the long-term (eg, 360 days) behavior has not been fully appreciated. The current study attempts to address this issue by …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Most of the previous studies concerning solidification of marine sediments focus mainly on the mechanical properties within the curing time of 90 days, but the long-term (eg, 360 days) behavior has not been fully appreciated. The current study attempts to address this issue by … |
2018Article de journal ER2 Auteurs : Djafari, Driss; Mekerta, Belkacem; Zentar, Rachid; Semcha, Abdelaziz Sludge of wwtps, from waste family to sustainable development Dans: African Review of Science, technology and development, vol. 3, no. 1, 2018, (ACL). Résumé | Liens @article{pop00010,
title = {Sludge of wwtps, from waste family to sustainable development},
author = {Driss Djafari and Belkacem Mekerta and Rachid Zentar and Abdelaziz Semcha},
url = {https://www.researchgate.net/profile/Driss_Djafari/publication/323759435_SLUDGE_OF_WWTPs_FROM_WASTE_FAMILY_TO_SUSTAINABLE_DEVELOPMENT/links/5ab235c80f7e9b4897c469d2/SLUDGE-OF-WWTPs-FROM-WASTE-FAMILY-TO-SUSTAINABLE-DEVELOPMENT.pdf},
year = {2018},
date = {2018-01-01},
journal = {African Review of Science, technology and development},
volume = {3},
number = {1},
publisher = {researchgate.net},
abstract = {Excess sludge treatment and disposal currently represents a rising challenge for wastewater treatment plants due to economic, environmental and regulation factors. There is therefore considerable impetus to explore and develop strategies and technologies for reducing …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Excess sludge treatment and disposal currently represents a rising challenge for wastewater treatment plants due to economic, environmental and regulation factors. There is therefore considerable impetus to explore and develop strategies and technologies for reducing … |
2018Article de journal ER2 Auteurs : Akacem, Mustapha; Mekerta, Belkaceme; Zentar, Rachid; Omar, Hassan-Moulay; Abbou, Mohamed Valorisation of fine dune sand in asphalt concrete Dans: REVISTA INTERNACIONAL DE CONTAMINACION AMBIENTAL, vol. 34, p. 317-322, 2018, (ACL). Résumé | Liens @article{pop00012,
title = {Valorisation of fine dune sand in asphalt concrete},
author = {Mustapha Akacem and Belkaceme Mekerta and Rachid Zentar and Hassan-Moulay Omar and Mohamed Abbou},
url = {https://www.researchgate.net/profile/Diogenes_Hernandez3/publication/330141509_Characterizing_the_evolution_of_sediment_like_wastes_exposed_to_ambient_conditions_in_open_reservoirs/links/5c2f5b6da6fdccd6b590bf0c/Characterizing-the-evolution-of-sediment-like-wastes-exposed-to-ambient-conditions-in-open-reservoirs.pdf#page=331},
year = {2018},
date = {2018-01-01},
urldate = {2018-01-01},
journal = {REVISTA INTERNACIONAL DE CONTAMINACION AMBIENTAL},
volume = {34},
pages = {317-322},
publisher = {researchgate.net},
abstract = {The south region of Algeria is characterized by a wide surface, a scattered population and a very small ratio of road length per habitant. To allow the development of agricultural, industrial and touristic activities between different cities in the south of Algeria, it is …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The south region of Algeria is characterized by a wide surface, a scattered population and a very small ratio of road length per habitant. To allow the development of agricultural, industrial and touristic activities between different cities in the south of Algeria, it is … |
2018Article de journal ER2 Auteurs : Nguyen, T -K; Carpentier, Olivier; Monchau, Francine; Chai, F; Hornez, J C; Hivart, Philippe Numerical optimization of cell colonization modelling inside scaffold for perfusion bioreactor: A multiscale model Dans: Medical Engineering and Physics, vol. 57, p. 40-50, 2018, (cited By 4). Liens @article{Nguyen201840,
title = {Numerical optimization of cell colonization modelling inside scaffold for perfusion bioreactor: A multiscale model},
author = {T -K Nguyen and Olivier Carpentier and Francine Monchau and F Chai and J C Hornez and Philippe Hivart},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85046702227&doi=10.1016%2fj.medengphy.2018.04.012&partnerID=40&md5=432916873ff02303a4ae60d059a30466},
doi = {10.1016/j.medengphy.2018.04.012},
year = {2018},
date = {2018-01-01},
journal = {Medical Engineering and Physics},
volume = {57},
pages = {40-50},
note = {cited By 4},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Roensmaens, B; Parys, L Van; Carpentier, Olivier; Descamps, T Refurbishment of existing timber floors with screwed CLT panels Dans: International Journal of Architectural Heritage, vol. 12, no. 4, p. 622-631, 2018, (cited By 3). Liens @article{Roensmaens2018622,
title = {Refurbishment of existing timber floors with screwed CLT panels},
author = {B Roensmaens and L Van Parys and Olivier Carpentier and T Descamps},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85044180736&doi=10.1080%2f15583058.2018.1442522&partnerID=40&md5=4e0d18661cbd6b00d05efa295e8d6d67},
doi = {10.1080/15583058.2018.1442522},
year = {2018},
date = {2018-01-01},
journal = {International Journal of Architectural Heritage},
volume = {12},
number = {4},
pages = {622-631},
note = {cited By 3},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Boussatour, G; Cresson, P Y; Genestie, Benoit; Joly, N; Brun, J F; Lasri, T Measurement of the thermal conductivity of flexible biosourced polymers using the 3-omega method Dans: Polymer Testing, vol. 70, p. 503-510, 2018, (cited By 1). Liens @article{Boussatour2018503,
title = {Measurement of the thermal conductivity of flexible biosourced polymers using the 3-omega method},
author = {G Boussatour and P Y Cresson and Benoit Genestie and N Joly and J F Brun and T Lasri},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85051141335&doi=10.1016%2fj.polymertesting.2018.07.026&partnerID=40&md5=6be62d8647b4f3c3c44e1b6f7d12caba},
doi = {10.1016/j.polymertesting.2018.07.026},
year = {2018},
date = {2018-01-01},
journal = {Polymer Testing},
volume = {70},
pages = {503-510},
note = {cited By 1},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Boussatour, G; Cresson, P -Y; Genestie, Benoit; Joly, N; Lasri, T Dielectric Characterization of Polylactic Acid Substrate in the Frequency Band 0.5-67 GHz Dans: IEEE Microwave and Wireless Components Letters, vol. 28, no. 5, p. 374-376, 2018, (cited By 3). Liens @article{Boussatour2018374,
title = {Dielectric Characterization of Polylactic Acid Substrate in the Frequency Band 0.5-67 GHz},
author = {G Boussatour and P -Y Cresson and Benoit Genestie and N Joly and T Lasri},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85044388896&doi=10.1109%2fLMWC.2018.2812642&partnerID=40&md5=10169ff1615c6d77d866374af6c1e15a},
doi = {10.1109/LMWC.2018.2812642},
year = {2018},
date = {2018-01-01},
journal = {IEEE Microwave and Wireless Components Letters},
volume = {28},
number = {5},
pages = {374-376},
note = {cited By 3},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Quedou, Pritish Gupta; Wirquin, Eric; Bokhoree, Chandradeo; Jaleem, Kushal; Aubeeluck, Ridhin Study on the Replacement of Construction &Demolition Waste Materials as Fine Aggregates inthe Production of Low Strength Concrete Dans: International Journal for Research in Applied Science & Engineering Technology, vol. 6, no. V, p. 2108-2115, 2018, ISSN: 2321-9653, (ACL). Résumé @article{,
title = {Study on the Replacement of Construction &Demolition Waste Materials as Fine Aggregates inthe Production of Low Strength Concrete},
author = {Pritish Gupta Quedou and Eric Wirquin and Chandradeo Bokhoree and Kushal Jaleem and Ridhin Aubeeluck},
issn = {2321-9653},
year = {2018},
date = {2018-01-01},
journal = {International Journal for Research in Applied Science & Engineering Technology},
volume = {6},
number = {V},
pages = {2108-2115},
abstract = {The construction industry is searching for a more ecological material which can provide a good sustainability and also
have the eco-friendly label. The quest to protect the environment has enabled researches to find alternate materials which can fit
the concrete matrix to produce a concrete that can meet the demand of the construction industry. The purpose of this research is
to substitute traditional materials with construction and demolition waste by keeping the same slump value and by replacing
natural fine aggregates (NFA) with Construction and Demolition Waste (C&D) materials and investigate their properties on
fresh and hardened concrete. To determine and compare the properties, different tests were performed to evaluate the
workability, density, compressive strength, flexural strength and absorption of each concrete mix. The results demonstrated that,
construction and demolition waste materials with a define slump range decreases the compressive strength and flexural strength,
and the water absorption increases with increasing C&D content.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The construction industry is searching for a more ecological material which can provide a good sustainability and also
have the eco-friendly label. The quest to protect the environment has enabled researches to find alternate materials which can fit
the concrete matrix to produce a concrete that can meet the demand of the construction industry. The purpose of this research is
to substitute traditional materials with construction and demolition waste by keeping the same slump value and by replacing
natural fine aggregates (NFA) with Construction and Demolition Waste (C&D) materials and investigate their properties on
fresh and hardened concrete. To determine and compare the properties, different tests were performed to evaluate the
workability, density, compressive strength, flexural strength and absorption of each concrete mix. The results demonstrated that,
construction and demolition waste materials with a define slump range decreases the compressive strength and flexural strength,
and the water absorption increases with increasing C&D content. |
2018Conférence ER2 Auteurs : Colman, C; Zhao, Z; Michel, F; Rémond, S; Bulteel, David; Courard, L Gypsum residues in recycled materials: characterization of fine recycled aggregates SLD4 - 4th international conference on Service Life Design for infrastructure, Delft, Netherlands, 2018, (ACTI). @conference{Colman2018,
title = {Gypsum residues in recycled materials: characterization of fine recycled aggregates},
author = {C Colman and Z Zhao and F Michel and S Rémond and David Bulteel and L Courard},
year = {2018},
date = {2018-01-01},
booktitle = {SLD4 - 4th international conference on Service Life Design for infrastructure},
address = {Delft, Netherlands},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Article de journal ER2 Auteurs : Sango, Thomas; Yona, Arnaud-Maxime Cheumani; Duchatel-Crépy, Lucie; Marin, Adeline; Ndikontar, Maurice Kor; Joly, Nicolas; Lefebvre, Jean-Marc Step–wise multi–scale deconstruction of banana pseudo–stem (Musa acuminata) biomass and morpho–mechanical characterization of extracted long fibres for sustainable applications Dans: Industrial Crops and Products, vol. 122, p. 657 - 668, 2018, ISSN: 0926-6690, (ACL). Résumé | Liens @article{SANGO2018657,
title = {Step–wise multi–scale deconstruction of banana pseudo–stem (Musa acuminata) biomass and morpho–mechanical characterization of extracted long fibres for sustainable applications},
author = {Thomas Sango and Arnaud-Maxime Cheumani Yona and Lucie Duchatel-Crépy and Adeline Marin and Maurice Kor Ndikontar and Nicolas Joly and Jean-Marc Lefebvre},
url = {http://www.sciencedirect.com/science/article/pii/S0926669018305594},
doi = {https://doi.org/10.1016/j.indcrop.2018.06.050},
issn = {0926-6690},
year = {2018},
date = {2018-01-01},
journal = {Industrial Crops and Products},
volume = {122},
pages = {657 - 668},
abstract = {Banana Pseudo–stem (BPS) is an annual renewable agricultural by–product with a potential for valorization in the production of paper, textile fibre or new bio–based materials. A gradual deconstruction process was implemented to determine BPS chemical composition and isolate sub–components that may be valorized in the formulation of bio–based polymer composites. At each step, the residues were analyzed by FTIR, X–ray diffraction and TGA–DTG. The chemical composition of the starting material (% of dry weight) was evaluated as: 13.4% total extractives, 6% pectins, 14.7% lignins, 28% hemicelluloses and 38% cellulose. The deconstruction process for BPS was efficient but led to mercerized cellulose (cellulose II) as a final residue, as assessed by the intense X–ray scattering peaks centered at 20.5° and 21.5°. Cellulose II formation was induced by the high concentration of the alkaline KOH solution used to dissolve hemicelluloses in holocellulose. The step–wise removal of non–cellulosic sub–components led to a more thermally stable residue. Long fibres were also obtained from BPS at a yield of 60%. These fibres display cellulose I structure and a thermal stability similar to the extracted cellulose. SEM analyses of long fibres showed transversal and lateral defects, the presence of surface hairiness and an almost cylindrical morphology. Uniaxial tensile tests were carried out at room temperature on 150 specimens randomly chosen among the less hairy fibres, with diameters ranging from 40 to 140 μm. Mechanical investigations (Young modulus: 6.3–26 GPa; nominal stress at break: 140–768 MPa; nominal strain at break: ∼3%) reveal a significant disparity strongly influenced by fibre diameter, except for the nominal strain at break which remains fairly constant around 3%. These results are comparable to the upper range of the values reported for fibres extracted from BPS through alternative chemical routes or for fibres obtained from other annual plants such as jute and hemp.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Banana Pseudo–stem (BPS) is an annual renewable agricultural by–product with a potential for valorization in the production of paper, textile fibre or new bio–based materials. A gradual deconstruction process was implemented to determine BPS chemical composition and isolate sub–components that may be valorized in the formulation of bio–based polymer composites. At each step, the residues were analyzed by FTIR, X–ray diffraction and TGA–DTG. The chemical composition of the starting material (% of dry weight) was evaluated as: 13.4% total extractives, 6% pectins, 14.7% lignins, 28% hemicelluloses and 38% cellulose. The deconstruction process for BPS was efficient but led to mercerized cellulose (cellulose II) as a final residue, as assessed by the intense X–ray scattering peaks centered at 20.5° and 21.5°. Cellulose II formation was induced by the high concentration of the alkaline KOH solution used to dissolve hemicelluloses in holocellulose. The step–wise removal of non–cellulosic sub–components led to a more thermally stable residue. Long fibres were also obtained from BPS at a yield of 60%. These fibres display cellulose I structure and a thermal stability similar to the extracted cellulose. SEM analyses of long fibres showed transversal and lateral defects, the presence of surface hairiness and an almost cylindrical morphology. Uniaxial tensile tests were carried out at room temperature on 150 specimens randomly chosen among the less hairy fibres, with diameters ranging from 40 to 140 μm. Mechanical investigations (Young modulus: 6.3–26 GPa; nominal stress at break: 140–768 MPa; nominal strain at break: ∼3%) reveal a significant disparity strongly influenced by fibre diameter, except for the nominal strain at break which remains fairly constant around 3%. These results are comparable to the upper range of the values reported for fibres extracted from BPS through alternative chemical routes or for fibres obtained from other annual plants such as jute and hemp. |
2018Article de journal ER2 Auteurs : Zhao, Z; Benzerzour, Mahfoud; Abriak, Nor-Edine; Damidot, D; Courard, L; Wang, D Use of uncontaminated marine sediments in mortar and concrete by partial substitution of cement Dans: Cement and Concrete Composites, vol. 93, p. 155-162, 2018, (ACL). Liens @article{Zhao2018155,
title = {Use of uncontaminated marine sediments in mortar and concrete by partial substitution of cement},
author = {Z Zhao and Mahfoud Benzerzour and Nor-Edine Abriak and D Damidot and L Courard and D Wang},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85050107907&doi=10.1016%2fj.cemconcomp.2018.07.010&partnerID=40&md5=0048e6bd582f6ef47aaabce766671639},
doi = {10.1016/j.cemconcomp.2018.07.010},
year = {2018},
date = {2018-01-01},
journal = {Cement and Concrete Composites},
volume = {93},
pages = {155-162},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Maherzi, Walid; Benzerzour, Mahfoud; Mamindy-Pajany, Yannick; van Veen, E; Boutouil, M; Abriak, Nor-Edine Beneficial reuse of Brest-Harbor (France)-dredged sediment as alternative material in road building: laboratory investigations Dans: Environmental Technology (United Kingdom), vol. 39, no. 5, p. 566-580, 2018, (ACL). Liens @article{Maherzi2018566,
title = {Beneficial reuse of Brest-Harbor (France)-dredged sediment as alternative material in road building: laboratory investigations},
author = {Walid Maherzi and Mahfoud Benzerzour and Yannick Mamindy-Pajany and E van Veen and M Boutouil and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85017274800&doi=10.1080%2f09593330.2017.1308440&partnerID=40&md5=a3c0596a1de01bc1014fbe1c8b39b957},
doi = {10.1080/09593330.2017.1308440},
year = {2018},
date = {2018-01-01},
journal = {Environmental Technology (United Kingdom)},
volume = {39},
number = {5},
pages = {566-580},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Scribot, C; Maherzi, Walid; Benzerzour, Mahfoud; Mamindy-Pajany, Yannick; Abriak, Nor-Edine A laboratory-scale experimental investigation on the reuse of a modified red mud in ceramic materials production Dans: Construction and Building Materials, vol. 163, p. 21-31, 2018, (ACL). Liens @article{Scribot201821,
title = {A laboratory-scale experimental investigation on the reuse of a modified red mud in ceramic materials production},
author = {C Scribot and Walid Maherzi and Mahfoud Benzerzour and Yannick Mamindy-Pajany and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85038034779&doi=10.1016%2fj.conbuildmat.2017.12.092&partnerID=40&md5=45eb7de6547988d9196576474d9744da},
doi = {10.1016/j.conbuildmat.2017.12.092},
year = {2018},
date = {2018-01-01},
journal = {Construction and Building Materials},
volume = {163},
pages = {21-31},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Benzerzour, Mahfoud; Maherzi, Walid; Amar, Mouhamadou; Abriak, Nor-Edine; Damidot, D Formulation of mortars based on thermally treated sediments Dans: Journal of Material Cycles and Waste Management, vol. 20, no. 1, p. 592-603, 2018, (ACL). Liens @article{Benzerzour2018592,
title = {Formulation of mortars based on thermally treated sediments},
author = {Mahfoud Benzerzour and Walid Maherzi and Mouhamadou Amar and Nor-Edine Abriak and D Damidot},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85019878749&doi=10.1007%2fs10163-017-0626-0&partnerID=40&md5=4e13b90b034d40903f248b19a881fa11},
doi = {10.1007/s10163-017-0626-0},
year = {2018},
date = {2018-01-01},
journal = {Journal of Material Cycles and Waste Management},
volume = {20},
number = {1},
pages = {592-603},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Trincal, V; Thiéry, Vincent; Mamindy-Pajany, Yannick; Hillier, S Use of hydraulic binders for reducing sulphate leaching: application to gypsiferous soil sampled in Ile-de-France region (France) Dans: Environmental Science and Pollution Research, 2018, ISSN: 16147499. Résumé | Liens @article{Trincal2018,
title = {Use of hydraulic binders for reducing sulphate leaching: application to gypsiferous soil sampled in Ile-de-France region (France)},
author = {V Trincal and Vincent Thiéry and Yannick Mamindy-Pajany and S Hillier},
doi = {10.1007/s11356-018-2376-5},
issn = {16147499},
year = {2018},
date = {2018-01-01},
journal = {Environmental Science and Pollution Research},
abstract = {textcopyright 2018 Springer-Verlag GmbH Germany, part of Springer Nature Polluted soils are a serious environmental risk worldwide and consist of millions of tons of mineral waste to be treated. In order to ensure their sustainable management, various remediation options must be considered. Hydraulic binder treatment is one option that may allow a stabilisation of pollution and thus offer a valorisation as secondary raw materials rather than considering them as waste. In this study, we focused on sulphate-polluted soil and tested the effectiveness of several experimental hydraulic binders. The aim was to transform gypsum into ettringite, a much less soluble sulphate, and therefore to restrict the potential for sulphate pollutant release. The environmental assessment of five formulations using hydraulic binders was compared to the gypsiferous soil before treatment (contaminated in sulphate). The approach was to combine leaching tests with mineralogical quantifications using among others thermogravimetric and XRD methods. In the original soil and in the five formulations, leaching tests indicate sulphate release above environmental standards. However, hydraulic binders promote ettringite formation, as well as a gypsum content reduction as observed by SEM. The stabilisation of sulphates is, however, insufficient, probably as a result of the very high content of gypsum in the unusual soil used. The mineralogical reactions highlighted during the hydration of hydraulic binders are promising; they could pave the way for the development of new industrial mixtures that would have a positive environmental impact by allowing reuse of soils that would otherwise be classified as waste.},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
textcopyright 2018 Springer-Verlag GmbH Germany, part of Springer Nature Polluted soils are a serious environmental risk worldwide and consist of millions of tons of mineral waste to be treated. In order to ensure their sustainable management, various remediation options must be considered. Hydraulic binder treatment is one option that may allow a stabilisation of pollution and thus offer a valorisation as secondary raw materials rather than considering them as waste. In this study, we focused on sulphate-polluted soil and tested the effectiveness of several experimental hydraulic binders. The aim was to transform gypsum into ettringite, a much less soluble sulphate, and therefore to restrict the potential for sulphate pollutant release. The environmental assessment of five formulations using hydraulic binders was compared to the gypsiferous soil before treatment (contaminated in sulphate). The approach was to combine leaching tests with mineralogical quantifications using among others thermogravimetric and XRD methods. In the original soil and in the five formulations, leaching tests indicate sulphate release above environmental standards. However, hydraulic binders promote ettringite formation, as well as a gypsum content reduction as observed by SEM. The stabilisation of sulphates is, however, insufficient, probably as a result of the very high content of gypsum in the unusual soil used. The mineralogical reactions highlighted during the hydration of hydraulic binders are promising; they could pave the way for the development of new industrial mixtures that would have a positive environmental impact by allowing reuse of soils that would otherwise be classified as waste. |
2018Article de journal ER2 Auteurs : Bourdot, A; Thiéry, Vincent; Bulteel, David; Cuchet, S; Hammerschlag, J -G Alkali-reactivity of a Swiss siliceous limestone caused by finely dispersed quartz Dans: Cement and Concrete Composites, vol. 91, 2018, ISSN: 09589465. Résumé | Liens @article{Bourdot2018,
title = {Alkali-reactivity of a Swiss siliceous limestone caused by finely dispersed quartz},
author = {A Bourdot and Vincent Thiéry and David Bulteel and S Cuchet and J -G Hammerschlag},
doi = {10.1016/j.cemconcomp.2018.04.016},
issn = {09589465},
year = {2018},
date = {2018-01-01},
journal = {Cement and Concrete Composites},
volume = {91},
abstract = {textcopyright 2018 Elsevier Ltd The present study was conducted to provide a better understanding of the alkali-silica reactivity (ASR) of siliceous limestones in concrete applications. A Swiss siliceous limestone, which is potentially reactive, was subjected to a series of tests. Microbar tests were first conducted to classify the limestones reactivity with respect to ASR. Two other methods were then used to characterize the amount of SiO 2 present. First, an analysis of the chemical composition with petrographic and mineralogical characterizations was carried out, and second, a model reactor was used to characterize the silica reactivity. The results showed a siliceous reactive limestone. In petrography, three main types of carbonate lithology were outlined according to their SiO 2 and glauconitic content. The emphasis was placed on the types of SiO 2 and their sizes: a finely dispersed micro- to crypto-quartz has been highlighted by SEM and TEM, and analysed as quartz. The reactive free SiO 2 content, obtained by a mineralogical calculating method, completes the petrographic results. The proportion of reactive free SiO 2 could be essentially attributed to the presence of finely dispersed micro- to crypto-quartz from TEM observations which is probably very reactive towards the ASR due to its small-size. The presence of finely dispersed micro- to crypto-quartz is important to consider, due to its potential effects on the concrete mixture. The grain size of SiO 2 seems to be a supplementary key parameter, in addition to crystallinity and strain, since it can promote ASR development with some siliceous aggregates.},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
textcopyright 2018 Elsevier Ltd The present study was conducted to provide a better understanding of the alkali-silica reactivity (ASR) of siliceous limestones in concrete applications. A Swiss siliceous limestone, which is potentially reactive, was subjected to a series of tests. Microbar tests were first conducted to classify the limestones reactivity with respect to ASR. Two other methods were then used to characterize the amount of SiO 2 present. First, an analysis of the chemical composition with petrographic and mineralogical characterizations was carried out, and second, a model reactor was used to characterize the silica reactivity. The results showed a siliceous reactive limestone. In petrography, three main types of carbonate lithology were outlined according to their SiO 2 and glauconitic content. The emphasis was placed on the types of SiO 2 and their sizes: a finely dispersed micro- to crypto-quartz has been highlighted by SEM and TEM, and analysed as quartz. The reactive free SiO 2 content, obtained by a mineralogical calculating method, completes the petrographic results. The proportion of reactive free SiO 2 could be essentially attributed to the presence of finely dispersed micro- to crypto-quartz from TEM observations which is probably very reactive towards the ASR due to its small-size. The presence of finely dispersed micro- to crypto-quartz is important to consider, due to its potential effects on the concrete mixture. The grain size of SiO 2 seems to be a supplementary key parameter, in addition to crystallinity and strain, since it can promote ASR development with some siliceous aggregates. |
2018Article de journal ER2 Auteurs : Maimouni, H; Remond, S; Huchet, F; Richard, P; Thiéry, Vincent; Descantes, Y Quantitative assessment of the saturation degree of model fine recycled concrete aggregates immersed in a filler or cement paste Dans: Construction and Building Materials, vol. 175, 2018, ISSN: 09500618. Résumé | Liens @article{Maimouni2018,
title = {Quantitative assessment of the saturation degree of model fine recycled concrete aggregates immersed in a filler or cement paste},
author = {H Maimouni and S Remond and F Huchet and P Richard and Vincent Thiéry and Y Descantes},
doi = {10.1016/j.conbuildmat.2018.04.211},
issn = {09500618},
year = {2018},
date = {2018-01-01},
journal = {Construction and Building Materials},
volume = {175},
abstract = {textcopyright 2018 We study water transfer between different model fine recycled concrete aggregates and fresh filler or cement paste in which they are immersed. Our aim is to introduce a spread based experimental protocol for studying the time evolution of water content in initially dry aggregates when mixed with such pastes. The procedure developed hereby is tested on three model Cement Paste Sands (CPS) prepared with different water-to-cement ratios leading to very different porosities and pore structures. The results show that water content in the CPS reaches a maximum no later than 6 min after first contact with limestone filler or cement paste then remains fairly constant afterwards. The saturation degree, i.e. ratio of the water content in the CPS to their water absorption, increases with the porosity of the CPS and remains less than one whatever the paste. The corresponding reduction of water absorption capacity in a cement paste should be taken into account during mix design of a recycled concrete.},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
textcopyright 2018 We study water transfer between different model fine recycled concrete aggregates and fresh filler or cement paste in which they are immersed. Our aim is to introduce a spread based experimental protocol for studying the time evolution of water content in initially dry aggregates when mixed with such pastes. The procedure developed hereby is tested on three model Cement Paste Sands (CPS) prepared with different water-to-cement ratios leading to very different porosities and pore structures. The results show that water content in the CPS reaches a maximum no later than 6 min after first contact with limestone filler or cement paste then remains fairly constant afterwards. The saturation degree, i.e. ratio of the water content in the CPS to their water absorption, increases with the porosity of the CPS and remains less than one whatever the paste. The corresponding reduction of water absorption capacity in a cement paste should be taken into account during mix design of a recycled concrete. |
2018Chapitre d'ouvrage ER2 Auteurs : Kruszewski, Łukasz; Gatel, Pierre; Thiéry, Vincent; Moszumańska, Izabela; Kusy, Danuta Crystallochemical Behavior of Slag Minerals and the Occurrence of Potentially New Mineral Species From Lapanouse-de-Sévérac, France Dans: Coal and Peat Fires: A Global Perspective, p. 243–300, 2018, (OS). Liens @inbook{inbook,
title = {Crystallochemical Behavior of Slag Minerals and the Occurrence of Potentially New Mineral Species From Lapanouse-de-Sévérac, France},
author = {Łukasz Kruszewski and Pierre Gatel and Vincent Thiéry and Izabela Moszumańska and Danuta Kusy},
doi = {10.1016/B978-0-12-849885-9.00013-5},
year = {2018},
date = {2018-01-01},
booktitle = {Coal and Peat Fires: A Global Perspective},
pages = {243--300},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {inbook}
}
|
2018Chapitre d'ouvrage ER2 Auteurs : Thiéry, Vincent; Guy, B; Kruszewski, Ł; Carpentier, J F The burning coal heap at La Ricamarie, Loire Coal Basin, France Dans: Stracher, G B (Ed.): Coal and Peat Fires: A Global Perspective. Volume 5 : case studies - advances in field and laboratory research, p. 301–331, 2018, (OS). @inbook{Thiery2018,
title = {The burning coal heap at La Ricamarie, Loire Coal Basin, France},
author = {Vincent Thiéry and B Guy and Ł Kruszewski and J F Carpentier},
editor = {G B Stracher},
year = {2018},
date = {2018-01-01},
booktitle = {Coal and Peat Fires: A Global Perspective. Volume 5 : case studies - advances in field and laboratory research},
pages = {301--331},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {inbook}
}
|
2018Article de journal ER2 Auteurs : Wang, D; Zentar, Rachid; Abriak, Nor-Edine; Di, S Long-term mechanical performance of marine sediments solidified with cement, lime, and fly ash Dans: Marine Georesources & …, vol. 36, p. 123-130, 2018, (ACL). Liens @article{Wang2018,
title = {Long-term mechanical performance of marine sediments solidified with cement, lime, and fly ash},
author = {D Wang and Rachid Zentar and Nor-Edine Abriak and S Di},
url = {https://www.tandfonline.com/doi/abs/10.1080/1064119X.2017.1320600},
doi = {https://doi.org/10.1080/1064119X.2017.1320600},
year = {2018},
date = {2018-01-01},
journal = {Marine Georesources & …},
volume = {36},
pages = {123-130},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Djafari, D; Mekerta, B; Zentar, Rachid; ..., Sludge of WWTPs, from waste family to sustainable development Dans: African Review of …, vol. 3, no. 1, p. 1-6, 2018, (ACL). Liens @article{Djafari2018,
title = {Sludge of WWTPs, from waste family to sustainable development},
author = {D Djafari and B Mekerta and Rachid Zentar and ...},
url = {http://rastd.univ-adrar.dz/index.php/RASTD/article/view/89},
year = {2018},
date = {2018-01-01},
journal = {African Review of …},
volume = {3},
number = {1},
pages = {1-6},
publisher = {rastd.univ-adrar.dz},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Khoury, Eliane; Ambrós, Weslei; Cazacliu, Bogdan; Sampaio, Carlos-Hoffmann; Remond, Sébastien Heterogeneity of recycled concrete aggregates, an intrinsic variability Dans: Construction and Building Materials, vol. 175, p. 705 - 713, 2018, ISSN: 0950-0618, (ACL). Résumé | Liens @article{KHOURY2018705,
title = {Heterogeneity of recycled concrete aggregates, an intrinsic variability},
author = {Eliane Khoury and Weslei Ambrós and Bogdan Cazacliu and Carlos-Hoffmann Sampaio and Sébastien Remond},
url = {http://www.sciencedirect.com/science/article/pii/S0950061818309760},
doi = {https://doi.org/10.1016/j.conbuildmat.2018.04.163},
issn = {0950-0618},
year = {2018},
date = {2018-01-01},
journal = {Construction and Building Materials},
volume = {175},
pages = {705 - 713},
abstract = {Recycled concrete aggregates (RCA) are composed of two different materials: natural aggregate and attached cement paste. It is generally admitted that finer the RCA greater is the quantity of adhered cement paste. In this study it is shown that for a given granular class, very large disparities may be present in the adhered cement paste content, which could generate dispersion of the results of characterization tests of RCA. The heterogeneity of a narrow granular class of coarse RCA (6.3/10 mm) was investigated by sorting samples according to their densities using a water jig. The water jig sorting was essentially a separation by density and not by size. It was shown that the average water absorption after an immersion in water during 24 h was about 5% for a representative sample of the feed RCA, before sorting tests, while for the homogenous specimens separated by density, the water absorption ranged from 2% to 9%. The distribution of the water absorption in a sample of 120 kg of RCA was well estimated by a log-normal distribution. This intrinsic heterogeneity of RCA implies being able to have representative samples with sufficient accuracy, not only concerning the size but also the mineral composition of grains in the stockpiles of RCA. So, after discussing the results of this study, water jig appeared to be an efficient tool to separate RCA and obtain representative samples for their characterization.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Recycled concrete aggregates (RCA) are composed of two different materials: natural aggregate and attached cement paste. It is generally admitted that finer the RCA greater is the quantity of adhered cement paste. In this study it is shown that for a given granular class, very large disparities may be present in the adhered cement paste content, which could generate dispersion of the results of characterization tests of RCA. The heterogeneity of a narrow granular class of coarse RCA (6.3/10 mm) was investigated by sorting samples according to their densities using a water jig. The water jig sorting was essentially a separation by density and not by size. It was shown that the average water absorption after an immersion in water during 24 h was about 5% for a representative sample of the feed RCA, before sorting tests, while for the homogenous specimens separated by density, the water absorption ranged from 2% to 9%. The distribution of the water absorption in a sample of 120 kg of RCA was well estimated by a log-normal distribution. This intrinsic heterogeneity of RCA implies being able to have representative samples with sufficient accuracy, not only concerning the size but also the mineral composition of grains in the stockpiles of RCA. So, after discussing the results of this study, water jig appeared to be an efficient tool to separate RCA and obtain representative samples for their characterization. |
2018Article de journal ER2 Auteurs : Hamouche, F; Zentar, Rachid Effects of organic matter on physical properties of dredged marine sediments Dans: Waste and Biomass Valorization, 2018, (ACL). Liens @article{Hamouche2018,
title = {Effects of organic matter on physical properties of dredged marine sediments},
author = {F Hamouche and Rachid Zentar},
url = {https://link.springer.com/article/10.1007/s12649-018-0387-6},
doi = {https://doi.org/10.1007/s12649-018-0387-6},
year = {2018},
date = {2018-01-01},
journal = {Waste and Biomass Valorization},
publisher = {Springer},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Article de journal ER2 Auteurs : Driss, D; Zentar, Rachid; Belkacem, M; ..., Sludge wastewater treatment plants a raw mater to produce a green-cement Dans: REVISTA INTERNACIONAL DE CONTAMINACION AMBIENTAL, 2018, ISSN: 0188-4999, (ACL). @article{Driss2018,
title = {Sludge wastewater treatment plants a raw mater to produce a green-cement},
author = {D Driss and Rachid Zentar and M Belkacem and ...},
issn = {0188-4999},
year = {2018},
date = {2018-01-01},
journal = {REVISTA INTERNACIONAL DE CONTAMINACION AMBIENTAL},
publisher = {CENTRO CIENCIAS ATMOSFERA …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Thèse ER2 Auteurs : Khoury, Eliane Maîtrise de l’eau efficace dans les bétons de granulats recyclés IFSTTAR / IMT Lille Douai, 2018, (TH). Liens @phdthesis{Khoury2018b,
title = {Maîtrise de l’eau efficace dans les bétons de granulats recyclés},
author = {Eliane Khoury},
url = {http://www.theses.fr/2018MTLD0011},
year = {2018},
date = {2018-01-01},
school = {IFSTTAR / IMT Lille Douai},
note = {TH},
keywords = {ER2},
pubstate = {published},
tppubtype = {phdthesis}
}
|
2018Conférence ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sébastien Water migration during mixing recycled aggregate concrete RILEM, IV International Conference Progress of Recycling in the Built Environment , Lisbon, Portugal, 2018, (ACTI, ACTN, AFF, COM, INV). @conference{Khoury2018c,
title = {Water migration during mixing recycled aggregate concrete},
author = {Eliane Khoury and Bogdan Cazacliu and Sébastien Remond},
year = {2018},
date = {2018-01-01},
booktitle = {RILEM, IV International Conference Progress of Recycling in the Built Environment , Lisbon, Portugal},
note = {ACTI, ACTN, AFF, COM, INV},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Article de journal ER2 Auteurs : Hamouche, F; Zentar, Rachid The relationship between organic matter content and the immediate bearing index of dredged sediments Dans: REVISTA INTERNACIONAL DE CONTAMINACION AMBIENTAL, 2018, (ACL). @article{HamoucheF.2018,
title = {The relationship between organic matter content and the immediate bearing index of dredged sediments},
author = {F Hamouche and Rachid Zentar},
year = {2018},
date = {2018-01-01},
journal = {REVISTA INTERNACIONAL DE CONTAMINACION AMBIENTAL},
publisher = {CENTRO CIENCIAS ATMOSFERA …},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2018Conférence ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sébastien Evolution de l’eau efficace lors du malaxage du béton de granulats recyclés 37èmes rencontres universitaires de Génie Civil de AUGC, 2018, (ACTI, ACTN, AFF, COM, INV). @conference{Khoury2018a,
title = {Evolution de l’eau efficace lors du malaxage du béton de granulats recyclés},
author = {Eliane Khoury and Bogdan Cazacliu and Sébastien Remond},
year = {2018},
date = {2018-01-01},
booktitle = {37èmes rencontres universitaires de Génie Civil de AUGC},
note = {ACTI, ACTN, AFF, COM, INV},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sébastien Influence d’Absorption d'Eau des GBR sur l’Eau Efficace des Bétons Recyclés 36èmes rencontres universitaires de Génie Civil de AUGC, 2018, (ACTI, ACTN, AFF, COM, INV). @conference{Khoury2017c,
title = {Influence d’Absorption d'Eau des GBR sur l’Eau Efficace des Bétons Recyclés},
author = {Eliane Khoury and Bogdan Cazacliu and Sébastien Remond},
year = {2018},
date = {2018-01-01},
booktitle = {36èmes rencontres universitaires de Génie Civil de AUGC},
note = {ACTI, ACTN, AFF, COM, INV},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sébastien Caractérisation de l’Hétérogénéité des Granulats de Béton Recyclés 36èmes rencontres universitaires de Génie Civil de AUGC, 2018, (ACTI, ACTN, AFF, COM, INV). @conference{Khoury2018cb,
title = {Caractérisation de l’Hétérogénéité des Granulats de Béton Recyclés},
author = {Eliane Khoury and Bogdan Cazacliu and Sébastien Remond},
year = {2018},
date = {2018-01-01},
booktitle = {36èmes rencontres universitaires de Génie Civil de AUGC},
note = {ACTI, ACTN, AFF, COM, INV},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Article de journal ER2 Auteurs : Alhaik, Ghaith; Dubois, Vincent; Wirquin, Eric; Leblanc, Alexandre; Aouad, Georges Evaluate the influence of starch on earth/hemp or flax straws mixtures properties in presence of superplasticizer Dans: Construction and Building Materials, vol. 186, p. 762 - 772, 2018, ISSN: 0950-0618. Résumé | Liens @article{ALHAIK2018762,
title = {Evaluate the influence of starch on earth/hemp or flax straws mixtures properties in presence of superplasticizer},
author = {Ghaith Alhaik and Vincent Dubois and Eric Wirquin and Alexandre Leblanc and Georges Aouad},
url = {http://www.sciencedirect.com/science/article/pii/S095006181831883X},
doi = {https://doi.org/10.1016/j.conbuildmat.2018.07.209},
issn = {0950-0618},
year = {2018},
date = {2018-01-01},
journal = {Construction and Building Materials},
volume = {186},
pages = {762 - 772},
abstract = {In this paper, we study the influence of two types of starch on earth hemp or flax straw mixtures at fresh and hardened states. The main goal is to propose new non-load bearing earthen for indoor. The mass percentage of starch/binder (S/B) in mixtures was fixed at 1% of mass. The VEBE consistometer test has been used to fix a similar consistency between mixtures. The targeted workability has to allow an easy introduction of materials in the moulds. Adding both of starch has shown a positive effect on mixtures workability at the fresh state and mechanical resistances at the hardened state. At hardened state, mechanical and thermal-acoustic performances have been measured on laboratory samples and blocks at real scale. Results have shown a significant effect of starch on mechanical strengths.},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
In this paper, we study the influence of two types of starch on earth hemp or flax straw mixtures at fresh and hardened states. The main goal is to propose new non-load bearing earthen for indoor. The mass percentage of starch/binder (S/B) in mixtures was fixed at 1% of mass. The VEBE consistometer test has been used to fix a similar consistency between mixtures. The targeted workability has to allow an easy introduction of materials in the moulds. Adding both of starch has shown a positive effect on mixtures workability at the fresh state and mechanical resistances at the hardened state. At hardened state, mechanical and thermal-acoustic performances have been measured on laboratory samples and blocks at real scale. Results have shown a significant effect of starch on mechanical strengths. |
2018Article de journal ER2 Auteurs : Dubois, Vincent; Leblanc, Alexandre; Carpentier, Olivier; Alhaik, G; Wirquin, Eric Performances of flax shive-based lightweight composites with rapid hardening Dans: Construction and Building Materials, vol. 165, p. 17 - 27, 2018, ISSN: 0950-0618. Résumé | Liens @article{DUBOIS201817,
title = {Performances of flax shive-based lightweight composites with rapid hardening},
author = {Vincent Dubois and Alexandre Leblanc and Olivier Carpentier and G Alhaik and Eric Wirquin},
url = {http://www.sciencedirect.com/science/article/pii/S0950061817326442},
doi = {https://doi.org/10.1016/j.conbuildmat.2017.12.239},
issn = {0950-0618},
year = {2018},
date = {2018-01-01},
journal = {Construction and Building Materials},
volume = {165},
pages = {17 - 27},
abstract = {This research work aims to develop a rapid hardening lightweight composite including flax shives, foaming agent and earthern materials. The results show a satisfying workability just after the mixing step and a rapid hardening of about less than thirty minutes. The mixes with a large amount of flax shives show a thermal conductivity inferior to 0.1 W.m−1.K−1 and porous-like acoustic absorption coefficients. Even if the mechanical performances are low (fc28days = 0.1–1 MPa), the developed mixes, in association with a structural material, can be used with advantage the 3D printing technique.},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
This research work aims to develop a rapid hardening lightweight composite including flax shives, foaming agent and earthern materials. The results show a satisfying workability just after the mixing step and a rapid hardening of about less than thirty minutes. The mixes with a large amount of flax shives show a thermal conductivity inferior to 0.1 W.m−1.K−1 and porous-like acoustic absorption coefficients. Even if the mechanical performances are low (fc28days = 0.1–1 MPa), the developed mixes, in association with a structural material, can be used with advantage the 3D printing technique. |
2018Ouvrage ER2 Auteurs : Chabannes, Morgan; Garcia-Diaz, Eric; Clerc, Laurent; Bénézet, Jean-Charles; Becquart, Frédéric Lime-Hemp and Rice Husk-Based Concretes for Building Envelopes Springer International Publishing, 2018, (OS). @book{CHAB2018O,
title = {Lime-Hemp and Rice Husk-Based Concretes for Building Envelopes},
author = {Morgan Chabannes and Eric Garcia-Diaz and Laurent Clerc and Jean-Charles Bénézet and Frédéric Becquart},
year = {2018},
date = {2018-01-01},
publisher = {Springer International Publishing},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {book}
}
|
2018Conférence ER2 Auteurs : Dubois, Vincent; Carpentier, Olivier; D'haese, Romain; Chafei, Sawsen; Wirquin, Eric IMPRESSION 3D POUR PAROI COMPOSITE À BASE DE TERRE ET DE LIN FIBRA Innovation – Congrès International de la Construction Biosourcée, 2018, (AFF). @conference{,
title = {IMPRESSION 3D POUR PAROI COMPOSITE À BASE DE TERRE ET DE LIN},
author = {Vincent Dubois and Olivier Carpentier and Romain D'haese and Sawsen Chafei and Eric Wirquin},
year = {2018},
date = {2018-01-01},
booktitle = {FIBRA Innovation – Congrès International de la Construction Biosourcée},
note = {AFF},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2018Article de journal ER2 Auteurs : Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine; Safhi, Amine El Mahdi Durability of a cementitious matrix based on treated sediments Dans: Case Studies in Construction Materials, vol. 8, p. 258 - 276, 2018, ISSN: 2214-5095, (ACL). Résumé | Liens @article{AMAR2018258,
title = {Durability of a cementitious matrix based on treated sediments},
author = {Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak and Amine El Mahdi Safhi},
url = {http://www.sciencedirect.com/science/article/pii/S221450951730164X},
doi = {https://doi.org/10.1016/j.cscm.2018.01.007},
issn = {2214-5095},
year = {2018},
date = {2018-01-01},
journal = {Case Studies in Construction Materials},
volume = {8},
pages = {258 - 276},
abstract = {Significant volumes of sediment are annually dredged in France and all over the world and these materials may in fact be used beneficially as supplementary cementitious material. This paper studies the durability of a new cement matrix based on dredged marine sediment from the Dunkirk-Harbour (northern France). Several techniques are used to characterise the raw sediment, such as physical properties, chemical analyses and mineralogy. X-Ray Diffraction (XRD) analysis revealed quartz, calcite and kaolinite to be the main mineral phases. In order to eliminate organic matter and activate some of those minerals, the sediment is calcined at a temperature of 850 °C for 1 h. Moreover, four blended mortars were formulated by mixing a portland cement (CEM I 52,5 N) and the calcined sediment as a partial cement substitute (0%, 10%, 20% and 30%). Reference mortars, based on the blended cement, were then prepared. This re-use cannot be substantiated or efficient without a durability study. For this purpose, the following tests were conducted on those mortars: mercury porosity, accessible water porosity, chloride permeability, freezing and thawing, external sulphate attack, alkali aggregates reaction, compressive and bending strength tests. The results of most of those tests evidenced the fact that the mortar that contains 10% of the treated sediment is as efficient and durable as the reference mortar itself. This infers that the presence of these calcined sediments improves the general behaviour of mortar.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Significant volumes of sediment are annually dredged in France and all over the world and these materials may in fact be used beneficially as supplementary cementitious material. This paper studies the durability of a new cement matrix based on dredged marine sediment from the Dunkirk-Harbour (northern France). Several techniques are used to characterise the raw sediment, such as physical properties, chemical analyses and mineralogy. X-Ray Diffraction (XRD) analysis revealed quartz, calcite and kaolinite to be the main mineral phases. In order to eliminate organic matter and activate some of those minerals, the sediment is calcined at a temperature of 850 °C for 1 h. Moreover, four blended mortars were formulated by mixing a portland cement (CEM I 52,5 N) and the calcined sediment as a partial cement substitute (0%, 10%, 20% and 30%). Reference mortars, based on the blended cement, were then prepared. This re-use cannot be substantiated or efficient without a durability study. For this purpose, the following tests were conducted on those mortars: mercury porosity, accessible water porosity, chloride permeability, freezing and thawing, external sulphate attack, alkali aggregates reaction, compressive and bending strength tests. The results of most of those tests evidenced the fact that the mortar that contains 10% of the treated sediment is as efficient and durable as the reference mortar itself. This infers that the presence of these calcined sediments improves the general behaviour of mortar. |
2018Article de journal ER2 Auteurs : Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine Towards the establishment of formulation laws for sediment-based mortars Dans: Journal of Building Engineering, vol. 16, p. 106 - 117, 2018, ISSN: 2352-7102, (ACL). Résumé | Liens @article{AMAR2018106,
title = {Towards the establishment of formulation laws for sediment-based mortars},
author = {Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {http://www.sciencedirect.com/science/article/pii/S2352710217302802},
doi = {https://doi.org/10.1016/j.jobe.2017.12.011},
issn = {2352-7102},
year = {2018},
date = {2018-01-01},
journal = {Journal of Building Engineering},
volume = {16},
pages = {106 - 117},
abstract = {The 21st century marks a remarkable stage of a widespread awareness for environmental protection and the preservation of natural resources. In this context, the beneficial use of dredged sediments as building materials really fits with this aim. There is currently no objective method for the formulation and strength prediction of sediment-based mortars. The consequence is that the results can be very variable and the test conditions are difficult to reproduce. The monitoring method in this study involves formulating mortars with water/binder (w/b) ratios defined by: w/b = 0.4; w/b = 0.5; w/b = 0.6; w/b = 0.7 and w/b = 0.8. For each given w/b ratio, mortars contain increasing amounts of sediment in partial substitution to cement (p = 0%; 5%; 8%, 10%; 15%; 20%; 25%). By investigating the compressive strength of these mortars after 7, 28 and 60 days maturation, objective and comprehensive models for the prediction of compressive strength of sediment-based mortars are proposed.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The 21st century marks a remarkable stage of a widespread awareness for environmental protection and the preservation of natural resources. In this context, the beneficial use of dredged sediments as building materials really fits with this aim. There is currently no objective method for the formulation and strength prediction of sediment-based mortars. The consequence is that the results can be very variable and the test conditions are difficult to reproduce. The monitoring method in this study involves formulating mortars with water/binder (w/b) ratios defined by: w/b = 0.4; w/b = 0.5; w/b = 0.6; w/b = 0.7 and w/b = 0.8. For each given w/b ratio, mortars contain increasing amounts of sediment in partial substitution to cement (p = 0%; 5%; 8%, 10%; 15%; 20%; 25%). By investigating the compressive strength of these mortars after 7, 28 and 60 days maturation, objective and comprehensive models for the prediction of compressive strength of sediment-based mortars are proposed. |
2017Article de journal ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sebastien Impact of the initial moisture level and pre-wetting history of recycled concrete aggregates on their water absorption Dans: Materials and Structures, vol. 50, no. 5, 2017, (ACL). Liens @article{Khoury2017,
title = {Impact of the initial moisture level and pre-wetting history of recycled concrete aggregates on their water absorption},
author = {Eliane Khoury and Bogdan Cazacliu and Sebastien Remond},
doi = {10.1617/s11527-017-1093-8},
year = {2017},
date = {2017-10-01},
journal = {Materials and Structures},
volume = {50},
number = {5},
publisher = {Springer Science and Business Media LLC},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2017Conférence ER2 Auteurs : Boussatour, G; Cresson, P -Y; Genestie, Benoit; Joly, N; Lasri, T Characterization of biodegradable and biosourced polylactic acid (PLA) substrate in a wide frequency range (0,5-26 GHz) vol. 2018-January, 2017, (cited By 4). Liens @conference{Boussatour20181,
title = {Characterization of biodegradable and biosourced polylactic acid (PLA) substrate in a wide frequency range (0,5-26 GHz)},
author = {G Boussatour and P -Y Cresson and Benoit Genestie and N Joly and T Lasri},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85045876436&doi=10.1109%2fIMWS-AMP.2017.8247428&partnerID=40&md5=7ca354efa7f239e126719a16c636f4b9},
doi = {10.1109/IMWS-AMP.2017.8247428},
year = {2017},
date = {2017-09-20},
urldate = {2018-01-01},
journal = {2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications, IMWS-AMP 2017},
volume = {2018-January},
pages = {1-3},
note = {cited By 4},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2017Article de journal ER2 Auteurs : Vanmarcke, Audrey; Leroy, Lise; Stoclet, Gregory; Duchatel-Crépy, Lucie; Lefebvre, Jean-Marc; Joly, Nicolas; Gaucher, Valérie Influence of fatty chain length and starch composition on structure and properties of fully substituted fatty acid starch esters Dans: Carbohydrate Polymers, vol. 164, p. 249 - 257, 2017, ISSN: 0144-8617, (ACL). Résumé | Liens @article{VANMARCKE2017249,
title = {Influence of fatty chain length and starch composition on structure and properties of fully substituted fatty acid starch esters},
author = {Audrey Vanmarcke and Lise Leroy and Gregory Stoclet and Lucie Duchatel-Crépy and Jean-Marc Lefebvre and Nicolas Joly and Valérie Gaucher},
url = {http://www.sciencedirect.com/science/article/pii/S0144861717301339},
doi = {https://doi.org/10.1016/j.carbpol.2017.02.013},
issn = {0144-8617},
year = {2017},
date = {2017-01-01},
journal = {Carbohydrate Polymers},
volume = {164},
pages = {249 - 257},
abstract = {A series of almost fully substituted Fatty Acid Starch Esters (FASEs) has been obtained in a homogeneous LiCl/DMAc medium by grafting octanoyl (C8), lauroyl (C12) and palmitoyl (C16) chlorides onto 3 starch species: Amylo-Maize, Potato and Waxy Maize. Structure-property relationships of FASEs are investigated as a function of both fatty acid chain length and amylose/amylopectin ratio of the starch. The structural study has revealed a layered type organization in which starch chain planes are separated by fatty chains. The latter are interpenetrated and/or tilted for FASE-C16 whatever the origin of the starch is, and fatty chains partially crystallizes into a structure with hexagonal symmetry. FASEs with C8 and C12 side chains are totally amorphous. The mechanical behavior of FASEs is shown to depend on both side chain length and amylose/amylopectin ratio, and an increase in material ductility is observed at increasing amylose content for C8 and C12 side chains.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
A series of almost fully substituted Fatty Acid Starch Esters (FASEs) has been obtained in a homogeneous LiCl/DMAc medium by grafting octanoyl (C8), lauroyl (C12) and palmitoyl (C16) chlorides onto 3 starch species: Amylo-Maize, Potato and Waxy Maize. Structure-property relationships of FASEs are investigated as a function of both fatty acid chain length and amylose/amylopectin ratio of the starch. The structural study has revealed a layered type organization in which starch chain planes are separated by fatty chains. The latter are interpenetrated and/or tilted for FASE-C16 whatever the origin of the starch is, and fatty chains partially crystallizes into a structure with hexagonal symmetry. FASEs with C8 and C12 side chains are totally amorphous. The mechanical behavior of FASEs is shown to depend on both side chain length and amylose/amylopectin ratio, and an increase in material ductility is observed at increasing amylose content for C8 and C12 side chains. |
2017Article de journal ER2 Auteurs : Pana, Ana-Maria; Popa, Marcel; Silion, Mihaela; Sfirloaga, Paula; Bandur, Geza; Duchatel-Crépy, Lucie Novel semi-interpenetrating network hydrogels based on monosaccharide oligomers with itaconic moiety: synthesis and properties Dans: Iranian Polymer Journal, vol. 26, no. 10, p. 1 - 9, 2017, (ACL). Résumé | Liens @article{PANA20171,
title = {Novel semi-interpenetrating network hydrogels based on monosaccharide oligomers with itaconic moiety: synthesis and properties},
author = {Ana-Maria Pana and Marcel Popa and Mihaela Silion and Paula Sfirloaga and Geza Bandur and Lucie Duchatel-Crépy},
doi = {DOI: 10.1007/s13726-017-0559-4},
year = {2017},
date = {2017-01-01},
journal = {Iranian Polymer Journal},
volume = {26},
number = {10},
pages = {1 - 9},
abstract = {Hydrogel-based drug delivery systems encounter great scientific attention nowadays. Semi-interpenetrating network systems with hydrogel features have been studied as potential drug carriers due to their water intake capacity, biocompatibility and biodegradability. One of the most important features of drug delivery systems is biocompatibility and as such materials derived from natural resources seem to be more appropriate to act as excipients. In this respect, two new semi-interpenetrating networks (semi-IPNs) with hydrogel features based on chitosan, two novel oligomers derived from monosaccharides and 2-hydroxyethylmethacrylate (HEMA) have been synthesized and characterized using FTIR, thermogravimetry, SEM/EDX and swelling behavior. The new sugar-derived oligomers (GI and MI) with double bonds available for further polymerization were obtained by polycondensation of 1,3-propanediol with dicarboxylic acids derived from glucose/mannose skeleton with itaconic anhydride moieties. GI and MI oligomers were characterized by FTIR, NMR spectroscopy and ESI–MS spectrometry, which showed molecular weights of about 7000 Da and linear polymerization chain structure. The new semi-IPNs show good thermal behavior and these hydrogels display a swelling tendency by loading significantly more water in an acid environment than in a neutral solution. Moreover, these superabsorbent hydrogels are able to load significant amount of hydrosoluble active principle (herein the antibiotic levofloxacin) and their releasing profile is marked by an important “burst effect”.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Hydrogel-based drug delivery systems encounter great scientific attention nowadays. Semi-interpenetrating network systems with hydrogel features have been studied as potential drug carriers due to their water intake capacity, biocompatibility and biodegradability. One of the most important features of drug delivery systems is biocompatibility and as such materials derived from natural resources seem to be more appropriate to act as excipients. In this respect, two new semi-interpenetrating networks (semi-IPNs) with hydrogel features based on chitosan, two novel oligomers derived from monosaccharides and 2-hydroxyethylmethacrylate (HEMA) have been synthesized and characterized using FTIR, thermogravimetry, SEM/EDX and swelling behavior. The new sugar-derived oligomers (GI and MI) with double bonds available for further polymerization were obtained by polycondensation of 1,3-propanediol with dicarboxylic acids derived from glucose/mannose skeleton with itaconic anhydride moieties. GI and MI oligomers were characterized by FTIR, NMR spectroscopy and ESI–MS spectrometry, which showed molecular weights of about 7000 Da and linear polymerization chain structure. The new semi-IPNs show good thermal behavior and these hydrogels display a swelling tendency by loading significantly more water in an acid environment than in a neutral solution. Moreover, these superabsorbent hydrogels are able to load significant amount of hydrosoluble active principle (herein the antibiotic levofloxacin) and their releasing profile is marked by an important “burst effect”. |
2017Article de journal ER2 Auteurs : Kasmi, A; Abriak, Nor-Edine; Benzerzour, Mahfoud; Azrar, H Environmental impact and mechanical behavior study of experimental road made with river sediments: recycling of river sediments in road construction Dans: Journal of Material Cycles and Waste Management, vol. 19, no. 4, p. 1405-1414, 2017, (ACL). Liens @article{Kasmi20171405,
title = {Environmental impact and mechanical behavior study of experimental road made with river sediments: recycling of river sediments in road construction},
author = {A Kasmi and Nor-Edine Abriak and Mahfoud Benzerzour and H Azrar},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84976367307&doi=10.1007%2fs10163-016-0529-5&partnerID=40&md5=091d1fb669f23ac77e94daec63b1efae},
doi = {10.1007/s10163-016-0529-5},
year = {2017},
date = {2017-01-01},
journal = {Journal of Material Cycles and Waste Management},
volume = {19},
number = {4},
pages = {1405-1414},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2017Article de journal ER2 Auteurs : Le, N H; Abriak, Nor-Edine; Binetruy, C; Benzerzour, Mahfoud; Nguyen, S -T Mechanical behavior of municipal solid waste incinerator bottom ash: Results from triaxial tests Dans: Waste Management, vol. 65, p. 37-46, 2017, (ACL). Liens @article{Le201737,
title = {Mechanical behavior of municipal solid waste incinerator bottom ash: Results from triaxial tests},
author = {N H Le and Nor-Edine Abriak and C Binetruy and Mahfoud Benzerzour and S -T Nguyen},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85017164337&doi=10.1016%2fj.wasman.2017.03.045&partnerID=40&md5=c720ada191d04c773c3335198ff9dd3f},
doi = {10.1016/j.wasman.2017.03.045},
year = {2017},
date = {2017-01-01},
journal = {Waste Management},
volume = {65},
pages = {37-46},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2017Article de journal ER2 Auteurs : Kasmi, A; Abriak, Nor-Edine; Benzerzour, Mahfoud; Azrar, H Effect of Dewatering by the Addition of Flocculation Aid on Treated River Sediments for Valorization in Road Construction Dans: Waste and Biomass Valorization, vol. 8, no. 3, p. 585-597, 2017, (ACL). Liens @article{Kasmi2017585,
title = {Effect of Dewatering by the Addition of Flocculation Aid on Treated River Sediments for Valorization in Road Construction},
author = {A Kasmi and Nor-Edine Abriak and Mahfoud Benzerzour and H Azrar},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85001610205&doi=10.1007%2fs12649-016-9587-0&partnerID=40&md5=403758531cf46d0ce5d507c1563b5eb2},
doi = {10.1007/s12649-016-9587-0},
year = {2017},
date = {2017-01-01},
journal = {Waste and Biomass Valorization},
volume = {8},
number = {3},
pages = {585-597},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2017Article de journal ER2 Auteurs : Benzerzour, Mahfoud; Sebaibi, N; Maherzi, Walid; Abriak, Nor-Edine; Sebaibi, Y A bibliography on the analytical model of the mechanical behaviour in uniaxial tension of fibre concrete: Application to concrete reinforced with fibres and powders from recycling of thermoset composite materials Dans: Construction and Building Materials, vol. 131, p. 214-228, 2017, (ACL). Liens @article{Benzerzour2017214,
title = {A bibliography on the analytical model of the mechanical behaviour in uniaxial tension of fibre concrete: Application to concrete reinforced with fibres and powders from recycling of thermoset composite materials},
author = {Mahfoud Benzerzour and N Sebaibi and Walid Maherzi and Nor-Edine Abriak and Y Sebaibi},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84998890556&doi=10.1016%2fj.conbuildmat.2016.11.060&partnerID=40&md5=2d9d35dc9711ad464781f5167101243e},
doi = {10.1016/j.conbuildmat.2016.11.060},
year = {2017},
date = {2017-01-01},
journal = {Construction and Building Materials},
volume = {131},
pages = {214-228},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2017Article de journal ER2 Auteurs : Thiéry, Vincent; Trincal, V; Davy, C The elusive ettringite under the high-vacuum SEM - a reflection based on natural samples, the use of Monte-Carlo modeling of EDS analyses, and an extension to the ettringite group minerals Dans: Journal of Microscopy, vol. 268, p. 84–93, 2017. @article{Thiery2017,
title = {The elusive ettringite under the high-vacuum SEM - a reflection based on natural samples, the use of Monte-Carlo modeling of EDS analyses, and an extension to the ettringite group minerals},
author = {Vincent Thiéry and V Trincal and C Davy},
year = {2017},
date = {2017-01-01},
journal = {Journal of Microscopy},
volume = {268},
pages = {84--93},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2017Proceedings Article ER2 Auteurs : Thiéry, Vincent; Link, G; Katayama, T; Ando, Y; Bouichou, M; Marie-Victoire, E Preliminary study of 19th century mortars from railway engineering structures abandoned since 1950 Dans: Euroseminars on Microscopy Applied to Building Materials (EMABM), 2017. @inproceedings{Thiery2017a,
title = {Preliminary study of 19th century mortars from railway engineering structures abandoned since 1950},
author = {Vincent Thiéry and G Link and T Katayama and Y Ando and M Bouichou and E Marie-Victoire},
year = {2017},
date = {2017-01-01},
booktitle = {Euroseminars on Microscopy Applied to Building Materials (EMABM)},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2017Conférence ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sébastien Differences between Laboratory and In-Situ Conditions Leading to Bad Estimation of the Water Absorption Capacity of Recycled Concrete Aggregates HISER, International Conference, Delft, Netherlands, 2017, (ACTI, ACTN, AFF, COM, INV). @conference{Khoury2017a,
title = {Differences between Laboratory and In-Situ Conditions Leading to Bad Estimation of the Water Absorption Capacity of Recycled Concrete Aggregates},
author = {Eliane Khoury and Bogdan Cazacliu and Sébastien Remond},
year = {2017},
date = {2017-01-01},
booktitle = {HISER, International Conference, Delft, Netherlands},
note = {ACTI, ACTN, AFF, COM, INV},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2017Article de journal ER2 Auteurs : Wang, D; Abriak, Nor-Edine; Zentar, Rachid Dredged marine sediments used as novel supply of filling materials for road construction Dans: Marine Georesources & …, vol. 35, no. 4, p. 472-480, 2017, (ACL). Liens @article{Wang2017,
title = {Dredged marine sediments used as novel supply of filling materials for road construction},
author = {D Wang and Nor-Edine Abriak and Rachid Zentar},
url = {https://www.tandfonline.com/doi/abs/10.1080/1064119X.2016.1198945},
doi = {https://doi.org/10.1080/1064119X.2016.1198945},
year = {2017},
date = {2017-01-01},
journal = {Marine Georesources & …},
volume = {35},
number = {4},
pages = {472-480},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2017Article de journal ER2 Auteurs : Djafari, D; Semcha, A; Zentar, Rachid; ..., Characterization and valorization of sludge of wastewater treatment plant (wwtps) into cement industry Dans: Journal of Materials …, vol. 8, no. 4, p. 1350-1358, 2017, (ACL). Liens @article{Djafari2017,
title = {Characterization and valorization of sludge of wastewater treatment plant (wwtps) into cement industry},
author = {D Djafari and A Semcha and Rachid Zentar and ...},
url = {http://www.jmaterenvironsci.com/Document/vol8/vol8_N4/143-JMES-3161-Djafari.pdf},
year = {2017},
date = {2017-01-01},
journal = {Journal of Materials …},
volume = {8},
number = {4},
pages = {1350-1358},
publisher = {jmaterenvironsci.com},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2017Conférence ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sébastien Caractérisation de l'hétérogénéité des granulats recyclés, une variabilité intrinsèque conférence internationale francophone NoMad , nouveaux matériaux et durabilité, 2017, (ACTI, ACTN, AFF, COM, INV). @conference{Khoury2017b,
title = {Caractérisation de l'hétérogénéité des granulats recyclés, une variabilité intrinsèque},
author = {Eliane Khoury and Bogdan Cazacliu and Sébastien Remond},
year = {2017},
date = {2017-01-01},
booktitle = {conférence internationale francophone NoMad , nouveaux matériaux et durabilité},
note = {ACTI, ACTN, AFF, COM, INV},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER2 Auteurs : Khoury, Eliane; Cazacliu, Bogdan; Remond, Sébastien Capacité d’Absorption d’Eau (WA) des Gravillons de Béton Recyclés (GBR) 2ème Colloque RECYBETON « le recyclage du béton en béton, tout à fait naturellement », 2017, (ACTI, ACTN, AFF, COM, INV). @conference{Khoury2017d,
title = {Capacité d’Absorption d’Eau (WA) des Gravillons de Béton Recyclés (GBR)},
author = {Eliane Khoury and Bogdan Cazacliu and Sébastien Remond},
year = {2017},
date = {2017-01-01},
booktitle = {2ème Colloque RECYBETON « le recyclage du béton en béton, tout à fait naturellement »},
note = {ACTI, ACTN, AFF, COM, INV},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2017Rapport technique ER2 Auteurs : Cothenet, Alexis; Khoury, Eliane; Artoni, Riccardo; Cazacliu, Bogdan Echantillonnage des Granulats Recyclés IFSTTAR - PN Recybéton 2017. @techreport{Cothenet2017,
title = {Echantillonnage des Granulats Recyclés},
author = {Alexis Cothenet and Eliane Khoury and Riccardo Artoni and Bogdan Cazacliu},
year = {2017},
date = {2017-01-01},
institution = {IFSTTAR - PN Recybéton},
keywords = {ER2},
pubstate = {published},
tppubtype = {techreport}
}
|
2017Article de journal ER2 Auteurs : Alhaik, Ghaith; Ferreira, Michel; Dubois, Vincent; Wirquin, Eric; Tilloy, Sébastien; Monflier, Eric; Aouad, Georges Enhance the rheological and mechanical properties of clayey materials by adding starches Dans: Construction and Building Materials, vol. 139, p. 602 - 610, 2017, ISSN: 0950-0618. Résumé | Liens @article{ALHAIK2017602,
title = {Enhance the rheological and mechanical properties of clayey materials by adding starches},
author = {Ghaith Alhaik and Michel Ferreira and Vincent Dubois and Eric Wirquin and Sébastien Tilloy and Eric Monflier and Georges Aouad},
url = {http://www.sciencedirect.com/science/article/pii/S0950061816318992},
doi = {https://doi.org/10.1016/j.conbuildmat.2016.11.130},
issn = {0950-0618},
year = {2017},
date = {2017-01-01},
journal = {Construction and Building Materials},
volume = {139},
pages = {602 - 610},
abstract = {This research work highlights the rheological and mechanical behavior of clayey/starch mixes. Several native and derivate starches have been studied in association with two types of clayey materials : quarry fines and kaolinite. The mixes were manufactured with a constant starch/clayey material ratio of 1%. The optimal water content has been determinate by the flow test. The rheological and mechanical tests have shown a significant effect of starch on the properties of mixes. In the rheological part, most starches have induced an increase up to four times the thixotropic index for quarry fines, while a decrease of this parameter has been observed with the kaolinite. From a mechanical point of view, all starches increase mechanical strengths whatever the clayey material.},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
This research work highlights the rheological and mechanical behavior of clayey/starch mixes. Several native and derivate starches have been studied in association with two types of clayey materials : quarry fines and kaolinite. The mixes were manufactured with a constant starch/clayey material ratio of 1%. The optimal water content has been determinate by the flow test. The rheological and mechanical tests have shown a significant effect of starch on the properties of mixes. In the rheological part, most starches have induced an increase up to four times the thixotropic index for quarry fines, while a decrease of this parameter has been observed with the kaolinite. From a mechanical point of view, all starches increase mechanical strengths whatever the clayey material. |
2017Article de journal ER2 Auteurs : Chabannes, Morgan; Becquart, Frédéric; Garcia-Diaz, Eric; Abriak, Nor-Edine; Laurent, Clerc Experimental investigation of the shear behaviour of hemp and rice husk-based concretes using triaxial compression Dans: Construction and Building Materials, vol. 143, p. 621 - 632, 2017, ISSN: 0950-0618, (ACL). Résumé | Liens @article{CHABANNES2017621,
title = {Experimental investigation of the shear behaviour of hemp and rice husk-based concretes using triaxial compression},
author = {Morgan Chabannes and Frédéric Becquart and Eric Garcia-Diaz and Nor-Edine Abriak and Clerc Laurent},
url = {http://www.sciencedirect.com/science/article/pii/S0950061817305378},
doi = {https://doi.org/10.1016/j.conbuildmat.2017.03.148},
issn = {0950-0618},
year = {2017},
date = {2017-01-01},
journal = {Construction and Building Materials},
volume = {143},
pages = {621 - 632},
abstract = {Lime and hemp concretes are used as infill materials manually tamped in timber stud walls or more recently in the form of precast blocks. In either case, the structural design practice of wood frame construction associated with hemp concrete does not assume any contribution of the plant-based concrete whereas it may contribute towards the racking strength of the wall. This work is intended to evaluate the shear behaviour of two different bio-based concretes by means of triaxial compression. Hemp shives and whole rice husks were mixed with a lime-based binder according to the same mix proportioning and mixes were vibro-compacted in cylindrical forms. Then, samples were cured at 23°C – 65%RH before being tested under unconfined and triaxial compression. The triaxial shear test was performed after 60days of curing on unsaturated specimens under drained conditions at air pressure and for increasing effective confining pressure (from 25 to 150kPa). It was possible to estimate the shear strength parameters (peak friction angle and cohesion) of the two plant-based concretes. Comparing results, it appears a consistent value of cohesion but a different friction angle related to the binder and the aggregate contributions respectively. This leads to a first analysis of the relationship between the composition of the concrete (plant aggregates cemented with a binder) and its shear strength. Furthermore, the ductility of plant-based concretes is markedly enhanced as the mean effective pressure increases. Finally, the shear strength of plant-based concretes should be considered as part of the design practice of building envelopes.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Lime and hemp concretes are used as infill materials manually tamped in timber stud walls or more recently in the form of precast blocks. In either case, the structural design practice of wood frame construction associated with hemp concrete does not assume any contribution of the plant-based concrete whereas it may contribute towards the racking strength of the wall. This work is intended to evaluate the shear behaviour of two different bio-based concretes by means of triaxial compression. Hemp shives and whole rice husks were mixed with a lime-based binder according to the same mix proportioning and mixes were vibro-compacted in cylindrical forms. Then, samples were cured at 23°C – 65%RH before being tested under unconfined and triaxial compression. The triaxial shear test was performed after 60days of curing on unsaturated specimens under drained conditions at air pressure and for increasing effective confining pressure (from 25 to 150kPa). It was possible to estimate the shear strength parameters (peak friction angle and cohesion) of the two plant-based concretes. Comparing results, it appears a consistent value of cohesion but a different friction angle related to the binder and the aggregate contributions respectively. This leads to a first analysis of the relationship between the composition of the concrete (plant aggregates cemented with a binder) and its shear strength. Furthermore, the ductility of plant-based concretes is markedly enhanced as the mean effective pressure increases. Finally, the shear strength of plant-based concretes should be considered as part of the design practice of building envelopes. |
2017Article de journal ER2 Auteurs : Chafei, Sawsen; Gomina, Moussa; Khadraoui, Fouzia; Boutouil, Mohamed Dependence of the properties of cementitious composites on the nature of the hydraulic binder coating the reinforcing flax fibers Dans: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2017, ISSN: 2278-1684,p-ISSN: 2320-334X, (ACL). Résumé | Liens @article{CHAF2017S,
title = {Dependence of the properties of cementitious composites on the nature of the hydraulic binder coating the reinforcing flax fibers},
author = {Sawsen Chafei and Moussa Gomina and Fouzia Khadraoui and Mohamed Boutouil},
doi = {10.9790/1684-1406012733},
issn = {2278-1684,p-ISSN: 2320-334X},
year = {2017},
date = {2017-01-01},
journal = {IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE)},
abstract = {This work aims to improve the formulation of short flax fiber-reinforced mortar through coating the raw fibers with hydraulic binders like cement or lime, or cleaning them in boiling water prior to the coating. These treatments are chosen for their ability to reduce the water intake by the fibers and to minimize the migration of their extractible compounds toward the cement matrix. Formulations incorporating raw or treated fibers were characterized in the fresh state. The results showed a drastic reduction of water intake, which correlates with an improvement of the properties of the fiber-mortar mixtures in the fresh state, particularly in terms of the heat of hydration, initial setting time and consistency. Mechanical behavior of the different formulations is also evaluated by flexural tests.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
This work aims to improve the formulation of short flax fiber-reinforced mortar through coating the raw fibers with hydraulic binders like cement or lime, or cleaning them in boiling water prior to the coating. These treatments are chosen for their ability to reduce the water intake by the fibers and to minimize the migration of their extractible compounds toward the cement matrix. Formulations incorporating raw or treated fibers were characterized in the fresh state. The results showed a drastic reduction of water intake, which correlates with an improvement of the properties of the fiber-mortar mixtures in the fresh state, particularly in terms of the heat of hydration, initial setting time and consistency. Mechanical behavior of the different formulations is also evaluated by flexural tests. |
2017Thèse ER2 Auteurs : Amar, Mouhamadou Traitement des sédiments de dragage pour une valorisation dans les matrices cimentaires Lille 1, 2017, (TH). Résumé @phdthesis{amar2017traitement,
title = {Traitement des sédiments de dragage pour une valorisation dans les matrices cimentaires},
author = {Mouhamadou Amar},
year = {2017},
date = {2017-01-01},
school = {Lille 1},
abstract = {In France, construction sector annual needings for granular materials are close to 400 million tons, of which 96% are natural origin. Therefore it becomes highly necessary to find alternatives solutions, particularly in the valorisation of industrial by-products (IBP)
such as dredging sediments. Marine sediments are designated as a secondary raw material in this study. However, the latter may present varying levels of pollution, with the presence of organic matter (5% to 30%), relatively high water content (50% to 200%) and a fairly fine granulometry (6 300μm). Currently, research target to use them as a supplementary
mineral addition in concrete after efficient methods of treatment that improve some physico-chemical properties. The aim of this this study is to establish a profitable methodology for the use of sediments in cementitious matrix. In this report, we present first a bibliographical review on this subject. At the experimental level, a physico-chemical characterization was carried out, determining the major parameters to be considered, the effects of the treatment on material properties, the likely impact of the presence of
sediments in the cementitious matrix, and an experimental methodology to quantify these various effects. The cementitious materials formulated will be analysed and characterized at four scales : physico-chemical, mechanical, durability and the environmental impact. The analysis of the mechanical results makes possible to assess the activity of this material
and to implement adapted formulation laws.},
note = {TH},
keywords = {ER2},
pubstate = {published},
tppubtype = {phdthesis}
}
In France, construction sector annual needings for granular materials are close to 400 million tons, of which 96% are natural origin. Therefore it becomes highly necessary to find alternatives solutions, particularly in the valorisation of industrial by-products (IBP)
such as dredging sediments. Marine sediments are designated as a secondary raw material in this study. However, the latter may present varying levels of pollution, with the presence of organic matter (5% to 30%), relatively high water content (50% to 200%) and a fairly fine granulometry (6 300μm). Currently, research target to use them as a supplementary
mineral addition in concrete after efficient methods of treatment that improve some physico-chemical properties. The aim of this this study is to establish a profitable methodology for the use of sediments in cementitious matrix. In this report, we present first a bibliographical review on this subject. At the experimental level, a physico-chemical characterization was carried out, determining the major parameters to be considered, the effects of the treatment on material properties, the likely impact of the presence of
sediments in the cementitious matrix, and an experimental methodology to quantify these various effects. The cementitious materials formulated will be analysed and characterized at four scales : physico-chemical, mechanical, durability and the environmental impact. The analysis of the mechanical results makes possible to assess the activity of this material
and to implement adapted formulation laws. |
2017Article de journal ER2 Auteurs : Benzerzour, Mahfoud; Amar, Mouhamadou; Abriak, Nor-Edine New experimental approach of the reuse of dredged sediments in a cement matrix by physical and heat treatment Dans: Construction and Building Materials, vol. 140, p. 432 - 444, 2017, ISSN: 0950-0618, (ACL). Résumé | Liens @article{BENZERZOUR2017432,
title = {New experimental approach of the reuse of dredged sediments in a cement matrix by physical and heat treatment},
author = {Mahfoud Benzerzour and Mouhamadou Amar and Nor-Edine Abriak},
url = {http://www.sciencedirect.com/science/article/pii/S0950061817303446},
doi = {https://doi.org/10.1016/j.conbuildmat.2017.02.142},
issn = {0950-0618},
year = {2017},
date = {2017-01-01},
journal = {Construction and Building Materials},
volume = {140},
pages = {432 - 444},
abstract = {Dans cette étude, les sédiments sont utilisés comme matière première secondaire en substitution du ciment moyennant un traitement préalable. Le traitement envisagé est un traitement physique par broyage et séparation afin d’obtenir différentes fractions, par voie sèche (1mm, 250μm, 120μm) et par voie humide (250μm et 120μm). Ils sont par la suite traités thermiquement à des températures de 650°C, 750°C et 850°C pendant 1 heure et 3 heures, dans le but de les activer chimiquement par décarbonatation ou activation pouzzolanique du matériau. Différents essais de caractérisation ont été effectués. La détermination des caractéristiques physiques et chimiques principales est obtenue grâce à des essais de: granulométrie, masse volumique spécifique, la surface spécifique BET, estimation temps de début de prise ainsi que la chaleur d’hydratation par calorimétrie Langavant. Les essais chimiques menés sont entre autres: l’analyse ATG, la diffractométrie au rayon X (DRX) et la fluorescence X (FX), qui ont permis de quantifier les fractions, phases et éléments chimiques présents. Les essais à la compression ont été effectués conformément à la NF EN 196-1 à des échéances de 7 jours – 14 jours - 28 jours et 60 jours sur l’ensemble des mortiers formulés: les mortiers à base 100% de ciment CEM I 52.5N, sur ceux substitués à des taux de 8% et 15% par le sédiment traité. Ceux-ci ont permis de relever un apport dû à l’activité confirmée par des essais de calorimétrie ou du point de vue physique à une possible nucléation hétérogène autour des grains de sédiment.
In this study, a sediment was used as a secondary raw material in cement substitution with prior treatment. The treatment adopted is a physical treatment involving grinding and separation to obtain different fractions, using a dry method (1mm, 250µm, 120µm) and washing method (250µm and 120µm). They were subsequently heat treated at temperatures of 650°C, 750°C and 850°C for 1h and 3h, in order to enable chemical activation by decarbonation or by pozzolanic activation of the material. Different characterization tests were performed. The determination of main physical and chemical characteristics was obtained through multiple techniques: particle size distribution, specific density, the BET surface area, the initial setting time and hydration heat calorimetry Langavant. The chemical tests include: TGA analysis, X-ray diffractometry (XRD) and X-ray fluorescence (XRF) which were used to quantify the fractions, phases and chemical elements present. Compression tests were performed conforming NF EN 196-1 French standard, over terms of 7days – 14days – 28days and 60days on all formulated mortars: reference mortar based on 100% CEM I 52.5N binder and cement substituted mortars with 8% and 15% by treated sediment. This clearly evidenced contribution due to chemical activity which was confirmed by calorimetry monitoring and strength investigation.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Dans cette étude, les sédiments sont utilisés comme matière première secondaire en substitution du ciment moyennant un traitement préalable. Le traitement envisagé est un traitement physique par broyage et séparation afin d’obtenir différentes fractions, par voie sèche (1mm, 250μm, 120μm) et par voie humide (250μm et 120μm). Ils sont par la suite traités thermiquement à des températures de 650°C, 750°C et 850°C pendant 1 heure et 3 heures, dans le but de les activer chimiquement par décarbonatation ou activation pouzzolanique du matériau. Différents essais de caractérisation ont été effectués. La détermination des caractéristiques physiques et chimiques principales est obtenue grâce à des essais de: granulométrie, masse volumique spécifique, la surface spécifique BET, estimation temps de début de prise ainsi que la chaleur d’hydratation par calorimétrie Langavant. Les essais chimiques menés sont entre autres: l’analyse ATG, la diffractométrie au rayon X (DRX) et la fluorescence X (FX), qui ont permis de quantifier les fractions, phases et éléments chimiques présents. Les essais à la compression ont été effectués conformément à la NF EN 196-1 à des échéances de 7 jours – 14 jours - 28 jours et 60 jours sur l’ensemble des mortiers formulés: les mortiers à base 100% de ciment CEM I 52.5N, sur ceux substitués à des taux de 8% et 15% par le sédiment traité. Ceux-ci ont permis de relever un apport dû à l’activité confirmée par des essais de calorimétrie ou du point de vue physique à une possible nucléation hétérogène autour des grains de sédiment.
In this study, a sediment was used as a secondary raw material in cement substitution with prior treatment. The treatment adopted is a physical treatment involving grinding and separation to obtain different fractions, using a dry method (1mm, 250µm, 120µm) and washing method (250µm and 120µm). They were subsequently heat treated at temperatures of 650°C, 750°C and 850°C for 1h and 3h, in order to enable chemical activation by decarbonation or by pozzolanic activation of the material. Different characterization tests were performed. The determination of main physical and chemical characteristics was obtained through multiple techniques: particle size distribution, specific density, the BET surface area, the initial setting time and hydration heat calorimetry Langavant. The chemical tests include: TGA analysis, X-ray diffractometry (XRD) and X-ray fluorescence (XRF) which were used to quantify the fractions, phases and chemical elements present. Compression tests were performed conforming NF EN 196-1 French standard, over terms of 7days – 14days – 28days and 60days on all formulated mortars: reference mortar based on 100% CEM I 52.5N binder and cement substituted mortars with 8% and 15% by treated sediment. This clearly evidenced contribution due to chemical activity which was confirmed by calorimetry monitoring and strength investigation. |
2017Article de journal ER2 Auteurs : Amar, Mouhamadou; Benzerzour, Mahfoud; Abriak, Nor-Edine; Mamindy-Pajany, Yannick Study of the pozzolanic activity of a dredged sediment from Dunkirk harbour Dans: Powder Technology, vol. 320, p. 748 - 764, 2017, ISSN: 0032-5910, (ACL). Résumé | Liens @article{AMAR2017748,
title = {Study of the pozzolanic activity of a dredged sediment from Dunkirk harbour},
author = {Mouhamadou Amar and Mahfoud Benzerzour and Nor-Edine Abriak and Yannick Mamindy-Pajany},
url = {http://www.sciencedirect.com/science/article/pii/S0032591017305909},
doi = {https://doi.org/10.1016/j.powtec.2017.07.055},
issn = {0032-5910},
year = {2017},
date = {2017-01-01},
journal = {Powder Technology},
volume = {320},
pages = {748 - 764},
abstract = {Les additions ou produits de substitution dans les matrices cimentaires sont généralement caractérisés par leur aptitude à réagir dans des conditions spécifiées. Cette caractéristique peut être appréciée au travers de la mesure de l’activité pouzzolanique. Dans cette étude, la pouzzolanicité d’une certaine catégorie de matériaux est étudiée. Pour cela, les essais de Frattini conforme à la norme NF EN 196-5, l’essai Chapelle accéléré, la mesure de la conductivité électrique et le calcul du coefficient d’activité mécanique sont mis en place. Les résultats indiquent que le sédiment brut provenant du Grand Port Maritime de Dunkerque présente une relative faible activité pouzzolanique quel que soit le test considéré. Cependant, l’étude de fractions calcinées par voie directe ou par calcination flash a montré que le sédiment présente, à l’issue de ces processus, une activité améliorée. L’étude comparée avec plusieurs additions courantes a permis de démontrer la bonne fiabilité des méthodes de Chapelle et l’indice d’activité mécanique pour une grande diversité d'additions minérales. Toutefois, au test de conductivité, une correction doit être appliquée du fait de la présence de sels dissous. Des coefficients d’activité mécanique χA=0.88 et χA=0.73 ont été déterminés respectivement pour le STFC (flash) et le STDC (calcination directe). En conséquence, les sédiments, moyennant un traitement adéquat peuvent être utilisés comme des additions minérales actives pour les matrices cimentaires. Admixtures or supplementary cementitious materials are generally characterised by their ability to react in specified conditions. This can be assumed through the pozzolanicity. In this study, the pozzolanic activity of a certain category of materials was investigated. For this purpose, the Frattini test conforming to NF EN 196-5 French standard, the accelerated Chapelle test, the measurement of the electrical conductivity and the calculation of mechanical activity coefficient were performed. The raw sediment from Dunkirk harbour presented a relatively low pozzolanic activity regardless of the test considered. However, the study of direct or flash calcined materials evidenced that sediment acquired at the end of these processes an improvement of pozzolanic activity. The comparative study conducted on several common admixtures also inferred that the Chapelle and mechanical activity index methods are quite appropriate and reliable. Nevertheless, in the conductivity test, a correction must be applied due to the presence of dissolved salts. A mechanical activity coefficient of χA=0.88 and χA=0.73 was determined for STFC (flash) and STDC (direct lab kiln) respectively. As a result, sediment, following an optimized treatment can be used as active mineral admixture in cementitious matrixes.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Les additions ou produits de substitution dans les matrices cimentaires sont généralement caractérisés par leur aptitude à réagir dans des conditions spécifiées. Cette caractéristique peut être appréciée au travers de la mesure de l’activité pouzzolanique. Dans cette étude, la pouzzolanicité d’une certaine catégorie de matériaux est étudiée. Pour cela, les essais de Frattini conforme à la norme NF EN 196-5, l’essai Chapelle accéléré, la mesure de la conductivité électrique et le calcul du coefficient d’activité mécanique sont mis en place. Les résultats indiquent que le sédiment brut provenant du Grand Port Maritime de Dunkerque présente une relative faible activité pouzzolanique quel que soit le test considéré. Cependant, l’étude de fractions calcinées par voie directe ou par calcination flash a montré que le sédiment présente, à l’issue de ces processus, une activité améliorée. L’étude comparée avec plusieurs additions courantes a permis de démontrer la bonne fiabilité des méthodes de Chapelle et l’indice d’activité mécanique pour une grande diversité d'additions minérales. Toutefois, au test de conductivité, une correction doit être appliquée du fait de la présence de sels dissous. Des coefficients d’activité mécanique χA=0.88 et χA=0.73 ont été déterminés respectivement pour le STFC (flash) et le STDC (calcination directe). En conséquence, les sédiments, moyennant un traitement adéquat peuvent être utilisés comme des additions minérales actives pour les matrices cimentaires. Admixtures or supplementary cementitious materials are generally characterised by their ability to react in specified conditions. This can be assumed through the pozzolanicity. In this study, the pozzolanic activity of a certain category of materials was investigated. For this purpose, the Frattini test conforming to NF EN 196-5 French standard, the accelerated Chapelle test, the measurement of the electrical conductivity and the calculation of mechanical activity coefficient were performed. The raw sediment from Dunkirk harbour presented a relatively low pozzolanic activity regardless of the test considered. However, the study of direct or flash calcined materials evidenced that sediment acquired at the end of these processes an improvement of pozzolanic activity. The comparative study conducted on several common admixtures also inferred that the Chapelle and mechanical activity index methods are quite appropriate and reliable. Nevertheless, in the conductivity test, a correction must be applied due to the presence of dissolved salts. A mechanical activity coefficient of χA=0.88 and χA=0.73 was determined for STFC (flash) and STDC (direct lab kiln) respectively. As a result, sediment, following an optimized treatment can be used as active mineral admixture in cementitious matrixes. |
2016Article de journal ER2 Auteurs : Delobel, F; Bulteel, David; Mechling, J M; Lecomte, A; Cyr, M; Rémond, Sébastien Application of ASR tests to recycled concrete aggregates: Influence of water absorption Dans: Construction and Building Materials, vol. 124, p. 714–721, 2016, (ACL). Liens @article{Delobel2016,
title = {Application of ASR tests to recycled concrete aggregates: Influence of water absorption},
author = {F Delobel and David Bulteel and J M Mechling and A Lecomte and M Cyr and Sébastien Rémond},
doi = {10.1016/j.conbuildmat.2016.08.004},
year = {2016},
date = {2016-10-01},
journal = {Construction and Building Materials},
volume = {124},
pages = {714--721},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Bourdot, Alexandra; Thiéry, Vincent; Bulteel, David; Hammerschlag, Jean-Gabriel Effect of burnt oil shale on ASR expansions: A petrographic study of concretes based on reactive aggregates Dans: Construction and Building Materials, vol. 112, p. 556–569, 2016, (ACL). Liens @article{Bourdot2016,
title = {Effect of burnt oil shale on ASR expansions: A petrographic study of concretes based on reactive aggregates},
author = {Alexandra Bourdot and Vincent Thiéry and David Bulteel and Jean-Gabriel Hammerschlag},
doi = {10.1016/j.conbuildmat.2016.02.148},
year = {2016},
date = {2016-06-01},
journal = {Construction and Building Materials},
volume = {112},
pages = {556--569},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Belles, Angel; Mamindy-Pajany, Yannick; Alary, Claire Simulation of aromatic polycyclic hydrocarbons remobilization from a river sediment using laboratory experiments supported by passive sampling techniques Dans: Environmental Science and Pollution Research, vol. 23, no. 3, p. 2426-2436, 2016, (ACL). Résumé @article{Bell2015a,
title = {Simulation of aromatic polycyclic hydrocarbons remobilization from a river sediment using laboratory experiments supported by passive sampling techniques},
author = {Angel Belles and Yannick Mamindy-Pajany and Claire Alary},
year = {2016},
date = {2016-01-01},
journal = {Environmental Science and Pollution Research},
volume = {23},
number = {3},
pages = {2426-2436},
abstract = {Resuspension of bedded sediments was simulated under laboratory-controlled conditions in order to assess the amount of polycyclic aromatic hydrocarbons (PAH) remobilized in the dissolved fraction during one short and vigorous mixing. The desorbed amount of PAH was compared to the exchangeable fraction, the total amount of PAH sorbed on the sediment particles, and the dissolved PAH amount contained in the interstitial pore waters in order to evaluate the contribution of each fraction to the total amount of PAH released. To monitor the desorption of PAH and measure low trace level concentrations, passive samplers were used in an experimental open flow through exposure simulator. Results show that for the selected sediment, a substantial fraction of sorbed PAH (69 % of the total amount) is not available for remobilization in a depleted medium. Obtained data pinpoint that over 9 days, only 0.007 % of PAH are desorbed by passive diffusion through a water-sediment interface area of 415 cm2 and that an intense resuspension event of 15 min induces desorption of 0.015 % of PAH during the following 9 days. Results also highlight that during resuspension simulation, modifications of the sediment and the water body occurred since partitioning constants of some pollutants between sediment and water have significantly decreased.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Resuspension of bedded sediments was simulated under laboratory-controlled conditions in order to assess the amount of polycyclic aromatic hydrocarbons (PAH) remobilized in the dissolved fraction during one short and vigorous mixing. The desorbed amount of PAH was compared to the exchangeable fraction, the total amount of PAH sorbed on the sediment particles, and the dissolved PAH amount contained in the interstitial pore waters in order to evaluate the contribution of each fraction to the total amount of PAH released. To monitor the desorption of PAH and measure low trace level concentrations, passive samplers were used in an experimental open flow through exposure simulator. Results show that for the selected sediment, a substantial fraction of sorbed PAH (69 % of the total amount) is not available for remobilization in a depleted medium. Obtained data pinpoint that over 9 days, only 0.007 % of PAH are desorbed by passive diffusion through a water-sediment interface area of 415 cm2 and that an intense resuspension event of 15 min induces desorption of 0.015 % of PAH during the following 9 days. Results also highlight that during resuspension simulation, modifications of the sediment and the water body occurred since partitioning constants of some pollutants between sediment and water have significantly decreased. |
2016Article de journal ER2 Auteurs : Aubrun-Fillâtre, Celine; Monchau, Francine; Hivart, Philippe Acrylic bone cement and starch: Botanical variety impact on curing parameters and degradability Dans: Materials Science and Engineering: C, vol. 69, p. 1328-1334, 2016, ISSN: 0928-4931, (ACL). Résumé | Liens @article{AUBRUNFILLATRE20161328,
title = {Acrylic bone cement and starch: Botanical variety impact on curing parameters and degradability},
author = {Celine Aubrun-Fillâtre and Francine Monchau and Philippe Hivart},
url = {https://www.sciencedirect.com/science/article/pii/S0928493116307883},
doi = {10.1016/j.msec.2016.08.023},
issn = {0928-4931},
year = {2016},
date = {2016-01-01},
journal = {Materials Science and Engineering: C},
volume = {69},
pages = {1328-1334},
abstract = {Acrylic bone cements are a conventional solution to heal bone defects. Starch is often added to the cement to improve its degradability and resorbability. The most used botanical variety is corn starch; few studies or applications deal with other varieties. This study focuses on classical formulations based on 2-hydroxyethylmethacrylate but incorporating different starches: waxy maize, corn, amylo maize, wheat, pea or potato, with or without enzyme (α-amylase). A thermocouple is used to determine the curing parameters: setting time and maximal temperature. The water uptake depends on the cement immersion time in a biological fluid and it is studied through sample mass variation analysis. The weight loss is determined after immersion (function of the time) and drying. Starch botanical variety and enzyme presence do not impact curing parameters and water uptake but strongly influence degradability. Water uptake involves advantageous swelling in situ filling the defect. This study shows that starch accessibility by the enzyme explains this impact. Grain spatial configuration, specific surface area and starch distribution in cement give a complementary explanation of the well-known influence of the ratio amylopectin/amylose. Acrylic cements incorporating starch can be classified according to their degradability.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Acrylic bone cements are a conventional solution to heal bone defects. Starch is often added to the cement to improve its degradability and resorbability. The most used botanical variety is corn starch; few studies or applications deal with other varieties. This study focuses on classical formulations based on 2-hydroxyethylmethacrylate but incorporating different starches: waxy maize, corn, amylo maize, wheat, pea or potato, with or without enzyme (α-amylase). A thermocouple is used to determine the curing parameters: setting time and maximal temperature. The water uptake depends on the cement immersion time in a biological fluid and it is studied through sample mass variation analysis. The weight loss is determined after immersion (function of the time) and drying. Starch botanical variety and enzyme presence do not impact curing parameters and water uptake but strongly influence degradability. Water uptake involves advantageous swelling in situ filling the defect. This study shows that starch accessibility by the enzyme explains this impact. Grain spatial configuration, specific surface area and starch distribution in cement give a complementary explanation of the well-known influence of the ratio amylopectin/amylose. Acrylic cements incorporating starch can be classified according to their degradability. |
2016Article de journal ER2 Auteurs : Sekkal, Wassila; Zaoui, Ali; Benzerzour, Mahfoud; Abriak, Nor-Edine Role of porosity on the stiffness and stability of (001) surface of the nanogranular C-S-H gel Dans: Cement and Concrete Research, vol. 87, p. 45-52, 2016, (ACL). Liens @article{Sekkal201645,
title = {Role of porosity on the stiffness and stability of (001) surface of the nanogranular C-S-H gel},
author = {Wassila Sekkal and Ali Zaoui and Mahfoud Benzerzour and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84971463511&doi=10.1016%2fj.cemconres.2016.04.014&partnerID=40&md5=de4e7a812d35c1f3012cce823d01e82c},
doi = {10.1016/j.cemconres.2016.04.014},
year = {2016},
date = {2016-01-01},
journal = {Cement and Concrete Research},
volume = {87},
pages = {45-52},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Thiéry, Vincent Entre folklore, archéologie et géologie: la Roche Mandrin (Larodde, 63) Dans: Bulletin de la Société d'Histoire Naturelle d'Auvergne, vol. 80, p. 17–26, 2016. @article{Thiery2016b,
title = {Entre folklore, archéologie et géologie: la Roche Mandrin (Larodde, 63)},
author = {Vincent Thiéry},
year = {2016},
date = {2016-01-01},
journal = {Bulletin de la Société d'Histoire Naturelle d'Auvergne},
volume = {80},
pages = {17--26},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Proceedings Article ER2 Auteurs : Thiéry, Vincent; Meulenyzer, S; Bouichou, M; Marie-Victoire, E Some historical points about cementand microscopy in France Dans: Proceedings of the 38th International Conference on Cement Microscopy, 2016, ISBN: 193078712X. Résumé @inproceedings{Thiery2016a,
title = {Some historical points about cementand microscopy in France},
author = {Vincent Thiéry and S Meulenyzer and M Bouichou and E Marie-Victoire},
isbn = {193078712X},
year = {2016},
date = {2016-01-01},
booktitle = {Proceedings of the 38th International Conference on Cement Microscopy},
abstract = {France and cement microscopy are intimately linked since the pioneering works of the famous chemist Henry Le Chatelier (1850-1936) who was the first to use the petrographic microscope to describe the phases of Portland clinker and the products of cement hydration. Based on a selection of historical documents and samples, we will give a historical and technical overview of cement and binders, in the broadest sense, in France. We will cover several centuries, from the Roman aqueduct 'Pont du Gard' (1st century A.D.) to the first Portland-cement based bridge 'Pont de Souillac' built by Louis Vicat from 1812 to 1824, from the natural cements made in Burgundy to the ultrahigh performance decorative concrete used in modern architecture. In Burgundy, we will see the case of the Vassy church, built in 1859 by Gariel, a Vassy natural cement producer. Then, cement mortars from the 19th century, used for the restoration of the Saint-Pierre-et-Saint-Paul Cathedral portal in Troyes, will be presented.},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
France and cement microscopy are intimately linked since the pioneering works of the famous chemist Henry Le Chatelier (1850-1936) who was the first to use the petrographic microscope to describe the phases of Portland clinker and the products of cement hydration. Based on a selection of historical documents and samples, we will give a historical and technical overview of cement and binders, in the broadest sense, in France. We will cover several centuries, from the Roman aqueduct 'Pont du Gard' (1st century A.D.) to the first Portland-cement based bridge 'Pont de Souillac' built by Louis Vicat from 1812 to 1824, from the natural cements made in Burgundy to the ultrahigh performance decorative concrete used in modern architecture. In Burgundy, we will see the case of the Vassy church, built in 1859 by Gariel, a Vassy natural cement producer. Then, cement mortars from the 19th century, used for the restoration of the Saint-Pierre-et-Saint-Paul Cathedral portal in Troyes, will be presented. |
2016Proceedings Article ER2 Auteurs : Song, Y; Davy, C; Thiéry, Vincent; Troadec, D; Damidot, D Multi-scale assessment of the 3D pore network of a high performance concrete Dans: Proceedings of the 38th International Conference on Cement Microscopy, 2016, ISBN: 193078712X. @inproceedings{Song2016,
title = {Multi-scale assessment of the 3D pore network of a high performance concrete},
author = {Y Song and C Davy and Vincent Thiéry and D Troadec and D Damidot},
isbn = {193078712X},
year = {2016},
date = {2016-01-01},
booktitle = {Proceedings of the 38th International Conference on Cement Microscopy},
keywords = {ER2},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2016Patent ER2 Auteurs : Chartier, Thierry; Carpentier, Olivier Fluxmètre thermique 2016, (VAL). Résumé | Liens @patent{cha2016a,
title = {Fluxmètre thermique},
author = {Thierry Chartier and Olivier Carpentier},
url = {https://worldwide.espacenet.com/patent/search/family/055650584/publication/FR3048081A1?q=ap%3DFR1651535A},
year = {2016},
date = {2016-01-01},
urldate = {2016-01-01},
institution = {Université d'Artois},
abstract = {FR1651535A·2016-02-24
FR3048081A1; WO2017144545A1},
note = {VAL},
keywords = {ER2},
pubstate = {published},
tppubtype = {patent}
}
FR1651535A·2016-02-24
FR3048081A1; WO2017144545A1 |
2016Article de journal ER2 Auteurs : Dubois, Vincent; Wirquin, Eric; Flament, Cédric; Sloma, Philippe Fresh and hardened state properties of hemp concrete made up of a large proportion of quarry fines for the production of blocks Dans: Construction and Building Materials, vol. 102, Part 1, p. 84 - 93, 2016, ISSN: 0950-0618, (ACL). Liens @article{Dubois201684,
title = {Fresh and hardened state properties of hemp concrete made up of a large proportion of quarry fines for the production of blocks},
author = {Vincent Dubois and Eric Wirquin and Cédric Flament and Philippe Sloma},
url = {http://www.sciencedirect.com/science/article/pii/S0950061815306176},
doi = {http://dx.doi.org/10.1016/j.conbuildmat.2015.10.196},
issn = {0950-0618},
year = {2016},
date = {2016-01-01},
journal = {Construction and Building Materials},
volume = {102, Part 1},
pages = {84 - 93},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Petit, Jean-Yves; Comelli, Benjamin; Perrin, Renaud; Wirquin, Eric Effect of formulation parameters on adhesive properties of ANSI 118-15 and A118-11 compliant tile adhesive mortars Dans: International Journal of Adhesion & Adhesives, vol. 66, p. 73-80, 2016, (ACL). @article{pet2016a,
title = {Effect of formulation parameters on adhesive properties of ANSI 118-15 and A118-11 compliant tile adhesive mortars},
author = {Jean-Yves Petit and Benjamin Comelli and Renaud Perrin and Eric Wirquin},
year = {2016},
date = {2016-01-01},
journal = {International Journal of Adhesion & Adhesives},
volume = {66},
pages = {73-80},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : El-Cheikh, Khadija; Rémond, Sébastien; Pizette, Patrick; Vanhove, Yannick; Djelal-Dantec, Chafika Discrete Element study of granular material Bumpy wall interface behavior Dans: Physica A: Statistical Mechanics and its Applications, vol. 457, p. 526 - 539, 2016, ISSN: 0378-4371, (ACL). Liens @article{Elch2016a,
title = {Discrete Element study of granular material Bumpy wall interface behavior},
author = {Khadija El-Cheikh and Sébastien Rémond and Patrick Pizette and Yannick Vanhove and Chafika Djelal-Dantec},
url = {http://www.sciencedirect.com/science/article/pii/S0378437116300516},
doi = {http://dx.doi.org/10.1016/j.physa.2016.03.053},
issn = {0378-4371},
year = {2016},
date = {2016-01-01},
journal = {Physica A: Statistical Mechanics and its Applications},
volume = {457},
pages = {526 - 539},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Le, Thang; Rémond, Sébastien; Saout, Gwenn Le; Garcia-Diaz, Eric Fresh behavior of mortar based on recycled sand Influence of moisture condition Dans: Construction and Building Materials, vol. 106, p. 35 - 42, 2016, ISSN: 0950-0618, (ACL). Liens @article{Le2016a,
title = {Fresh behavior of mortar based on recycled sand Influence of moisture condition},
author = {Thang Le and Sébastien Rémond and Gwenn Le Saout and Eric Garcia-Diaz},
url = {http://www.sciencedirect.com/science/article/pii/S0950061815307455},
doi = {http://dx.doi.org/10.1016/j.conbuildmat.2015.12.071},
issn = {0950-0618},
year = {2016},
date = {2016-01-01},
journal = {Construction and Building Materials},
volume = {106},
pages = {35 - 42},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Pineaud, Alexandre; Pimienta, Pierre; Rémond, Sébastien; Carré, Hélène Mechanical properties of high performance self-compacting concretes at room and high temperature Dans: Construction and Building Materials, vol. 112, p. 747 - 755, 2016, ISSN: 0950-0618, (ACL). Liens @article{Pine2016a,
title = {Mechanical properties of high performance self-compacting concretes at room and high temperature},
author = {Alexandre Pineaud and Pierre Pimienta and Sébastien Rémond and Hélène Carré},
url = {http://www.sciencedirect.com/science/article/pii/S095006181630188X},
doi = {http://dx.doi.org/10.1016/j.conbuildmat.2016.02.132},
issn = {0950-0618},
year = {2016},
date = {2016-01-01},
journal = {Construction and Building Materials},
volume = {112},
pages = {747 - 755},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Wang, D; Zentar, Rachid; Abriak, Nor-Edine Interpretation of compression behavior of structured and remolded marine soils Dans: Journal of Materials in Civil …, 2016, (ACL). Liens @article{Wang2016,
title = {Interpretation of compression behavior of structured and remolded marine soils},
author = {D Wang and Rachid Zentar and Nor-Edine Abriak},
url = {https://ascelibrary.org/doi/abs/10.1061/(ASCE)MT.1943-5533.0001503},
doi = {https://doi.org/10.1061/(ASCE)MT.1943-5533.0001503},
year = {2016},
date = {2016-01-01},
journal = {Journal of Materials in Civil …},
publisher = {ascelibrary.org},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Sadok, A; Zentar, Rachid; Abriak, Nor-Edine Genetic programming for granular compactness modelling Dans: European Journal of Environmental …, vol. 20, no. 10, p. 1249-1261, 2016, (ACL). Liens @article{Sadok2016,
title = {Genetic programming for granular compactness modelling},
author = {A Sadok and Rachid Zentar and Nor-Edine Abriak},
url = {https://www.tandfonline.com/doi/abs/10.1080/19648189.2016.1150901},
doi = {https://doi.org/10.1080/19648189.2016.1150901},
year = {2016},
date = {2016-01-01},
journal = {European Journal of Environmental …},
volume = {20},
number = {10},
pages = {1249-1261},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Wang, D; Zentar, Rachid; Abriak, Nor-Edine Temperature-accelerated strength development in stabilized marine soils as road construction materials Dans: Journal of Materials in Civil …, vol. 29, no. 5, 2016, (ACL). Liens @article{Wang2016a,
title = {Temperature-accelerated strength development in stabilized marine soils as road construction materials},
author = {D Wang and Rachid Zentar and Nor-Edine Abriak},
url = {https://ascelibrary.org/doi/abs/10.1061/(ASCE)MT.1943-5533.0001778},
doi = {https://doi.org/10.1061/(ASCE)MT.1943-5533.0001778},
year = {2016},
date = {2016-01-01},
journal = {Journal of Materials in Civil …},
volume = {29},
number = {5},
publisher = {ascelibrary.org},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Conférence ER2 Auteurs : Zentar, Rachid; Sadok, A; Abriak, Nor-Edine Packing density of fine and sandy materials, experimental and modeling approaches researchgate.net, 2016, (ACTI). Liens @conference{Zentar2016,
title = {Packing density of fine and sandy materials, experimental and modeling approaches},
author = {Rachid Zentar and A Sadok and Nor-Edine Abriak},
url = {https://www.researchgate.net/profile/Abdelfeteh_Sadok/publication/305442288_PACKING_DENSITY_OF_FINE_AND_SANDY_MATERIALS_EXPERIMENTAL_AND_MODELING_APPROACHES/links/578f2f3e08ae9754b7ebfc8b/PACKING-DENSITY-OF-FINE-AND-SANDY-MATERIALS-EXPERIMENTAL-AND-MODELING-APPROACHES.pdf},
year = {2016},
date = {2016-01-01},
journal = {5th International Symposium on …},
publisher = {researchgate.net},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2016Article de journal ER2 Auteurs : Wang, D; Abriak, Nor-Edine; Zentar, Rachid Stress-dependent behavior of artificially structured and reconstituted marine soils Dans: International Journal of …, vol. 17, no. 4, 2016, (ACL). Liens @article{Wang2016b,
title = {Stress-dependent behavior of artificially structured and reconstituted marine soils},
author = {D Wang and Nor-Edine Abriak and Rachid Zentar},
url = {https://ascelibrary.org/doi/abs/10.1061/(ASCE)GM.1943-5622.0000804},
doi = {10.1061/(ASCE)GM.1943-5622.0000804},
year = {2016},
date = {2016-01-01},
journal = {International Journal of …},
volume = {17},
number = {4},
publisher = {ascelibrary.org},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Conférence ER2 Auteurs : Khoury, Eliane; al., Caractérisation de l’Hétérogénéité des Granulats de Béton Recyclés journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)2B, 2016. @conference{2016_134,
title = {Caractérisation de l’Hétérogénéité des Granulats de Béton Recyclés},
author = {Eliane Khoury and al.},
year = {2016},
date = {2016-01-01},
booktitle = {journées scientifiques du Regroupement francophone pour la recherche et la formation sur le béton (RF)2B},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER2 Auteurs : Sadok, A; Zentar, Rachid; Abriak, Nor-Edine Determination of water demand of dredged sediment in concrete formulations researchgate.net, 2016, (ACTI). Liens @conference{pop00095,
title = {Determination of water demand of dredged sediment in concrete formulations},
author = {A Sadok and Rachid Zentar and Nor-Edine Abriak},
url = {https://www.researchgate.net/profile/Abdelfeteh_Sadok/publication/305442448_DETERMINATION_OF_WATER_DEMAND_OF_DREDGED_SEDIMENT_IN_CONCRETE_FORMULATIONS/links/578f2fe308ae35e97c41a280.pdf},
year = {2016},
date = {2016-01-01},
journal = {5th International Symposium on …},
publisher = {researchgate.net},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2016Article de journal ER2 Auteurs : Azrar, H; Zentar, Rachid; Abriak, Nor-Edine The effect of granulation time of the pan granulation on the characteristics of the aggregates containing dunkirk sediments Dans: Procedia engineering, vol. 143, p. 10-17, 2016, (ACL). Liens @article{pop00131,
title = {The effect of granulation time of the pan granulation on the characteristics of the aggregates containing dunkirk sediments},
author = {H Azrar and Rachid Zentar and Nor-Edine Abriak},
url = {https://www.sciencedirect.com/science/article/pii/S1877705816304404},
doi = {https://doi.org/10.1016/j.proeng.2016.06.002},
year = {2016},
date = {2016-01-01},
journal = {Procedia engineering},
volume = {143},
pages = {10-17},
publisher = {Elsevier},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Article de journal ER2 Auteurs : Sadok, A; Zentar, Rachid; Abriak, Nor-Edine L'état sature surface humide (ssh) des matériaux fins ou a dominance fine dans les formulations de béton Dans: Revue Paralia, XIVèmes Journées …, 2016, (ACLN). Liens @article{pop00212,
title = {L'état sature surface humide (ssh) des matériaux fins ou a dominance fine dans les formulations de béton},
author = {A Sadok and Rachid Zentar and Nor-Edine Abriak},
url = {https://www.researchgate.net/profile/Abdelfeteh_Sadok/publication/307104499_L'etat_Sature_Surface_Humide_SSH_des_materiaux_fins_ou_a_dominance_fine_dans_les_formulations_de_beton/links/57c194b508aeb95224d7416b.pdf},
year = {2016},
date = {2016-01-01},
journal = {Revue Paralia, XIVèmes Journées …},
publisher = {researchgate.net},
note = {ACLN},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2016Conférence ER2 Auteurs : Dubois, Vincent; Wirquin, Eric; Maherzi, Walid; Benzerzour, Mahfoud Backfilling grout including a major part of fine sediments International Symposium on Sediment Management, Montréal 2016, (ACTI). @conference{dub2016c,
title = {Backfilling grout including a major part of fine sediments},
author = {Vincent Dubois and Eric Wirquin and Walid Maherzi and Mahfoud Benzerzour},
year = {2016},
date = {2016-00-01},
booktitle = {International Symposium on Sediment Management},
organization = {Montréal},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2015Article de journal ER2 Auteurs : Thiéry, Vincent; Bourdot, Alexandra; Bulteel, David Characterization of raw and burnt oil shale from Dotternhausen: Petrographical and mineralogical evolution with temperature Dans: Materials Characterization, vol. 106, p. 442–451, 2015, (ACL). Liens @article{Thiery2015b,
title = {Characterization of raw and burnt oil shale from Dotternhausen: Petrographical and mineralogical evolution with temperature},
author = {Vincent Thiéry and Alexandra Bourdot and David Bulteel},
doi = {10.1016/j.matchar.2015.06.022},
year = {2015},
date = {2015-08-01},
journal = {Materials Characterization},
volume = {106},
pages = {442--451},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER2 Auteurs : Pana, Ana-Maria; Popa, Marcel; Furca, Liliana-Marinela; Sfirloaga, Paula; Hadagura, Daniel; Bandur, Geza; Duchatel-Crépy, Lucie; Rusnac, Lucian-Mircea New Semi-Interpenetrating Networks Hydrogels Derived from Monosaccharide Based Oligomers, Chitosan and 2-Hydroxyethyl Methacrylate Dans: Journal of Hydrogels, vol. 8, p. 26 - 33, 2015, (ACL). Résumé | Liens @article{PANA20151,
title = {New Semi-Interpenetrating Networks Hydrogels Derived from Monosaccharide Based Oligomers, Chitosan and 2-Hydroxyethyl Methacrylate},
author = {Ana-Maria Pana and Marcel Popa and Liliana-Marinela Furca and Paula Sfirloaga and Daniel Hadagura and Geza Bandur and Lucie Duchatel-Crépy and Lucian-Mircea Rusnac},
doi = {https://doi.org/10.1166/jh.2015.1007},
year = {2015},
date = {2015-01-01},
journal = {Journal of Hydrogels},
volume = {8},
pages = {26 - 33},
abstract = {n the past few years, the drug delivery systems based on chitosan have drawn tremendous attention, because of their versatility, specificity, non-toxic, accurate and biodegradable nature. The hydrogels synthesized herein combine the properties of a polysaccharide (chitosan) with those of a sugar derived oligomer obtained through chemical modifications performed on pure D-glucose and D-mannose. First, the modification of the sugar raw materials (glucose/mannose) was carried out in order to obtain two oligomers containing a maleic skeleton. These oligomers, G and M were characterized previously. The synthesis of the hydrogels was carried out in aqueous solution, at 60 °C, using a weight ratio G(M):chitosan:HEMA = 1:1:5. The new hydrogels were tested for their thermal stability and their morphology was investigated using SEM/EDX. The hydrogels were also tested for their swelling behavior, and the kinetics of the including/release process was also assessed.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
n the past few years, the drug delivery systems based on chitosan have drawn tremendous attention, because of their versatility, specificity, non-toxic, accurate and biodegradable nature. The hydrogels synthesized herein combine the properties of a polysaccharide (chitosan) with those of a sugar derived oligomer obtained through chemical modifications performed on pure D-glucose and D-mannose. First, the modification of the sugar raw materials (glucose/mannose) was carried out in order to obtain two oligomers containing a maleic skeleton. These oligomers, G and M were characterized previously. The synthesis of the hydrogels was carried out in aqueous solution, at 60 °C, using a weight ratio G(M):chitosan:HEMA = 1:1:5. The new hydrogels were tested for their thermal stability and their morphology was investigated using SEM/EDX. The hydrogels were also tested for their swelling behavior, and the kinetics of the including/release process was also assessed. |
2015Article de journal ER2 Auteurs : Gregoire, P; Benzerzour, Mahfoud; Abriak, Nor-Edine; Damidot, Denis Bioaccumulation dans les tissus des espèces marines fréquentant les zones dimmersion Dans: MARINE SCIENCES COASTAL RESEARCH, vol. 1, no. 10, p. 1-14, 2015, (ACL). Résumé @article{GREG2015A,
title = {Bioaccumulation dans les tissus des espèces marines fréquentant les zones dimmersion},
author = {P Gregoire and Mahfoud Benzerzour and Nor-Edine Abriak and Denis Damidot},
year = {2015},
date = {2015-01-01},
journal = {MARINE SCIENCES COASTAL RESEARCH},
volume = {1},
number = {10},
pages = {1-14},
abstract = {LÂactivité portuaire joue un r^ole stratégique pour lÂéconomie nationale ou internationale et de nombreux ports réalisent des travaux de dragage conduisant `a lÂévacuation en mer de volumes importants de sédiments pour garantir lÂacc`es des chenaux, des Avants-Ports et des bassins `a la navigation commerciale. Ces pratiques sont indispensables aux activités portuaires pour la sécurité maritime ; néanmoins des préoccupations nouvelles basées sur la protection de lÂenvironnement montrent que certaines opérations posent probl`emes en regard des impacts potentiels sur les milieux aquatiques. Les sédiments portuaires sont des compartiments complexes chargés le cas échéant de contaminants qui ne permettent plus systématiquement dÂadopter le scénario classique de lÂimmersion pour évacuer les produits dragués compte tenu des risques de transfert des contaminants vers le milieu marin. Ces opérations doivent faire lÂobjet dÂévaluation des risques sur lÂenvironnement afin dÂapprécier les impacts potentiels et dÂétudier des scénarios alternatifs dans lÂhypoth`ese dÂune contamination excessive des sédiments `a draguer. LÂobjectif est donc de présenter notre démarche dÂexpertise basée sur lÂévaluation de la bioaccumulation des espéces marines fréquentant les zones dÂimmersion en rendant plus transparent le processus dÂévaluation environnementale qui peut influencer la méthode de mise en dep^ot et le pilotage des opérations de dragage dans un contexte de développement durable.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
LÂactivité portuaire joue un r^ole stratégique pour lÂéconomie nationale ou internationale et de nombreux ports réalisent des travaux de dragage conduisant `a lÂévacuation en mer de volumes importants de sédiments pour garantir lÂacc`es des chenaux, des Avants-Ports et des bassins `a la navigation commerciale. Ces pratiques sont indispensables aux activités portuaires pour la sécurité maritime ; néanmoins des préoccupations nouvelles basées sur la protection de lÂenvironnement montrent que certaines opérations posent probl`emes en regard des impacts potentiels sur les milieux aquatiques. Les sédiments portuaires sont des compartiments complexes chargés le cas échéant de contaminants qui ne permettent plus systématiquement dÂadopter le scénario classique de lÂimmersion pour évacuer les produits dragués compte tenu des risques de transfert des contaminants vers le milieu marin. Ces opérations doivent faire lÂobjet dÂévaluation des risques sur lÂenvironnement afin dÂapprécier les impacts potentiels et dÂétudier des scénarios alternatifs dans lÂhypoth`ese dÂune contamination excessive des sédiments `a draguer. LÂobjectif est donc de présenter notre démarche dÂexpertise basée sur lÂévaluation de la bioaccumulation des espéces marines fréquentant les zones dÂimmersion en rendant plus transparent le processus dÂévaluation environnementale qui peut influencer la méthode de mise en dep^ot et le pilotage des opérations de dragage dans un contexte de développement durable. |
2015Article de journal ER2 Auteurs : Thiery, Vincent; Rolin, Patrick; Dubois, Michel; Caumon, Marie-Camille Điscovery of metamorphic microdiamonds from the parautochthonous units of the Variscan French Massif Central Dans: Gondwana Research, vol. 28, no. 3, p. 954-960, 2015, (ACL). Résumé @article{THIE2015A,
title = {Điscovery of metamorphic microdiamonds from the parautochthonous units of the Variscan French Massif Central},
author = {Vincent Thiery and Patrick Rolin and Michel Dubois and Marie-Camille Caumon},
year = {2015},
date = {2015-01-01},
journal = {Gondwana Research},
volume = {28},
number = {3},
pages = {954-960},
abstract = {The Variscan French Massif Central (FMC) is classically described as a stack of nappes with increasing metamorphism from the bottom (parautochthonous unit) to the top (lower and upper gneiss units). Ultra-high pressure (UHP) metamorphism was already recognized in the uppermost units, with notably coesite-bearing rocks. We report the first finding of metamorphic microdiamonds in the parautochthonous unit, revealing that the UHP event affected the whole stack of nappes and also that the pressures reached are above what was previously expected, since the presence of diamond, according to the peak temperature estimates for this unit, indicates pressures of ca. 3 GPa (i.e. 100 km depth). At the scale of the FMC, this finding adds complexity to the established models. On a broader scale, this adds evidence of similarity between this part of the belt and other UHP Variscan terranes such as the Erzgebirge and the Bohemian Massif},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The Variscan French Massif Central (FMC) is classically described as a stack of nappes with increasing metamorphism from the bottom (parautochthonous unit) to the top (lower and upper gneiss units). Ultra-high pressure (UHP) metamorphism was already recognized in the uppermost units, with notably coesite-bearing rocks. We report the first finding of metamorphic microdiamonds in the parautochthonous unit, revealing that the UHP event affected the whole stack of nappes and also that the pressures reached are above what was previously expected, since the presence of diamond, according to the peak temperature estimates for this unit, indicates pressures of ca. 3 GPa (i.e. 100 km depth). At the scale of the FMC, this finding adds complexity to the established models. On a broader scale, this adds evidence of similarity between this part of the belt and other UHP Variscan terranes such as the Erzgebirge and the Bohemian Massif |
2015Article de journal ER2 Auteurs : Chafei, Sawsen; Khadraoui, Fouzia; Boutouil, Mohamed; Gomina, Moussa Effect of flax fibers treatments on the rheological and the mechanical behavior of a cement composite Dans: Construction and Building Materials, vol. 79, p. 229 - 235, 2015, ISSN: 0950-0618, (ACL). Liens @article{Sawsen2015229,
title = {Effect of flax fibers treatments on the rheological and the mechanical behavior of a cement composite},
author = {Sawsen Chafei and Fouzia Khadraoui and Mohamed Boutouil and Moussa Gomina},
url = {http://www.sciencedirect.com/science/article/pii/S0950061814013932},
doi = {http://dx.doi.org/10.1016/j.conbuildmat.2014.12.091},
issn = {0950-0618},
year = {2015},
date = {2015-01-01},
journal = {Construction and Building Materials},
volume = {79},
pages = {229 - 235},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER2 Auteurs : Zhao, Zengfeng; Rémond, Sébastien; Damidot, Denis; Xu, Weiya Influence of fine recycled concrete aggregates on the properties of mortars Dans: Construction and Building Materials, vol. 81, p. 179 - 186, 2015, ISSN: 0950-0618, (ACL). Liens @article{Zhao2015a,
title = {Influence of fine recycled concrete aggregates on the properties of mortars},
author = {Zengfeng Zhao and Sébastien Rémond and Denis Damidot and Weiya Xu},
url = {http://www.sciencedirect.com/science/article/pii/S0950061815001841},
doi = {http://dx.doi.org/10.1016/j.conbuildmat.2015.02.037},
issn = {0950-0618},
year = {2015},
date = {2015-01-01},
journal = {Construction and Building Materials},
volume = {81},
pages = {179 - 186},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER2 Auteurs : Wang, D; Abriak, Nor-Edine; Zentar, Rachid One-dimensional consolidation of lime-treated dredged harbour sediments Dans: European Journal of Environmental …, p. 199-218, 2015, (ACL). Liens @article{pop00035,
title = {One-dimensional consolidation of lime-treated dredged harbour sediments},
author = {D Wang and Nor-Edine Abriak and Rachid Zentar},
url = {https://www.tandfonline.com/doi/abs/10.1080/19648189.2014.939309},
doi = {https://doi.org/10.1080/19648189.2014.939309},
year = {2015},
date = {2015-01-01},
journal = {European Journal of Environmental …},
pages = {199-218},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER2 Auteurs : Abriak, Nor-Edine; Zentar, Rachid; A., Raouf; TN., Thanh Physicochemical Characterizations of Marine and River Sediments in the North of France Dans: International Journal of Marine and Environmental Sciences, vol. 9, no. 2, p. 124-128, 2015, (ACL). Liens @article{pop00168,
title = {Physicochemical Characterizations of Marine and River Sediments in the North of France},
author = {Nor-Edine Abriak and Rachid Zentar and Raouf A. and Thanh TN.},
url = {https://www.waset.org/Publications/Physicochemical-Characterizations-of-Marine-and-River-Sediments-in-the-North-of-France/10001056},
doi = {10.1999/1307-6892/10001056},
year = {2015},
date = {2015-01-01},
journal = {International Journal of Marine and Environmental Sciences},
volume = {9},
number = {2},
pages = {124-128},
publisher = {waset.org},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER2 Auteurs : Boukari, Younes; Bulteel, David; Rivard, Patrice; Abriak, Nor-Edine Combining nonlinear acoustics and physico-chemical analysis of aggregates to improve alkali–silica reaction monitoring Dans: Cement and Concrete Research, vol. 67, p. 44–51, 2015, (ACL). Liens @article{Boukari2015,
title = {Combining nonlinear acoustics and physico-chemical analysis of aggregates to improve alkali–silica reaction monitoring},
author = {Younes Boukari and David Bulteel and Patrice Rivard and Nor-Edine Abriak},
doi = {10.1016/j.cemconres.2014.08.005},
year = {2015},
date = {2015-01-01},
journal = {Cement and Concrete Research},
volume = {67},
pages = {44--51},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2015Conférence ER2 Auteurs : Alhaik, Ghaith; Ferreira, Michel; Dubois, Vincent; Wirquin, Eric; SébastienTilloy,; Monflier, Eric; Aouad, George Rheological and mechanical behavior of earth materials / starch mixes ICCBM, Clermont-Ferrand 2015, (ACTI). @conference{alhaik2015a,
title = {Rheological and mechanical behavior of earth materials / starch mixes},
author = {Ghaith Alhaik and Michel Ferreira and Vincent Dubois and Eric Wirquin and SébastienTilloy and Eric Monflier and George Aouad},
year = {2015},
date = {2015-00-01},
booktitle = {ICCBM},
organization = {Clermont-Ferrand},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER2 Auteurs : Dubois, Vincent; Wirquin, Eric; Flament, Cédric; Schmid, Christelle; Chartier, Thierry Re-use of quarry fines for the production of blocks ICCBM, Clermont-Ferrand 2015, (ACTI). @conference{DUBO2015A,
title = {Re-use of quarry fines for the production of blocks},
author = {Vincent Dubois and Eric Wirquin and Cédric Flament and Christelle Schmid and Thierry Chartier},
year = {2015},
date = {2015-00-01},
booktitle = {ICCBM},
organization = {Clermont-Ferrand},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2014Article de journal ER2 Auteurs : DIA, Moussa; J, RAMAROSON; Ange, NZIHOU; Zentar, Rachid; Abriak, Nor-Edine; G, DEPELSENAIRE; A, GERMEAU Effect of chemical and thermal treatment on the geotechnical properties of dredged sediment Dans: procedia engeeniering, vol. 83, p. 159-169, 2014, (ACL). Résumé | Liens @article{DIA2014A,
title = {Effect of chemical and thermal treatment on the geotechnical properties of dredged sediment},
author = {Moussa DIA and RAMAROSON J and NZIHOU Ange and Rachid Zentar and Nor-Edine Abriak and DEPELSENAIRE G and GERMEAU A},
doi = {doi:10.1016/j.proeng.2014.09.034},
year = {2014},
date = {2014-11-01},
journal = {procedia engeeniering},
volume = {83},
pages = {159-169},
abstract = {Dredging of sediments is necessary in order to maintain maritime activities and for flood prevention. However the increased industrial activities are causing accumulation of pollutants in the sediments. The main contaminants are heavy metals and organic compounds. Because of the cost of storage, treatment and valorization can be economically sound. This study focuses on the technology to treat heavy metals from dredged sediments using phosphoric acid (H3PO4) (the Novosol® process developed by Solvay company) with a goal to stabilize heavy metals by capturing them in calcium phosphate matrix and to destroy organic matter by calcination at 650 oC. Several studies have been conducted in this field. The stabilized materials obtained have been used in civil engineering. However these studies have never assessed the effect of the composition of the phosphoric acid on the treatment. In this paper the effect of two types of phosphoric acids with various composition and origins were compared. The investigation focuses on the effect of the phosphoric acids on the environmental behavior of metals and on the geotechnical properties of the dredged sediment.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Dredging of sediments is necessary in order to maintain maritime activities and for flood prevention. However the increased industrial activities are causing accumulation of pollutants in the sediments. The main contaminants are heavy metals and organic compounds. Because of the cost of storage, treatment and valorization can be economically sound. This study focuses on the technology to treat heavy metals from dredged sediments using phosphoric acid (H3PO4) (the Novosol® process developed by Solvay company) with a goal to stabilize heavy metals by capturing them in calcium phosphate matrix and to destroy organic matter by calcination at 650 oC. Several studies have been conducted in this field. The stabilized materials obtained have been used in civil engineering. However these studies have never assessed the effect of the composition of the phosphoric acid on the treatment. In this paper the effect of two types of phosphoric acids with various composition and origins were compared. The investigation focuses on the effect of the phosphoric acids on the environmental behavior of metals and on the geotechnical properties of the dredged sediment. |
2014Article de journal ER2 Auteurs : SOKOL, E V; KOKH, S N; VAPNIK, Yevgeny; Thiery, Vincent; KHORZHOVA, Sophia Natural analogs of belite sulfoaluminate cement clinkers from Negev Đesert, Israel Dans: American Mineralogist, vol. 99, no. 7, p. 1471-1487, 2014, (ACL). Résumé | Liens @article{SOKO2014B,
title = {Natural analogs of belite sulfoaluminate cement clinkers from Negev Đesert, Israel},
author = {E V SOKOL and S N KOKH and Yevgeny VAPNIK and Vincent Thiery and Sophia KHORZHOVA},
doi = {10.2138/am.2014.4704},
year = {2014},
date = {2014-11-01},
journal = {American Mineralogist},
volume = {99},
number = {7},
pages = {1471-1487},
abstract = {YeÂelimite-larnite rocks in the Hatrurim formation of the Negev Desert, Israel, are natural analogs of belite sulfoaluminate (BSA) cement clinkers. They have been produced by ultrahigh-temperature combustion metamorphism at ambient pressure of a calcareous sedimentary precursor. Their mineralogy consists of 35Â50 vol% ?-Ca2SiO4, 15Â20 vol% yeÂelimite, 7Â15 vol% ferrites, and 15Â20 vol% fluorapatite and/or fluorellestadite. A few grains of hatrurite (Ca3SiO5) and ??-Ca2SiO4 have been observed as well. The composition of ??- and ?-Ca2SiO4 polymorphs by EPMA are near Ca1.96Â1.98Na0.01Â0.02 Si0.96P0.03Al0.01O4, whereas yeÂelimite has an approximate composition by EPMA of Ca3.99Mg0.02Ba0.01Na0.02K0.02Al5.73Fe3+0.16Si0.10S0.97P0.02O16. The Al content of brownmillerite Ca2(Fe1?xAlx)2O5 ranges from x = 0.20Â0.27. Fe-analog of shulamitite (Ca3Fe2TiO8) contains up to 15.1 wt% TiO2. YeÂelimite-larnite rocks were derived from chalky sediments by burning of combustible gas with a Tmax at 1200Â1350 °C. The mineral content, microstructure, and texture/fabric of the yeÂelimite-larnite rocks imply that chalky and/or marly sediments with randomly distributed clay, phosphorite, and gypsum may be utilized as cheap naturally homogenized and pulverized mixtures for industrial production of BSA cement clinker, as an environment-friendly alternative to ordinary Portland cement (OPC).},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
YeÂelimite-larnite rocks in the Hatrurim formation of the Negev Desert, Israel, are natural analogs of belite sulfoaluminate (BSA) cement clinkers. They have been produced by ultrahigh-temperature combustion metamorphism at ambient pressure of a calcareous sedimentary precursor. Their mineralogy consists of 35Â50 vol% ?-Ca2SiO4, 15Â20 vol% yeÂelimite, 7Â15 vol% ferrites, and 15Â20 vol% fluorapatite and/or fluorellestadite. A few grains of hatrurite (Ca3SiO5) and ??-Ca2SiO4 have been observed as well. The composition of ??- and ?-Ca2SiO4 polymorphs by EPMA are near Ca1.96Â1.98Na0.01Â0.02 Si0.96P0.03Al0.01O4, whereas yeÂelimite has an approximate composition by EPMA of Ca3.99Mg0.02Ba0.01Na0.02K0.02Al5.73Fe3+0.16Si0.10S0.97P0.02O16. The Al content of brownmillerite Ca2(Fe1?xAlx)2O5 ranges from x = 0.20Â0.27. Fe-analog of shulamitite (Ca3Fe2TiO8) contains up to 15.1 wt% TiO2. YeÂelimite-larnite rocks were derived from chalky sediments by burning of combustible gas with a Tmax at 1200Â1350 °C. The mineral content, microstructure, and texture/fabric of the yeÂelimite-larnite rocks imply that chalky and/or marly sediments with randomly distributed clay, phosphorite, and gypsum may be utilized as cheap naturally homogenized and pulverized mixtures for industrial production of BSA cement clinker, as an environment-friendly alternative to ordinary Portland cement (OPC). |
2014Article de journal ER2 Auteurs : KIMBONGUILA, Adolphe; Rémond, Sébastien Điscrete element modeling of the microstructure of fine particle agglomerates in sheared dilute suspension Dans: Physica A, vol. 412, p. 66-83, 2014, (ACL). Résumé | Liens @article{KIMB2014a,
title = {Điscrete element modeling of the microstructure of fine particle agglomerates in sheared dilute suspension},
author = {Adolphe KIMBONGUILA and Sébastien Rémond},
doi = {doi.org/10.1016/j.physa.2014.06.023},
year = {2014},
date = {2014-10-01},
journal = {Physica A},
volume = {412},
pages = {66-83},
abstract = {The fragmentation and restructuring under shear of agglomerates of fine mineral particles are studied with the Distinct Element Method. The model used takes into account contact forces, van der Waals forces, and hydrodynamic forces computed with the free-draining approximation. A loose initial agglomerate is submitted to a constant shear rate until reaching a quasi-stationary state, where the number, size and structure of fragment of agglomerates can be considered as constant. The influence of shear stress and size of particles on the characteristics of agglomerates at equilibrium is studied. Fragmentation is controlled by a non-dimensional number, depending on the radius of the particles, shear rate and maximal adhesion force.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The fragmentation and restructuring under shear of agglomerates of fine mineral particles are studied with the Distinct Element Method. The model used takes into account contact forces, van der Waals forces, and hydrodynamic forces computed with the free-draining approximation. A loose initial agglomerate is submitted to a constant shear rate until reaching a quasi-stationary state, where the number, size and structure of fragment of agglomerates can be considered as constant. The influence of shear stress and size of particles on the characteristics of agglomerates at equilibrium is studied. Fragmentation is controlled by a non-dimensional number, depending on the radius of the particles, shear rate and maximal adhesion force. |
2014Conférence ER2 Auteurs : Tran, Thu Hien; Govin, Alexandre; Guyonnet, René; Grosseau, Philippe; Lors, Christine; Damidot, Denis; Deves, O; Ruot, Bernard An in-situ and laboratory study of the effect of the intrinsic properties of mortars on their potential bioreceptivity XIII International Conference on Durability of Building Materials and Components, Escola Politecnica, Universiy of S~ao Paulo and S~ao Paulo State Housing Syndicate S~ao Paulo, Portugal, 2014. Liens @conference{Tran2014a,
title = {An in-situ and laboratory study of the effect of the intrinsic properties of mortars on their potential bioreceptivity},
author = {Thu Hien Tran and Alexandre Govin and René Guyonnet and Philippe Grosseau and Christine Lors and Denis Damidot and O Deves and Bernard Ruot},
editor = {Marco Quattrone and Vanderley Moacyr John},
url = {http://hal-emse.ccsd.cnrs.fr/emse-01085050},
year = {2014},
date = {2014-09-01},
booktitle = {XIII International Conference on Durability of Building Materials and Components},
pages = {pp. 258 `a 265},
address = {S~ao Paulo, Portugal},
organization = {Escola Politecnica, Universiy of S~ao Paulo and S~ao Paulo State Housing Syndicate},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2014Article de journal ER2 Auteurs : SEBAIBI, N; Benzerzour, Mahfoud; Abriak, Nor-Edine Influence of the distribution and orientation of fibres in a reinforced concrete with waste fibres and powders Dans: Construction and bulding Materials, vol. 65, p. 254-263, 2014, (ACL). Résumé | Liens @article{SEBA2014A,
title = {Influence of the distribution and orientation of fibres in a reinforced concrete with waste fibres and powders},
author = {N SEBAIBI and Mahfoud Benzerzour and Nor-Edine Abriak},
doi = {doi:10.1016/j.conbuildmat.2014.04.134},
year = {2014},
date = {2014-08-01},
journal = {Construction and bulding Materials},
volume = {65},
pages = {254-263},
abstract = {This paper focuses on the incorporation of the sub-product materials based on the fibres and powders as used in the reinforcement of a cement matrix. These reinforcements (fibres and powders) were obtained from recycling by crushing of a thermoset composite based on unsaturated polyester/glass fibre. The mechanical and physical properties of Waste Fibre and Powder Reinforced Concrete (WFPRC) were investigated after optimising the composite. Regarding mechanical properties, the study focused on the effect of the volume of fibres and powders on the flexural, the uniaxial tensile strength and on different mixing energy. Regarding physical properties, the porosity, the orientation and distribution of fibres in a cement matrix were investigated. The results show that the tensile strength of WFPRC increased when both fibres and powders were added. The mixing energy influence strongly the fibres/powder content, the porosity, the distribution and fibres orientation regarding the loading direction of composite. However, the fibres distribution is an important factor for explain efficiency the mechanical behaviour of WFPRC. Fibre-orientation measurement by two-dimensional (2D) image analysis of polished cross-sections is a rapid and highly efficient method for determining the fibre orientation distribution over large sample areas. The results confirm that the rheology and fibre/powder content of concrete has an important influence on the orientation of the fibres and therefore the mechanical behaviour of composite reinforced fibres. The mixture reinforced with 4.4%, 6.2% and 11.54% of fibre/powder present an orientation coefficient ranging from 0.3 and 0.35 which indicate that the orientation of WFPRC is in 3D because the number of fibres is the same in three planes and confirm the poor workability of samples reinforced fibres.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
This paper focuses on the incorporation of the sub-product materials based on the fibres and powders as used in the reinforcement of a cement matrix. These reinforcements (fibres and powders) were obtained from recycling by crushing of a thermoset composite based on unsaturated polyester/glass fibre. The mechanical and physical properties of Waste Fibre and Powder Reinforced Concrete (WFPRC) were investigated after optimising the composite. Regarding mechanical properties, the study focused on the effect of the volume of fibres and powders on the flexural, the uniaxial tensile strength and on different mixing energy. Regarding physical properties, the porosity, the orientation and distribution of fibres in a cement matrix were investigated. The results show that the tensile strength of WFPRC increased when both fibres and powders were added. The mixing energy influence strongly the fibres/powder content, the porosity, the distribution and fibres orientation regarding the loading direction of composite. However, the fibres distribution is an important factor for explain efficiency the mechanical behaviour of WFPRC. Fibre-orientation measurement by two-dimensional (2D) image analysis of polished cross-sections is a rapid and highly efficient method for determining the fibre orientation distribution over large sample areas. The results confirm that the rheology and fibre/powder content of concrete has an important influence on the orientation of the fibres and therefore the mechanical behaviour of composite reinforced fibres. The mixture reinforced with 4.4%, 6.2% and 11.54% of fibre/powder present an orientation coefficient ranging from 0.3 and 0.35 which indicate that the orientation of WFPRC is in 3D because the number of fibres is the same in three planes and confirm the poor workability of samples reinforced fibres. |
2014Article de journal ER2 Auteurs : FORMOSA, Lionel; Damidot, Denis; Josette, CAMILLERI Mercury intrusion porosimetry and assessment of cement-dentin interface of anti-washout-type mineral trioxide aggregate Dans: Journal of Endodontics, vol. 40, no. 7, p. 958-903, 2014, (ACL). Résumé | Liens @article{FORM2014A,
title = {Mercury intrusion porosimetry and assessment of cement-dentin interface of anti-washout-type mineral trioxide aggregate},
author = {Lionel FORMOSA and Denis Damidot and CAMILLERI Josette},
doi = {10.1016/j.joen.2013.11.015},
year = {2014},
date = {2014-07-01},
journal = {Journal of Endodontics},
volume = {40},
number = {7},
pages = {958-903},
abstract = {Introduction
One of the disadvantages of mineral trioxide aggregate (MTA) is washout (ie, the tendency of freshly prepared cement paste to disintegrate upon early contact with physiological fluids). A novel MTA (MTA Plus; Prevest Denpro, Jammu City, India) exhibits low washout and superior physical properties when mixed with a gel instead of water. When used as a root-end filler, MTA is in contact with both bone and root dentin. This study aimed to investigate the porosity and interfacial characteristics of the novel MTA mixed with water or antiwashout gel.
Methods
Porosity was evaluated after 1 or 28 days of immersion in Hank's balanced salt solution using mercury intrusion porosimetry. The root dentin to material interface was investigated using a scanning electron microscope and energy-dispersive X-ray spectroscopy complete with line scans and elemental maps.
Results
AntiÂwashout-type MTA Plus was found to have lower initial porosity than MTA Plus mixed with water although this trend was reversed after 28 days of immersion in physiological fluid. Both materials exhibited good marginal adaptation. The diffusion of silicon, calcium, and phosphorus across the cement/dentin interface was observed.
Conclusions
MTA Plus mixed with antiwashout gel was found to have lower initial porosity than MTA Plus mixed with water. Both materials exhibited good marginal adaptation and the diffusion of silicon, calcium, and phosphorous across the cement/dentin interface. Thus, the antiÂwashout-type MTA can be considered to be a suitable substitute for ordinary MTA in all its indications.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Introduction
One of the disadvantages of mineral trioxide aggregate (MTA) is washout (ie, the tendency of freshly prepared cement paste to disintegrate upon early contact with physiological fluids). A novel MTA (MTA Plus; Prevest Denpro, Jammu City, India) exhibits low washout and superior physical properties when mixed with a gel instead of water. When used as a root-end filler, MTA is in contact with both bone and root dentin. This study aimed to investigate the porosity and interfacial characteristics of the novel MTA mixed with water or antiwashout gel.
Methods
Porosity was evaluated after 1 or 28 days of immersion in Hank's balanced salt solution using mercury intrusion porosimetry. The root dentin to material interface was investigated using a scanning electron microscope and energy-dispersive X-ray spectroscopy complete with line scans and elemental maps.
Results
AntiÂwashout-type MTA Plus was found to have lower initial porosity than MTA Plus mixed with water although this trend was reversed after 28 days of immersion in physiological fluid. Both materials exhibited good marginal adaptation. The diffusion of silicon, calcium, and phosphorus across the cement/dentin interface was observed.
Conclusions
MTA Plus mixed with antiwashout gel was found to have lower initial porosity than MTA Plus mixed with water. Both materials exhibited good marginal adaptation and the diffusion of silicon, calcium, and phosphorous across the cement/dentin interface. Thus, the antiÂwashout-type MTA can be considered to be a suitable substitute for ordinary MTA in all its indications. |
2014Article de journal ER2 Auteurs : Camilleri, J; Grech, L; Galea, K; Keir, D; Fenech, M; Formosa, L; Damidot, Denis; Mallia, B Porosity and root dentine to material interface assessment of calcium silicate-based root-end filling materials Dans: Clinical Oral Investigations, vol. 18, no. 5, p. 1437-1446, 2014, (ACL). Résumé | Liens @article{CAMI2014A,
title = {Porosity and root dentine to material interface assessment of calcium silicate-based root-end filling materials},
author = {J Camilleri and L Grech and K Galea and D Keir and M Fenech and L Formosa and Denis Damidot and B Mallia},
doi = {10.1007/s00784-013-1124-y},
year = {2014},
date = {2014-06-01},
journal = {Clinical Oral Investigations},
volume = {18},
number = {5},
pages = {1437-1446},
abstract = {Objectives
The aim of this study was to evaluate the porosity and assess the root dentine to material interface of four root-end filling materials based on tricalcium silicate cement using two microscopy techniques.
Methods
The porosity of Bioaggregate, Biodentine, a prototype radiopacified tricalcium silicate cement (TCS-20-Zr) and intermediate restorative material (IRM) was evaluated after immersion for 28 days in Hank's balanced salt solution (HBSS) using mercury intrusion porosimetry. The root dentine to material interface of the cements when used as root-end filling materials in extracted human teeth was assessed after 28 days of dry storage and immersion in HBSS using a confocal microscope together with fluorescent tracers and also a field emission gun scanning electron microscope.
Results
Biodentine and IRM exhibited the lowest level or degree of porosity. The confocal microscopy used in conjunction to fluorescent tracers demonstrated that dry storage resulted in gaps at the root dentine to material interface and also cracks in the material with Biodentine being the most affected. Zinc was shown to be present in root dentine adjacent to the IRM restorations.
Conclusions
Dry storage of Biodentine resulted in changes in the material microstructure and cracks at the root dentine to Biodentine interface. Furthermore, the gaps resulting from material shrinkage allowed the passage of the fluorescent microspheres thus indicating that these gaps are significant and can potentially allow the passage of micro-organisms.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Objectives
The aim of this study was to evaluate the porosity and assess the root dentine to material interface of four root-end filling materials based on tricalcium silicate cement using two microscopy techniques.
Methods
The porosity of Bioaggregate, Biodentine, a prototype radiopacified tricalcium silicate cement (TCS-20-Zr) and intermediate restorative material (IRM) was evaluated after immersion for 28 days in Hank's balanced salt solution (HBSS) using mercury intrusion porosimetry. The root dentine to material interface of the cements when used as root-end filling materials in extracted human teeth was assessed after 28 days of dry storage and immersion in HBSS using a confocal microscope together with fluorescent tracers and also a field emission gun scanning electron microscope.
Results
Biodentine and IRM exhibited the lowest level or degree of porosity. The confocal microscopy used in conjunction to fluorescent tracers demonstrated that dry storage resulted in gaps at the root dentine to material interface and also cracks in the material with Biodentine being the most affected. Zinc was shown to be present in root dentine adjacent to the IRM restorations.
Conclusions
Dry storage of Biodentine resulted in changes in the material microstructure and cracks at the root dentine to Biodentine interface. Furthermore, the gaps resulting from material shrinkage allowed the passage of the fluorescent microspheres thus indicating that these gaps are significant and can potentially allow the passage of micro-organisms. |
2014Article de journal ER2 Auteurs : Huang, Haoliang; Ye, Guang; Damidot, Denis Effect of blast furnace slag on self-healing of microcracks in cementitious materials Dans: Cement & Concrete Composites, vol. 60, p. 68-82, 2014, (ACL). Résumé | Liens @article{Huan2014A,
title = {Effect of blast furnace slag on self-healing of microcracks in cementitious materials},
author = {Haoliang Huang and Guang Ye and Denis Damidot},
doi = {10.1016/j.cemconres.2014.03.010},
year = {2014},
date = {2014-06-01},
journal = {Cement & Concrete Composites},
volume = {60},
pages = {68-82},
abstract = {The physico-chemical process of self-healing in blast furnace slag cement paste was investigated in this paper. With a high slag content i.e., 66% in cement paste and saturated Ca(OH)2 solution as activator, it was found that the reaction products formed in cracks are composed of Csingle bondSsingle bondH, ettringite, hydrogarnet and OHÂhydrotalcite. The fraction of Csingle bondSsingle bondH in the reaction products is much larger than the other minerals. Large amount of ettringite formed in cracks indicates the leaching of SO42 ? ions from the bulk paste and consequently the recrystallization. Self-healing proceeds fast within 50 h and then slows down. According to thermodynamic modeling, when the newly formed reaction products are carbonated, the filling fraction of crack increases first and then decreases. Low soluble minerals such as silica gel, gibbsite and calcite are formed. Compared to Portland cement paste, the potential of self-healing in slag cement paste is higher when the percentage of slag is high.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The physico-chemical process of self-healing in blast furnace slag cement paste was investigated in this paper. With a high slag content i.e., 66% in cement paste and saturated Ca(OH)2 solution as activator, it was found that the reaction products formed in cracks are composed of Csingle bondSsingle bondH, ettringite, hydrogarnet and OHÂhydrotalcite. The fraction of Csingle bondSsingle bondH in the reaction products is much larger than the other minerals. Large amount of ettringite formed in cracks indicates the leaching of SO42 ? ions from the bulk paste and consequently the recrystallization. Self-healing proceeds fast within 50 h and then slows down. According to thermodynamic modeling, when the newly formed reaction products are carbonated, the filling fraction of crack increases first and then decreases. Low soluble minerals such as silica gel, gibbsite and calcite are formed. Compared to Portland cement paste, the potential of self-healing in slag cement paste is higher when the percentage of slag is high. |
2014Article de journal ER2 Auteurs : Ducasse-Lapeyrusse, J; é, Gagn R; Lors, Christine; Damidot, Denis Ŧraitement de mortiers fissurés par biocicatrisation : vers une évaluationquantitative de lefficacité bactérienne Cracked mortars treatmentby biohealing: toward a quantitative assessment to the bacterialefficien Dans: Matériaux & Techniques, vol. 102, no. 1, p. 105-115, 2014, (ACL). Résumé | Liens @article{DUCA2014A,
title = {Ŧraitement de mortiers fissurés par biocicatrisation : vers une évaluationquantitative de lefficacité bactérienne Cracked mortars treatmentby biohealing: toward a quantitative assessment to the bacterialefficien},
author = {J Ducasse-Lapeyrusse and Gagn R é and Christine Lors and Denis Damidot},
doi = {10.1051/mattech/2014008},
year = {2014},
date = {2014-04-01},
journal = {Matériaux & Techniques},
volume = {102},
number = {1},
pages = {105-115},
abstract = {Pour accélérer le processus naturel dÂautocicatrisation et pour parvenir `a cicatriser compl`etement des fissures larges (>150 ?m), la biocicatrisation semble ^etre lÂun des moyens les plus prometteurs. LÂobjectif principal de cette recherche est de mieux comprendre les mécanismes de la biocicatrisation des matériaux cimentaires pour pouvoir accélérer la cinétique et maximiser lÂefficacité du colmatage des fissures relativement importantes. LÂapproche de biocicatrisation étudiée consiste `a imprégner les fissures `a lÂaide dÂun milieu de culture (milieu précurseur) inoculé avec une souche bactérienne spécifique. LÂobjectif de ce travail est dÂétudier la cicatrisation de micro-fissures bien définies sur des mortiers soumis `a des mécanismes de cicatrisation de plus en plus complexes. Dans un premier temps, les mortiers fissurés sont soumis `a lÂautocicatrisation naturelle, puis `a une solution de précurseur (lactate de calcium) et finalement `a un milieu de culture renfermant une souche bactérienne. Avant cette derni`ere étape, une part importante de lÂétude vise `a évaluer la cinétique de croissance de la souche bactérienne utilisée : Bacillus pseudofirmus. Des éprouvettes de mortier (E/C = 0,485) ont été soumises `a une fissuration contr^olée `a lÂaide dÂun coeur expansif. La cinétique de cicatrisation est évaluée `a lÂaide dÂune cellule de perméabilité `a lÂair qui permet de mesurer lÂévolution, au cours du temps (1, 3 et 6 mois de conservation `a 23 °C et 100 % H.R.) de lÂouverture apparente des fissures. La cicatrisation est globalement plus rapide et plus compl`ete lorsque les fissures sont imprégnées dÂune solution de lactate de calcium immédiatement apr`es la fissuration. CÂest principalement la cicatrisation des grosses fissures (>150 ?m) qui est nettement meilleure en présence du précurseur. Toutes les surfaces internes des fissures imprégnées de lactate de calcium sont enti`erement recouvertes dÂettringite. B. pseudofirmus est capable de se développer dans des milieux ayant un pH compris entre 7,5 et 10,6. Cette gamme de pH correspond au pH dÂun béton de surface carbonaté/lixivié mais aussi du béton dÂune fissure qui a commencé `a ^etre autocicatrisée. Cette souche est capable dÂutiliser le lactate de calcium comme source carbonée, mais nécessite la présence dÂun autre substrat nutritif comme lÂextrait de levure ou le milieu Nutrient Broth. Ces résultats constituent les bases nécessaires au développement dÂune méthodologie de biocicatrisation de mortiers fissurés.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Pour accélérer le processus naturel dÂautocicatrisation et pour parvenir `a cicatriser compl`etement des fissures larges (>150 ?m), la biocicatrisation semble ^etre lÂun des moyens les plus prometteurs. LÂobjectif principal de cette recherche est de mieux comprendre les mécanismes de la biocicatrisation des matériaux cimentaires pour pouvoir accélérer la cinétique et maximiser lÂefficacité du colmatage des fissures relativement importantes. LÂapproche de biocicatrisation étudiée consiste `a imprégner les fissures `a lÂaide dÂun milieu de culture (milieu précurseur) inoculé avec une souche bactérienne spécifique. LÂobjectif de ce travail est dÂétudier la cicatrisation de micro-fissures bien définies sur des mortiers soumis `a des mécanismes de cicatrisation de plus en plus complexes. Dans un premier temps, les mortiers fissurés sont soumis `a lÂautocicatrisation naturelle, puis `a une solution de précurseur (lactate de calcium) et finalement `a un milieu de culture renfermant une souche bactérienne. Avant cette derni`ere étape, une part importante de lÂétude vise `a évaluer la cinétique de croissance de la souche bactérienne utilisée : Bacillus pseudofirmus. Des éprouvettes de mortier (E/C = 0,485) ont été soumises `a une fissuration contr^olée `a lÂaide dÂun coeur expansif. La cinétique de cicatrisation est évaluée `a lÂaide dÂune cellule de perméabilité `a lÂair qui permet de mesurer lÂévolution, au cours du temps (1, 3 et 6 mois de conservation `a 23 °C et 100 % H.R.) de lÂouverture apparente des fissures. La cicatrisation est globalement plus rapide et plus compl`ete lorsque les fissures sont imprégnées dÂune solution de lactate de calcium immédiatement apr`es la fissuration. CÂest principalement la cicatrisation des grosses fissures (>150 ?m) qui est nettement meilleure en présence du précurseur. Toutes les surfaces internes des fissures imprégnées de lactate de calcium sont enti`erement recouvertes dÂettringite. B. pseudofirmus est capable de se développer dans des milieux ayant un pH compris entre 7,5 et 10,6. Cette gamme de pH correspond au pH dÂun béton de surface carbonaté/lixivié mais aussi du béton dÂune fissure qui a commencé `a ^etre autocicatrisée. Cette souche est capable dÂutiliser le lactate de calcium comme source carbonée, mais nécessite la présence dÂun autre substrat nutritif comme lÂextrait de levure ou le milieu Nutrient Broth. Ces résultats constituent les bases nécessaires au développement dÂune méthodologie de biocicatrisation de mortiers fissurés. |
2014Article de journal ER2 Auteurs : Rémond, Sébastien; Pizette, Patrick A DEM hard-core soft-shell model for the simulation of concrete flow Dans: Cement and Concrete Research, vol. 58, p. 169-178, 2014, (ACL). Résumé | Liens @article{REMO2014A,
title = {A DEM hard-core soft-shell model for the simulation of concrete flow},
author = {Sébastien Rémond and Patrick Pizette},
doi = {Rheology (A); Fresh concrete (A); Modelling (E); DEM},
year = {2014},
date = {2014-04-01},
journal = {Cement and Concrete Research},
volume = {58},
pages = {169-178},
abstract = {A new DEM model for the simulation of concrete flow is presented. Fresh concrete is described as an assembly of composite particles made of spherical hard grains representing coarse aggregates surrounded by concentric spherical layers representing mortar. Two kinds of simulations are carried out: rheological simulations performed in a Couette geometry and slump test simulations. Rheological simulations show that the rheological behaviour of simulated concretes can be approximated with the Bingham model. The force model used allows for a direct relation between rheological characteristics of the mortar and rheological characteristics of the simulated concrete. Slump test simulations show that the model is able to describe the shape of concrete during the flow. The yield stresses and viscosities of numerical concretes are then calculated from the slump values and slump times with equations of the literature.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
A new DEM model for the simulation of concrete flow is presented. Fresh concrete is described as an assembly of composite particles made of spherical hard grains representing coarse aggregates surrounded by concentric spherical layers representing mortar. Two kinds of simulations are carried out: rheological simulations performed in a Couette geometry and slump test simulations. Rheological simulations show that the rheological behaviour of simulated concretes can be approximated with the Bingham model. The force model used allows for a direct relation between rheological characteristics of the mortar and rheological characteristics of the simulated concrete. Slump test simulations show that the model is able to describe the shape of concrete during the flow. The yield stresses and viscosities of numerical concretes are then calculated from the slump values and slump times with equations of the literature. |
2014Article de journal ER2 Auteurs : Moundoungou, I; Bulteel, David; Garcia-Diaz, E; Thiery, Vincent; é, P D; Hammerschlag, J G Reduction of ASR expansion in concretes based on reactive chert aggregates: Effect of alkali neutralisation capacity Dans: Construction and Building Materials, vol. 54, p. 147Â162, 2014, (ACL). Résumé | Liens @article{MOUN2014B,
title = {Reduction of ASR expansion in concretes based on reactive chert aggregates: Effect of alkali neutralisation capacity},
author = {I Moundoungou and David Bulteel and E Garcia-Diaz and Vincent Thiery and P D é and J G Hammerschlag},
doi = {doi.org/10.1016/j.conbuildmat.2013.12.036},
year = {2014},
date = {2014-03-01},
journal = {Construction and Building Materials},
volume = {54},
pages = {147Â162},
abstract = {Previous studies on concretes based on reactive chert aggregates recognised that for a fixed amount of alkali, there is a reactive silica content that induces maximal expansion due to the alkaliÂsilica reaction (ASR). Beyond this critical point called the ÂpessimumÂ, the ASR expansion decreases. The various theories proposed to explain this phenomenon are not all in agreement and do not explore sufficiently the possibility of using the pessimum effect for the implementation of concretes with low ASR expansion. The objective of the present work was to consider the reduction of ASR expansion according to a pessimum effect and its relationship with the evolution of local alkali contents in silica grain. An accelerated expansion test was performed at 60 °C and 100% relative humidity (RH) on the concrete mixture based on reactive chert aggregates. The relative longitudinal variations of the prisms (DL/L) were measured over 24 weeks and microstructural studies were conducted on the samples tested. The results showed that the increase in reactive aggregate proportion allowed the reduction of the alkaliÂsilica reaction (ASR) expansion. This expansion reduction, attributed to a pessimum effect, could be used to prevent risk of ASR expansion in the concretes made with potentially reactive aggregates. The phenomenon of reduction of the expansion was explained in this paper by the capacity of reactive siliceous phases in the aggregates to fix alkali ions up to a certain threshold without being degraded. This neutralising capacity was identified thanks to EDS analyses by monitoring the increasing of the height of alkali peaks according to the microstructural degradation. Indeed, at the microstructural scale, two area types were identified to be major in the less expansive mixture: 1/undegraded areas which predominate, showed no detection of sodium, potassium and calcium as it appeared for the raw materials (degree 0). 2/areas in which signs of low degradation appeared were characterised by a slight increasing of alkali signals (degree 1). In contrast, in expansive mixture the alkali signal intensities were higher for the most degraded zones (degrees 2 and 3). The neutralisation process, induced by mixing concrete with both coarse and fine chert aggregates, is so dominant that the Âlocal alkali threshold causing the reaction is rarely exceeded, and expansions are below the standard limit. In terms of application, knowledge of the alkali threshold may help to verify the effectiveness of fixing harmful alkalis in the granular skeleton and could allow optimising the future concrete mixtures.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Previous studies on concretes based on reactive chert aggregates recognised that for a fixed amount of alkali, there is a reactive silica content that induces maximal expansion due to the alkaliÂsilica reaction (ASR). Beyond this critical point called the ÂpessimumÂ, the ASR expansion decreases. The various theories proposed to explain this phenomenon are not all in agreement and do not explore sufficiently the possibility of using the pessimum effect for the implementation of concretes with low ASR expansion. The objective of the present work was to consider the reduction of ASR expansion according to a pessimum effect and its relationship with the evolution of local alkali contents in silica grain. An accelerated expansion test was performed at 60 °C and 100% relative humidity (RH) on the concrete mixture based on reactive chert aggregates. The relative longitudinal variations of the prisms (DL/L) were measured over 24 weeks and microstructural studies were conducted on the samples tested. The results showed that the increase in reactive aggregate proportion allowed the reduction of the alkaliÂsilica reaction (ASR) expansion. This expansion reduction, attributed to a pessimum effect, could be used to prevent risk of ASR expansion in the concretes made with potentially reactive aggregates. The phenomenon of reduction of the expansion was explained in this paper by the capacity of reactive siliceous phases in the aggregates to fix alkali ions up to a certain threshold without being degraded. This neutralising capacity was identified thanks to EDS analyses by monitoring the increasing of the height of alkali peaks according to the microstructural degradation. Indeed, at the microstructural scale, two area types were identified to be major in the less expansive mixture: 1/undegraded areas which predominate, showed no detection of sodium, potassium and calcium as it appeared for the raw materials (degree 0). 2/areas in which signs of low degradation appeared were characterised by a slight increasing of alkali signals (degree 1). In contrast, in expansive mixture the alkali signal intensities were higher for the most degraded zones (degrees 2 and 3). The neutralisation process, induced by mixing concrete with both coarse and fine chert aggregates, is so dominant that the Âlocal alkali threshold causing the reaction is rarely exceeded, and expansions are below the standard limit. In terms of application, knowledge of the alkali threshold may help to verify the effectiveness of fixing harmful alkalis in the granular skeleton and could allow optimising the future concrete mixtures. |
2014Article de journal ER2 Auteurs : Chafei, Sawsen; Khadraoui, Fouzia; Boutouil, Mohamed; Gomina, Moussa Optimizing the formulation of flax fiber-reinforced cement composites Dans: Construction and Building Materials, vol. 54, p. 659-664, 2014. Liens @article{chafei:hal-03545724b,
title = {Optimizing the formulation of flax fiber-reinforced cement composites},
author = {Sawsen Chafei and Fouzia Khadraoui and Mohamed Boutouil and Moussa Gomina},
url = {https://hal.archives-ouvertes.fr/hal-03545724},
doi = {10.1016/j.conbuildmat.2013.12.038},
year = {2014},
date = {2014-03-01},
urldate = {2014-03-01},
journal = {Construction and Building Materials},
volume = {54},
pages = {659-664},
publisher = {Elsevier},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER2 Auteurs : Achour, Raouf; Abriak, Nor-Edine; Zentar, Rachid; Rivard, Patrice; Gregoire, Pascal Valorization of unauthorized sea disposal dredged sediments as a road foundation material Dans: Environmental Technology, vol. 35, no. 16, p. 1997-2007, 2014, (ACL). Résumé | Liens @article{Acho2014,
title = {Valorization of unauthorized sea disposal dredged sediments as a road foundation material},
author = {Raouf Achour and Nor-Edine Abriak and Rachid Zentar and Patrice Rivard and Pascal Gregoire},
doi = {10.1080/09593330.2014.889758},
year = {2014},
date = {2014-03-01},
journal = {Environmental Technology},
volume = {35},
number = {16},
pages = {1997-2007},
abstract = {The main objective of this study is to show the ability of fine dredged material (mainly silty material) to be used in road construction project. This paper is divided into three parts. In the first part, the physical, the mineralogical and the mechanical characteristics of the used fine dredged sediments, as well as their chemical composition and environmental impacts are presented. In the second part, the methodology developed to design the road made from dredged fine sediment is developed. The third part of the paper focuses on the presentation of the road construction and the interpretation of analyses made on cores drilled samples from the road and measurements of the deflection of the road. The environmental assessment, based on leaching tests, is also performed at different issues.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The main objective of this study is to show the ability of fine dredged material (mainly silty material) to be used in road construction project. This paper is divided into three parts. In the first part, the physical, the mineralogical and the mechanical characteristics of the used fine dredged sediments, as well as their chemical composition and environmental impacts are presented. In the second part, the methodology developed to design the road made from dredged fine sediment is developed. The third part of the paper focuses on the presentation of the road construction and the interpretation of analyses made on cores drilled samples from the road and measurements of the deflection of the road. The environmental assessment, based on leaching tests, is also performed at different issues. |
2014Article de journal ER2 Auteurs : AZRAR,; Abriak, Nor-Edine; Zentar, Rachid CARACTERISATION PHYSICO-CHIMIQUE ET ENVIRONNEMENTALE DES SEDIMENTS MARINS DRAGUES AU SUD DE LA FRANCE Dans: JOURNAL OF CATALYTIC MATERIALS ENVIRONMENT, vol. 11, p. 29-34, 2014, (ACL). @article{AZRA2014A,
title = {CARACTERISATION PHYSICO-CHIMIQUE ET ENVIRONNEMENTALE DES SEDIMENTS MARINS DRAGUES AU SUD DE LA FRANCE},
author = {AZRAR and Nor-Edine Abriak and Rachid Zentar},
year = {2014},
date = {2014-03-01},
journal = {JOURNAL OF CATALYTIC MATERIALS ENVIRONMENT},
volume = {11},
pages = {29-34},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER2 Auteurs : Benzerzour, Mahfoud; R., GAGNE; Abriak, Nor-Edine; N., SEBAIBI Experimental and numerical study of the structural and cracking behavior of an overlaid slab panel under cyclic flexural loading. Dans: Construction and bulding Materials, vol. 52, p. 24-32, 2014, (ACL). Résumé | Liens @article{BENZ2014B,
title = {Experimental and numerical study of the structural and cracking behavior of an overlaid slab panel under cyclic flexural loading.},
author = {Mahfoud Benzerzour and GAGNE R. and Nor-Edine Abriak and SEBAIBI N.},
doi = {doi:10.1016/j.conbuildmat.2013.11.038},
year = {2014},
date = {2014-02-01},
journal = {Construction and bulding Materials},
volume = {52},
pages = {24-32},
abstract = {This paper presents an investigation on the origin and magnitude of the internal stresses at the interface between an overlay and an underlying reinforced-concrete slab subjected to cyclic flexural loading. Internal stresses were analyzed with finite-element modeling of two configurations of reinforced-concrete slab panels measuring 3.3 Ã 1.0 Ã 0.2 m: an intact reference slab and a repaired slab with a 40-mm-thick bonded overlay. The research project included experimental testing to measure the evolution of the structural capacity and the cracking behavior of two slab panels with the same configuration and dimensions. Under laboratory cyclic loading, the overlaid slab panel showed some fine horizontal cracks progressing along the interface between the overlay and the substrate slab. The finite-element modeling revealed that the flexural crack pattern significantly impacted the stress field near the overlay interface. Flexural cracking generated stress perpendicular to the interface (normal) in the area located near the flexural crack. The magnitude of the normal stress at the interface increased with bending moment. This can produce local debonding at the overlay interface located near a flexural crack. Cyclic loading was found to promote this possible interface cracking mechanism resulting from fatigue rupture of the bond between the overlay and substrate.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
This paper presents an investigation on the origin and magnitude of the internal stresses at the interface between an overlay and an underlying reinforced-concrete slab subjected to cyclic flexural loading. Internal stresses were analyzed with finite-element modeling of two configurations of reinforced-concrete slab panels measuring 3.3 Ã 1.0 Ã 0.2 m: an intact reference slab and a repaired slab with a 40-mm-thick bonded overlay. The research project included experimental testing to measure the evolution of the structural capacity and the cracking behavior of two slab panels with the same configuration and dimensions. Under laboratory cyclic loading, the overlaid slab panel showed some fine horizontal cracks progressing along the interface between the overlay and the substrate slab. The finite-element modeling revealed that the flexural crack pattern significantly impacted the stress field near the overlay interface. Flexural cracking generated stress perpendicular to the interface (normal) in the area located near the flexural crack. The magnitude of the normal stress at the interface increased with bending moment. This can produce local debonding at the overlay interface located near a flexural crack. Cyclic loading was found to promote this possible interface cracking mechanism resulting from fatigue rupture of the bond between the overlay and substrate. |
2014Article de journal ER2 Auteurs : Wang, Dongxing; Abriak, Nor-Edine; Zentar, Rachid One-dimensional consolidation of lime-treated dredged Ħarbour sediments Dans: European Journal of Environmental and Civil Engineering, vol. 19, no. 2, p. 199-218, 2014, (ACL). Résumé | Liens @article{WANG2014A,
title = {One-dimensional consolidation of lime-treated dredged Ħarbour sediments},
author = {Dongxing Wang and Nor-Edine Abriak and Rachid Zentar},
doi = {doi.org/10.1080/19648189.2014.939309},
year = {2014},
date = {2014-02-01},
journal = {European Journal of Environmental and Civil Engineering},
volume = {19},
number = {2},
pages = {199-218},
abstract = {Dunkirk marine sediments can be used as an alternative roadbed material, and a full-scale test road using this has been successfully built at Dunkirk harbour in France. In this context, the long-term deformation behaviour of Dunkirk sediments is of crucial importance in the evaluation of roadbed deformation. The standard oedometer tests were carried out to plot the e-log?? and e-logt curves, which were used to determine the compression index (Cc), swelling index (Cs) and coefficient of secondary compression C? during loading and unloading. The effect of lime treatment on primary and secondary compression behaviour was investigated. The soil structure influences greatly the yield consolidation stress ?y?, which is increased with lime content. Both ?y?Âey (void ratio at ?y?) and CcÂCs relations are analysed. It is observed that ?y? is connected with ey by a power function and Cc/Cs varies between 0.013 and 0.1. C? remains low at consolidation stress ???<??y? and reaches a peak at ???=?(1?Â?4) ?y? followed by a decrease in C?. Lime addition induces the peak C? moving towards a larger consolidation stress of 5?y?. Based on the C?Âlg(t/tp) curves, it is interesting to note that t?=?20tp (end-of-primary consolidation time) is suggested as a sufficient consolidation time to study the secondary compression behaviour of marine sediments. The C?/Cc ratios of various clays including Dunkirk sediments show that C?/Cc changes mainly in the range of 0.02Â0.05. However, the C?/Cc ratio is different for lime-treated sediments (C?/Cc*?=?0.0164) and untreated sediments (C?/Cc*?=?0.0432). Two separate zones in C?ÂCs* plot are clearly observed for untreated and treated sediments with boundary line of C??=?0.0433Cs*?Â?0.0008.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Dunkirk marine sediments can be used as an alternative roadbed material, and a full-scale test road using this has been successfully built at Dunkirk harbour in France. In this context, the long-term deformation behaviour of Dunkirk sediments is of crucial importance in the evaluation of roadbed deformation. The standard oedometer tests were carried out to plot the e-log?? and e-logt curves, which were used to determine the compression index (Cc), swelling index (Cs) and coefficient of secondary compression C? during loading and unloading. The effect of lime treatment on primary and secondary compression behaviour was investigated. The soil structure influences greatly the yield consolidation stress ?y?, which is increased with lime content. Both ?y?Âey (void ratio at ?y?) and CcÂCs relations are analysed. It is observed that ?y? is connected with ey by a power function and Cc/Cs varies between 0.013 and 0.1. C? remains low at consolidation stress ???<??y? and reaches a peak at ???=?(1?Â?4) ?y? followed by a decrease in C?. Lime addition induces the peak C? moving towards a larger consolidation stress of 5?y?. Based on the C?Âlg(t/tp) curves, it is interesting to note that t?=?20tp (end-of-primary consolidation time) is suggested as a sufficient consolidation time to study the secondary compression behaviour of marine sediments. The C?/Cc ratios of various clays including Dunkirk sediments show that C?/Cc changes mainly in the range of 0.02Â0.05. However, the C?/Cc ratio is different for lime-treated sediments (C?/Cc*?=?0.0164) and untreated sediments (C?/Cc*?=?0.0432). Two separate zones in C?ÂCs* plot are clearly observed for untreated and treated sediments with boundary line of C??=?0.0433Cs*?Â?0.0008. |
2014Manuel technique ER2 Auteurs : Benzerzour, Mahfoud Đétermination en laboratoire du coefficient de perméabilité à saturation dun matériau : Perméamètre à paroi, flexible à gradient hydraulique constan AFNOR, 2014, (OS). @manual{BENZ2014a,
title = {Đétermination en laboratoire du coefficient de perméabilité à saturation dun matériau : Perméamètre à paroi, flexible à gradient hydraulique constan},
author = {Mahfoud Benzerzour},
year = {2014},
date = {2014-01-01},
edition = {AFNOR},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {manual}
}
|
2014Article de journal ER2 Auteurs : Benzerzour, Mahfoud; Maherzi, Walid; Abriak, Nor-Edine; Boutouil, M Road materialÂs design based on marine dredging sediment and sand, treated with hydraulic road binder Dans: Journal of Catalytic Materials and Environment, vol. 11, p. 9-14, 2014, (ACL). Résumé @article{BENZ2014D,
title = {Road materialÂs design based on marine dredging sediment and sand, treated with hydraulic road binder},
author = {Mahfoud Benzerzour and Walid Maherzi and Nor-Edine Abriak and M Boutouil},
year = {2014},
date = {2014-01-01},
journal = {Journal of Catalytic Materials and Environment},
volume = {11},
pages = {9-14},
abstract = {Afin de garantir un tirant dÂeau suffisant pour lÂexploitation des infrastru ctures portuaires et des voies navigables, les gestionnaires de ces derniers sont amenés `a effectuer réguli`erement des opérations dÂentretien qui consistent `a draguer dÂimportantes quantités de sédiments. En France, les volumes issus des opérations de drag age représentent chaque année des volumes tr`es important ou leur gestion devient de plus en plus complexe. Le principale objectif de ce travail de recherche est de formuler un nouveau matériau `a base de sédiments de dragage marins et de sable de dragage, e n utilisant différents liants et en variant leurs pourcentages. Le choix optimisé du liant hydraulique (proportion de CaO et de SiO 2 ) et du pourcentage dÂajouts granulaires (amélioration de la compacité) nous ont permis dÂobtenir des résistances optimales pour une application en techniques routi`ere.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Afin de garantir un tirant dÂeau suffisant pour lÂexploitation des infrastru ctures portuaires et des voies navigables, les gestionnaires de ces derniers sont amenés `a effectuer réguli`erement des opérations dÂentretien qui consistent `a draguer dÂimportantes quantités de sédiments. En France, les volumes issus des opérations de drag age représentent chaque année des volumes tr`es important ou leur gestion devient de plus en plus complexe. Le principale objectif de ce travail de recherche est de formuler un nouveau matériau `a base de sédiments de dragage marins et de sable de dragage, e n utilisant différents liants et en variant leurs pourcentages. Le choix optimisé du liant hydraulique (proportion de CaO et de SiO 2 ) et du pourcentage dÂajouts granulaires (amélioration de la compacité) nous ont permis dÂobtenir des résistances optimales pour une application en techniques routi`ere. |
2014Article de journal ER2 Auteurs : Benzerzour, Mahfoud; Raed, MANSI; Abriak, Nor-Edine Mathematical model to manage the sedimentÂs decontamination for beneficial us Dans: Journal of Catalytic Materials and Environment, vol. 12, p. 1-6, 2014, (ACL). @article{BENZ2014C,
title = {Mathematical model to manage the sedimentÂs decontamination for beneficial us},
author = {Mahfoud Benzerzour and MANSI Raed and Nor-Edine Abriak},
year = {2014},
date = {2014-01-01},
journal = {Journal of Catalytic Materials and Environment},
volume = {12},
pages = {1-6},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER2 Auteurs : KASMI, Abdelhafid; Benzerzour, Mahfoud; Abriak, Nor-Edine; MAHERZI, Walid Study of physico-chemical and environmental characterization of raw sediment and dehydrated sediment by the addition of a flocculent Dans: Journal of Catalytic Materials and Environment, vol. 12, 2014, (ACTI). @article{KASM2014A,
title = {Study of physico-chemical and environmental characterization of raw sediment and dehydrated sediment by the addition of a flocculent},
author = {Abdelhafid KASMI and Mahfoud Benzerzour and Nor-Edine Abriak and Walid MAHERZI},
year = {2014},
date = {2014-01-01},
journal = {Journal of Catalytic Materials and Environment},
volume = {12},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Manuel technique ER2 Auteurs : Lors, Christine; MAMINDY-PAJANY, Yannick Bioremediation of heavy metals in sediments. In: Bioremediation: Processes, Challenges and Future Prospects. Jesus Bern, 2014, (OS). Résumé @manual{MAMI2014A,
title = {Bioremediation of heavy metals in sediments. In: Bioremediation: Processes, Challenges and Future Prospects.},
author = {Christine Lors and Yannick MAMINDY-PAJANY},
year = {2014},
date = {2014-01-01},
edition = {Jesus Bern},
abstract = {This book presents state-of-the-art research on bioremediation, which is understood as a discipline that uses organisms or their products to reduce or eliminate the adverse effects of pollutants in the environment. Today, there are many research groups that focus on remedying the adverse effects of our industrialized society, which release compounds daily, increasingly polluting the environment. This book compiles the most important work of distinguished scientists around the world who are at the vanguard in this discipline, covering the environments of soil and water, as well as a great variety of microorganisms and mechanism bioremediators. Thus, the bioremediation strategy and bioremediator should be chosen according to the pollutant. This material is one of the few available for discussion in literature, and the authors and editorial board hope that this book can be used as a guide or as a base material useful for people who want to develop or apply new strategies in the bioremediation field. The book consists of the following sections: 1) bacterial bioremediation, 2) microbioremediation, 3) phyto- and phycoremediation, 4) composite bioremediation and finally 5) derivative bioremediation. Each section is disposed depending on the kind and type of pollutant; inorganic or organic; and by the complexity of organic mixtures. Studies include in silico, in vitro, in situ, ex situ approaches, from mathematical models to real landscape cases, including analytical methods to assess bioremediation efficacy and the biotechnological use of rhamnolipids, acetogenins, surfactants, micro-bubbles, agricultural residues and enzymes to improve or achieve bioremediation. This book is intended to provide tools to readers in order to apply or to understand the feasibility, advances, advantages, disadvantages, aspects, processes, challenges and future prospects in bioremediation. (Imprint: Nova)},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {manual}
}
This book presents state-of-the-art research on bioremediation, which is understood as a discipline that uses organisms or their products to reduce or eliminate the adverse effects of pollutants in the environment. Today, there are many research groups that focus on remedying the adverse effects of our industrialized society, which release compounds daily, increasingly polluting the environment. This book compiles the most important work of distinguished scientists around the world who are at the vanguard in this discipline, covering the environments of soil and water, as well as a great variety of microorganisms and mechanism bioremediators. Thus, the bioremediation strategy and bioremediator should be chosen according to the pollutant. This material is one of the few available for discussion in literature, and the authors and editorial board hope that this book can be used as a guide or as a base material useful for people who want to develop or apply new strategies in the bioremediation field. The book consists of the following sections: 1) bacterial bioremediation, 2) microbioremediation, 3) phyto- and phycoremediation, 4) composite bioremediation and finally 5) derivative bioremediation. Each section is disposed depending on the kind and type of pollutant; inorganic or organic; and by the complexity of organic mixtures. Studies include in silico, in vitro, in situ, ex situ approaches, from mathematical models to real landscape cases, including analytical methods to assess bioremediation efficacy and the biotechnological use of rhamnolipids, acetogenins, surfactants, micro-bubbles, agricultural residues and enzymes to improve or achieve bioremediation. This book is intended to provide tools to readers in order to apply or to understand the feasibility, advances, advantages, disadvantages, aspects, processes, challenges and future prospects in bioremediation. (Imprint: Nova) |
2014Article de journal ER2 Auteurs : Thiery, Vincent Le district minier et les anciennes mines d antimoine de Merinchal (Creuse) Dans: Le cahier des micromonteurs, vol. 123, no. 1, p. 1-8, 2014, (SCL). @article{THIE2014A,
title = {Le district minier et les anciennes mines d antimoine de Merinchal (Creuse)},
author = {Vincent Thiery},
year = {2014},
date = {2014-01-01},
journal = {Le cahier des micromonteurs},
volume = {123},
number = {1},
pages = {1-8},
note = {SCL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER2 Auteurs : Thiery, Vincent Characterization of fibrous mimetite Dans: Microscopy and Microanalysis, vol. 20, no. 2, p. 596-601, 2014, (ACL). @article{THIE2014B,
title = {Characterization of fibrous mimetite},
author = {Vincent Thiery},
year = {2014},
date = {2014-01-01},
journal = {Microscopy and Microanalysis},
volume = {20},
number = {2},
pages = {596-601},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER2 Auteurs : Thiery, Vincent La tourmaline des Lartault et Naudiots, Marmagne (Saône et Loire) Dans: Le r`egne minéral, no. 115, p. 41-42, 2014, (ACL). @article{THIE2014D,
title = {La tourmaline des Lartault et Naudiots, Marmagne (Saône et Loire)},
author = {Vincent Thiery},
year = {2014},
date = {2014-01-01},
journal = {Le r`egne minéral},
number = {115},
pages = {41-42},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Conférence ER2 Auteurs : Thiery, Vincent; Damidot, Denis; Sokol, E; Kokh, S-N Ħydration properties of natural cementitious phases bearing rocks 36th meeting of the International Cement Microscopy Association, Milano, 2014, (ACTI). @conference{THIE2014C,
title = {Ħydration properties of natural cementitious phases bearing rocks},
author = {Vincent Thiery and Denis Damidot and E Sokol and S-N Kokh},
year = {2014},
date = {2014-01-01},
booktitle = {36th meeting of the International Cement Microscopy Association},
address = {Milano},
note = {ACTI},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2014Article de journal ER2 Auteurs : Tran, Thu Hien; Govin, Alexandre; é, Ren; Grosseau, Philippe; Lors, Christine; Damidot, Denis; Devès, Olivier; Ruot, Bertrand Influence of the intrinsic characteristics of mortars on their biofouling by pigmented organisms: Comparison between laboratory and field-scale experiments. Dans: International Biodeterioration and Biodegradation, vol. 86, no. Part C, p. 334-342, 2014. Liens @article{Tran2014b,
title = {Influence of the intrinsic characteristics of mortars on their biofouling by pigmented organisms: Comparison between laboratory and field-scale experiments.},
author = {Thu Hien Tran and Alexandre Govin and Ren é and Philippe Grosseau and Christine Lors and Denis Damidot and Olivier Devès and Bertrand Ruot},
url = {https://hal.archives-ouvertes.fr/hal-00908332},
doi = {10.1016/j.ibiod.2013.10.005},
year = {2014},
date = {2014-01-01},
journal = {International Biodeterioration and Biodegradation},
volume = {86},
number = {Part C},
pages = {334-342},
publisher = {Elsevier},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER2 Auteurs : TRAN, Thu Hien; GOVIN, Alexandre; GUYONNET, René; GROSSEAU, Philippe; Lors, Christine; Damidot, Denis; DEVES, Olivier; RUOT, Bertrand Influence of the intrinsic characteristics of mortars on biofouling: Comparison between laboratory and field scale experiments Dans: International Biodeterioration & Biodegradation, vol. 86, no. Part C, p. 334-342, 2014, (ACL). Résumé | Liens @article{TRAN2014Ab,
title = {Influence of the intrinsic characteristics of mortars on biofouling: Comparison between laboratory and field scale experiments},
author = {Thu Hien TRAN and Alexandre GOVIN and René GUYONNET and Philippe GROSSEAU and Christine Lors and Denis Damidot and Olivier DEVES and Bertrand RUOT},
doi = {doi:10.1016/j.ibiod.2013.10.005},
year = {2014},
date = {2014-01-01},
journal = {International Biodeterioration & Biodegradation},
volume = {86},
number = {Part C},
pages = {334-342},
abstract = {Biodeterioration of mortars by the photosynthetic microorganisms is affected by their intrinsic properties such as porosity, roughness and surface pH. The influence of these parameters was examined using an accelerated fouling test in laboratory and a natural fouling test in the real-world (in situ). Based on color measurement and image analysis, the impact of each intrinsic parameter was evaluated. The results differed from a scale to the other one. No influence of porosity was measured on the algal colonization rate in the laboratory test whereas, a high porosity seemed to increase slightly the bioreceptivity of the mortars exposed outdoor. The roughness, in both tests, promoted the microbial colonization. However, the discrimination of roughness grades was better in the laboratory test than in the in situ one. The surface pH influenced remarkably on the accelerated biofouling test but not on the in situ one. These dissimilarities resulted from the differences in experimental configurations of the two tests.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Biodeterioration of mortars by the photosynthetic microorganisms is affected by their intrinsic properties such as porosity, roughness and surface pH. The influence of these parameters was examined using an accelerated fouling test in laboratory and a natural fouling test in the real-world (in situ). Based on color measurement and image analysis, the impact of each intrinsic parameter was evaluated. The results differed from a scale to the other one. No influence of porosity was measured on the algal colonization rate in the laboratory test whereas, a high porosity seemed to increase slightly the bioreceptivity of the mortars exposed outdoor. The roughness, in both tests, promoted the microbial colonization. However, the discrimination of roughness grades was better in the laboratory test than in the in situ one. The surface pH influenced remarkably on the accelerated biofouling test but not on the in situ one. These dissimilarities resulted from the differences in experimental configurations of the two tests. |
2014Thèse ER2 Auteurs : Chartier, Thierry Conception, modélisation et réalisation d'une biosonde thermique. Application au domaine de la thermothérapie Université d'Artois, 2014, (TH). @phdthesis{cha2014,
title = {Conception, modélisation et réalisation d'une biosonde thermique. Application au domaine de la thermothérapie},
author = {Thierry Chartier},
year = {2014},
date = {2014-01-01},
school = {Université d'Artois},
note = {TH},
keywords = {ER2},
pubstate = {published},
tppubtype = {phdthesis}
}
|
2014Article de journal ER2 Auteurs : Crépy, Lucie; Petit, Jean-Yves; Wirquin, Eric; Martin, Patrick; Joly, Nicolas Synthesis and evaluation of starch-based polymers as potential dispersants in cement pastes.and self leveling compounds Dans: Cement and Concrete Composites, 2014, (ACL). @article{cre2014a,
title = {Synthesis and evaluation of starch-based polymers as potential dispersants in cement pastes.and self leveling compounds},
author = {Lucie Crépy and Jean-Yves Petit and Eric Wirquin and Patrick Martin and Nicolas Joly},
year = {2014},
date = {2014-01-01},
journal = {Cement and Concrete Composites},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER2 Auteurs : Kimbonguila-Manounou, Adolphe; Rémond, Sébastien Discrete element modeling of the microstructure of fine particle agglomerates in sheared dilute suspension Dans: Physica A: Statistical Mechanics and its Applications, vol. 412, p. 66 - 83, 2014, ISSN: 0378-4371, (ACL). Liens @article{Kimb2014ab,
title = {Discrete element modeling of the microstructure of fine particle agglomerates in sheared dilute suspension},
author = {Adolphe Kimbonguila-Manounou and Sébastien Rémond},
url = {http://www.sciencedirect.com/science/article/pii/S0378437114004889},
doi = {http://dx.doi.org/10.1016/j.physa.2014.06.023},
issn = {0378-4371},
year = {2014},
date = {2014-01-01},
journal = {Physica A: Statistical Mechanics and its Applications},
volume = {412},
pages = {66 - 83},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2014Conférence ER2 Auteurs : DIA, Moussa; Zentar, Rachid; Abriak, Nor-Edine; NZIHOU,; DEPELSENAIRE,; GERMEAU, Effect of physico-chemical and thermal treatment on the environmental behavior of sediments The 5th International Conference on Engineering for waste and Biomass Valorisation (WasteEng2014)., Rio de Janeiro (BRESIL), 2014, (COM). Liens @conference{DIA2014B,
title = {Effect of physico-chemical and thermal treatment on the environmental behavior of sediments},
author = {Moussa DIA and Rachid Zentar and Nor-Edine Abriak and NZIHOU and DEPELSENAIRE and GERMEAU},
doi = {979-1091526-03-6},
year = {2014},
date = {2014-00-01},
booktitle = {The 5th International Conference on Engineering for waste and Biomass Valorisation (WasteEng2014).},
pages = {1146-1453},
address = {Rio de Janeiro (BRESIL)},
note = {COM},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2014Conférence ER2 Auteurs : EL-CHEIKH,; Pizette, Patrick; Rémond, Sébastien; Djelal-Dantec, Chafika; Vanhove, Yannick Etude de linterface béton/paroi : Modélisation à léchelle des grai 15 ème édition des journées scientifiques (RF2B) : Regroupement Francophone pour la Recherche et la Formation sur le Béton, DOUAI, 2014, (COM). @conference{ELCH2014,
title = {Etude de linterface béton/paroi : Modélisation à léchelle des grai},
author = {EL-CHEIKH and Patrick Pizette and Sébastien Rémond and Chafika Djelal-Dantec and Yannick Vanhove},
year = {2014},
date = {2014-00-01},
booktitle = {15 ème édition des journées scientifiques (RF2B) : Regroupement Francophone pour la Recherche et la Formation sur le Béton},
pages = {CD ROM},
address = {DOUAI},
note = {COM},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2014Manuel technique ER2 Auteurs : GATEL, P; ZACEK, V; KRUSZEWSKI, L; DEVOUARD, B; Thiery, Vincent; EYTIER, C; EYTIER, J-R; FAVREAU, G; VIGIER, J; GLENN, STRACHER B Combustion Mineralogy of Oil-Shale Slags, in ÂCoal and Peat Fires: A Global Perspective. Volume 3: Case Studies  Coal FiresÂ, Chapter 28, pp 682-742. Eds. G. Stracher, AṖrakash & E.V. So Elsevier, 2014, (OS). Résumé @manual{GATE2014A,
title = {Combustion Mineralogy of Oil-Shale Slags, in ÂCoal and Peat Fires: A Global Perspective. Volume 3: Case Studies  Coal FiresÂ, Chapter 28, pp 682-742. Eds. G. Stracher, AṖrakash & E.V. So},
author = {P GATEL and V ZACEK and L KRUSZEWSKI and B DEVOUARD and Vincent Thiery and C EYTIER and J-R EYTIER and G FAVREAU and J VIGIER and STRACHER B GLENN},
year = {2014},
date = {2014-00-01},
edition = {Elsevier},
abstract = {Coal and Peat Fires: A Global Perspective, Volumes 1-4, presents a fascinating collection of research about prehistoric and historic coal and peat fires. Magnificent illustrations of fires and research findings from countries around the world are featured-a totally new contribution to science. This third of four volumes in the collection, Coal Fires - Case Studies, examines in detail specific coal fires chronicled in a number of locations around the world including Brazil, the Czech Republic, Germany, Malawi, Poland, Russia, Spain, Tajikistan, the United States, Venezuela, and others.},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {manual}
}
Coal and Peat Fires: A Global Perspective, Volumes 1-4, presents a fascinating collection of research about prehistoric and historic coal and peat fires. Magnificent illustrations of fires and research findings from countries around the world are featured-a totally new contribution to science. This third of four volumes in the collection, Coal Fires - Case Studies, examines in detail specific coal fires chronicled in a number of locations around the world including Brazil, the Czech Republic, Germany, Malawi, Poland, Russia, Spain, Tajikistan, the United States, Venezuela, and others. |
2014Article de journal ER2 Auteurs : MAHERZI, Walid; Benzerzour, Mahfoud; ABDELGHANI, BEN F Essais daptitude au traitement des sédiments de dragage marins en vue de leur valorisation en techniques routière Dans: Déchet Sciences et Techniques, no. 68, p. 16-22, 2014, (ACL). Résumé @article{MAHE2014A,
title = {Essais daptitude au traitement des sédiments de dragage marins en vue de leur valorisation en techniques routière},
author = {Walid MAHERZI and Mahfoud Benzerzour and BEN F ABDELGHANI},
year = {2014},
date = {2014-00-01},
journal = {Déchet Sciences et Techniques},
number = {68},
pages = {16-22},
abstract = {Les résultats présentés dans cet article sÂinscrivent dans le cadre du projet de recherche Européen SETARMS dont lÂun des objectifs consiste `a trouver des solutions innovantes et durables pour la gestion des sédiments marins dragués en Manche (France-Angleterre) pour une application en techniques routi`eres, plus particuli`erement en couche de forme. Apr`es une 1`ere étape de caractérisation géotechnique des sédiments de dragage selon le GTR, les recommandations du GTS ont été utilisées pour le traitement des sédiments aux liants hydrauliques. Ainsi une formulation `a 3 % de chaux et 6 % de ciment est appliquée `a huit sédiments. Des essais dÂaptitude au traitement comprenant des mesures de gonflements volumiques (Gv) et de résistances `a la traction indirecte (Rit) ont été réalisés sur les huit sédiments traités en adoptant les normes standards en vigueur en France. Les résultats obtenus montrent que malgré une m^eme origine des sédiments et des classes GTR assez proches (A1 et A2), les sédiments traités répondent différemment aux essais dÂaptitude. Ces premiers résultats, utiles `a lÂavancement du projet, permettent une meilleure compréhension de la problématique de traitement des sédiments aux liants hydrauliques et leur valorisation en techniques routi`eres.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Les résultats présentés dans cet article sÂinscrivent dans le cadre du projet de recherche Européen SETARMS dont lÂun des objectifs consiste `a trouver des solutions innovantes et durables pour la gestion des sédiments marins dragués en Manche (France-Angleterre) pour une application en techniques routi`eres, plus particuli`erement en couche de forme. Apr`es une 1`ere étape de caractérisation géotechnique des sédiments de dragage selon le GTR, les recommandations du GTS ont été utilisées pour le traitement des sédiments aux liants hydrauliques. Ainsi une formulation `a 3 % de chaux et 6 % de ciment est appliquée `a huit sédiments. Des essais dÂaptitude au traitement comprenant des mesures de gonflements volumiques (Gv) et de résistances `a la traction indirecte (Rit) ont été réalisés sur les huit sédiments traités en adoptant les normes standards en vigueur en France. Les résultats obtenus montrent que malgré une m^eme origine des sédiments et des classes GTR assez proches (A1 et A2), les sédiments traités répondent différemment aux essais dÂaptitude. Ces premiers résultats, utiles `a lÂavancement du projet, permettent une meilleure compréhension de la problématique de traitement des sédiments aux liants hydrauliques et leur valorisation en techniques routi`eres. |
2014Conférence ER2 Auteurs : SADOK,; Zentar, Rachid; Abriak, Nor-Edine Đesign method of civil engineering materials with evolutionary algorithm 4 th International Symposium on Sediment management, FERRARA (Italie), 2014, (COM). @conference{SADO2014A,
title = {Đesign method of civil engineering materials with evolutionary algorithm},
author = {SADOK and Rachid Zentar and Nor-Edine Abriak},
year = {2014},
date = {2014-00-01},
booktitle = {4 th International Symposium on Sediment management},
pages = {CD ROM},
address = {FERRARA (Italie)},
note = {COM},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2014Conférence ER2 Auteurs : TRAN,; GOVIN,; GUYONNET,; GROSSEAU,; Lors, Christine; Damidot, Denis; DEVES,; RUOT, Biofouling of Mortars by Pigmented Organisms: In-Situ and Laboratory Investigation of the Effect of Material Properties 6th International Conference of Asian Concrete Federation (ICACF), Seoul (Korea), 2014, (COM). @conference{TRAN2014D,
title = {Biofouling of Mortars by Pigmented Organisms: In-Situ and Laboratory Investigation of the Effect of Material Properties},
author = {TRAN and GOVIN and GUYONNET and GROSSEAU and Christine Lors and Denis Damidot and DEVES and RUOT},
year = {2014},
date = {2014-00-01},
booktitle = {6th International Conference of Asian Concrete Federation (ICACF)},
pages = {CD ROM},
address = {Seoul (Korea)},
note = {COM},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2014Conférence ER2 Auteurs : TRAN, Thu Hien; GOVIN, Alexandre; GUYONNET, René; GROSSEAU, Philippe; Lors, Christine; Damidot, Denis; DEVES, Olivier; RUOT, Bertrand An in-situ and laboratory study of the effect of the intrinsic properties of mortars on their potential bioreceptivity 13th international Conference on Building materials and Components, Säo Paulo (Brésil) 2014, (TH). @conference{TRAN2014Bb,
title = {An in-situ and laboratory study of the effect of the intrinsic properties of mortars on their potential bioreceptivity},
author = {Thu Hien TRAN and Alexandre GOVIN and René GUYONNET and Philippe GROSSEAU and Christine Lors and Denis Damidot and Olivier DEVES and Bertrand RUOT},
year = {2014},
date = {2014-00-01},
booktitle = {13th international Conference on Building materials and Components},
organization = {Säo Paulo (Brésil)},
note = {TH},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2014Manuel technique ER2 Auteurs : Zentar, Rachid PR NF X30-443 Đéchets  Đétermination en laboratoire du coefficient de perméabilité à saturation d'un matériau à Perméamêtre à paroi flexible à gradient hydraulique consta 2014, (OS). Résumé @manual{ZENT2014b,
title = {PR NF X30-443 Đéchets  Đétermination en laboratoire du coefficient de perméabilité à saturation d'un matériau à Perméamêtre à paroi flexible à gradient hydraulique consta},
author = {Rachid Zentar},
year = {2014},
date = {2014-00-01},
abstract = {La méthode décrite dans le présent document est utilisée en géotechnique de lÂenvironnement pour caractériser le coefficient de perméabilité des matériaux utilisés pour le confinement des déchets ou de sols pollués. Elle est utilisée également dans les domaines du génie civil et de lÂhydrogéologie en général. Ce document définit les termes employés et les param`etres mesurés. Il spécifie les principales caractéristiques de la méthode employée, fixe les modes opératoires relatifs aux différentes techniques de mesure mises en Âuvre, et précise la nature et le mode de présentation des résultats.},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {manual}
}
La méthode décrite dans le présent document est utilisée en géotechnique de lÂenvironnement pour caractériser le coefficient de perméabilité des matériaux utilisés pour le confinement des déchets ou de sols pollués. Elle est utilisée également dans les domaines du génie civil et de lÂhydrogéologie en général. Ce document définit les termes employés et les param`etres mesurés. Il spécifie les principales caractéristiques de la méthode employée, fixe les modes opératoires relatifs aux différentes techniques de mesure mises en Âuvre, et précise la nature et le mode de présentation des résultats. |
2014Manuel technique ER2 Auteurs : Abriak, Nor-Edine; MAMINDY-PAJANY, Yannick; ACHOUR, Raouf; Benzerzour, Mahfoud; Zentar, Rachid Guide méthodologique à valorisation des sédiments de dragage dans la filières béton CD2E, 2014, (OS). Résumé @manual{ABRI2014B,
title = {Guide méthodologique à valorisation des sédiments de dragage dans la filières béton},
author = {Nor-Edine Abriak and Yannick MAMINDY-PAJANY and Raouf ACHOUR and Mahfoud Benzerzour and Rachid Zentar},
year = {2014},
date = {2014-00-01},
edition = {CD2E},
abstract = {Le présent guide élaboré dans le cadre de la démarche nationale Sédimatériaux expose les modalités sous lesquelles les sédiments de dragage peuvent ^etre valorisés en fabrication du béton dans une optique de développement durable, de protection de lÂenvironnement et des populations. Ce guide est issu des travaux de recherche menés par le Département Génie Civil et Environnemental (DGCE) de lÂEcole des Mines de Douai depuis plus de dix ans et des projets accompagnés dans le cadre de la démarche Sédimatériaux sur la thématique de valorisation des sédiments de dragage, et ceci en cohérence avec la réglementation nationale en vigueur sur la gestion `a terre des sédiments de dragage et lÂacceptabilité des matériaux alternatifs en fabrication des blocs bétons. La méthodologie proposée a été élaborée par le Département Génie Civil & Environnemental de lÂEcole des Mines de Douai et constitue une base de travail pour la construction dÂun guide dÂapplication relatif `a lÂétude technique de fabrication du béton intégrant des sédiments de dragage ainsi que sa durabilité. Les modalités de la démarche décrite dans le présent guide pourront ^etre revues en fonction des retours dÂexpériences reçus au niveau national et international. Le contenu du guide sera amendé par les résultats issus des projets en cours accompagnés dans le cadre de la démarche Sédimatériaux et approfondi par les travaux de recherche qui seront réalisés par la chaire industrielle EcoSed (Economie circulaire des Sédiments) lancée le 2 avril 2014 et pilotée par lÂEcole des Mines de Douai.},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {manual}
}
Le présent guide élaboré dans le cadre de la démarche nationale Sédimatériaux expose les modalités sous lesquelles les sédiments de dragage peuvent ^etre valorisés en fabrication du béton dans une optique de développement durable, de protection de lÂenvironnement et des populations. Ce guide est issu des travaux de recherche menés par le Département Génie Civil et Environnemental (DGCE) de lÂEcole des Mines de Douai depuis plus de dix ans et des projets accompagnés dans le cadre de la démarche Sédimatériaux sur la thématique de valorisation des sédiments de dragage, et ceci en cohérence avec la réglementation nationale en vigueur sur la gestion `a terre des sédiments de dragage et lÂacceptabilité des matériaux alternatifs en fabrication des blocs bétons. La méthodologie proposée a été élaborée par le Département Génie Civil & Environnemental de lÂEcole des Mines de Douai et constitue une base de travail pour la construction dÂun guide dÂapplication relatif `a lÂétude technique de fabrication du béton intégrant des sédiments de dragage ainsi que sa durabilité. Les modalités de la démarche décrite dans le présent guide pourront ^etre revues en fonction des retours dÂexpériences reçus au niveau national et international. Le contenu du guide sera amendé par les résultats issus des projets en cours accompagnés dans le cadre de la démarche Sédimatériaux et approfondi par les travaux de recherche qui seront réalisés par la chaire industrielle EcoSed (Economie circulaire des Sédiments) lancée le 2 avril 2014 et pilotée par lÂEcole des Mines de Douai. |
2014Manuel technique ER2 Auteurs : Abriak, Nor-Edine; MAMINDY-PAJANY, Yannick; ACHOUR, Raouf; Zentar, Rachid; Benzerzour, Mahfoud Guide méthodologique « Valorisation des sédiments de dragage en technique routi`ere CD2E, 2014, (OS). Résumé @manual{ABRI2014C,
title = {Guide méthodologique « Valorisation des sédiments de dragage en technique routi`ere},
author = {Nor-Edine Abriak and Yannick MAMINDY-PAJANY and Raouf ACHOUR and Rachid Zentar and Mahfoud Benzerzour},
year = {2014},
date = {2014-00-01},
edition = {CD2E},
abstract = {Le présent guide expose la méthodologie et les modalités sous lesquelles les sédiments de dragage peuvent ^etre valorisés en technique routi`ere dans une optique de développement durable, de protection de lÂenvironnement et des populations. Ce guide est issu des travaux de recherche menés par le Département Génie Civil et Environnemental (DGCE) de lÂEcole des Mines de Douai depuis plus de dix ans sur la thématique de valorisation des sédiments de dragage, et ceci en cohérence avec la réglementation nationale et le cadre méthodologique (ADEME, 2010 ; SETRA, 2011) qui prévalait lors de la réalisation des travaux.
La méthodologie proposée a été élaborée par lÂEcole des Mines de Douai dans le cadre de la démarche SEDIMATERIAUX et constitue une base de travail pour la construction dÂun guide dÂapplication relatif `a lÂutilisation des sédiments de dragage en technique routi`ere. Les modalités de la démarche décrite dans le présent guide pourront ^etre revues en fonction des retours dÂexpériences reçus au niveau régional, national ou européen.},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {manual}
}
Le présent guide expose la méthodologie et les modalités sous lesquelles les sédiments de dragage peuvent ^etre valorisés en technique routi`ere dans une optique de développement durable, de protection de lÂenvironnement et des populations. Ce guide est issu des travaux de recherche menés par le Département Génie Civil et Environnemental (DGCE) de lÂEcole des Mines de Douai depuis plus de dix ans sur la thématique de valorisation des sédiments de dragage, et ceci en cohérence avec la réglementation nationale et le cadre méthodologique (ADEME, 2010 ; SETRA, 2011) qui prévalait lors de la réalisation des travaux.
La méthodologie proposée a été élaborée par lÂEcole des Mines de Douai dans le cadre de la démarche SEDIMATERIAUX et constitue une base de travail pour la construction dÂun guide dÂapplication relatif `a lÂutilisation des sédiments de dragage en technique routi`ere. Les modalités de la démarche décrite dans le présent guide pourront ^etre revues en fonction des retours dÂexpériences reçus au niveau régional, national ou européen. |
2014Manuel technique ER2 Auteurs : Abriak, Nor-Edine; MAMINDY-PAJANY, Yannick; Khezami,; ACHOUR, Raouf; Zentar, Rachid; Benzerzour, Mahfoud Guide méthodologique à valorisation des sédiments de dragage en aménagements paysager CD2E, 2014, (OS). Résumé @manual{ABRI2014A,
title = {Guide méthodologique à valorisation des sédiments de dragage en aménagements paysager},
author = {Nor-Edine Abriak and Yannick MAMINDY-PAJANY and Khezami and Raouf ACHOUR and Rachid Zentar and Mahfoud Benzerzour},
year = {2014},
date = {2014-00-01},
edition = {CD2E},
abstract = {Le présent guide expose la méthodologie selon laquelle les sédiments de dragage peuvent ^etre valorisés en éco-modelés paysagers dans une perspective de développement durable, de protection de lÂenvironnement et des populations. Ce guide est issu des travaux de recherche réalisés par le Département Génie Civil et Environnemental (DGCE) de lÂEcole des Mines de Douai sur la thématique de valorisation des sédiments de dragage, et ceci en cohérence avec la réglementation nationale qui prévalait lors de la réalisation des travaux.
La méthodologie exposée dans ce guide est exclusivement réservée aux projets de valorisation sÂintégrant dans un plan dÂaménagement paysager et aux gisements de sédiments dont les caractéristiques géotechniques et mécaniques sont conformes aux normes de spécifications dÂusage en vigueur. Ces exigences sont primordiales afin de ne pas faire des éco-modelés paysagers un substitut de la mise en décharge.
La méthodologie proposée a été élaborée par lÂEcole des Mines de Douai dans le cadre de la démarche national SEDIMATERIAUX et constitue une base de travail pour la construction dÂun guide dÂapplication relatif `a lÂutilisation des sédiments de dragage en éco-modelés paysagers. Les modalités de la méthodologie décrite dans le présent guide pourront ^etre revues en fonction des retours dÂexpériences reçus au niveau national et européen.},
note = {OS},
keywords = {ER2},
pubstate = {published},
tppubtype = {manual}
}
Le présent guide expose la méthodologie selon laquelle les sédiments de dragage peuvent ^etre valorisés en éco-modelés paysagers dans une perspective de développement durable, de protection de lÂenvironnement et des populations. Ce guide est issu des travaux de recherche réalisés par le Département Génie Civil et Environnemental (DGCE) de lÂEcole des Mines de Douai sur la thématique de valorisation des sédiments de dragage, et ceci en cohérence avec la réglementation nationale qui prévalait lors de la réalisation des travaux.
La méthodologie exposée dans ce guide est exclusivement réservée aux projets de valorisation sÂintégrant dans un plan dÂaménagement paysager et aux gisements de sédiments dont les caractéristiques géotechniques et mécaniques sont conformes aux normes de spécifications dÂusage en vigueur. Ces exigences sont primordiales afin de ne pas faire des éco-modelés paysagers un substitut de la mise en décharge.
La méthodologie proposée a été élaborée par lÂEcole des Mines de Douai dans le cadre de la démarche national SEDIMATERIAUX et constitue une base de travail pour la construction dÂun guide dÂapplication relatif `a lÂutilisation des sédiments de dragage en éco-modelés paysagers. Les modalités de la méthodologie décrite dans le présent guide pourront ^etre revues en fonction des retours dÂexpériences reçus au niveau national et européen. |
2013Conférence ER2 Auteurs : Govin, Alexandre; Tran, Thu Hien; Guyonnet, René; Grosseau, Philippe; Lors, Christine; Damidot, Denis; Devès, Olivier; Ruot, Bertrand Ability in biofouling by textlessitextgreaterKlebsormidium flaccidumtextless/itextgreater of mortars: Influence of the intrinsic characteristics First International Conference on Concrete Sustainability (ICCS), Japan Concrete Institute, Tokyo, Japan, 2013. Liens @conference{govin:hal-00805695,
title = {Ability in biofouling by textlessitextgreaterKlebsormidium flaccidumtextless/itextgreater of mortars: Influence of the intrinsic characteristics},
author = {Alexandre Govin and Thu Hien Tran and René Guyonnet and Philippe Grosseau and Christine Lors and Denis Damidot and Olivier Devès and Bertrand Ruot},
editor = {Koji Sakai},
url = {https://hal.archives-ouvertes.fr/hal-00805695},
year = {2013},
date = {2013-05-01},
booktitle = {First International Conference on Concrete Sustainability (ICCS)},
pages = {S3-3-6 pp. 914-919},
publisher = {Japan Concrete Institute},
address = {Tokyo, Japan},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2013Conférence ER2 Auteurs : Bourdot, Alexandra; Thiery, Vincent; Bulteel, David Effects of spent shales on reactive aggregates based concrete toward alkali-silica reaction 14th Euroseminar of Microscopy Applied to Building Materials (EMABM), Helsingør, 2013. @conference{BOUR2013A,
title = {Effects of spent shales on reactive aggregates based concrete toward alkali-silica reaction},
author = {Alexandra Bourdot and Vincent Thiery and David Bulteel},
year = {2013},
date = {2013-01-01},
booktitle = {14th Euroseminar of Microscopy Applied to Building Materials (EMABM)},
pages = {21-24},
address = {Helsingør},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2013Conférence ER2 Auteurs : Bréhéret, Jean-Gabriel; Detriche, Sébastien; Karrat, Lâhoucine; Hinschberger, F; Macaire, Jean-Jacques Contrôle de l'environnement sur la sédimentation carbonatée récente dun lac du Moyen Atlas (Lac Afourgagh, Maro 14eme congrès de l'Association des Sédimentologues Français, 4 au 8 novembre 2013, Paris., 2013, (ACTN). @conference{Breheret2013b,
title = {Contrôle de l'environnement sur la sédimentation carbonatée récente dun lac du Moyen Atlas (Lac Afourgagh, Maro},
author = {Jean-Gabriel Bréhéret and Sébastien Detriche and Lâhoucine Karrat and F Hinschberger and Jean-Jacques Macaire},
year = {2013},
date = {2013-01-01},
booktitle = {14eme congrès de l'Association des Sédimentologues Français, 4 au 8 novembre 2013, Paris.},
note = {ACTN},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2013Article de journal ER2 Auteurs : Detriche, Sébastien; Breheret, J-G; Karrat, L; Hinschberger, F; Macaire, J-J Environmental controls on the late Ħolocene carbonate sedimentation of a karstic lake in the Middle-Atlas Mountains (Lake Afourgagh, Morocco). Accepté dans Sedimentology. Dans: 2013, (ACL). @article{L13011,
title = {Environmental controls on the late Ħolocene carbonate sedimentation of a karstic lake in the Middle-Atlas Mountains (Lake Afourgagh, Morocco). Accepté dans Sedimentology.},
author = {Sébastien Detriche and J-G Breheret and L Karrat and F Hinschberger and J-J Macaire},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Monchau, Francine; Hivart, Philippe; Genestie, Benoit; Chai, F; Descamps, M; Hildebrand, H F Calcite as a bone substitute. Comparison with hydroxyapatite and tricalcium phosphate with regard to the osteoblastic activity Dans: Materials Science and Engineering: C, vol. 33, no. 1, p. 490–498, 2013. Liens @article{Monchau2013,
title = {Calcite as a bone substitute. Comparison with hydroxyapatite and tricalcium phosphate with regard to the osteoblastic activity},
author = {Francine Monchau and Philippe Hivart and Benoit Genestie and F Chai and M Descamps and H F Hildebrand},
doi = {10.1016/j.msec.2012.09.019},
year = {2013},
date = {2013-01-01},
journal = {Materials Science and Engineering: C},
volume = {33},
number = {1},
pages = {490--498},
publisher = {Elsevier BV},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric Evaluation of various cellulose ethers performance in ceramic tileadhesive mortars, International Journal of Adhesion & Adhesives,vol. 40, n° 1, janvier 2013, pp. 202-209 Dans: 2013, (ACL). @article{Petit2013,
title = {Evaluation of various cellulose ethers performance in ceramic tileadhesive mortars, International Journal of Adhesion & Adhesives,vol. 40, n° 1, janvier 2013, pp. 202-209},
author = {Jean-Yves Petit and Eric Wirquin},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Pizette, Patrick; Martin, CL.; Delette, G; Geneves, T; Sans, F Green strength of binder-free ceramic, Journal of the European Ceramic Society (33),pp 975-984, 2013. http://dx.doi.org/10.1016/j.jeurceramsoc.2012.11.018 Dans: 2013, (ACL). @article{L13001,
title = {Green strength of binder-free ceramic, Journal of the European Ceramic Society (33),pp 975-984, 2013. http://dx.doi.org/10.1016/j.jeurceramsoc.2012.11.018},
author = {Patrick Pizette and CL. Martin and G Delette and T Geneves and F Sans},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Sebaibi, N; Benzerzour, Mahfoud; Sebaibi, Y; Abriak, Nor-Edine Composition of self compacting concrete (SCC) using the compressible packing model, the Chinese method and the European standard Dans: Construction and Building Materials, vol. 43, p. 382-388, 2013, (ACL). Liens @article{Sebaibi2013382,
title = {Composition of self compacting concrete (SCC) using the compressible packing model, the Chinese method and the European standard},
author = {N Sebaibi and Mahfoud Benzerzour and Y Sebaibi and Nor-Edine Abriak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84875819300&doi=10.1016%2fj.conbuildmat.2013.02.028&partnerID=40&md5=fa6194bcbc9eb1adc470216f8b9e83f0},
doi = {10.1016/j.conbuildmat.2013.02.028},
year = {2013},
date = {2013-01-01},
journal = {Construction and Building Materials},
volume = {43},
pages = {382-388},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Rangeard, D; Zentar, Rachid; Hicher, P Đetermining soil permeability from pressuremeter tests, International Journal for Numerical and Analytical Methods in Geomechanics, Vol 27/1, pp 1-24, 2002 [Impact Factor ISI WoK JCR 2012 = 1,055] Dans: 2013. Résumé @article{L14005,
title = {Đetermining soil permeability from pressuremeter tests, International Journal for Numerical and Analytical Methods in Geomechanics, Vol 27/1, pp 1-24, 2002 [Impact Factor ISI WoK JCR 2012 = 1,055]},
author = {D Rangeard and Rachid Zentar and P Hicher},
year = {2013},
date = {2013-01-01},
abstract = {Ecole Centrale de Nantes},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Rangeard, D; Zentar, Rachid; Hicher, P Identification of soil parameters by inverse analysis, Computers and Geotechnics, Vol 28 /2, pp 129-144 [Impact Factor ISI WoK JCR 2012 = 1,224] Dans: 2013. @article{L14006,
title = {Identification of soil parameters by inverse analysis, Computers and Geotechnics, Vol 28 /2, pp 129-144 [Impact Factor ISI WoK JCR 2012 = 1,224]},
author = {D Rangeard and Rachid Zentar and P Hicher},
year = {2013},
date = {2013-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Thiery, Vincent External and internal features of garnet revealed by the multifocusimaging technique, Micron, http://dx.doi.org/10.1016/j.micron.2012.06.006,vol 44, pp675-678 Dans: 2013, (ACL). @article{THIE2013A,
title = {External and internal features of garnet revealed by the multifocusimaging technique, Micron, http://dx.doi.org/10.1016/j.micron.2012.06.006,vol 44, pp675-678},
author = {Vincent Thiery},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Thiery, Vincent Điversite des pratiques en laboratoires Dans: Mines & Carrieres, vol. 206, p. 174-176, 2013. @article{THIE2013B,
title = {Điversite des pratiques en laboratoires},
author = {Vincent Thiery},
year = {2013},
date = {2013-01-01},
journal = {Mines & Carrieres},
volume = {206},
pages = {174-176},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Thiery, Vincent; Cartannaz, C Ŧhe Merinchal antimoniferous district (French Massif Central) Dans: Periodico di Mineralogia - Special issue: Mineral applications on Environments, Archaeometry and Cultural Heritage, vol. 82, no. 1, p. 129-140, 2013. @article{THIE2013C,
title = {Ŧhe Merinchal antimoniferous district (French Massif Central)},
author = {Vincent Thiery and C Cartannaz},
year = {2013},
date = {2013-01-01},
journal = {Periodico di Mineralogia - Special issue: Mineral applications on Environments, Archaeometry and Cultural Heritage},
volume = {82},
number = {1},
pages = {129-140},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Thiery, Vincent; Sokol, Ella-V.; Kokh, Svetlana-N.; Masalehdani, M. -Naze-Nancy Le métamorphisme naturel à ultra-haute température (UHT) des roches `a Ca-Si (Al, Fe) - Comparaison avec la minéralogie du clink Dans: Géochronique, vol. 126, p. 27-29, 2013, (ACLN). @article{Thie2013e,
title = {Le métamorphisme naturel à ultra-haute température (UHT) des roches `a Ca-Si (Al, Fe) - Comparaison avec la minéralogie du clink},
author = {Vincent Thiery and Ella-V. Sokol and Svetlana-N. Kokh and M.-Naze-Nancy Masalehdani},
year = {2013},
date = {2013-01-01},
journal = {Géochronique},
volume = {126},
pages = {27-29},
note = {ACLN},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Thiery, Vincent; Vladimirovna-Sokol, Ellina; Masalehdani, M. -Naze-Nancy; Guy, Bernard La combustion des terrils Dans: Géochronique, vol. 127, p. 23-25, 2013, (ACLN). Résumé @article{Thie2013d,
title = {La combustion des terrils},
author = {Vincent Thiery and Ellina Vladimirovna-Sokol and M.-Naze-Nancy Masalehdani and Bernard Guy},
year = {2013},
date = {2013-01-01},
journal = {Géochronique},
volume = {127},
pages = {23-25},
abstract = {La combustion des terrils est une spécificité des régions o`u du charbon est (ou a été) exploité [Nous ne présenterons pas ici la combustion des stériles dâautres exploitations (schistes bitumineux, â¦) ni de la combustion des résidus métallurgiques]. Ce phénom`ene spectaculaire est relativement courant et suivi de pr`es dâune part `a cause des risques dâexplosion qui lui sont liés et d'autre part `a cause des conséquences environnementales. Du point de vue du pétrographe, des paragén`eses inhabituelles de ultra-haute température `a pression ambiante se développent, ainsi que des efflorescences de minéraux complexes, donnant ainsi des opportunités pour leur étude.},
note = {ACLN},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
La combustion des terrils est une spécificité des régions o`u du charbon est (ou a été) exploité [Nous ne présenterons pas ici la combustion des stériles dâautres exploitations (schistes bitumineux, â¦) ni de la combustion des résidus métallurgiques]. Ce phénom`ene spectaculaire est relativement courant et suivi de pr`es dâune part `a cause des risques dâexplosion qui lui sont liés et d'autre part `a cause des conséquences environnementales. Du point de vue du pétrographe, des paragén`eses inhabituelles de ultra-haute température `a pression ambiante se développent, ainsi que des efflorescences de minéraux complexes, donnant ainsi des opportunités pour leur étude. |
2013Article de journal ER2 Auteurs : Wang, D; Abriak, Nor-Edine; Zentar, Rachid Strength and deformation properties of Đunkirk marine sediments solidified with cement, lime and fly ash, Engineering Geology, N166, pp90-99,2013. [Impact Factor ISI WoK JCR 2012 : 1,403] Dans: 2013. @article{L14001,
title = {Strength and deformation properties of Đunkirk marine sediments solidified with cement, lime and fly ash, Engineering Geology, N166, pp90-99,2013. [Impact Factor ISI WoK JCR 2012 : 1,403]},
author = {D Wang and Nor-Edine Abriak and Rachid Zentar},
year = {2013},
date = {2013-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Wang, D; Abriak, Nor-Edine; Zentar, Rachid Effect of lime treatment on geotechnical properties of Đunkirk sediments in France. Road Material and Pavement Đesign, Vol Online, pp1-19, 15 janvier 2013. [Impact Factor ISI WoK JCR 2012=0,642] Dans: Road Material and pavement design, p. 1-19, 2013. @article{L14003,
title = {Effect of lime treatment on geotechnical properties of Đunkirk sediments in France. Road Material and Pavement Đesign, Vol Online, pp1-19, 15 janvier 2013. [Impact Factor ISI WoK JCR 2012=0,642]},
author = {D Wang and Nor-Edine Abriak and Rachid Zentar},
year = {2013},
date = {2013-01-01},
journal = {Road Material and pavement design},
pages = {1-19},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Wang, D; Abriak, Nor-Edine; Zentar, Rachid Co valorisation of Đunkork dredged sediments and siliceaous aluminous fly ash using lime. Road Material and Pavenment Đesign, Vol 14 n2, pp415-431, June 2013. [Impact Factor ISI WoK JCR=0,642 Dans: Road Material and Pavenment Design, 2013. @article{L14004,
title = {Co valorisation of Đunkork dredged sediments and siliceaous aluminous fly ash using lime. Road Material and Pavenment Đesign, Vol 14 n2, pp415-431, June 2013. [Impact Factor ISI WoK JCR=0,642},
author = {D Wang and Nor-Edine Abriak and Rachid Zentar},
year = {2013},
date = {2013-01-01},
journal = {Road Material and Pavenment Design},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Wang, D; Zentar, Rachid; Abriak, Nor-Edine; Xu, W Strength behavior of cement/lime-solidified Đunkrik Sdeiments by fall cone and Vane Shear test, Geotechnical Ŧesting Journal, Vol 36, n1, pp155-162, Jan 2013. [Impact Factor ISI WoK JCR 2012=0,246] Dans: Geotechnical Testing Journal, vol. 36 N 1, p. 155-162, 2013. @article{L14002,
title = {Strength behavior of cement/lime-solidified Đunkrik Sdeiments by fall cone and Vane Shear test, Geotechnical Ŧesting Journal, Vol 36, n1, pp155-162, Jan 2013. [Impact Factor ISI WoK JCR 2012=0,246]},
author = {D Wang and Rachid Zentar and Nor-Edine Abriak and W Xu},
year = {2013},
date = {2013-01-01},
journal = {Geotechnical Testing Journal},
volume = {36 N 1},
pages = {155-162},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Thèse ER2 Auteurs : Flament, Cédric Valorisation des fines de lavage de granulats : application à la construction en terre crue Université d'Artois, 2013, (TH). @phdthesis{FLAM2013A,
title = {Valorisation des fines de lavage de granulats : application à la construction en terre crue},
author = {Cédric Flament},
year = {2013},
date = {2013-01-01},
school = {Université d'Artois},
note = {TH},
keywords = {ER2},
pubstate = {published},
tppubtype = {phdthesis}
}
|
2013Article de journal ER2 Auteurs : Helnan-Moussa, Benjamin; Vanhove, Yannick; Wirquin, Eric Thixotropic behaviour and structural breakdown of fresh cement pastes comparison between two types of VMA Dans: Advances in Cement Research, vol. 25(4), p. 235-244, 2013, (ACL). @article{hel2013a,
title = {Thixotropic behaviour and structural breakdown of fresh cement pastes comparison between two types of VMA},
author = {Benjamin Helnan-Moussa and Yannick Vanhove and Eric Wirquin},
year = {2013},
date = {2013-01-01},
journal = {Advances in Cement Research},
volume = {25(4)},
pages = {235-244},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Thèse ER2 Auteurs : Nugyen, Trong-Khoa Modélisation de l'écoulement dans une biocémarique à pores sphériques interconnectés. Application aux bioréactions. Université d'Artois, 2013, (TH). @phdthesis{kho2013,
title = {Modélisation de l'écoulement dans une biocémarique à pores sphériques interconnectés. Application aux bioréactions.},
author = {Trong-Khoa Nugyen},
year = {2013},
date = {2013-01-01},
school = {Université d'Artois},
note = {TH},
keywords = {ER2},
pubstate = {published},
tppubtype = {phdthesis}
}
|
2013Article de journal ER2 Auteurs : Nugyen, Trong-Khoa; Carpentier, Olivier; Herin, Philippe; Hivart, Philippe Numerical Approach of the Permeability of a Macroporous Bioceramic with Interconnected Spherical Pores Dans: Transport in Porous Media, vol. 96 (2), p. pp 255-270, 2013, (ACL). @article{nguyen2013a,
title = {Numerical Approach of the Permeability of a Macroporous Bioceramic with Interconnected Spherical Pores},
author = {Trong-Khoa Nugyen and Olivier Carpentier and Philippe Herin and Philippe Hivart},
year = {2013},
date = {2013-01-01},
journal = {Transport in Porous Media},
volume = {96 (2)},
pages = {pp 255-270},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric Evaluation of various cellulose ether performances in ceramic tile adhesive mortars Dans: International Journal of Adhesion & Adhesives, vol. 40, p. 202-213, 2013, (ACL). @article{pet2013a,
title = {Evaluation of various cellulose ether performances in ceramic tile adhesive mortars},
author = {Jean-Yves Petit and Eric Wirquin},
year = {2013},
date = {2013-01-01},
journal = {International Journal of Adhesion & Adhesives},
volume = {40},
pages = {202-213},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric Characterising impact resistance of latex-cement mortars for external insulation systems Dans: Advances in Cement Research, vol. 26(1), p. 21-28, 2013, (ACL). @article{pet2013b,
title = {Characterising impact resistance of latex-cement mortars for external insulation systems},
author = {Jean-Yves Petit and Eric Wirquin},
year = {2013},
date = {2013-01-01},
journal = {Advances in Cement Research},
volume = {26(1)},
pages = {21-28},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER2 Auteurs : Pinoteau, Nicolas; Heck, Jean-Vivien; Rivillon, Philippe; Avenel, Romuald; Pimienta, Pierre; Guillet, Thierry; Rémond, Sébastien Prediction of failure of a cantileverwall connection using post-installed rebars under thermal loading Dans: Engineering Structures, vol. 56, p. 1607 - 1619, 2013, ISSN: 0141-0296, (ACL). Liens @article{Pino2013a,
title = {Prediction of failure of a cantileverwall connection using post-installed rebars under thermal loading},
author = {Nicolas Pinoteau and Jean-Vivien Heck and Philippe Rivillon and Romuald Avenel and Pierre Pimienta and Thierry Guillet and Sébastien Rémond},
url = {http://www.sciencedirect.com/science/article/pii/S0141029613003520},
doi = {http://dx.doi.org/10.1016/j.engstruct.2013.07.028},
issn = {0141-0296},
year = {2013},
date = {2013-01-01},
journal = {Engineering Structures},
volume = {56},
pages = {1607 - 1619},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Nguyen, Trong-Khoa; Carpentier, Olivier; Herin, Philippe; Hivart, Philippe Numerical Approach of the Permeability of a Macroporous Bioceramic with Interconnected Spherical Pores Dans: Transport in Porous Media, vol. 96, no. 2, p. 255–270, 2012. Liens @article{Nguyen2012,
title = {Numerical Approach of the Permeability of a Macroporous Bioceramic with Interconnected Spherical Pores},
author = {Trong-Khoa Nguyen and Olivier Carpentier and Philippe Herin and Philippe Hivart},
doi = {10.1007/s11242-012-0086-x},
year = {2012},
date = {2012-10-01},
journal = {Transport in Porous Media},
volume = {96},
number = {2},
pages = {255--270},
publisher = {Springer Science and Business Media LLC},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Debarre, Etienne; Hivart, Philippe; Baranski, D; Déprez, Pascal Speedy skeletal prototype production to help diagnosis in orthopaedic and trauma surgery. Methodology and examples of clinical applications Dans: Orthopaedics & Traumatology: Surgery & Research, vol. 98, no. 5, p. 597–602, 2012. Liens @article{Debarre_2012,
title = {Speedy skeletal prototype production to help diagnosis in orthopaedic and trauma surgery. Methodology and examples of clinical applications},
author = {Etienne Debarre and Philippe Hivart and D Baranski and Pascal Déprez},
doi = {10.1016/j.otsr.2012.03.016},
year = {2012},
date = {2012-09-01},
journal = {Orthopaedics & Traumatology: Surgery & Research},
volume = {98},
number = {5},
pages = {597--602},
publisher = {Elsevier BV},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Duchatel-Crépy, Lucie; Monchau, Francine; Chai, Feng; é, Gw; Hivart, Philippe; Hildebrand, Hartmut F; Martin, Patrick; Joly, Nicolas Evaluation of a bio-based hydrophobic cellulose laurate film as biomaterial-Study on biodegradation and cytocompatibility Dans: Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 100B, no. 4, p. 1000–1008, 2012. Liens @article{Crepy2012,
title = {Evaluation of a bio-based hydrophobic cellulose laurate film as biomaterial-Study on biodegradation and cytocompatibility},
author = {Lucie Duchatel-Crépy and Francine Monchau and Feng Chai and Gw é and Philippe Hivart and Hartmut F Hildebrand and Patrick Martin and Nicolas Joly},
doi = {10.1002/jbm.b.32665},
year = {2012},
date = {2012-02-01},
journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
volume = {100B},
number = {4},
pages = {1000--1008},
publisher = {Wiley},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Bellmann, F; Sowoidnich, T; Ludwig, H M; Damidot, Denis Analysis of the surface of tricalcium silicate during the inductionperiod by X-ray photoelectron spectroscopy, Cement and Concrete ResearchVol 42 pp 1189^aÂÂ1198 (201 Dans: 2012, (ACL). @article{Bellmann2012,
title = {Analysis of the surface of tricalcium silicate during the inductionperiod by X-ray photoelectron spectroscopy, Cement and Concrete ResearchVol 42 pp 1189^aÂÂ1198 (201},
author = {F Bellmann and T Sowoidnich and H M Ludwig and Denis Damidot},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Benzerzour, Mahfoud; SEBAIBI, N; Abriak, Nor-Edine; BINETRUY, C Waste fibre-cement matrix bond characteristics improved by usingsilane-treated fibres, conbuildmat.2012.02.048, Volume 37, Đecember2012, Pages 1-6 Dans: 2012, (ACL). @article{BENZERZOUR2012,
title = {Waste fibre-cement matrix bond characteristics improved by usingsilane-treated fibres, conbuildmat.2012.02.048, Volume 37, Đecember2012, Pages 1-6},
author = {Mahfoud Benzerzour and N SEBAIBI and Nor-Edine Abriak and C BINETRUY},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Bert, V; Lors, Christine; Ponge, J F; Caron, L; Biaz, A; Dazy, M; Masfaraud, J F Metal immobilization and soil amendment efficiency at a contaminated sediment landfill site : A field focusing on plants, springtails,and bacteria. Environmental Pollution, 169 : 1-1 Dans: 2012, (ACL). @article{Bert2012b,
title = {Metal immobilization and soil amendment efficiency at a contaminated sediment landfill site : A field focusing on plants, springtails,and bacteria. Environmental Pollution, 169 : 1-1},
author = {V Bert and Christine Lors and J F Ponge and L Caron and A Biaz and M Dazy and J F Masfaraud},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : CHAMPENOIS, J B; MESBAH, A; COUMES, CAU DIT C; RENAUDIN, G; LEROUX, F; MERCIER, C; REVEL, B; Damidot, Denis Crystal structures of Boro-AFm and Boro-AFt phases, Cement and ConcreteResearch, N°42, pp 1362-1370, octobre 2012 - 1 : CEA/DEN/MAR/DTCD/SPDE,Bagnols sur Ceze - 2 : Universite de Valenciennes et du Ħainaut-Cambresis- 3 : Université des Sc Dans: 2012, (ACL). @article{CHAMPENOIS2012,
title = {Crystal structures of Boro-AFm and Boro-AFt phases, Cement and ConcreteResearch, N°42, pp 1362-1370, octobre 2012 - 1 : CEA/DEN/MAR/DTCD/SPDE,Bagnols sur Ceze - 2 : Universite de Valenciennes et du Ħainaut-Cambresis- 3 : Université des Sc},
author = {J B CHAMPENOIS and A MESBAH and CAU DIT C COUMES and G RENAUDIN and F LEROUX and C MERCIER and B REVEL and Denis Damidot},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Crepy, Lucie; Wirquin, Eric; Martin, P; Joly, N Synthesis and evaluation of starch-based polymers as dispersantsin cement pastes and self levelling underlayments, soumis ÃÂ Cementand Concrete Composites (2012 Dans: 2012, (ACL). @article{CREP2012A,
title = {Synthesis and evaluation of starch-based polymers as dispersantsin cement pastes and self levelling underlayments, soumis ÃÂ Cementand Concrete Composites (2012},
author = {Lucie Crepy and Eric Wirquin and P Martin and N Joly},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Damidot, Denis Physico-Chemistry Applied to Cement-Based Materials, Journal of theChinese Ceramic Society, Vol. 40 No. 1 pp 1-6 (2012) Dans: 2012, (ACL). @article{Damidot2012,
title = {Physico-Chemistry Applied to Cement-Based Materials, Journal of theChinese Ceramic Society, Vol. 40 No. 1 pp 1-6 (2012)},
author = {Denis Damidot},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Gineys, N; Aouad, Georges; Sorrentino, F; Damidot, Denis Effect of the clinker composition on the threshold limits for Cu,Sn or Zn, Cement and Concrete Research Vol 42 pp 1088^aÂÂ1093 (201 Dans: 2012, (ACL). @article{Gineys2012,
title = {Effect of the clinker composition on the threshold limits for Cu,Sn or Zn, Cement and Concrete Research Vol 42 pp 1088^aÂÂ1093 (201},
author = {N Gineys and Georges Aouad and F Sorrentino and Denis Damidot},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Debarre, Etienne; Hivart, Philippe; Baranski, Didier; Déprez, Pascal Le prototypage rapide, une aide au diagnostic en chirurgie orthopédique et traumatologique. Méthodologie et exemples d’applications cliniques Dans: Revue de Chirurgie Orthopédique et Traumatologique, vol. 98, no. 5, p. 519-524, 2012, ISSN: 1877-0517, (ACL). Résumé | Liens @article{DEBARRE2012519,
title = {Le prototypage rapide, une aide au diagnostic en chirurgie orthopédique et traumatologique. Méthodologie et exemples d’applications cliniques},
author = {Etienne Debarre and Philippe Hivart and Didier Baranski and Pascal Déprez},
url = {https://www.sciencedirect.com/science/article/pii/S1877051712002420},
doi = {10.1016/j.rcot.2012.06.061},
issn = {1877-0517},
year = {2012},
date = {2012-01-01},
journal = {Revue de Chirurgie Orthopédique et Traumatologique},
volume = {98},
number = {5},
pages = {519-524},
abstract = {Résumé
Complétant l’imagerie médicale, une réplique 3D d’une zone anatomique d’intérêt peut être un avantage non négligeable en chirurgie orthopédique et traumatologique. À la différence du 3D virtuel, elle rend palpable la notion d’échelle et de volume, apparents des détails cachés ou ambigus, ainsi facilitant le diagnostic et la solution chirurgicale. Les données tomodensitométriques du patient, au standard DICOM3, sont exploitées pour une reconstruction 3D numérique suivie d’un prototypage rapide par dépôt de fil fondu d’une réplique en acrylonitrile-butadiène-styrène (ABS) de la zone concernée. Trois applications sont présentées : ostéotomie de cal vicieux épiphysaire, arthroplastie d’épaule et trochléoplastie fémorale. La taille réelle des répliques (réalisées en moins de 30heures) permet une excellente représentation spatiale avec estimation du stock osseux disponible et matérialisation du relief. Le procédé s’avère pertinent (et raisonnable du point de vue économique), même dans les cas courants, dès qu’il est question de géométrie complexe et de représentation objective de l’échelle des volumes.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Résumé
Complétant l’imagerie médicale, une réplique 3D d’une zone anatomique d’intérêt peut être un avantage non négligeable en chirurgie orthopédique et traumatologique. À la différence du 3D virtuel, elle rend palpable la notion d’échelle et de volume, apparents des détails cachés ou ambigus, ainsi facilitant le diagnostic et la solution chirurgicale. Les données tomodensitométriques du patient, au standard DICOM3, sont exploitées pour une reconstruction 3D numérique suivie d’un prototypage rapide par dépôt de fil fondu d’une réplique en acrylonitrile-butadiène-styrène (ABS) de la zone concernée. Trois applications sont présentées : ostéotomie de cal vicieux épiphysaire, arthroplastie d’épaule et trochléoplastie fémorale. La taille réelle des répliques (réalisées en moins de 30heures) permet une excellente représentation spatiale avec estimation du stock osseux disponible et matérialisation du relief. Le procédé s’avère pertinent (et raisonnable du point de vue économique), même dans les cas courants, dès qu’il est question de géométrie complexe et de représentation objective de l’échelle des volumes. |
2012Article de journal ER2 Auteurs : HEIN,; TRAN, T; GOVIN, A; GUYONNET, R; GROSSEAU, P; Lors, Christine; GARCIA-DIAZ, E; Damidot, Denis; DEVES, O; RUOT, B Influence of the intrinsic characteristics of mortars on biofoulingby Klebsormidium flaccidum, International Biodeterioration & Biodegradation,Vol 70, pp 31-39, 2012 Dans: 2012, (ACL). @article{HEIN2012,
title = {Influence of the intrinsic characteristics of mortars on biofoulingby Klebsormidium flaccidum, International Biodeterioration & Biodegradation,Vol 70, pp 31-39, 2012},
author = {HEIN and T TRAN and A GOVIN and R GUYONNET and P GROSSEAU and Christine Lors and E GARCIA-DIAZ and Denis Damidot and O DEVES and B RUOT},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : HELNAN-MOUSSA, B; Vanhove, Yannick; Wirquin, Eric Potential of destructuration of cement pastes: comparison betweentwo types of VMA », acceptée dans la revue Advances in Cement Researchen Juillet 20 Dans: 2012, (ACL). @article{HELNAN-MOUSSA2012c,
title = {Potential of destructuration of cement pastes: comparison betweentwo types of VMA », acceptée dans la revue Advances in Cement Researchen Juillet 20},
author = {B HELNAN-MOUSSA and Yannick Vanhove and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : HELNAN-MOUSSA, B; Vanhove, Yannick; Wirquin, Eric Ŧhixotropic behavior of fresh cement paste: comparison between twotypes of VMA, Advances in Cement Research, accepté juin 2012 Dans: 2012, (ACL). @article{HELNAN-MOUSSA2012ab,
title = {Ŧhixotropic behavior of fresh cement paste: comparison between twotypes of VMA, Advances in Cement Research, accepté juin 2012},
author = {B HELNAN-MOUSSA and Yannick Vanhove and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Jiang, Y; Zhang, S; Damidot, Denis Ettringite and Monosulfoaluminate in Polycarboxylate Ŧype AdmixtureĐispersed Fresh Cement Paste, Advanced Science Letters, Vol 5 N 2 pp. 663-666 Dans: 2012, (ACL). @article{Jiang2012,
title = {Ettringite and Monosulfoaluminate in Polycarboxylate Ŧype AdmixtureĐispersed Fresh Cement Paste, Advanced Science Letters, Vol 5 N 2 pp. 663-666},
author = {Y Jiang and S Zhang and Denis Damidot},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Lors, Christine; Ryngaert, A; Perie, F; Diels, L; Damidot, Denis Comparison of a bioremediation process applied to a PAHs-contaminatedsoil at field and laboratory scales. Environmental Pollution, 165Â :11-17 Dans: 2012, (ACL). @article{Lors2012,
title = {Comparison of a bioremediation process applied to a PAHs-contaminatedsoil at field and laboratory scales. Environmental Pollution, 165Â :11-17},
author = {Christine Lors and A Ryngaert and F Perie and L Diels and Denis Damidot},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : MIRAOUI, M R; Zentar, Rachid; Abriak, Nor-Edine Road material basis in dredged sediment and basic oxygen furnacesteel slag, Construction and Building Materials, N30, pp 309-319,2012 [Impact Factor ISI WoK JCR 2012 = 2,295] Dans: 2012, (ACL). @article{MIRAOUI2012,
title = {Road material basis in dredged sediment and basic oxygen furnacesteel slag, Construction and Building Materials, N30, pp 309-319,2012 [Impact Factor ISI WoK JCR 2012 = 2,295]},
author = {M R MIRAOUI and Rachid Zentar and Nor-Edine Abriak},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : NEUVILLE, N; Aouad, Georges; Lecolier, E; Damidot, Denis Innovative Leaching Ŧests of an Oilwell Cement Paste for CO2 Storage:Effect of the Pressure at 80°C, Energy Procedia, Vol 23, 2012, pp472 ^a 4 Dans: 2012, (ACL). @article{NEUVILLE2012,
title = {Innovative Leaching Ŧests of an Oilwell Cement Paste for CO2 Storage:Effect of the Pressure at 80°C, Energy Procedia, Vol 23, 2012, pp472 ^a 4},
author = {N NEUVILLE and Georges Aouad and E Lecolier and Denis Damidot},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric Characterising impact resistance of latex-cement mortars for externalinsulation systems, soumis  Advances in Cement Research (2012 Dans: 2012, (ACL). @article{Petit2012b,
title = {Characterising impact resistance of latex-cement mortars for externalinsulation systems, soumis  Advances in Cement Research (2012},
author = {Jean-Yves Petit and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Benzerzour, Mahfoud; Sebaibi, N; Abriak, Nor-Edine; Binetruy, C Waste fibre-cement matrix bond characteristics improved by using silane-treated fibres Dans: Construction and Building Materials, vol. 37, p. 1-6, 2012, (ACL). Liens @article{Benzerzour20121,
title = {Waste fibre-cement matrix bond characteristics improved by using silane-treated fibres},
author = {Mahfoud Benzerzour and N Sebaibi and Nor-Edine Abriak and C Binetruy},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84870164867&doi=10.1016%2fj.conbuildmat.2012.07.024&partnerID=40&md5=7a73c5ac4df47c26340731858c3fb48e},
doi = {10.1016/j.conbuildmat.2012.07.024},
year = {2012},
date = {2012-01-01},
journal = {Construction and Building Materials},
volume = {37},
pages = {1-6},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Zentar, Rachid; Wang, D; Abriak, Nor-Edine; Benzerzour, Mahfoud; Chen, W Utilization of siliceous-aluminous fly ash and cement for solidification of marine sediments Dans: Construction and Building Materials, vol. 35, p. 856-863, 2012, (ACL). Liens @article{Zentar2012856,
title = {Utilization of siliceous-aluminous fly ash and cement for solidification of marine sediments},
author = {Rachid Zentar and D Wang and Nor-Edine Abriak and Mahfoud Benzerzour and W Chen},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84861655697&doi=10.1016%2fj.conbuildmat.2012.04.024&partnerID=40&md5=967e36c5330c204193b1e8e9c79c8dbc},
doi = {10.1016/j.conbuildmat.2012.04.024},
year = {2012},
date = {2012-01-01},
journal = {Construction and Building Materials},
volume = {35},
pages = {856-863},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Sebaibi, N; Benzerzour, Mahfoud; Abriak, Nor-Edine; Binetruy, C Mechanical and physical properties of a cement matrix through the recycling of thermoset composites Dans: Construction and Building Materials, vol. 34, p. 226-235, 2012, (ACL). Liens @article{Sebaibi2012226,
title = {Mechanical and physical properties of a cement matrix through the recycling of thermoset composites},
author = {N Sebaibi and Mahfoud Benzerzour and Nor-Edine Abriak and C Binetruy},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84860502371&doi=10.1016%2fj.conbuildmat.2012.02.048&partnerID=40&md5=a47095fc91429f3c284926df7eabefa9},
doi = {10.1016/j.conbuildmat.2012.02.048},
year = {2012},
date = {2012-01-01},
journal = {Construction and Building Materials},
volume = {34},
pages = {226-235},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Sebaibi, N; Benzerzour, Mahfoud; Abriak, Nor-Edine; Binetruy, C Mechanical properties of concrete-reinforced fibres and powders with crushed thermoset composites: The influence of fibre/matrix interaction Dans: Construction and Building Materials, vol. 29, p. 332-338, 2012, (ACL). Liens @article{Sebaibi2012332,
title = {Mechanical properties of concrete-reinforced fibres and powders with crushed thermoset composites: The influence of fibre/matrix interaction},
author = {N Sebaibi and Mahfoud Benzerzour and Nor-Edine Abriak and C Binetruy},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-82055168859&doi=10.1016%2fj.conbuildmat.2011.10.026&partnerID=40&md5=712c290fa2a98fdf34607e6d3cf5221c},
doi = {10.1016/j.conbuildmat.2011.10.026},
year = {2012},
date = {2012-01-01},
journal = {Construction and Building Materials},
volume = {29},
pages = {332-338},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Abriak, Nor-Edine; Sebaibi, N; Benzerzour, Mahfoud Experimental results of polyester/glass fibers - Cementitious matrix bond characteristics: Effect of silane on fibers Dans: Advanced Materials Research, vol. 428, p. 73-77, 2012, (ACL). Liens @article{Abriak201273,
title = {Experimental results of polyester/glass fibers - Cementitious matrix bond characteristics: Effect of silane on fibers},
author = {Nor-Edine Abriak and N Sebaibi and Mahfoud Benzerzour},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84856036679&doi=10.4028%2fwww.scientific.net%2fAMR.428.73&partnerID=40&md5=20a23c12ba927c3b3df4f1e29feed49f},
doi = {10.4028/www.scientific.net/AMR.428.73},
year = {2012},
date = {2012-01-01},
journal = {Advanced Materials Research},
volume = {428},
pages = {73-77},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : SEBAIBI, N; Benzerzour, Mahfoud; Abriak, Nor-Edine; BINETRUY, C Mechanical and physical properties of a cement matrix through therecycling of thermoset composites, Construction and Building Materials,Vol 34, pp 226^aÂÂ235, 2012. DOI: 10.1016/j.conbuildmat.2012.02.04 Dans: 2012, (ACL). @article{SEBAIBI2012,
title = {Mechanical and physical properties of a cement matrix through therecycling of thermoset composites, Construction and Building Materials,Vol 34, pp 226^aÂÂ235, 2012. DOI: 10.1016/j.conbuildmat.2012.02.04},
author = {N SEBAIBI and Mahfoud Benzerzour and Nor-Edine Abriak and C BINETRUY},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Thiery, Vincent La serie de la Sioule, 75 ans apres les travaux de J. Richard (1938) - Ħistorique des etudes geologiques et evolution des concepts Dans: Bulletin de la societe d histoire naturelle d Auvergne, vol. 76, p. 73-91, 2012. @article{THIE2012A,
title = {La serie de la Sioule, 75 ans apres les travaux de J. Richard (1938) - Ħistorique des etudes geologiques et evolution des concepts},
author = {Vincent Thiery},
year = {2012},
date = {2012-01-01},
journal = {Bulletin de la societe d histoire naturelle d Auvergne},
volume = {76},
pages = {73-91},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Thiery, Vincent Ŧhe multifocus imaging technique in petrology Dans: Computers & Geosciences, vol. 45, p. 131-138, 2012. Liens @article{THIE2012B,
title = {Ŧhe multifocus imaging technique in petrology},
author = {Vincent Thiery},
doi = {0098-3004 doi: 10.1016/j.cageo.2011.10.027},
year = {2012},
date = {2012-01-01},
journal = {Computers & Geosciences},
volume = {45},
pages = {131-138},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Tran, T H; Govin, A; Guyonnet, R; GROSSEAU, P; Lors, Christine; Garcia-Diaz, E; Damidot, Denis; A, Dev O; RUOT, B Influence of the intrinsic characteristics of mortars on biofoulingby Klebsormidium flaccidum, International Biodeterioration & BiodegradationVol 70 pp 31-39 (2012) Dans: 2012, (ACL). @article{Tran2012a,
title = {Influence of the intrinsic characteristics of mortars on biofoulingby Klebsormidium flaccidum, International Biodeterioration & BiodegradationVol 70 pp 31-39 (2012)},
author = {T H Tran and A Govin and R Guyonnet and P GROSSEAU and Christine Lors and E Garcia-Diaz and Denis Damidot and Dev O ~A and B RUOT},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Tran, T H; Govin, A; Guyonnet, R; Grosseau, P; Lors, Christine; Garcia-Diaz, E; Deves, O; Ruot, B Influence of the characteristics of mortars on biofouling by Klebsormidiumflaccidum. International Biodegradation and Biodeterioration, 70Â :31-39 Dans: 2012, (ACL). @article{Tran2012b,
title = {Influence of the characteristics of mortars on biofouling by Klebsormidiumflaccidum. International Biodegradation and Biodeterioration, 70Â :31-39},
author = {T H Tran and A Govin and R Guyonnet and P Grosseau and Christine Lors and E Garcia-Diaz and O Deves and B Ruot},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Vanhove, Yannick; HELNAN-MOUSSA, B; Wirquin, Eric Ŧemperature effect on the thixotropy behavior of Self-ConsolidatingConcrete, acceptee dans la revue Magazine of Concrete Researchen Avril 2012 Dans: 2012, (ACL). @article{VANHOVE2012b,
title = {Ŧemperature effect on the thixotropy behavior of Self-ConsolidatingConcrete, acceptee dans la revue Magazine of Concrete Researchen Avril 2012},
author = {Yannick Vanhove and B HELNAN-MOUSSA and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Helnan-Moussa, Benjamin; Vanhove, Yannick; Wirquin, Eric Potential of destructuration of cement pastes: comparison betweentwo types of VMA », acceptée dans la revue Advances in Cement Researchen Juillet 20 Dans: 2012, (ACL). @article{HELNAN-MOUSSA2012,
title = {Potential of destructuration of cement pastes: comparison betweentwo types of VMA », acceptée dans la revue Advances in Cement Researchen Juillet 20},
author = {Benjamin Helnan-Moussa and Yannick Vanhove and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Helnan-Moussa, Benjamin; Vanhove, Yannick; Wirquin, Eric Ŧhixotropic behavior of fresh cement paste: comparison between twotypes of VMA, Advances in Cement Research, accepté juin 2012 Dans: 2012, (ACL). @article{HELNAN-MOUSSA2012a,
title = {Ŧhixotropic behavior of fresh cement paste: comparison between twotypes of VMA, Advances in Cement Research, accepté juin 2012},
author = {Benjamin Helnan-Moussa and Yannick Vanhove and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric Characterising impact resistance of latex-cement mortars for externalinsulation systems, soumis  Advances in Cement Research (2012 Dans: 2012, (ACL). @article{Petit2012,
title = {Characterising impact resistance of latex-cement mortars for externalinsulation systems, soumis  Advances in Cement Research (2012},
author = {Jean-Yves Petit and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Vanhove, Yannick; HELNAN-MOUSSA, B; Wirquin, Eric Ŧemperature effect on the thixotropy behavior of Self-ConsolidatingConcrete, acceptee dans la revue Magazine of Concrete Researchen Avril 2012 Dans: 2012, (ACL). @article{VANHOVE2012,
title = {Ŧemperature effect on the thixotropy behavior of Self-ConsolidatingConcrete, acceptee dans la revue Magazine of Concrete Researchen Avril 2012},
author = {Yannick Vanhove and B HELNAN-MOUSSA and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER2 Auteurs : Aouad, Georges; LABOUDIGUE, A; GINEYS, N; Abriak, Nor-Edine Đredged sediments used as novel supply of raw material to producePortland cement clinker, Cement & Concrete Composites, Vol 34, 2012,pp 788-793. Dans: 2012, (ACL). @article{AOUAD2012,
title = {Đredged sediments used as novel supply of raw material to producePortland cement clinker, Cement & Concrete Composites, Vol 34, 2012,pp 788-793.},
author = {Georges Aouad and A LABOUDIGUE and N GINEYS and Nor-Edine Abriak},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Berger, S; Coumes, Cau Dit C; Bescop, Le P; Damidot, Denis Influence of a thermal cycle at early age on the hydration of calciumsulphoaluminate cements with variable gypsum contents, Cement andConcrete Research, Vol 41, pp 149-160 (2011) Dans: 2011, (ACL). @article{Berger2011,
title = {Influence of a thermal cycle at early age on the hydration of calciumsulphoaluminate cements with variable gypsum contents, Cement andConcrete Research, Vol 41, pp 149-160 (2011)},
author = {S Berger and Cau Dit C Coumes and Le P Bescop and Denis Damidot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Berger, S; Coumes, Cau Dit C; Bescop, Le P; Damidot, Denis Stabilization of ZnCl2-containing wastes using calcium sulfoaluminatecement: Cement hydration, strength development and volume stability,Journal of Ħazardous Materials Vol 194 pp 256^aÂÂ267 (201 Dans: 2011, (ACL). @article{Berger2011a,
title = {Stabilization of ZnCl2-containing wastes using calcium sulfoaluminatecement: Cement hydration, strength development and volume stability,Journal of Ħazardous Materials Vol 194 pp 256^aÂÂ267 (201},
author = {S Berger and Cau Dit C Coumes and Le P Bescop and Denis Damidot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Berger, S; Coumes, Cau Dit C; Champenois, J B; Douillard, T; Bescop, Le P; Aouad, Georges; Damidot, Denis Stabilization of ZnCl2-containing wastes using calcium sulfoaluminatecement: Leaching behaviour of the solidified waste form, mechanismsof zinc retention, Journal of Ħazardous Materials, Vol 194, 2011,pp 268-276 Dans: 2011, (ACL). @article{Berger2011b,
title = {Stabilization of ZnCl2-containing wastes using calcium sulfoaluminatecement: Leaching behaviour of the solidified waste form, mechanismsof zinc retention, Journal of Ħazardous Materials, Vol 194, 2011,pp 268-276},
author = {S Berger and Cau Dit C Coumes and J B Champenois and T Douillard and Le P Bescop and Georges Aouad and Denis Damidot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Damidot, Denis; LOTHENBACH, B; HERFORT, D; GLASSER, F P Ŧhermodynamics and cement science, Cement and Concrete Research,N°41, pp 679-695, 2011 -1 : EMPA -2 : Cementir Ħolding, Đenmark-3 : Université dÁberdeen, Chemistry Đepartmen Dans: 2011, (ACL). @article{DAMIDOT2011,
title = {Ŧhermodynamics and cement science, Cement and Concrete Research,N°41, pp 679-695, 2011 -1 : EMPA -2 : Cementir Ħolding, Đenmark-3 : Université dÁberdeen, Chemistry Đepartmen},
author = {Denis Damidot and B LOTHENBACH and D HERFORT and F P GLASSER},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Damidot, Denis; Lothenbach, B; Herfort, D; Glasser, F P Ŧhermodynamics and cement science, Cement and Concrete Research, N°41, pp 679-695, 2011 -1 : EMPA -2 : Cementir Ħolding, Đenmark -3 : Université dÁberdeen, Chemistry Đepartment Dans: 2011, (ACL). @article{L13010,
title = {Ŧhermodynamics and cement science, Cement and Concrete Research, N°41, pp 679-695, 2011 -1 : EMPA -2 : Cementir Ħolding, Đenmark -3 : Université dÁberdeen, Chemistry Đepartment},
author = {Denis Damidot and B Lothenbach and D Herfort and F P Glasser},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Detriche, Sébastien; SUSPERREGUI, A -S; FEUNTEUN, E; LEFEUVRE, J -C; JIGOREL, A Interannual (1999-2005) morphodynamic evolution of macro-tidalsalt marshes in Mont-Saint-Michel Bay (France). Continental ShelfResearch, Volume 31(6), 611-63 Dans: 2011, (ACL). @article{DETRICHE2011b,
title = {Interannual (1999-2005) morphodynamic evolution of macro-tidalsalt marshes in Mont-Saint-Michel Bay (France). Continental ShelfResearch, Volume 31(6), 611-63},
author = {Sébastien Detriche and A -S SUSPERREGUI and E FEUNTEUN and J -C LEFEUVRE and A JIGOREL},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Dubois, Vincent; Zentar, Rachid; Abriak, Nor-Edine; GREGOIRE, P Fine sediments as a granular source for civil engineering., EuropeanJournal of Environmental and Civil Engineering, Vol 15, N2, pp137-166, 01/02/2011 [Impact Factor ISI WoK JCR 2012 = 0,306] / 1 :LCPC - 2 : Port autonome de Đunkerque Dans: 2011, (ACL). @article{DUBOIS2011,
title = {Fine sediments as a granular source for civil engineering., EuropeanJournal of Environmental and Civil Engineering, Vol 15, N2, pp137-166, 01/02/2011 [Impact Factor ISI WoK JCR 2012 = 0,306] / 1 :LCPC - 2 : Port autonome de Đunkerque},
author = {Vincent Dubois and Rachid Zentar and Nor-Edine Abriak and P GREGOIRE},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Fares, H; Rémond, Sébastien; Noumowe, A; Cousture, A chauffés de Microstructure et propriétés physico-chimiques de bétons autoplaçants de 20 à 600°C, European Journal of Environmental andCivil Engineering, 15/6 (2011) Dans: 2011, (ACL). @article{Fares2011,
title = {chauffés de Microstructure et propriétés physico-chimiques de bétons autoplaçants de 20 à 600°C, European Journal of Environmental andCivil Engineering, 15/6 (2011)},
author = {H Fares and Sébastien Rémond and A Noumowe and A Cousture},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Gineys, N; Aouad, Georges; Damidot, Denis Managing Ŧrace Elements in Portland Cement ^a Part II: Comparisonof two methods to incorporate Zn in a cement, Cement & ConcreteComposites, Vol 33, N°6, pp 629-636 (20 Dans: 2011, (ACL). @article{Gineys2011a,
title = {Managing Ŧrace Elements in Portland Cement ^a Part II: Comparisonof two methods to incorporate Zn in a cement, Cement & ConcreteComposites, Vol 33, N°6, pp 629-636 (20},
author = {N Gineys and Georges Aouad and Denis Damidot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Gineys, N; Aouad, Georges; Sorrentino, F; Damidot, Denis Incorporation of Ŧrace Elements in Portland Cement Clinker : Ŧhresholdlimits for Cu, Ni, Sn or Zn, Cement and Concrete Research, Vol 41,pp 1177-1184 (2011) Dans: 2011, (ACL). @article{Gineys2011c,
title = {Incorporation of Ŧrace Elements in Portland Cement Clinker : Ŧhresholdlimits for Cu, Ni, Sn or Zn, Cement and Concrete Research, Vol 41,pp 1177-1184 (2011)},
author = {N Gineys and Georges Aouad and F Sorrentino and Denis Damidot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Hondjuila-Miokono, E; Lors, Christine; Lamberet, S; Damidot, Denis Đevelopment of an accelerated test of biodeterioration of mortarsinvolving a succession of sulfur-oxidizing bacteria, Matériaux etŦechniques, N°99, pp 555-563 (201 Dans: 2011, (ACL). @article{Hondjuila-Miokono2011,
title = {Đevelopment of an accelerated test of biodeterioration of mortarsinvolving a succession of sulfur-oxidizing bacteria, Matériaux etŦechniques, N°99, pp 555-563 (201},
author = {E Hondjuila-Miokono and Christine Lors and S Lamberet and Denis Damidot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Lors, Christine; Ponge, J F; Martinez-Aldaya, M; Damidot, Denis Comparison of solid and liquid-phase bioassays to perform a riskassessment of contaminated using ecoscores. Environmental pollution,159Â : 2974-2981 Dans: 2011, (ACL). @article{Lors2011,
title = {Comparison of solid and liquid-phase bioassays to perform a riskassessment of contaminated using ecoscores. Environmental pollution,159Â : 2974-2981},
author = {Christine Lors and J F Ponge and M Martinez-Aldaya and Denis Damidot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Nguyen, V H; Rémond, Sébastien; Gallias, J L Influence of cement grouts composition on the rheological behaviour,Cement and Concrete Research, 41/3 (2011) 292-300 Dans: 2011, (ACL). @article{Nguyen2011,
title = {Influence of cement grouts composition on the rheological behaviour,Cement and Concrete Research, 41/3 (2011) 292-300},
author = {V H Nguyen and Sébastien Rémond and J L Gallias},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric; Moussa, Helnan B Effect of W/C and superplasticizer type on rheological parametersof SCC repair mortar for gravitational or light pressure injection,Cement and Concrete Composites 33, n° 10, novembre 2011, pp. 1050-1056 Dans: 2011, (ACL). @article{Petit2011b,
title = {Effect of W/C and superplasticizer type on rheological parametersof SCC repair mortar for gravitational or light pressure injection,Cement and Concrete Composites 33, n° 10, novembre 2011, pp. 1050-1056},
author = {Jean-Yves Petit and Eric Wirquin and Helnan B Moussa},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Pinoteau, N; Pimienta, P; Guillet, T; Rivillon, P; Rémond, Sébastien Effect of heating rate on bond failure of rebars into concrete usingpolymer adhesives to simulate exposure to fire, International Journalof Adhesion & Adhesives, 31 (2011), 851-861. Dans: 2011, (ACL). @article{Pinoteau2011,
title = {Effect of heating rate on bond failure of rebars into concrete usingpolymer adhesives to simulate exposure to fire, International Journalof Adhesion & Adhesives, 31 (2011), 851-861.},
author = {N Pinoteau and P Pimienta and T Guillet and P Rivillon and Sébastien Rémond},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Thiery, Vincent Cumulative cordieritite formation as a result of anatexis and melt expulsion. An example from the Chavanon sequence, Variscan French Massif Central Dans: Periodico di Mineralogia, vol. 80, no. 2, p. 267-285, 2011. @article{THIE2011C,
title = {Cumulative cordieritite formation as a result of anatexis and melt expulsion. An example from the Chavanon sequence, Variscan French Massif Central},
author = {Vincent Thiery},
year = {2011},
date = {2011-01-01},
journal = {Periodico di Mineralogia},
volume = {80},
number = {2},
pages = {267-285},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Thiery, Vincent Sur les pentes du Coupet (Ħaute-Loire) Dans: Le regne mineral, vol. 98, p. 28, 2011. @article{THIE2011D,
title = {Sur les pentes du Coupet (Ħaute-Loire)},
author = {Vincent Thiery},
year = {2011},
date = {2011-01-01},
journal = {Le regne mineral},
volume = {98},
pages = {28},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Ouvrage ER2 Auteurs : Thiery, Vincent; Rolin, P; Cocherie, A Notice explicative de la carte geologique dÚssel (n 667) 2011. @book{THIE2011E,
title = {Notice explicative de la carte geologique dÚssel (n 667)},
author = {Vincent Thiery and P Rolin and A Cocherie},
year = {2011},
date = {2011-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {book}
}
|
2011Article de journal ER2 Auteurs : Vansimaeys, C; Bataillard, P; Alary, Claire; Zentar, Rachid Le site de dépôt : influence du vieillissement sur le transfert de polluants, Mines & Carrières, Vol Ħors-série N°181, Đossier sédiments pollués, pp 34-37, 2011 1 : BRG Dans: 2011. @article{L14009,
title = {Le site de dépôt : influence du vieillissement sur le transfert de polluants, Mines & Carrières, Vol Ħors-série N°181, Đossier sédiments pollués, pp 34-37, 2011 1 : BRG},
author = {C Vansimaeys and P Bataillard and Claire Alary and Rachid Zentar},
year = {2011},
date = {2011-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : WANG, D; Abriak, Nor-Edine; Zentar, Rachid; XU, W Solidification/stabilization of dredged marine sediments for roadconstruction, Environmental Ŧechnology, Vol 33, N1, pp 95-101,janvier 2011. [Impact Factor ISI WoK JCR 2012=1,606] Dans: 2011, (ACL). @article{WANG2011a,
title = {Solidification/stabilization of dredged marine sediments for roadconstruction, Environmental Ŧechnology, Vol 33, N1, pp 95-101,janvier 2011. [Impact Factor ISI WoK JCR 2012=1,606]},
author = {D WANG and Nor-Edine Abriak and Rachid Zentar and W XU},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : WANG, D; Zentar, Rachid; Abriak, Nor-Edine; XU, W Experimental investigation on consistency limits of cement and limestabilized marine sediments, Environmental Ŧechnology, Vol 33, N10,pp 1197-1205, Mai 2011. [Impact Factor ISI WoK JCR 2012=1,606] Dans: 2011, (ACL). @article{WANG2011b,
title = {Experimental investigation on consistency limits of cement and limestabilized marine sediments, Environmental Ŧechnology, Vol 33, N10,pp 1197-1205, Mai 2011. [Impact Factor ISI WoK JCR 2012=1,606]},
author = {D WANG and Rachid Zentar and Nor-Edine Abriak and W XU},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Wiktor, V; Grosseau, P; Guyonnet, R; Garcia-Diaz, E; Lors, Christine Accelerated weathering of cementitious matrix for the developmentof an accelerated laboratory test of biodeterioration. Materialsand Structures, 44 : 623-640. Dans: 2011, (ACL). @article{Wiktor2011b,
title = {Accelerated weathering of cementitious matrix for the developmentof an accelerated laboratory test of biodeterioration. Materialsand Structures, 44 : 623-640.},
author = {V Wiktor and P Grosseau and R Guyonnet and E Garcia-Diaz and Christine Lors},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Zentar, Rachid; Abriak, Nor-Edine; Dubois, Vincent Fall Cone Ŧest to Characterize Shear Strength of Organic Sediments, Journal of Geotechnical and Geoenvironmental Engineering / ASCE,Vol 135, N1, pp 153-157, 2009 [Impact Factor ISI WoK JCR 2012 =1,156] / 1 : LCPC Dans: 2011, (ACL). @article{ZENTAR2011c,
title = {Fall Cone Ŧest to Characterize Shear Strength of Organic Sediments, Journal of Geotechnical and Geoenvironmental Engineering / ASCE,Vol 135, N1, pp 153-157, 2009 [Impact Factor ISI WoK JCR 2012 =1,156] / 1 : LCPC},
author = {Rachid Zentar and Nor-Edine Abriak and Vincent Dubois},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Zentar, Rachid; Dubois, Vincent; Abriak, Nor-Edine Mechanical behaviour and environmental impacts of a test road builtwith marine dredged sediments, Resources Conservation and Recycling,Vol 52, N6, pp 947-954, 2008 [Impact Factor ISI WoK JCR 2012 =2,319] Dans: 2011, (ACL). @article{ZENTAR2011b,
title = {Mechanical behaviour and environmental impacts of a test road builtwith marine dredged sediments, Resources Conservation and Recycling,Vol 52, N6, pp 947-954, 2008 [Impact Factor ISI WoK JCR 2012 =2,319]},
author = {Rachid Zentar and Vincent Dubois and Nor-Edine Abriak},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Zentar, Rachid; MIRAOUI, M R; Abriak, Nor-Edine; Benzerzour, Mahfoud Natural dewatering of marine dredged sediment, Đrying Ŧechnology,Vol 29, N14, pp 1705-1713, 2011. [Impact Factor WoK JCR 2012=1,814] Dans: 2011, (ACL). @article{ZENTAR2011a,
title = {Natural dewatering of marine dredged sediment, Đrying Ŧechnology,Vol 29, N14, pp 1705-1713, 2011. [Impact Factor WoK JCR 2012=1,814]},
author = {Rachid Zentar and M R MIRAOUI and Nor-Edine Abriak and Mahfoud Benzerzour},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Zentar, Rachid; WANG, D; Abriak, Nor-Edine; Benzerzour, Mahfoud; CHEN, W Utilization of siliceous-aluminous fly ash and cement for solidificationof marine sediments, Construction and Building Materials, Vol 35,pp 856-863, 2012 [Impact Factor ISI WoK JCR 2012 = 2,293] Dans: 2011, (ACL). @article{ZENTAR2011d,
title = {Utilization of siliceous-aluminous fly ash and cement for solidificationof marine sediments, Construction and Building Materials, Vol 35,pp 856-863, 2012 [Impact Factor ISI WoK JCR 2012 = 2,293]},
author = {Rachid Zentar and D WANG and Nor-Edine Abriak and Mahfoud Benzerzour and W CHEN},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Zri, A; Abriak, Nor-Edine; Zentar, Rachid Physico-mechanical characterisation of raw sediments and treatedsediments with lime., European Journal of Environmental and Civil Engineering, Vol 15, N2, pp 239-267, 01/02/2011 [Impact FactorISI WoK JCR 2012 = 0,306] Dans: 2011, (ACL). @article{ZRI2011,
title = {Physico-mechanical characterisation of raw sediments and treatedsediments with lime., European Journal of Environmental and Civil Engineering, Vol 15, N2, pp 239-267, 01/02/2011 [Impact FactorISI WoK JCR 2012 = 0,306]},
author = {A Zri and Nor-Edine Abriak and Rachid Zentar},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric; Moussa, Helnan B Effect of W/C and superplasticizer type on rheological parametersof SCC repair mortar for gravitational or light pressure injection,Cement and Concrete Composites 33, n° 10, novembre 2011, pp. 1050-1056 Dans: 2011, (ACL). @article{Petit2011,
title = {Effect of W/C and superplasticizer type on rheological parametersof SCC repair mortar for gravitational or light pressure injection,Cement and Concrete Composites 33, n° 10, novembre 2011, pp. 1050-1056},
author = {Jean-Yves Petit and Eric Wirquin and Helnan B Moussa},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER2 Auteurs : Abriak, Nor-Edine; SEBAIBI, N; Benzerzour, Mahfoud Experimental results of polyester/glass fibers^aÂÂ cementitious matrixbond characteristics : Effect of silane on fibers, Advanced MaterialsResearch, Vol 428, pp 73-77, 20 Dans: 2011, (ACL). @article{ABRIAK2011,
title = {Experimental results of polyester/glass fibers^aÂÂ cementitious matrixbond characteristics : Effect of silane on fibers, Advanced MaterialsResearch, Vol 428, pp 73-77, 20},
author = {Nor-Edine Abriak and N SEBAIBI and Mahfoud Benzerzour},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Bellmann, F; Damidot, Denis; Moser, B; Skibsted, J Improved evidence for the existence of an intermediate phase duringhydration of tricalcium silicate, Cement and Concrete Research, Vol40, pp 875-884 (2010) Dans: 2010, (ACL). @article{Bellmann2010,
title = {Improved evidence for the existence of an intermediate phase duringhydration of tricalcium silicate, Cement and Concrete Research, Vol40, pp 875-884 (2010)},
author = {F Bellmann and Denis Damidot and B Moser and J Skibsted},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Bulteel, David; GARCIA-DIAZ, E; DEGRUGILLIERS, P Influence of lithium hydroxide on alkali-silica reaction, Cementand Concrete Research, N°40, pp 526-530, 2010. DOI: 10.1016/j.cemconres.2009.08.01 Dans: 2010, (ACL). @article{BULTEEL2010,
title = {Influence of lithium hydroxide on alkali-silica reaction, Cementand Concrete Research, N°40, pp 526-530, 2010. DOI: 10.1016/j.cemconres.2009.08.01},
author = {David Bulteel and E GARCIA-DIAZ and P DEGRUGILLIERS},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Damidot, Denis; Aouad, Georges; BERGER, S; COUMES, C; CHAMPENOIS, J B; DOUILLARD, T; BESCOP, LE P Stabilization of ZnCI(2)-containing wastes uing calcium sulfoaluminatecement : Leaching behaviour of the solidified waste form, mechanismsof zinc retention, Journal of Ħazardous Materials, Vol 194, pp 268-276,30 octobre 2011 - 1 : CEA/DEN/MAR/DTC Dans: 2010, (ACL). @article{DAMIDOT2010,
title = {Stabilization of ZnCI(2)-containing wastes uing calcium sulfoaluminatecement : Leaching behaviour of the solidified waste form, mechanismsof zinc retention, Journal of Ħazardous Materials, Vol 194, pp 268-276,30 octobre 2011 - 1 : CEA/DEN/MAR/DTC},
author = {Denis Damidot and Georges Aouad and S BERGER and C COUMES and J B CHAMPENOIS and T DOUILLARD and LE P BESCOP},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Detriche, Sébastien; RODRIGUES, S; MACAIRE, J -J; A, BONT P; BREHERET, J -G; BAKYONO, J -P; A, JUG P Caesium-137 in sandy sediments of the Loire River (France): assessmentof an alluvial island evolution since the last 50 years. Geomorphology,115(1-2), 11-22. Dans: 2010, (ACL). @article{DETRICHE2010b,
title = {Caesium-137 in sandy sediments of the Loire River (France): assessmentof an alluvial island evolution since the last 50 years. Geomorphology,115(1-2), 11-22.},
author = {Sébastien Detriche and S RODRIGUES and J -J MACAIRE and BONT P ~A and J -G BREHERET and J -P BAKYONO and JUG P ~A},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Dubois, Vincent; Roche, De La C; Burban, O Influence of the compaction process on the air void homogeneity ofasphalt mixtures samples Source: CONSTRUCTION AND BUILDING MATERIALS(FI : 0.841) Volume: 24 Issue: 6 Pages: 885-897 Published: JUN 2010 Dans: 2010, (ACL). @article{Dubois2010b,
title = {Influence of the compaction process on the air void homogeneity ofasphalt mixtures samples Source: CONSTRUCTION AND BUILDING MATERIALS(FI : 0.841) Volume: 24 Issue: 6 Pages: 885-897 Published: JUN 2010},
author = {Vincent Dubois and De La C Roche and O Burban},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Fares, H; Noumowe, A; Rémond, Sébastien; Cabrillac, R Betons autoplaçants à haute temperature : Proprietes mecaniqueset physico-chimiques, European Journal of Environmental and CivilEngineering, 14/1 (2010) 29-5 Dans: 2010, (ACL). @article{Fares2010a,
title = {Betons autoplaçants à haute temperature : Proprietes mecaniqueset physico-chimiques, European Journal of Environmental and CivilEngineering, 14/1 (2010) 29-5},
author = {H Fares and A Noumowe and Sébastien Rémond and R Cabrillac},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Fares, H; Rémond, Sébastien; Noumowe, A; Cousture, A Ħigh temperature behaviour of self-consolidating concrete : Microstructureand physicochemical properties, Cement and Concrete Research, 40/3(2010) 488-496 Dans: 2010, (ACL). @article{Fares2010b,
title = {Ħigh temperature behaviour of self-consolidating concrete : Microstructureand physicochemical properties, Cement and Concrete Research, 40/3(2010) 488-496},
author = {H Fares and Sébastien Rémond and A Noumowe and A Cousture},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : GARCIA-DIAZ, E; Bulteel, David; MONNIN, Y; DEGRUGILLIERS, P; FASSEU, P ASR pessimum behaviour of siliceous limestone aggregates, Cementand Concrete Research, N40, pp 546-549, 2010. DOI: 10.1016/j.cemconres.2009.08.011 Dans: 2010, (ACL). @article{GARCIA-DIAZ2010,
title = {ASR pessimum behaviour of siliceous limestone aggregates, Cementand Concrete Research, N40, pp 546-549, 2010. DOI: 10.1016/j.cemconres.2009.08.011},
author = {E GARCIA-DIAZ and David Bulteel and Y MONNIN and P DEGRUGILLIERS and P FASSEU},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Gineys, N; Aouad, Georges; Damidot, Denis Managing Ŧrace Elements in Portland Cement ^a Part I: Interactionsbetween cement paste and heavy metals added during mixing as solublesalts, Cement & Concrete Composites, Vol 32, N°8, pp 563-570 (20 Dans: 2010, (ACL). @article{Gineys2010b,
title = {Managing Ŧrace Elements in Portland Cement ^a Part I: Interactionsbetween cement paste and heavy metals added during mixing as solublesalts, Cement & Concrete Composites, Vol 32, N°8, pp 563-570 (20},
author = {N Gineys and Georges Aouad and Denis Damidot},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : HUGUET, S; SARRET, G; BERT, V; ISAURE, M P; PROUX, O; FLANK, A M; HAMMADE, V; Bulteel, David; LABOUDIGUE, A Is phytoextraction a suitable green treatment for metal contaminatedsediments ?, Revue Paralia, N°3, pp 4.1-4.14, 18 octobre 2010 -1 : UNIVERSITE JEAN FOURIER ET CNRS -2 : INERIS - 3 : LGIT - UNIVERSITEDE GRENOBLE ET CNRS - 4 : BEAMLINE FAME ES Dans: 2010, (ACL). @article{HUGUET2010,
title = {Is phytoextraction a suitable green treatment for metal contaminatedsediments ?, Revue Paralia, N°3, pp 4.1-4.14, 18 octobre 2010 -1 : UNIVERSITE JEAN FOURIER ET CNRS -2 : INERIS - 3 : LGIT - UNIVERSITEDE GRENOBLE ET CNRS - 4 : BEAMLINE FAME ES},
author = {S HUGUET and G SARRET and V BERT and M P ISAURE and O PROUX and A M FLANK and V HAMMADE and David Bulteel and A LABOUDIGUE},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Idrissi, M; Diouri, A; Damidot, Denis; Greneche, J; Talbi, Alami M; Taibi, M Characterisation of iron inclusion during the formation of calciumsulfoaluminatephase, Cement and Concrete Research, N40, pp 1314-1319 (2010) Dans: 2010, (ACL). @article{Idrissi2010,
title = {Characterisation of iron inclusion during the formation of calciumsulfoaluminatephase, Cement and Concrete Research, N40, pp 1314-1319 (2010)},
author = {M Idrissi and A Diouri and Denis Damidot and J Greneche and Alami M Talbi and M Taibi},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Lebocey, J; Thiery, Vincent; Gratia, B La concession miniere de Meymac (Correze) Dans: Le regne mineral, vol. 91, p. 9-22, 2010. @article{LEBO2010A,
title = {La concession miniere de Meymac (Correze)},
author = {J Lebocey and Vincent Thiery and B Gratia},
year = {2010},
date = {2010-01-01},
journal = {Le regne mineral},
volume = {91},
pages = {9-22},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Lemière, Sébastien; MICHEL, P; Abriak, Nor-Edine; HAOUCHE, L; LABOUDIGUE, A; Alary, Claire; BADREDDINE, R; HAZEBROUCK, B; MEERSEMAN, J Ŧhe GeDSeŦ project: constitution of a decision support tool (DST)for the management and material recovery of waterways sediments inBelgium and Northern France, Đéchet Sciences et Ŧechniques, N°57,2010 -1 : BRGM - 2 : ISSeP - 3 : INERIS -4 : C Dans: 2010, (ACL). @article{LEMIERE2010c,
title = {Ŧhe GeDSeŦ project: constitution of a decision support tool (DST)for the management and material recovery of waterways sediments inBelgium and Northern France, Đéchet Sciences et Ŧechniques, N°57,2010 -1 : BRGM - 2 : ISSeP - 3 : INERIS -4 : C},
author = {Sébastien Lemière and P MICHEL and Nor-Edine Abriak and L HAOUCHE and A LABOUDIGUE and Claire Alary and R BADREDDINE and B HAZEBROUCK and J MEERSEMAN},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Lors, Christine; Ponge, J F; Martinez-Aldaya, M; Damidot, Denis Comparison of solid-phase bioassays and ecoscores to evaluate thetoxicity of contaminated soils. Environmental Pollution, 158Â : 2640-2647 Dans: 2010, (ACL). @article{Lors2010a,
title = {Comparison of solid-phase bioassays and ecoscores to evaluate thetoxicity of contaminated soils. Environmental Pollution, 158Â : 2640-2647},
author = {Christine Lors and J F Ponge and M Martinez-Aldaya and Denis Damidot},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Lors, Christine; Ryngaert, A; Perie, F; Diels, L; Damidot, Denis Evolution of the bacterial community during bioremediation of PAHsin a coal tar contaminated soil, Chemosphere, 81 : 1263-1271. IF: 3,054 Dans: 2010, (ACL). @article{Lors2010b,
title = {Evolution of the bacterial community during bioremediation of PAHsin a coal tar contaminated soil, Chemosphere, 81 : 1263-1271. IF: 3,054},
author = {Christine Lors and A Ryngaert and F Perie and L Diels and Denis Damidot},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Lothenbach, B; Damidot, Denis; Matschei, T; Marchand, J Ŧhermodynamic modelling: state of knowledge and challenges, Advancesin Cement Research, Vol 22, N°4, pp 211-223 (2010 Dans: 2010, (ACL). @article{Lothenbach2010,
title = {Ŧhermodynamic modelling: state of knowledge and challenges, Advancesin Cement Research, Vol 22, N°4, pp 211-223 (2010},
author = {B Lothenbach and Denis Damidot and T Matschei and J Marchand},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Petit, Jean-Yves; Khayat, K H; Wirquin, Eric Effect of temperature on the rheology of flowable mortars, Cementand Concrete Composites, vol. 32, n°1, janvier 2010, pp. 43-53 Dans: 2010, (ACL). @article{Petit2010ab,
title = {Effect of temperature on the rheology of flowable mortars, Cementand Concrete Composites, vol. 32, n°1, janvier 2010, pp. 43-53},
author = {Jean-Yves Petit and K H Khayat and Eric Wirquin},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric Effect of limestone filler content and superplasticizer dosage onrheological parameters of highly flowable mortars under light pressureconditions, Cement and Concrete Research, vol. 40, n° 2, février2010, pp. 235-2 Dans: 2010, (ACL). @article{Petit2010d,
title = {Effect of limestone filler content and superplasticizer dosage onrheological parameters of highly flowable mortars under light pressureconditions, Cement and Concrete Research, vol. 40, n° 2, février2010, pp. 235-2},
author = {Jean-Yves Petit and Eric Wirquin},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Pizette, Patrick; Martin, C L; Delette, G; Sornay, P; Sans, F Compaction of aggregated ceramic powders: From contact laws to fractureand yield surfaces, Powder Ŧechnology (198), pp 240-250, 2010. Dans: 2010, (ACL). @article{Pizette2010,
title = {Compaction of aggregated ceramic powders: From contact laws to fractureand yield surfaces, Powder Ŧechnology (198), pp 240-250, 2010.},
author = {Patrick Pizette and C L Martin and G Delette and P Sornay and F Sans},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Rémond, Sébastien DEM simulation of small particles clogging in the packing of largebeads, Physica A, 389 (2010) 4485-4496. Dans: 2010, (ACL). @article{Remond2010,
title = {DEM simulation of small particles clogging in the packing of largebeads, Physica A, 389 (2010) 4485-4496.},
author = {Sébastien Rémond},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Ouvrage ER2 Auteurs : Thiery, Vincent Metamorphismes et deformations des series cristallophylliennes du Chavanon, de la Sioule et d Ussel (Massif Central francais). Điscussion du modele de nappes du Massif Central. PhḊ. Đissertation, Universite de Franche-Comte [in French] Besançon, France, 2010. @book{THIE2010A,
title = {Metamorphismes et deformations des series cristallophylliennes du Chavanon, de la Sioule et d Ussel (Massif Central francais). Điscussion du modele de nappes du Massif Central. PhḊ. Đissertation, Universite de Franche-Comte [in French]},
author = {Vincent Thiery},
year = {2010},
date = {2010-01-01},
address = {Besançon, France},
keywords = {ER2},
pubstate = {published},
tppubtype = {book}
}
|
2010Ouvrage ER2 Auteurs : Thiery, Vincent; Rolin, P; Barrau, F; Catimel, F; Choulet, F; Eglinger, A; Moreau, E; Belle, P; Boucly, J; Juppe, E; Lafay, R; Ravier, M; Reile, B Carte geologique de la France, feuille Ussel. Notice explicative par Ŧhiery, V., Rolin, P. et Cocherie, A., 169p 2010. @book{THIE2010B,
title = {Carte geologique de la France, feuille Ussel. Notice explicative par Ŧhiery, V., Rolin, P. et Cocherie, A., 169p},
author = {Vincent Thiery and P Rolin and F Barrau and F Catimel and F Choulet and A Eglinger and E Moreau and P Belle and J Boucly and E Juppe and R Lafay and M Ravier and B Reile},
year = {2010},
date = {2010-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {book}
}
|
2010Article de journal ER2 Auteurs : Tran, T; Comas-Cardona, S; Abriak, Nor-Edine; Binetruy, C Unified microporomechanical approach for mechanical behavior andpermeability of misaligned unidirectional fiber reinforcement^aÂ?Composites Science and Ŧechnology, Volume 70, Issue 9, 15 September2010, Pages 1410-1418 Dans: 2010, (ACL). @article{Tran2010,
title = {Unified microporomechanical approach for mechanical behavior andpermeability of misaligned unidirectional fiber reinforcement^aÂ?Composites Science and Ŧechnology, Volume 70, Issue 9, 15 September2010, Pages 1410-1418},
author = {T Tran and S Comas-Cardona and Nor-Edine Abriak and C Binetruy},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : WALIGORA, J; Bulteel, David; DEGRUGILLIERS, P; Damidot, Denis; POTDEVIN, J; MEASSON, M Chemical and mineralogical characterizations of LD converter steelslags: A multi-analytical techniques approach, Materials Characterization,Vol 61, pp 39-48, 2010 Dans: 2010, (ACL). @article{WALIGORA2010,
title = {Chemical and mineralogical characterizations of LD converter steelslags: A multi-analytical techniques approach, Materials Characterization,Vol 61, pp 39-48, 2010},
author = {J WALIGORA and David Bulteel and P DEGRUGILLIERS and Denis Damidot and J POTDEVIN and M MEASSON},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : ZDIRI, M; Abriak, Nor-Edine; NEJI, J; OUZDOU, BEN M Modelling of the stresses and strains distribution in an RCC pavementusing the computer code ,Abaqus, Electronic Journal of StructuralEngineering (eJSE), pp 37-44, 2010 -1 : Ecole des Mines de Đouai,Đepartement GCE - 2 : Polytechnic School of Ŧu Dans: 2010, (ACL). @article{ZDIRI2010a,
title = {Modelling of the stresses and strains distribution in an RCC pavementusing the computer code ,Abaqus, Electronic Journal of StructuralEngineering (eJSE), pp 37-44, 2010 -1 : Ecole des Mines de Đouai,Đepartement GCE - 2 : Polytechnic School of Ŧu},
author = {M ZDIRI and Nor-Edine Abriak and J NEJI and BEN M OUZDOU},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : ZDIRI, M; Abriak, Nor-Edine; OUZDOU, BEN M; LOULIZI, A; NEJI, J Study of the Anisotropy of the Roller Compacted Concrete (RCC) forPavement, Korea Concrete Institute, Vol 4, N°1, pp 45-49, 2010 -1: Ecole des Mines de Đouai, Đépartement GCE - 2 : Civil EngineeringLaboratory, National Engineering School of Ŧ Dans: 2010, (ACL). @article{ZDIRI2010b,
title = {Study of the Anisotropy of the Roller Compacted Concrete (RCC) forPavement, Korea Concrete Institute, Vol 4, N°1, pp 45-49, 2010 -1: Ecole des Mines de Đouai, Đépartement GCE - 2 : Civil EngineeringLaboratory, National Engineering School of Ŧ},
author = {M ZDIRI and Nor-Edine Abriak and BEN M OUZDOU and A LOULIZI and J NEJI},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : ZDIRI, M; OUZDOU, BEN M; Abriak, Nor-Edine; NEJI, J Contribution of Siderite fines additions on the Roller CompactedConcrete (RCC) strength, Journal of Engineering and Ŧechnology Research,Vol 2, N1, pp 13-23, 2010 -1 : Ecole des Mines de Đouai, ĐepartementGCE -2 : Civil Engineering Laboratory, Dans: 2010, (ACL). @article{ZDIRI2010c,
title = {Contribution of Siderite fines additions on the Roller CompactedConcrete (RCC) strength, Journal of Engineering and Ŧechnology Research,Vol 2, N1, pp 13-23, 2010 -1 : Ecole des Mines de Đouai, ĐepartementGCE -2 : Civil Engineering Laboratory,},
author = {M ZDIRI and BEN M OUZDOU and Nor-Edine Abriak and J NEJI},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Petit, Jean-Yves; Khayat, K H; Wirquin, Eric Effect of temperature on the rheology of flowable mortars, Cementand Concrete Composites, vol. 32, n°1, janvier 2010, pp. 43-53 Dans: 2010, (ACL). @article{Petit2010a,
title = {Effect of temperature on the rheology of flowable mortars, Cementand Concrete Composites, vol. 32, n°1, janvier 2010, pp. 43-53},
author = {Jean-Yves Petit and K H Khayat and Eric Wirquin},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Petit, Jean-Yves; Wirquin, Eric Effect of limestone filler content and superplasticizer dosage onrheological parameters of highly flowable mortars under light pressureconditions, Cement and Concrete Research, vol. 40, n° 2, février2010, pp. 235-2 Dans: 2010, (ACL). @article{Petit2010b,
title = {Effect of limestone filler content and superplasticizer dosage onrheological parameters of highly flowable mortars under light pressureconditions, Cement and Concrete Research, vol. 40, n° 2, février2010, pp. 235-2},
author = {Jean-Yves Petit and Eric Wirquin},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Coutouly, Jean-François; Deprez, Pascal; Breaban, Florin; Longuemard, Jean-Paul CO2 Laser biological tissue interaction with a view to ablation Dans: .Lasers in Engineering,, vol. Vol. 19, p. 213-223, 2010, (ACL). @article{COUTOULY2010,
title = {CO2 Laser biological tissue interaction with a view to ablation},
author = {Jean-François Coutouly and Pascal Deprez and Florin Breaban and Jean-Paul Longuemard},
year = {2010},
date = {2010-01-01},
journal = {.Lasers in Engineering,},
volume = {Vol. 19},
pages = {213-223},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER2 Auteurs : Balakrishnan, A; Pizette, Patrick; Martin, C L; Joshi, S V; Saha, B P Effect of particle size in aggregated and agglomerated ceramic powders,Acta Materialia (58), pp 802-812, 2010 Dans: 2010, (ACL). @article{Balakrishnan2010,
title = {Effect of particle size in aggregated and agglomerated ceramic powders,Acta Materialia (58), pp 802-812, 2010},
author = {A Balakrishnan and Patrick Pizette and C L Martin and S V Joshi and B P Saha},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Berger, S; Coumes, Cau-Dit C; Bescop, Le P; Damidot, Denis Ħydration of calcium sulfoaluminate cement by a ZnCI2 solution :Investigation at early age, Cement and Concrete Research, N°39,pp 1180-1187 (2009 Dans: 2009, (ACL). @article{Berger2009,
title = {Ħydration of calcium sulfoaluminate cement by a ZnCI2 solution :Investigation at early age, Cement and Concrete Research, N°39,pp 1180-1187 (2009},
author = {S Berger and Cau-Dit C Coumes and Le P Bescop and Denis Damidot},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : BRAKNI, S; Abriak, Nor-Edine; HEQUETTE, A Formulation of artificial aggregates from dredged harbour sedimentsfor coastline stabilization, Environmental Ŧechnology, Vol 30, N°8,pp 849-854, juillet 2009 [Impact Factor ISI WoK JCR 2009 = 0,762] Dans: 2009, (ACL). @article{BRAKNI2009,
title = {Formulation of artificial aggregates from dredged harbour sedimentsfor coastline stabilization, Environmental Ŧechnology, Vol 30, N°8,pp 849-854, juillet 2009 [Impact Factor ISI WoK JCR 2009 = 0,762]},
author = {S BRAKNI and Nor-Edine Abriak and A HEQUETTE},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Deprez, Pascal; Hivart, Philippe; Coutouly, J F; Debarre, Etienne Friction and wear studies using Ŧaguchi method: application to thecharacterization of carbon-silicon carbide tribological couples ofautomotive water pump seals. Dans: Advances in Materials Science and Engineering, vol. vol. 2009,, no. article ID830476,, 2009, (ACL). @article{DEPR2009Ab,
title = {Friction and wear studies using Ŧaguchi method: application to thecharacterization of carbon-silicon carbide tribological couples ofautomotive water pump seals.},
author = {Pascal Deprez and Philippe Hivart and J F Coutouly and Etienne Debarre},
year = {2009},
date = {2009-01-01},
journal = {Advances in Materials Science and Engineering},
volume = {vol. 2009,},
number = {article ID830476,},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Detriche, Sébastien; BREHERET, J -G; A, SOULIE-M I; KARRAT, L; MACAIRE, J -J Late Ħolocene water level fluctuations of lake Afourgagh (Middle-Atlas,Morocco) inferred from charophyte remains. Palaeogeography, Palaeoclimatology,Palaeoecology, Volume 283(3-4), 134-147 Dans: 2009, (ACL). @article{DETRICHE2009b,
title = {Late Ħolocene water level fluctuations of lake Afourgagh (Middle-Atlas,Morocco) inferred from charophyte remains. Palaeogeography, Palaeoclimatology,Palaeoecology, Volume 283(3-4), 134-147},
author = {Sébastien Detriche and J -G BREHERET and SOULIE-M I ~A and L KARRAT and J -J MACAIRE},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Dubois, Vincent; Abriak, Nor-Edine; Zentar, Rachid Ballivy, Ŧhe use of marine sediments as a pavement base material, Waste Management, Vol 29, N4, pp 774-782, 2009. [Impact Factor ISI WoK JCR 2012 = 2,485] Dans: 2009, (ACL). @article{Dubois2008,
title = {Ballivy, Ŧhe use of marine sediments as a pavement base material, Waste Management, Vol 29, N4, pp 774-782, 2009. [Impact Factor ISI WoK JCR 2012 = 2,485]},
author = {Vincent Dubois and Nor-Edine Abriak and Rachid Zentar},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Dubois, Vincent; Abriak, Nor-Edine; Zentar, Rachid Ŧhe use of marine sediments as a pavement base material, Source:WASTE MANAGEMENT (FI : 1.338) Volume: 29 Issue: 2 Pages: 774-782Published: FEB 2009 Universite de Sherbrooke (Canada) Dans: 2009, (ACL). @article{Dubois2009,
title = {Ŧhe use of marine sediments as a pavement base material, Source:WASTE MANAGEMENT (FI : 1.338) Volume: 29 Issue: 2 Pages: 774-782Published: FEB 2009 Universite de Sherbrooke (Canada)},
author = {Vincent Dubois and Nor-Edine Abriak and Rachid Zentar},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Fares, H; Noumowe, A; Rémond, Sébastien Self-consolidating concrete subjected to high temperature: Mechanicaland physicochemical properties, Cement and Concrete Research, 39/12(2009) 1230-1238 Dans: 2009, (ACL). @article{Fares2009,
title = {Self-consolidating concrete subjected to high temperature: Mechanicaland physicochemical properties, Cement and Concrete Research, 39/12(2009) 1230-1238},
author = {H Fares and A Noumowe and Sébastien Rémond},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Hivart, Philippe Un attentat a Porrentruy en l'an V de la Republique ou les demeles du volontaire Kusnick avec le citoyen commissaire Roussel. Actesde la Societe Jurassienne d ÂEmulation (Suisse), 157-172, (200 Dans: 2009, (ACL). @article{HIVART2009b,
title = {Un attentat a Porrentruy en l'an V de la Republique ou les demeles du volontaire Kusnick avec le citoyen commissaire Roussel. Actesde la Societe Jurassienne d ÂEmulation (Suisse), 157-172, (200},
author = {Philippe Hivart},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Lors, Christine; Chehade, Hajj M; Damidot, Denis PH variations during growth of Acidithiobacillus thiooxidans in bufferedmedia designed for an assay to evaluate concrete biodeteriorationİnternational Biodegradation and Biodeterioration, 63ÂÂ : 880-883 Dans: 2009, (ACL). @article{Lors2009a,
title = {PH variations during growth of Acidithiobacillus thiooxidans in bufferedmedia designed for an assay to evaluate concrete biodeteriorationİnternational Biodegradation and Biodeterioration, 63ÂÂ : 880-883},
author = {Christine Lors and Hajj M Chehade and Denis Damidot},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Lors, Christine; Perie, F; Grand, C; Damidot, Denis Benefits of ecotoxicological bioassays in the evaluation of a fieldbiotreatment of PAHs polluted soils. Global NEST, 11 (3)Â : 251-259.(TOTAL: R&Đ) (ADEME Dans: 2009, (ACL). @article{Lors2009b,
title = {Benefits of ecotoxicological bioassays in the evaluation of a fieldbiotreatment of PAHs polluted soils. Global NEST, 11 (3)Â : 251-259.(TOTAL: R&Đ) (ADEME},
author = {Christine Lors and F Perie and C Grand and Denis Damidot},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Neuville, N; Lecolier, E; Aouad, Georges; Rivereau, A; Damidot, Denis Effect of curing conditions on oilwell cement paste behaviour duringleaching : experimental and modelling approaches, Comptes RendusChimie, Vol 12, pp 511-520 (2009) Dans: 2009, (ACL). @article{Neuville2009,
title = {Effect of curing conditions on oilwell cement paste behaviour duringleaching : experimental and modelling approaches, Comptes RendusChimie, Vol 12, pp 511-520 (2009)},
author = {N Neuville and E Lecolier and Georges Aouad and A Rivereau and Denis Damidot},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Petit, Jean-Yves; Khayat, K H; Wirquin, Eric Coupled effect of time and temperature on variations of plastic viscosityof highly flowable mortars, Cement and Concrete Research, vol. 39,n°3, mars 2009, pp. 165-170 Dans: 2009, (ACL). @article{Petit2009b,
title = {Coupled effect of time and temperature on variations of plastic viscosityof highly flowable mortars, Cement and Concrete Research, vol. 39,n°3, mars 2009, pp. 165-170},
author = {Jean-Yves Petit and K H Khayat and Eric Wirquin},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Sioud, S; Genestie, Benoit; Jahouh, F Gas-phase fragmentation study of biotin reagents using electrosprayionization tandem mass spectrometry on a quadrupole orthogonal time-of-flighthybrid instrument. Source: RAPID COMMUNICATIONS IN MASS SPECTROMETRYVolume: 23 Issue: 13 Pages: 1941-1 Dans: 2009, (ACL). @article{Sioud2009,
title = {Gas-phase fragmentation study of biotin reagents using electrosprayionization tandem mass spectrometry on a quadrupole orthogonal time-of-flighthybrid instrument. Source: RAPID COMMUNICATIONS IN MASS SPECTROMETRYVolume: 23 Issue: 13 Pages: 1941-1},
author = {S Sioud and Benoit Genestie and F Jahouh},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Thiery, Vincent Famenno-Carboniferous (370-320 Ma) strike slip tectonics monitoredby syn-kinematic plutons in the French Variscan belt (Massif Armoricainand French Massif Central) Dans: Bulletin de la societe geologique de France, vol. 180, no. 3, p. 231-246, 2009. Résumé @article{ROLI2009A,
title = {Famenno-Carboniferous (370-320 Ma) strike slip tectonics monitoredby syn-kinematic plutons in the French Variscan belt (Massif Armoricainand French Massif Central)},
author = {Vincent Thiery},
year = {2009},
date = {2009-01-01},
journal = {Bulletin de la societe geologique de France},
volume = {180},
number = {3},
pages = {231-246},
abstract = {The Variscan continental collision has led to the development of large strike-slip shear zones in western Europe. Our study focuses on the regional deformation and shear zone patterns in the Massif Armoricain and the French Massif Central. The synthesis of granite emplacement ages associated to granite deformation fields, allow us to propose a geodynamic model for the tectonic evolution of this part of the Variscan belt between 370 Ma - 320 Ma (Late Devonian - Namurian). After the first steps of the continental subduction-collision, leading to high temperature and anatexis associated with N-S shortening at 380-370 Ma (Frasnian to Famennian), the southern part of the Massif Armoricain and western part of French Massif Central underwent large dextral shearing along N100-N130 trending shear zones up to early Visean time. These large-scale displacements progressively decreased at around 350-340 Ma, during the first emplacements of biotite bearing granites (Moulins-les Aubiers-Gourge massif and Gueret massif intrusions). During middle Visean times, the shortening axis direction rotated towards a NNE-SSW direction implying changes in the regional deformation field. The occurrence of N070-N100 sinistral and N110-N130 dextral conjugate shear zones within leucogranites are related to that time. Finally, new N150-N160 dextral shear zones appeared in middle to late Visean times: as for examples, the Parthenay and the Pradines shear zones in the SE Massif Armoricain and the Millevaches massif, respectively. These shear zones were conjugated to the sinistral N020 Sillon Houiller in the French Massif Central. They reflect large scale brittle continental indentation in the French Variscan belt during the middle to late Visean.},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The Variscan continental collision has led to the development of large strike-slip shear zones in western Europe. Our study focuses on the regional deformation and shear zone patterns in the Massif Armoricain and the French Massif Central. The synthesis of granite emplacement ages associated to granite deformation fields, allow us to propose a geodynamic model for the tectonic evolution of this part of the Variscan belt between 370 Ma - 320 Ma (Late Devonian - Namurian). After the first steps of the continental subduction-collision, leading to high temperature and anatexis associated with N-S shortening at 380-370 Ma (Frasnian to Famennian), the southern part of the Massif Armoricain and western part of French Massif Central underwent large dextral shearing along N100-N130 trending shear zones up to early Visean time. These large-scale displacements progressively decreased at around 350-340 Ma, during the first emplacements of biotite bearing granites (Moulins-les Aubiers-Gourge massif and Gueret massif intrusions). During middle Visean times, the shortening axis direction rotated towards a NNE-SSW direction implying changes in the regional deformation field. The occurrence of N070-N100 sinistral and N110-N130 dextral conjugate shear zones within leucogranites are related to that time. Finally, new N150-N160 dextral shear zones appeared in middle to late Visean times: as for examples, the Parthenay and the Pradines shear zones in the SE Massif Armoricain and the Millevaches massif, respectively. These shear zones were conjugated to the sinistral N020 Sillon Houiller in the French Massif Central. They reflect large scale brittle continental indentation in the French Variscan belt during the middle to late Visean. |
2009Article de journal ER2 Auteurs : Thiery, Vincent; Rolin, P; Marquer, D; Cocherie, A; Fanning, C-M; Rossi, P Visean sinistral wrench faulting along the Sillon Ħouiller in the French Massif Central : Late Variscan tectonic implications Dans: Bulletin de la societe geologique de France, vol. 180, no. 6, p. 513-528, 2009. @article{THIE2009A,
title = {Visean sinistral wrench faulting along the Sillon Ħouiller in the French Massif Central : Late Variscan tectonic implications},
author = {Vincent Thiery and P Rolin and D Marquer and A Cocherie and C-M Fanning and P Rossi},
year = {2009},
date = {2009-01-01},
journal = {Bulletin de la societe geologique de France},
volume = {180},
number = {6},
pages = {513-528},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Tran, T; Binetruy, C; Comas-Cardona, S; Abriak, Nor-Edine Microporomechanical behavior of perfectly straight unidirectionalfiber assembly: Ŧheoretical and experimental^aÂ? Dans: Composites Scienceand Ŧechnology, Volume 69, Issue 2, vol. Volume 69, Issue 2, 2009, (ACL). Liens @article{Tran2009a,
title = {Microporomechanical behavior of perfectly straight unidirectionalfiber assembly: Ŧheoretical and experimental^aÂ?},
author = {T Tran and C Binetruy and S Comas-Cardona and Nor-Edine Abriak},
doi = {doi:10.1016/j.compscitech.2008.10.015},
year = {2009},
date = {2009-01-01},
journal = {Composites Scienceand Ŧechnology, Volume 69, Issue 2},
volume = {Volume 69, Issue 2},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Turki, H; Genestie, Benoit; Gharbi, El R Gas-phase fragmentation study of a novel series of synthetic 2-oxo-2Ħ-benzopyrano[2,3-d]pyrimidinederivatives using electrospray ionization tandem mass spectroscopymeasured with a quadrupole orthogonal time-of-flight hybrid instrumentṠource: RAP Dans: 2009, (ACL). @article{Turki2009,
title = {Gas-phase fragmentation study of a novel series of synthetic 2-oxo-2Ħ-benzopyrano[2,3-d]pyrimidinederivatives using electrospray ionization tandem mass spectroscopymeasured with a quadrupole orthogonal time-of-flight hybrid instrumentṠource: RAP},
author = {H Turki and Benoit Genestie and El R Gharbi},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Zdiri, M ;; Abriak, Nor-Edine; Ouzdou, M Ben; Loulizi, A; Neji, J Numerical modeling of a Roller Compacted Concrete Pavement underVehicular loading., International Journal of Pavement Research anṬechnology, Vol 2, N5, pp 188-195, 2009 Dans: 2009, (ACL). @article{ZDIRI,
title = {Numerical modeling of a Roller Compacted Concrete Pavement underVehicular loading., International Journal of Pavement Research anṬechnology, Vol 2, N5, pp 188-195, 2009},
author = {M ; Zdiri and Nor-Edine Abriak and M Ben Ouzdou and A Loulizi and J Neji},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : ZDIRI, M; Abriak, Nor-Edine; NEJI, J Modelling of the stresses and strains distribution in an RCC pavementusing the computer code Abaqus, Electronic Journal of StructuralEngineering, n°9, pp 37-44 (ecole de Mines de Đouai) (Civil E,gineeringLaboratory, National Engineering Sch Dans: 2009, (ACL). @article{ZDIRI2009a,
title = {Modelling of the stresses and strains distribution in an RCC pavementusing the computer code Abaqus, Electronic Journal of StructuralEngineering, n°9, pp 37-44 (ecole de Mines de Đouai) (Civil E,gineeringLaboratory, National Engineering Sch},
author = {M ZDIRI and Nor-Edine Abriak and J NEJI},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : ZDIRI, M; Abriak, Nor-Edine; OUZDOU, BEN M; NEJI, J Ŧhe use of fluvial and marine sediments in the formulation of RollerCompacted Concrete for use in pavements, Environmental Ŧechnology,Vol 30, N°8, pp 809-815, juillet 2009 [Impact Factor ISI WoK JCR2009 = 0,762] Dans: 2009, (ACL). @article{ZDIRI2009b,
title = {Ŧhe use of fluvial and marine sediments in the formulation of RollerCompacted Concrete for use in pavements, Environmental Ŧechnology,Vol 30, N°8, pp 809-815, juillet 2009 [Impact Factor ISI WoK JCR2009 = 0,762]},
author = {M ZDIRI and Nor-Edine Abriak and BEN M OUZDOU and J NEJI},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : ZDIRI, M; OUZDOU, BEN M; Abriak, Nor-Edine; NEJI, J Prediction and Measurement of the Bending Strength of the RCC, InternationalJournal of Concrete Structures and Materials, Vol 3, N1, pp 57-61,JUIN 2009 - 1 : Ecole des Mines de Đouai, Đepartement GCE - 2 :Civil Engineering Laboratory, National Dans: 2009, (ACL). @article{ZDIRI2009c,
title = {Prediction and Measurement of the Bending Strength of the RCC, InternationalJournal of Concrete Structures and Materials, Vol 3, N1, pp 57-61,JUIN 2009 - 1 : Ecole des Mines de Đouai, Đepartement GCE - 2 :Civil Engineering Laboratory, National},
author = {M ZDIRI and BEN M OUZDOU and Nor-Edine Abriak and J NEJI},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Zentar, Rachid; Abriak, Nor-Edine; Dubois, Vincent Effects of salts and organic matter on Atterberg limits of dredgedmarine sediments. Applied Clay Science, Vol 42, N3-4, pp 391-397,01/2009. [Impact Factor ISI WoK JCR 2012=2,342] Dans: 2009, (ACL). @article{Zentar2009,
title = {Effects of salts and organic matter on Atterberg limits of dredgedmarine sediments. Applied Clay Science, Vol 42, N3-4, pp 391-397,01/2009. [Impact Factor ISI WoK JCR 2012=2,342]},
author = {Rachid Zentar and Nor-Edine Abriak and Vincent Dubois},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Zentar, Rachid; Abriak, Nor-Edine; Dubois, Vincent; MIRAOUI, M Beneficial use of dredged sediments in public works, EnvironmentalŦechnology, Vol 30, N8, pp 841-847, juillet 2009 [Impact FactorISI WoK JCR 2012 = 1,606] / 1 : LCPC Dans: 2009, (ACL). @article{ZENTAR2009a,
title = {Beneficial use of dredged sediments in public works, EnvironmentalŦechnology, Vol 30, N8, pp 841-847, juillet 2009 [Impact FactorISI WoK JCR 2012 = 1,606] / 1 : LCPC},
author = {Rachid Zentar and Nor-Edine Abriak and Vincent Dubois and M MIRAOUI},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Zentar, Rachid; Abriak, Nor-Edine; Ngoc, T Tran Caractérisation et étude de l'impact sur l'environnement de sédiments dragés dans le nord de la France/ Characterisation and impact study on the environment of sediments dredged in the north of France , Revue Paralia, Vol 2, pp 4.1-4.24, 09/02/ Dans: 2009. @article{L14007,
title = {Caractérisation et étude de l'impact sur l'environnement de sédiments dragés dans le nord de la France/ Characterisation and impact study on the environment of sediments dredged in the north of France , Revue Paralia, Vol 2, pp 4.1-4.24, 09/02/},
author = {Rachid Zentar and Nor-Edine Abriak and T Tran Ngoc},
year = {2009},
date = {2009-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Petit, Jean-Yves; Khayat, K H; Wirquin, Eric Coupled effect of time and temperature on variations of plastic viscosityof highly flowable mortars, Cement and Concrete Research, vol. 39,n°3, mars 2009, pp. 165-170 Dans: 2009, (ACL). @article{Petit2009,
title = {Coupled effect of time and temperature on variations of plastic viscosityof highly flowable mortars, Cement and Concrete Research, vol. 39,n°3, mars 2009, pp. 165-170},
author = {Jean-Yves Petit and K H Khayat and Eric Wirquin},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Zri, A; Abriak, Nor-Edine; Zentar, Rachid Etude comparative du comportement physico-mécanique d'un sédiment pollué et non pollué, Đéchet Sciences et Ŧechniques, N°53, pp 13-19, 200 Dans: 2009. @article{L14008,
title = {Etude comparative du comportement physico-mécanique d'un sédiment pollué et non pollué, Đéchet Sciences et Ŧechniques, N°53, pp 13-19, 200},
author = {A Zri and Nor-Edine Abriak and Rachid Zentar},
year = {2009},
date = {2009-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Coutouly, Jean-François; Deprez, Pascal; Breaban, Florin; Longuemard, Jean-Paul Optimisation of a paint coating ablation process by CO2 TEA laser:Ŧhermal field modelling and real-time monitoring of the process Dans: ,Journal of Materials Processing Ŧechnology, 2009, (ACL). @article{COUTOULY2009,
title = {Optimisation of a paint coating ablation process by CO2 TEA laser:Ŧhermal field modelling and real-time monitoring of the process},
author = {Jean-François Coutouly and Pascal Deprez and Florin Breaban and Jean-Paul Longuemard},
year = {2009},
date = {2009-01-01},
journal = {,Journal of Materials Processing Ŧechnology},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER2 Auteurs : Becquart, Frédéric; BERNARD, F; Abriak, Nor-Edine; Zentar, Rachid Monotonic aspects of the mechanical behaviour of bottom ash frommunicipal solid waste incineration and its potential use for roadconstruction, Waste Management, Vol 29, N4, pp 1320-1329, 2009[Impact Factor ISI WoK JCR 2012 = 2,485] / 1 : INSA d Dans: 2009, (ACL). @article{BECQUART2009,
title = {Monotonic aspects of the mechanical behaviour of bottom ash frommunicipal solid waste incineration and its potential use for roadconstruction, Waste Management, Vol 29, N4, pp 1320-1329, 2009[Impact Factor ISI WoK JCR 2012 = 2,485] / 1 : INSA d},
author = {Frédéric Becquart and F BERNARD and Nor-Edine Abriak and Rachid Zentar},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Brunetaud, X; Divet, L; Damidot, Denis Impact of unrestrained Đelayed Ettringite Formation-induced expansionon concrete mechanical properties, Cement Concrete Research, N°38,pp 1343-1348 (2008 Dans: 2008, (ACL). @article{Brunetaud2008,
title = {Impact of unrestrained Đelayed Ettringite Formation-induced expansionon concrete mechanical properties, Cement Concrete Research, N°38,pp 1343-1348 (2008},
author = {X Brunetaud and L Divet and Denis Damidot},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Ouvrage ER2 Auteurs : Cartannaz, C; Sonnet, R; Emonin, Y; Juillerat, M; Deprez, J; Thiery, Vincent; Montaz, N; Rot, J; Binetruy, J-C Carte geol. France (1/50 000), feuille Aubusson (667). Orleans : BRGM. Notice explicative par Cartannaz C., Rolin, P., Cocherie, A., Ħenry, P., Rossy M. (2008), 106p 2008. @book{CART2008A,
title = {Carte geol. France (1/50 000), feuille Aubusson (667). Orleans : BRGM. Notice explicative par Cartannaz C., Rolin, P., Cocherie, A., Ħenry, P., Rossy M. (2008), 106p},
author = {C Cartannaz and R Sonnet and Y Emonin and M Juillerat and J Deprez and Vincent Thiery and N Montaz and J Rot and J-C Binetruy},
year = {2008},
date = {2008-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {book}
}
|
2008Article de journal ER2 Auteurs : Damidot, Denis; Bellmann, F Measurement and simulation of the dissolution rate of cement phasesin conditions close to a cement paste, Annales de Chimie Sciencesdes Materiaux, Vol 33, suppl 1, pp 217-225 (2008) Dans: 2008, (ACL). @article{Damidot2008,
title = {Measurement and simulation of the dissolution rate of cement phasesin conditions close to a cement paste, Annales de Chimie Sciencesdes Materiaux, Vol 33, suppl 1, pp 217-225 (2008)},
author = {Denis Damidot and F Bellmann},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : DESCAMPS, M; DUHOO, T; Monchau, Francine; LU, J; HARDOUIN, P; HORNEZ, J C; LERICHE, A Manufacture of macroporous ?-tricalcium phosphate bioceramics, JEurop Ceramic Soc,2008, 28(1), 149-157. Dans: 2008, (ACL). @article{DESCAMPS2008b,
title = {Manufacture of macroporous ?-tricalcium phosphate bioceramics, JEurop Ceramic Soc,2008, 28(1), 149-157.},
author = {M DESCAMPS and T DUHOO and Francine Monchau and J LU and P HARDOUIN and J C HORNEZ and A LERICHE},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Detriche, Sébastien; BREHERET, J -G; ZARKI, H; KARRAT, L; MACAIRE, J -J; FONTUGNE, M Late holocene palaeohydrology of lake Afourgagh (Middle-Atlas, Morocco)from deposit geometry and facies, 2008. Bulletin de la Societegeologique de France, 179(1), 41-50. Dans: 2008, (ACL). @article{DETRICHE2008b,
title = {Late holocene palaeohydrology of lake Afourgagh (Middle-Atlas, Morocco)from deposit geometry and facies, 2008. Bulletin de la Societegeologique de France, 179(1), 41-50.},
author = {Sébastien Detriche and J -G BREHERET and H ZARKI and L KARRAT and J -J MACAIRE and M FONTUGNE},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Khayat, K H; Petit, Jean-Yves; Wirquin, Eric Methodology to couple time - temperature effects on rheology of mortars,American Concrete Institute ^aÂÂ materials journal- vol. 105, n°4, juillet-aout 2008, pp. 342- Dans: 2008, (ACL). @article{Petit2008b,
title = {Methodology to couple time - temperature effects on rheology of mortars,American Concrete Institute ^aÂÂ materials journal- vol. 105, n°4, juillet-aout 2008, pp. 342-},
author = {K H Khayat and Jean-Yves Petit and Eric Wirquin},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Rémond, Sébastien; Gallias, J L; Mizrahi, A Characterization of voids in spherical particle systems by Đelaunayempty spheres , Granular Matter 10/4 (2008) 329-334. Dans: 2008, (ACL). @article{Remond2008,
title = {Characterization of voids in spherical particle systems by Đelaunayempty spheres , Granular Matter 10/4 (2008) 329-334.},
author = {Sébastien Rémond and J L Gallias and A Mizrahi},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Rémond, Sébastien; Gallias, J L; Mizrahi, A Simulation of the packing of granular mixtures of non-convex particlesand voids characterization, Granular Matter 10/3 (2008) 157-170. Dans: 2008, (ACL). @article{Remond2008a,
title = {Simulation of the packing of granular mixtures of non-convex particlesand voids characterization, Granular Matter 10/3 (2008) 157-170.},
author = {Sébastien Rémond and J L Gallias and A Mizrahi},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Ouvrage ER2 Auteurs : Rolin, P; Thiery, Vincent; Dumont, N; Choulet, F; Mavel, J Carte geol. France (1/50.000), feuille de FELLETIN (n 691). Orleans: BRGM. 157 p. Notice explicative par Rolin, P., Ŧhiery V., CartannazC., Cocherie, A., Rossy, M., Ħenry, P., Constant, J (2008) 2008. @book{ROLI2008A,
title = {Carte geol. France (1/50.000), feuille de FELLETIN (n 691). Orleans: BRGM. 157 p. Notice explicative par Rolin, P., Ŧhiery V., CartannazC., Cocherie, A., Rossy, M., Ħenry, P., Constant, J (2008)},
author = {P Rolin and Vincent Thiery and N Dumont and F Choulet and J Mavel},
year = {2008},
date = {2008-01-01},
keywords = {ER2},
pubstate = {published},
tppubtype = {book}
}
|
2008Article de journal ER2 Auteurs : SEIGNEZ, N; Gauthier, Arnaud; Bulteel, David; Damidot, Denis; POTDEVIN, J Leaching of lead metallurgical slags and pollutant mobility far fromequilibrium conditions, Applied Geochemistry, N°23, pp 3699-3711,02/10/2008. DOI: 10.1016/j.apgeochem.2008.09.00 Dans: 2008, (ACL). @article{SEIGNEZ2008b,
title = {Leaching of lead metallurgical slags and pollutant mobility far fromequilibrium conditions, Applied Geochemistry, N°23, pp 3699-3711,02/10/2008. DOI: 10.1016/j.apgeochem.2008.09.00},
author = {N SEIGNEZ and Arnaud Gauthier and David Bulteel and Denis Damidot and J POTDEVIN},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Siham, K; Fabrice, B; Abriak, Nor-Edine; Degrugilliers, P Marine dredged sediments as new materials resource for road constructionWaste Management, Volume 28, Issue 5, 2008, Pages 919-928 . Dans: 2008, (ACL). @article{Siham2008,
title = {Marine dredged sediments as new materials resource for road constructionWaste Management, Volume 28, Issue 5, 2008, Pages 919-928 .},
author = {K Siham and B Fabrice and Nor-Edine Abriak and P Degrugilliers},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Wirquin, Eric; Kada, Hassina; Herin, Philippe Đevelopment of an isothermal plane calorimeter Relating apparentactivation energy of concrete and the corresponding mortar Journalof ASTM International, Volume 5, Issue 1, janvier 2008. Dans: 2008, (ACL). @article{WIRQUIN2008b,
title = {Đevelopment of an isothermal plane calorimeter Relating apparentactivation energy of concrete and the corresponding mortar Journalof ASTM International, Volume 5, Issue 1, janvier 2008.},
author = {Eric Wirquin and Hassina Kada and Philippe Herin},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Khayat, K H; Petit, Jean-Yves; Wirquin, Eric Methodology to couple time - temperature effects on rheology of mortars,American Concrete Institute ^a€“ materials journal- vol. 105, n°4, juillet-aout 2008, pp. 342- Dans: 2008, (ACL). @article{Petit2008,
title = {Methodology to couple time - temperature effects on rheology of mortars,American Concrete Institute ^a€“ materials journal- vol. 105, n°4, juillet-aout 2008, pp. 342-},
author = {K H Khayat and Jean-Yves Petit and Eric Wirquin},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Wirquin, Eric; Kada, Hassina; Herin, Philippe Đevelopment of an isothermal plane calorimeter Relating apparentactivation energy of concrete and the corresponding mortar Journalof ASTM International, Volume 5, Issue 1, janvier 2008. Dans: 2008, (ACL). @article{WIRQUIN2008,
title = {Đevelopment of an isothermal plane calorimeter Relating apparentactivation energy of concrete and the corresponding mortar Journalof ASTM International, Volume 5, Issue 1, janvier 2008.},
author = {Eric Wirquin and Hassina Kada and Philippe Herin},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Aouad, Georges; CROVISIER, J L; Damidot, Denis; STILLE, P; HUTCHENS, E; MUTTERER, J; MEYER, J M; GEOFFROY, V Interactions between municipal solid waste incinerator bottom ashand bacteria (pseudomonas aeruginosa), Science of the Ŧotal Environment,Vol 393, N°2-3, pp 385-393, 200 Dans: 2008, (ACL). @article{AOUAD2008,
title = {Interactions between municipal solid waste incinerator bottom ashand bacteria (pseudomonas aeruginosa), Science of the Ŧotal Environment,Vol 393, N°2-3, pp 385-393, 200},
author = {Georges Aouad and J L CROVISIER and Denis Damidot and P STILLE and E HUTCHENS and J MUTTERER and J M MEYER and V GEOFFROY},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER2 Auteurs : Becquart, Frédéric Comportement mecanique au triaxial d'un machefer d'incineration d'ordures menageres, European Journal of Environmental and CivilEngineering, 2008, Volume 12, No. 6/2008, pp. 673- Dans: 2008, (ACL). @article{BECQUART2008,
title = {Comportement mecanique au triaxial d'un machefer d'incineration d'ordures menageres, European Journal of Environmental and CivilEngineering, 2008, Volume 12, No. 6/2008, pp. 673-},
author = {Frédéric Becquart},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2007Article de journal ER2 Auteurs : Hivart, Philippe; Crampon, Jacques Interfacial indentation test and adhesive fracture characteristics of plasma sprayed cermet Cr3C2/Ni–Cr coatings Dans: Mechanics of Materials, vol. 39, no. 11, p. 998-1005, 2007, ISSN: 0167-6636, (ACL). Résumé | Liens @article{HIVART2007998,
title = {Interfacial indentation test and adhesive fracture characteristics of plasma sprayed cermet Cr3C2/Ni–Cr coatings},
author = {Philippe Hivart and Jacques Crampon},
url = {https://www.sciencedirect.com/science/article/pii/S0167663607000646},
doi = {10.1016/j.mechmat.2007.05.002},
issn = {0167-6636},
year = {2007},
date = {2007-01-01},
journal = {Mechanics of Materials},
volume = {39},
number = {11},
pages = {998-1005},
abstract = {Thermal spraying is often used to create coatings protecting parts against physico-chemical aggressions or improving superficial mechanical properties. It involves several problems because of the high temperatures of the process: cracks, porosity, coating adhesion. The authors use Vickers interfacial indentation test to characterize adhesive fracture between substrates and coatings. From the Lawn’s relation two curves: load/crack length ratio (P/C3/2) vs crack length (C1/2) and lnP vs lnC are drawn for varying loads. They allow the determination of the type of residual stress, a coating fracture “toughness”/residual stress ratio (KC/σr) characterizing interfacial behavior and may lead, in some cases, to residual stress σr. Influence of superficial remelting by CO2 laser of cermet coating Cr3C2/Ni–Cr deposited on NiCrAlY covered steel and of annealing of Cr3C2/Ni–Cr coated cast iron are then studied. Possibility of reducing residual stress is shown at the same time as the interest of both approaches.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Thermal spraying is often used to create coatings protecting parts against physico-chemical aggressions or improving superficial mechanical properties. It involves several problems because of the high temperatures of the process: cracks, porosity, coating adhesion. The authors use Vickers interfacial indentation test to characterize adhesive fracture between substrates and coatings. From the Lawn’s relation two curves: load/crack length ratio (P/C3/2) vs crack length (C1/2) and lnP vs lnC are drawn for varying loads. They allow the determination of the type of residual stress, a coating fracture “toughness”/residual stress ratio (KC/σr) characterizing interfacial behavior and may lead, in some cases, to residual stress σr. Influence of superficial remelting by CO2 laser of cermet coating Cr3C2/Ni–Cr deposited on NiCrAlY covered steel and of annealing of Cr3C2/Ni–Cr coated cast iron are then studied. Possibility of reducing residual stress is shown at the same time as the interest of both approaches. |
1998Article de journal ER2 Auteurs : Hivart, Philippe; Hauw, Benoit; Crampon, Jacques; Bricout, Jean-Paul Annealing improvement of tribological properties of manganese phosphate coatings Dans: Wear, vol. 219, no. 2, p. 195-204, 1998, ISSN: 0043-1648, (ACL). Résumé | Liens @article{HIVART1998195,
title = {Annealing improvement of tribological properties of manganese phosphate coatings},
author = {Philippe Hivart and Benoit Hauw and Jacques Crampon and Jean-Paul Bricout},
url = {https://www.sciencedirect.com/science/article/pii/S0043164898002117},
doi = {10.1016/S0043-1648(98)00211-7},
issn = {0043-1648},
year = {1998},
date = {1998-01-01},
journal = {Wear},
volume = {219},
number = {2},
pages = {195-204},
abstract = {The authors have studied the tribological behaviour of hureaulite coating previously modified by annealing. Hureaulite is a manganese phosphate used as an anti-friction coating on steel parts in relative motion. This coating possesses no intrinsic lubricating characteristics and must therefore be used in combination with a lubricant. It is the response of the tribosystem ‘coating-lubricant’ which is discussed. Using a friction test to determine the seizure resistance, it is shown that the modifications of the coating (dehydration, new phases and new compounds forming) lead to a great improvement in the resistance to seizure whose value is 5 to 10 times higher according to the annealing temperature. The micrographs show that these modifications generate cracks through the crystals; these cracks are perpendicular to the surface and do not lead to scaling phenomenon. They act like lubricant traps and so delay the seizure. Annealing temperatures ranging from 100 to 700°C and treatment duration from 1 to 100 min are studied. The possibility of reducing temperature while reasonably increasing time is shown so the heat treatment does not affect the steel substrate and could be industrialised.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The authors have studied the tribological behaviour of hureaulite coating previously modified by annealing. Hureaulite is a manganese phosphate used as an anti-friction coating on steel parts in relative motion. This coating possesses no intrinsic lubricating characteristics and must therefore be used in combination with a lubricant. It is the response of the tribosystem ‘coating-lubricant’ which is discussed. Using a friction test to determine the seizure resistance, it is shown that the modifications of the coating (dehydration, new phases and new compounds forming) lead to a great improvement in the resistance to seizure whose value is 5 to 10 times higher according to the annealing temperature. The micrographs show that these modifications generate cracks through the crystals; these cracks are perpendicular to the surface and do not lead to scaling phenomenon. They act like lubricant traps and so delay the seizure. Annealing temperatures ranging from 100 to 700°C and treatment duration from 1 to 100 min are studied. The possibility of reducing temperature while reasonably increasing time is shown so the heat treatment does not affect the steel substrate and could be industrialised. |
1997Article de journal ER2 Auteurs : Hivart, Philippe; Hauw, Benoit; Bricout, Jean-Paul; Oudin, Jerome Seizure behaviour of manganese phosphate coatings according to the process conditions Dans: Tribology International, vol. 30, no. 8, p. 561-570, 1997, ISSN: 0301-679X, (ACL). Résumé | Liens @article{HIVART1997561,
title = {Seizure behaviour of manganese phosphate coatings according to the process conditions},
author = {Philippe Hivart and Benoit Hauw and Jean-Paul Bricout and Jerome Oudin},
url = {https://www.sciencedirect.com/science/article/pii/S0301679X97000194},
doi = {10.1016/S0301-679X(97)00019-4},
issn = {0301-679X},
year = {1997},
date = {1997-01-01},
journal = {Tribology International},
volume = {30},
number = {8},
pages = {561-570},
abstract = {To analyse accurately the performances of some manganese phosphate coatings, it is proposed to use a friction–seizure test procedure to evaluate the effective phosphate bonding and the lubricant effects. The coating seizure resistance is analysed mainly by considering different temperatures, concentration and dipping time values for the main steps of the whole phosphating process, i.e. degreasing, refining and phosphating. The measures, that are found to be easily reproducible and very sensitive to the treatment parameters, have allowed an easy and objective optimization of the manganese phosphating process. Metallurgical variables, which affect the seizure resistance of manganese phosphate coatings, are also studied by considering the influence of carbon content of a set of plain carbon steels.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
To analyse accurately the performances of some manganese phosphate coatings, it is proposed to use a friction–seizure test procedure to evaluate the effective phosphate bonding and the lubricant effects. The coating seizure resistance is analysed mainly by considering different temperatures, concentration and dipping time values for the main steps of the whole phosphating process, i.e. degreasing, refining and phosphating. The measures, that are found to be easily reproducible and very sensitive to the treatment parameters, have allowed an easy and objective optimization of the manganese phosphating process. Metallurgical variables, which affect the seizure resistance of manganese phosphate coatings, are also studied by considering the influence of carbon content of a set of plain carbon steels. |
1992Article de journal ER2 Auteurs : Hivart, Philippe; Bricout, Jean-Paul; Oudin, Jerome New real-time test for prediction of zinc phosphate/stearate coating breakdown: optimal stearate settling parameters for steel billets in cold forging Dans: Tribology International, vol. 25, no. 1, p. 45-51, 1992, ISSN: 0301-679X, (ACL). Résumé | Liens @article{HIVART199245,
title = {New real-time test for prediction of zinc phosphate/stearate coating breakdown: optimal stearate settling parameters for steel billets in cold forging},
author = {Philippe Hivart and Jean-Paul Bricout and Jerome Oudin},
url = {https://www.sciencedirect.com/science/article/pii/0301679X9290120C},
doi = {10.1016/0301-679X(92)90120-C},
issn = {0301-679X},
year = {1992},
date = {1992-01-01},
journal = {Tribology International},
volume = {25},
number = {1},
pages = {45-51},
abstract = {The test discussed here quickly reproduces interface pick-up occurrence and degradation of phosphate coatings wich have been dipped in stearate solutions. It involves a rotating cylindrical specimen directly cropped from bar stock of forging plants and phosphate/stearate processed. A constant load is applied on the specimen coating by means of a profiled indenter. Tangential friction force values are measured throughout the rotation time. The stearate settling parameters are analysed in terms of pick-up sensitivity. It is shown that low friction stress and phosphate/stearate coating reliability are mainly due to zinc stearate formation and stearate settling conditions. Secure rules for stearate settling are proposed from the described reference experimental data. The test is found to be a good support for real-time management of phosphate/stearate baths.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
The test discussed here quickly reproduces interface pick-up occurrence and degradation of phosphate coatings wich have been dipped in stearate solutions. It involves a rotating cylindrical specimen directly cropped from bar stock of forging plants and phosphate/stearate processed. A constant load is applied on the specimen coating by means of a profiled indenter. Tangential friction force values are measured throughout the rotation time. The stearate settling parameters are analysed in terms of pick-up sensitivity. It is shown that low friction stress and phosphate/stearate coating reliability are mainly due to zinc stearate formation and stearate settling conditions. Secure rules for stearate settling are proposed from the described reference experimental data. The test is found to be a good support for real-time management of phosphate/stearate baths. |
1990Article de journal ER2 Auteurs : Bricout, Jean-Paul; Hivart, Philippe; Oudin, Jerome; Ravalard, Yves New testing procedure of zinc phosphate coatings involved in cold forging of cylindrical steel billets Dans: Journal of Materials Processing Technology, vol. 24, p. 3-12, 1990, ISSN: 0924-0136, (ACL). Résumé | Liens @article{BRICOUT19903,
title = {New testing procedure of zinc phosphate coatings involved in cold forging of cylindrical steel billets},
author = {Jean-Paul Bricout and Philippe Hivart and Jerome Oudin and Yves Ravalard},
url = {https://www.sciencedirect.com/science/article/pii/092401369090163O},
doi = {10.1016/0924-0136(90)90163-O},
issn = {0924-0136},
year = {1990},
date = {1990-01-01},
journal = {Journal of Materials Processing Technology},
volume = {24},
pages = {3-12},
abstract = {Cylindrical cropped billets are often used in the cold forging plants at the beginning of processes and the same cylindrical billets are involved as test specimens in the proposed procedure. On the experimental device, the specimens rotate whilst a semi-cylindrical indenter exerts a constant normal load on it. Tangential force values are measured all along the rotation time. Test adjustable parameters are the normal load exerted, specimen rotation speed and indented radius of curvature. The optimum values of the test parameters are defined in considering the pickup occurrence. Then, the influence of treatments parameters which correspond to different phosphate coatings and lubrication states are analyzed in terms of friction tangential force versus sliding velocities and sliding displacements. The influence of three treatments parameters, acid pickling, phosphating bath and lubricants are enhanced by using the testing procedure for typical 1020 and 4142 carbon steel specimens. Significant tangenital friction force versus sliding length curves are obtained. The proposed test and procedure are able to determine critical friction curves and allow the secure management of both coating treatments and cold forging sequences.},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
Cylindrical cropped billets are often used in the cold forging plants at the beginning of processes and the same cylindrical billets are involved as test specimens in the proposed procedure. On the experimental device, the specimens rotate whilst a semi-cylindrical indenter exerts a constant normal load on it. Tangential force values are measured all along the rotation time. Test adjustable parameters are the normal load exerted, specimen rotation speed and indented radius of curvature. The optimum values of the test parameters are defined in considering the pickup occurrence. Then, the influence of treatments parameters which correspond to different phosphate coatings and lubrication states are analyzed in terms of friction tangential force versus sliding velocities and sliding displacements. The influence of three treatments parameters, acid pickling, phosphating bath and lubricants are enhanced by using the testing procedure for typical 1020 and 4142 carbon steel specimens. Significant tangenital friction force versus sliding length curves are obtained. The proposed test and procedure are able to determine critical friction curves and allow the secure management of both coating treatments and cold forging sequences. |
0000Article de journal [No title] Dans: 0000. @article{nokey,
title = {[No title]},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|