2024Article de journal ER5 Auteurs : Szymanik, Barbara; Keo, Sam Ang; Brachelet, Franck; Defer, Didier Investigation of Carbon Fiber Reinforced Polymer Concrete Reinforcement Ageing Using Microwave Infrared Thermography Method Applied Sciences, vol. 14, no. 10, p. 4331, 2024, (ACL). @article{szymanik:hal-04586644,
title = {Investigation of Carbon Fiber Reinforced Polymer Concrete Reinforcement Ageing Using Microwave Infrared Thermography Method},
author = {Barbara Szymanik and Sam Ang Keo and Franck Brachelet and Didier Defer},
url = {https://hal.science/hal-04586644},
doi = {10.3390/app14104331},
year = {2024},
date = {2024-05-01},
urldate = {2024-05-01},
journal = {Applied Sciences},
volume = {14},
number = {10},
pages = {4331},
publisher = {Multidisciplinary digital publishing institute (MDPI)},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2024Article de journal ER5 Auteurs : Bitar, Rina; Youssef, Nicolas; Chamoin, Julien; Chehade, Fadi Hage; Defer, Didier Simultaneous Energy Optimization of Heating Systems by Multi-Zone Predictive Control-Application to a Residential Building Buildings, 2024, (ACL). @article{bitar:hal-04734040,
title = {Simultaneous Energy Optimization of Heating Systems by Multi-Zone Predictive Control-Application to a Residential Building},
author = {Rina Bitar and Nicolas Youssef and Julien Chamoin and Fadi Hage Chehade and Didier Defer},
url = {https://hal.science/hal-04734040},
doi = {10.3390/buildings14103241},
year = {2024},
date = {2024-10-01},
urldate = {2024-10-01},
journal = {Buildings},
publisher = {MDPI},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2023Article de journal ER5 Auteurs : Keo, Sam Ang; Szymanik, Barbara; Roy, Claire Le; Brachelet, Franck; Defer, Didier Defect Detection in CFRP Concrete Reinforcement Using the Microwave Infrared Thermography (MIRT) Method-A Numerical Modeling and Experimental Approach Applied Sciences, vol. 13, no. 14, p. 8393, 2023, (ACL). @article{keo:hal-04167029,
title = {Defect Detection in CFRP Concrete Reinforcement Using the Microwave Infrared Thermography (MIRT) Method-A Numerical Modeling and Experimental Approach},
author = {Sam Ang Keo and Barbara Szymanik and Claire Le Roy and Franck Brachelet and Didier Defer},
url = {https://hal.science/hal-04167029},
doi = {10.3390/app13148393},
year = {2023},
date = {2023-07-01},
urldate = {2023-07-01},
journal = {Applied Sciences},
volume = {13},
number = {14},
pages = {8393},
publisher = {Multidisciplinary digital publishing institute (MDPI)},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2022Article de journal ER5 Auteurs : Abdellatif, Makram; Chamoin, Julien; Nianga, Jean-Marie; Defer, Didier A thermal control methodology based on a machine learning forecasting model for indoor heating Energy and Buildings, vol. 255, p. 111692, 2022, ISSN: 0378-7788, (ACL). @article{ABDELLATIF2022111692,
title = {A thermal control methodology based on a machine learning forecasting model for indoor heating},
author = {Makram Abdellatif and Julien Chamoin and Jean-Marie Nianga and Didier Defer},
url = {https://www.sciencedirect.com/science/article/pii/S0378778821009762},
doi = {https://doi.org/10.1016/j.enbuild.2021.111692},
issn = {0378-7788},
year = {2022},
date = {2022-01-01},
urldate = {2022-01-01},
journal = {Energy and Buildings},
volume = {255},
pages = {111692},
abstract = {To take advantage of the data generated in buildings, this document proposes a methodology based on a machine learning model to improve thermal comfort and energy efficiency. This methodology uses measured data (e.g., indoor/outdoor temperature, relative humidity, etc.) and forecast data (e.g., meteorological data) to train a multiple linear regression model to forecast the indoor temperature of the space under study. Using the genetic algorithm optimization method, this model is then used to evaluate the different heating strategies generated. For each strategy, a score is assigned according to user-defined criteria in order to prioritize them and select the best one. By studying an office building simulated under the TRNSYS software, a multiple linear regression model was implemented with errors less than 1% and an adjusted R2 coefficient close to 0.9. Compared to a conventional heating strategy, this methodology can improve thermal comfort by up to 43%.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
To take advantage of the data generated in buildings, this document proposes a methodology based on a machine learning model to improve thermal comfort and energy efficiency. This methodology uses measured data (e.g., indoor/outdoor temperature, relative humidity, etc.) and forecast data (e.g., meteorological data) to train a multiple linear regression model to forecast the indoor temperature of the space under study. Using the genetic algorithm optimization method, this model is then used to evaluate the different heating strategies generated. For each strategy, a score is assigned according to user-defined criteria in order to prioritize them and select the best one. By studying an office building simulated under the TRNSYS software, a multiple linear regression model was implemented with errors less than 1% and an adjusted R2 coefficient close to 0.9. Compared to a conventional heating strategy, this methodology can improve thermal comfort by up to 43%. |
2022Article de journal ER5 Auteurs : Keo, Sam Ang; Brachelet, Franck; Defer, Didier; Breaban, Florin Detection of Concrete Cover of Reinforcements in Reinforced Concrete Wall by Microwave Thermography with Transmission Approach Applied Sciences, vol. 12, no. 19, 2022, ISSN: 2076-3417, (ACL). @article{app12199865,
title = {Detection of Concrete Cover of Reinforcements in Reinforced Concrete Wall by Microwave Thermography with Transmission Approach},
author = {Sam Ang Keo and Franck Brachelet and Didier Defer and Florin Breaban},
url = {https://www.mdpi.com/2076-3417/12/19/9865},
doi = {10.3390/app12199865},
issn = {2076-3417},
year = {2022},
date = {2022-01-01},
urldate = {2022-01-01},
journal = {Applied Sciences},
volume = {12},
number = {19},
abstract = {Concrete cover has an important role in reinforced concrete (RC) structures because it protects reinforcement bars from the bad effects of weather, fire, and bad environmental conditions that cause the corrosion of the reinforcements. Although it is an essential parameter to be considered for structural health monitoring (SHM), its detection by infrared thermography, especially in the heating phase, has not been accessed yet. The detailed analysis and discussions of physical phenomena, known as diffraction and interference, affecting the thermograms during the detection of the steel bars by microwave thermography have given an essential key for resolving this issue. The present paper proposes an innovative methodology with microwave thermography for determining the concrete cover thickness of one-layer reinforcements (12 mm in diameter and regularly placed at 10 cm) in an RC wall (1 m × 1m × 6.5 cm). By using the transmission approach with five angles of microwave antenna direction (0°, 15°, 30°, 45°, and 60°) and the Snell-Descartes law and linear law, the proposed methodology leads us to deduce the approximate value of the concrete cover thickness (37.74 mm), which is close to the real value (38 mm), as well as the spacing of the steel bars and dielectric constant of the concrete. The detection of the concrete cover thickness is another new remarkable achievement of infrared thermography methods.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
Concrete cover has an important role in reinforced concrete (RC) structures because it protects reinforcement bars from the bad effects of weather, fire, and bad environmental conditions that cause the corrosion of the reinforcements. Although it is an essential parameter to be considered for structural health monitoring (SHM), its detection by infrared thermography, especially in the heating phase, has not been accessed yet. The detailed analysis and discussions of physical phenomena, known as diffraction and interference, affecting the thermograms during the detection of the steel bars by microwave thermography have given an essential key for resolving this issue. The present paper proposes an innovative methodology with microwave thermography for determining the concrete cover thickness of one-layer reinforcements (12 mm in diameter and regularly placed at 10 cm) in an RC wall (1 m × 1m × 6.5 cm). By using the transmission approach with five angles of microwave antenna direction (0°, 15°, 30°, 45°, and 60°) and the Snell–Descartes law and linear law, the proposed methodology leads us to deduce the approximate value of the concrete cover thickness (37.74 mm), which is close to the real value (38 mm), as well as the spacing of the steel bars and dielectric constant of the concrete. The detection of the concrete cover thickness is another new remarkable achievement of infrared thermography methods. |
2022Proceedings Article ER5 Auteurs : Keo, Sam Ang; Szymanik, Barbara; Brachelet, Franck; Defer, Didier; Yune, Chan-Young Structural Health Monitoring of Civil Engineering Structures by Active Infrared Thermography Methods Second International Conference in Construction Engineering, November 28-30, held in hybrid mode at the Higher Institute of Earthquake Studies and Research (HIESR)- Damascus university-Syria, Damascus, Syria, 2022, (ACTI). @inproceedings{keo:hal-03912737,
title = {Structural Health Monitoring of Civil Engineering Structures by Active Infrared Thermography Methods},
author = {Sam Ang Keo and Barbara Szymanik and Franck Brachelet and Didier Defer and Chan-Young Yune},
url = {https://hal.archives-ouvertes.fr/hal-03912737},
year = {2022},
date = {2022-11-01},
urldate = {2022-11-01},
booktitle = {Second International Conference in Construction Engineering, November 28-30, held in hybrid mode at the Higher Institute of Earthquake Studies and Research (HIESR)- Damascus university-Syria},
address = {Damascus, Syria},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2021Article de journal ER5 Auteurs : Kenai, Mohamed-Amine; Libessart, Laurent; Lassue, Stéphane; Defer, Didier Impact of green walls occultation on energy balance: Development of a TRNSYS model on a brick masonry house Journal of Building Engineering, vol. 44, p. 102634, 2021. @article{Kenai2021,
title = {Impact of green walls occultation on energy balance: Development of a TRNSYS model on a brick masonry house},
author = {Mohamed-Amine Kenai and Laurent Libessart and Stéphane Lassue and Didier Defer},
doi = {10.1016/j.jobe.2021.102634},
year = {2021},
date = {2021-12-01},
journal = {Journal of Building Engineering},
volume = {44},
pages = {102634},
publisher = {Elsevier BV},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2021Article de journal ER5 Auteurs : Zalewski, Laurent; Biteau-Ailhas, Elorn; Defer, Didier; Brachelet, Franck Active Thermal Method Applied to the In Situ Characterization of Insulating Materials in a Wall Buildings, vol. 11, no. 12, p. 578, 2021, (ACL). @article{Zalewski2021,
title = {Active Thermal Method Applied to the In Situ Characterization of Insulating Materials in a Wall},
author = {Laurent Zalewski and Elorn Biteau-Ailhas and Didier Defer and Franck Brachelet},
url = {https://hal.archives-ouvertes.fr/hal-03505527},
doi = {10.3390/buildings11120578},
year = {2021},
date = {2021-12-01},
urldate = {2021-12-01},
journal = {Buildings},
volume = {11},
number = {12},
pages = {578},
publisher = {MDPI},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2020Article de journal ER5 Auteurs : Kenai, Mohamed-Amine; Libessart, Laurent; Lassue, Stephane; Defer, Didier Impact of plants obscuration on energy balance : Theoretical and numerical study Journal of Building Engineering, vol. 29, p. 101112, 2020, ISSN: 2352-7102. @article{KENAI2020101112,
title = {Impact of plants obscuration on energy balance : Theoretical and numerical study},
author = {Mohamed-Amine Kenai and Laurent Libessart and Stephane Lassue and Didier Defer},
url = {http://www.sciencedirect.com/science/article/pii/S2352710219318248},
doi = {https://doi.org/10.1016/j.jobe.2019.101112},
issn = {2352-7102},
year = {2020},
date = {2020-01-01},
journal = {Journal of Building Engineering},
volume = {29},
pages = {101112},
abstract = {This article presents the numerical simulation of the energy effect of a solar mask created by a green wall on the thermal performance of a building envelope in a temperate climate in order to integrate it into thermal calculation codes. The document describes primarily the adaptation of a simplified prediction model. The simplified model was developed and validated on the basis of tests carried out with an experimental controlled occultation device by integrating all external parameters influencing heat exchanges (conduction, convection and radiation). A first validation of the numeric resolution algorithm of the preliminary model was realised. Then the model was supplemented by considerations related to the characteristics of the selected plants: ivy and Virginia creeper, such as the semi-transparent appearance of foliage plants and their geometric distribution. The numerical prediction was very close to the experimental values, and the mean error was about 1 °C. This difference makes it possible to validate the developed model.},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
This article presents the numerical simulation of the energy effect of a solar mask created by a green wall on the thermal performance of a building envelope in a temperate climate in order to integrate it into thermal calculation codes. The document describes primarily the adaptation of a simplified prediction model. The simplified model was developed and validated on the basis of tests carried out with an experimental controlled occultation device by integrating all external parameters influencing heat exchanges (conduction, convection and radiation). A first validation of the numeric resolution algorithm of the preliminary model was realised. Then the model was supplemented by considerations related to the characteristics of the selected plants: ivy and Virginia creeper, such as the semi-transparent appearance of foliage plants and their geometric distribution. The numerical prediction was very close to the experimental values, and the mean error was about 1 °C. This difference makes it possible to validate the developed model. |
2020Article de journal ER5 Auteurs : Abdellatif, Makram; Chamoin, Julien; NIANGA, Jean-Marie; Defer, Didier Prédiction par régression linéaire multiple : application au comportement thermique d’un bâtiment Academic Journal of Civil Engineering, vol. Vol 38 No 1, p. Special Issue-RUGC 2020 Marrakech, 2020, (ACTI). @article{ABDELLATIF2020,
title = {Prédiction par régression linéaire multiple : application au comportement thermique d’un bâtiment},
author = {Makram Abdellatif and Julien Chamoin and Jean-Marie NIANGA and Didier Defer},
doi = {10.26168/AJCE.38.1.19},
year = {2020},
date = {2020-01-01},
journal = {Academic Journal of Civil Engineering},
volume = {Vol 38 No 1},
pages = {Special Issue-RUGC 2020 Marrakech},
publisher = {Academic Journal of Civil Engineering},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2020Conférence ER5 Auteurs : Abdellatif, Makram; Chamoin, Julien; Defer, Didier; NIANGA, Jean Marie Prédiction par régression linéaire multiple : application au comportement thermique d'un bâtiment Rencontre Universitaire de Genie Civil, Marrakech, Morocco, 2020. @conference{Abdellatif2020b,
title = {Prédiction par régression linéaire multiple : application au comportement thermique d'un bâtiment},
author = {Makram Abdellatif and Julien Chamoin and Didier Defer and Jean Marie NIANGA},
url = {https://hal.archives-ouvertes.fr/hal-03211526},
year = {2020},
date = {2020-01-01},
urldate = {2020-01-01},
booktitle = {Rencontre Universitaire de Genie Civil},
address = {Marrakech, Morocco},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2019Article de journal ER5 Auteurs : Zalewski, Laurent; Franquet, Erwin; Gibout, Stéphane; Tittelein, Pierre; Defer, Didier Efficient Characterization of Macroscopic Composite Cement Mortars with Various Contents of Phase Change Material Applied Sciences, vol. 9, no. 6, p. 1104, 2019. @article{zalewski_efficient_2019,
title = {Efficient Characterization of Macroscopic Composite Cement Mortars with Various Contents of Phase Change Material},
author = {Laurent Zalewski and Erwin Franquet and Stéphane Gibout and Pierre Tittelein and Didier Defer},
url = {https://www.mdpi.com/2076-3417/9/6/1104},
doi = {10.3390/app9061104},
year = {2019},
date = {2019-01-01},
urldate = {2019-03-19},
journal = {Applied Sciences},
volume = {9},
number = {6},
pages = {1104},
abstract = {The determination of both the thermal and thermodynamical properties of a composite material containing phase change material is done thanks to an inverse method, which combines experimental measurements and numerical computations. Given first an in-house experiment, which allows us to test samples at a macroscopic scale (i.e., close to the real conditions) and to set various types of thermal stresses, and secondly the simulation of the corresponding thermal behavior, relying on an accurate thermodynamical modeling and taking into account the real operating parameters (e.g., thermal contact resistances and non-symmetric heat fluxes on each side), it is possible to characterize the solid and liquid thermal conductivities and heat capacities, as well as the temperature range associated with a non-isothermal phase transition and the associated latent heat. The specificity of the present approach is to allow, in a single step, a characterization of all the involved thermo-physical parameters that are usually required in simulation tools (e.g., EnergyPlus…). Moreover, the hitherto studies dealing with repeatability and uncertainties of the enthalpy characterization are generally very scant and not encountered very often or only with qualitative assessments. This is a clear caveat, especially when considering any system design. Therefore, for the first time ever, the present paper pays a special attention to the repeatability of the identification method and studies the scedasticity of the results, that is to say the deviations of the determined enthalpy curves, not only from a qualitative point of view but also by proposing quantitative arguments. Finally, the results are very promising since the agreement between all trials is excellent, the maximum error for all parameters being lower than 4%. This is far below the current quality thresholds admitted when characterizing the enthalpy of a phase change material.},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
The determination of both the thermal and thermodynamical properties of a composite material containing phase change material is done thanks to an inverse method, which combines experimental measurements and numerical computations. Given first an in-house experiment, which allows us to test samples at a macroscopic scale (i.e., close to the real conditions) and to set various types of thermal stresses, and secondly the simulation of the corresponding thermal behavior, relying on an accurate thermodynamical modeling and taking into account the real operating parameters (e.g., thermal contact resistances and non-symmetric heat fluxes on each side), it is possible to characterize the solid and liquid thermal conductivities and heat capacities, as well as the temperature range associated with a non-isothermal phase transition and the associated latent heat. The specificity of the present approach is to allow, in a single step, a characterization of all the involved thermo-physical parameters that are usually required in simulation tools (e.g., EnergyPlus…). Moreover, the hitherto studies dealing with repeatability and uncertainties of the enthalpy characterization are generally very scant and not encountered very often or only with qualitative assessments. This is a clear caveat, especially when considering any system design. Therefore, for the first time ever, the present paper pays a special attention to the repeatability of the identification method and studies the scedasticity of the results, that is to say the deviations of the determined enthalpy curves, not only from a qualitative point of view but also by proposing quantitative arguments. Finally, the results are very promising since the agreement between all trials is excellent, the maximum error for all parameters being lower than 4%. This is far below the current quality thresholds admitted when characterizing the enthalpy of a phase change material. |
2019Article de journal ER5 Auteurs : Keo, Sam-Ang; Yune, Chan-Young; Dragan, Razvan-Gabriel; Defer, Didier; Breaban, Florin Analysis of effects of diffraction and interference on detection by microwave thermography Journal of Civil Structural Health Monitoring, 2019, (ACL). @article{Keo2019,
title = {Analysis of effects of diffraction and interference on detection by microwave thermography},
author = {Sam-Ang Keo and Chan-Young Yune and Razvan-Gabriel Dragan and Didier Defer and Florin Breaban},
url = {https://link.springer.com/article/10.1007/s13349-019-00329-8#citeas},
doi = {10.1007/s13349-019-00329-8},
year = {2019},
date = {2019-03-01},
journal = {Journal of Civil Structural Health Monitoring},
publisher = {Springer Nature},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER5 Auteurs : Akil, Mostafa; Tittelein, Pierre; Defer, Didier; Suard, Frédéric Statistical indicator for the detection of anomalies in gas, electricity and water consumption: Application of smart monitoring for educational buildings Energy and Buildings, vol. 199, p. 512–522, 2019, ISSN: 0378-7788, (ACL). @article{akil_statistical_2019,
title = {Statistical indicator for the detection of anomalies in gas, electricity and water consumption: Application of smart monitoring for educational buildings},
author = {Mostafa Akil and Pierre Tittelein and Didier Defer and Frédéric Suard},
url = {http://www.sciencedirect.com/science/article/pii/S0378778818332511},
doi = {10.1016/j.enbuild.2019.07.025},
issn = {0378-7788},
year = {2019},
date = {2019-01-01},
urldate = {2019-09-02},
journal = {Energy and Buildings},
volume = {199},
pages = {512--522},
abstract = {Building facility managers are increasingly equipping their buildings with extensive sets of sensors. This article aims to develop an analysis decision-making methodology based on the production of statistical indicators. The tracking of such indicators allows detecting any systems performance problems. The automatic pinpointing of malfunctions can serve to activate alerts. Our approach focuses on the processing of data stemming from secondary schools managed by departmental services in the Pas-de-Calais, where 117 secondary school buildings have been instrumented with various sensors and supplying data since 2015. This article starts with a close-up on data mining for water, gas and electricity consumption. Data mining and machine learning methods, including the Clustering approach (K-Means), have been used to extract information from the measurements conducted in 2015 and 2016. This information is used to classify the 2017 measurements according to supervised approaches (SVM). The specificity of this work is to delve deeper into the analysis by combining into the same algorithm a set of various sensors related to both energy use and building occupancy. The data classification results have allowed highlighting "atypical" operations during the daytime, through interpreting data classification results in an effort to define the status of every day in year 2017.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
Building facility managers are increasingly equipping their buildings with extensive sets of sensors. This article aims to develop an analysis decision-making methodology based on the production of statistical indicators. The tracking of such indicators allows detecting any systems performance problems. The automatic pinpointing of malfunctions can serve to activate alerts. Our approach focuses on the processing of data stemming from secondary schools managed by departmental services in the Pas-de-Calais, where 117 secondary school buildings have been instrumented with various sensors and supplying data since 2015. This article starts with a close-up on data mining for water, gas and electricity consumption. Data mining and machine learning methods, including the Clustering approach (K-Means), have been used to extract information from the measurements conducted in 2015 and 2016. This information is used to classify the 2017 measurements according to supervised approaches (SVM). The specificity of this work is to delve deeper into the analysis by combining into the same algorithm a set of various sensors related to both energy use and building occupancy. The data classification results have allowed highlighting "atypical" operations during the daytime, through interpreting data classification results in an effort to define the status of every day in year 2017. |
2019Article de journal ER5 Auteurs : Alhaj-Hasan, Ola; Defer, Didier The role of new technologies in understanding the building energy performance: a comparative study International Journal of Smart Grid and Clean Energy, vol. 8, no. 4, p. 397-401, 2019, (cited By 0). @article{Hasan2019397,
title = {The role of new technologies in understanding the building energy performance: a comparative study},
author = {Ola Alhaj-Hasan and Didier Defer},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85077296427&doi=10.12720%2fsgce.8.4.397-401&partnerID=40&md5=b35c13498bccbb3621b748e75355c1b2},
doi = {10.12720/sgce.8.4.397-401},
year = {2019},
date = {2019-01-01},
journal = {International Journal of Smart Grid and Clean Energy},
volume = {8},
number = {4},
pages = {397-401},
note = {cited By 0},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2019Article de journal ER5 Auteurs : Asli, Mounir; Brachelet, Franck; Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier Numerical and experimental investigation of heat and mass transfer within bio-based material Thermal science, 2019, (ACL). @article{,
title = {Numerical and experimental investigation of heat and mass transfer within bio-based material},
author = {Mounir Asli and Franck Brachelet and Alexis Chauchois and Emmanuel Antczak and Didier Defer},
doi = {10.2298/TSCI161019175A},
year = {2019},
date = {2019-01-01},
urldate = {2018-01-01},
journal = {Thermal science},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2019Proceedings Article ER5 Auteurs : Abdellatif, Makram; Chamoin, Julien; Defer, Didier A thermal control methodology based on a predictive model for indoor heating management p. 01001, 2019. @inproceedings{refId0c,
title = {A thermal control methodology based on a predictive model for indoor heating management},
author = {Makram Abdellatif and Julien Chamoin and Didier Defer},
url = {https://doi.org/10.1051/matecconf/201929501001},
doi = {10.1051/matecconf/201929501001},
year = {2019},
date = {2019-01-01},
urldate = {2019-01-01},
journal = {MATEC Web Conf.},
volume = {295},
pages = {01001},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2018Proceedings Article ER5 Auteurs : Akil, Mostafa; Defer, Didier; Tittelein, Pierre; Suard, Frédéric Méthode statistique de classification automatique des mesures de consommations de bâtiments d’enseignement en eau, gaz et électricité pour la mise en évidence d’anomalies de fonctionnement Conférence IBPSA France, Bordeaux, 2018, (ACTN). @inproceedings{mostafa_akil_methode_2018,
title = {Méthode statistique de classification automatique des mesures de consommations de bâtiments d’enseignement en eau, gaz et électricité pour la mise en évidence d’anomalies de fonctionnement},
author = {Mostafa Akil and Didier Defer and Pierre Tittelein and Frédéric Suard},
url = {http://ibpsa.fr/index.php?option=com_jdownloads&Itemid=53&view=viewcategory&catid=81},
year = {2018},
date = {2018-01-01},
booktitle = {Conférence IBPSA France},
address = {Bordeaux},
abstract = {Les gestionnaires de parc équipent de plus en plus leurs bâtiments avec de nombreux capteurs.
L’analyse des données issues de ces mesures reste pourtant compliquée et se limite souvent à la définition de
seuils d’alerte. Cet article vise à développer une méthodologie d’analyse basée sur l’élaboration d’indicateurs
statistiques. Leur suivi pourra permettre de détecter des évolutions de comportement ou de performance des
systèmes. La mise en évidence automatisée d’anomalies de fonctionnement pourra déclencher des alertes. Notre
première approche se concentre sur le traitement de données issues de collèges gérés par le département de Pas
de Calais. 117 bâtiments de collège sont instrumentés avec différents capteurs (eau, électricité, gaz, température
intérieure et extérieure, …) et fournissent des données depuis 2015. Plusieurs cycles de saisons sont exploitables.
Des méthodes de Data Mining, y compris l'approche de Clustering, ont été utilisées pour extraire des informations
à partir des mesures en 2015 et 2016. Les résultats de la classification des données ont permis de mettre en
évidence des jours de fonctionnement rares en exploitant les résultats de la classification des données.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
Les gestionnaires de parc équipent de plus en plus leurs bâtiments avec de nombreux capteurs.
L’analyse des données issues de ces mesures reste pourtant compliquée et se limite souvent à la définition de
seuils d’alerte. Cet article vise à développer une méthodologie d’analyse basée sur l’élaboration d’indicateurs
statistiques. Leur suivi pourra permettre de détecter des évolutions de comportement ou de performance des
systèmes. La mise en évidence automatisée d’anomalies de fonctionnement pourra déclencher des alertes. Notre
première approche se concentre sur le traitement de données issues de collèges gérés par le département de Pas
de Calais. 117 bâtiments de collège sont instrumentés avec différents capteurs (eau, électricité, gaz, température
intérieure et extérieure, …) et fournissent des données depuis 2015. Plusieurs cycles de saisons sont exploitables.
Des méthodes de Data Mining, y compris l'approche de Clustering, ont été utilisées pour extraire des informations
à partir des mesures en 2015 et 2016. Les résultats de la classification des données ont permis de mettre en
évidence des jours de fonctionnement rares en exploitant les résultats de la classification des données. |
2018Conférence ER5 Auteurs : Antczak, Emmanuel; Asli, Mounir; Brachelet, Franck; Brue, Flore; Defer, Didier Etude du comportement hygrothermique d’anas de lin utilisés comme isolant en vrac de combles perdus Conférence IBPSA France 2018, Bordeaux 2018, (ACTN). @conference{,
title = {Etude du comportement hygrothermique d’anas de lin utilisés comme isolant en vrac de combles perdus},
author = {Emmanuel Antczak and Mounir Asli and Franck Brachelet and Flore Brue and Didier Defer},
year = {2018},
date = {2018-01-01},
booktitle = {Conférence IBPSA France 2018},
organization = {Bordeaux},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Article de journal ER5 Auteurs : Kenaï, Mohamed-Amine; Libessart, Laurent; Lassue, Stéphane; Defer, Didier Impact of plants occultation on energy balance: Experimental study Energy and Buildings, vol. 162, p. 208 - 218, 2018, ISSN: 0378-7788. @article{KENAI2018208,
title = {Impact of plants occultation on energy balance: Experimental study},
author = {Mohamed-Amine Kenaï and Laurent Libessart and Stéphane Lassue and Didier Defer},
url = {http://www.sciencedirect.com/science/article/pii/S0378778817325495},
doi = {https://doi.org/10.1016/j.enbuild.2017.12.024},
issn = {0378-7788},
year = {2018},
date = {2018-01-01},
journal = {Energy and Buildings},
volume = {162},
pages = {208 - 218},
abstract = {This paper presents the results of the validation of an experimental method for studying the thermal benefits of green façades. The main aim is to evaluate the impact of plants occultation on energy performance of a vertical wall in the temperate climate of the city of Lille in northern France. An experimental platform consisting of three identical prototypes (three boxes as thermal labs) has been designed and instrumented. Each prototype has been highly insulated from each face except from the vertical southern wall which was realized with a poor thermal conductivity material. The following measurements were taken: ambient temperature (outside and inside thermal labs), external and internal surface temperatures of southern walls, heat fluxes transferred through south verticals walls (reference and vegetalized walls), solar incident radiation and wind velocity variation under instantaneous real climatic conditions. This enabled the analysis of the variation of energy balance according to the presence or not of a shading effect on the south vertical walls as well as their coverage rate. Several tests were performed on the three experimental thermal labs by imposing a leaf coverage rate which differs during each measurement. The results have shown that masking reduces the outside temperature and enhances the interior thermal comfort especially during summer.},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
This paper presents the results of the validation of an experimental method for studying the thermal benefits of green façades. The main aim is to evaluate the impact of plants occultation on energy performance of a vertical wall in the temperate climate of the city of Lille in northern France. An experimental platform consisting of three identical prototypes (three boxes as thermal labs) has been designed and instrumented. Each prototype has been highly insulated from each face except from the vertical southern wall which was realized with a poor thermal conductivity material. The following measurements were taken: ambient temperature (outside and inside thermal labs), external and internal surface temperatures of southern walls, heat fluxes transferred through south verticals walls (reference and vegetalized walls), solar incident radiation and wind velocity variation under instantaneous real climatic conditions. This enabled the analysis of the variation of energy balance according to the presence or not of a shading effect on the south vertical walls as well as their coverage rate. Several tests were performed on the three experimental thermal labs by imposing a leaf coverage rate which differs during each measurement. The results have shown that masking reduces the outside temperature and enhances the interior thermal comfort especially during summer. |
2017Conférence ER5 Auteurs : Vogt-Wu, Tingting; Antczak, Emmanuel; Brachelet, Franck; Defer, Didier A simple inverse method for monitoring the thermal characteristics of the limestone in an individual house International COnference on Materials ans Energy (ICOME 2017), Tianjin China 2017, (ACTI). @conference{Wu2017,
title = {A simple inverse method for monitoring the thermal characteristics of the limestone in an individual house},
author = {Tingting Vogt-Wu and Emmanuel Antczak and Franck Brachelet and Didier Defer},
year = {2017},
date = {2017-01-01},
booktitle = {International COnference on Materials ans Energy (ICOME 2017)},
organization = {Tianjin China},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Article de journal ER5 Auteurs : Derbal, Radhouan; Defer, Didier; Antczak, Emmanuel; Brachelet, Franck Moisture content estimation based on thermal analysis method applied to sand JP Journal of Heat and Mass Transfer, vol. 14 issue 2, p. 247-275, 2017, (ACL). @article{Derbal2017,
title = {Moisture content estimation based on thermal analysis method applied to sand},
author = {Radhouan Derbal and Didier Defer and Emmanuel Antczak and Franck Brachelet},
year = {2017},
date = {2017-01-01},
journal = {JP Journal of Heat and Mass Transfer},
volume = {14 issue 2},
pages = {247-275},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2017Conférence ER5 Auteurs : Antczak, Emmanuel; Asli, Mounir; Brachelet, Franck; Brue, Flore; Defer, Didier; Lucas, Alain Monitoring and thermal characterization of flax shives for building thermal insulation 2nd International Conference on Bio-based Building Materials 2017, Clermont - Ferrand 2017, (ACTI). @conference{Antczak2017,
title = {Monitoring and thermal characterization of flax shives for building thermal insulation},
author = {Emmanuel Antczak and Mounir Asli and Franck Brachelet and Flore Brue and Didier Defer and Alain Lucas},
year = {2017},
date = {2017-01-01},
booktitle = {2nd International Conference on Bio-based Building Materials 2017},
organization = {Clermont - Ferrand},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Brachelet, Franck; Asli, Mounir; Antczak, Emmanuel; Brue, Flore; Defer, Didier; Lucas, Alain Hygrothermal behavior of flax shives used as insulation material in an attic of a traditional house International COnference on Materials ans Energy (ICOME 2017), Tianjin China 2017, (ACTI). @conference{Brachelet2017,
title = {Hygrothermal behavior of flax shives used as insulation material in an attic of a traditional house},
author = {Franck Brachelet and Mounir Asli and Emmanuel Antczak and Flore Brue and Didier Defer and Alain Lucas},
year = {2017},
date = {2017-01-01},
booktitle = {International COnference on Materials ans Energy (ICOME 2017)},
organization = {Tianjin China},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Article de journal ER5 Auteurs : Kenai, Mohamed-Amine; Libessart, Laurent; Lassue, Stéphane; Defer, Didier Impact of plants occultation on energy balance: Experimental study Energy and Buildings, 2017, (ACL). @article{mohamed2017impact,
title = {Impact of plants occultation on energy balance: Experimental study},
author = {Mohamed-Amine Kenai and Laurent Libessart and Stéphane Lassue and Didier Defer},
year = {2017},
date = {2017-01-01},
journal = {Energy and Buildings},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2017Proceedings Article ER5 Auteurs : Abouaissa, Hassane; Alhaj-Hasan, Ola; Join, Cedric; Fliess, Michel; Defer, Didier Energy saving for building heating via a simple and efficient model-free control design: First steps with computer simulations 2017 21st International Conference on System Theory, Control and Computing (ICSTCC), IEEE, 2017, (ACTI). @inproceedings{Abouaissa2017,
title = {Energy saving for building heating via a simple and efficient model-free control design: First steps with computer simulations},
author = {Hassane Abouaissa and Ola Alhaj-Hasan and Cedric Join and Michel Fliess and Didier Defer},
doi = {10.1109/icstcc.2017.8107126},
year = {2017},
date = {2017-10-01},
booktitle = {2017 21st International Conference on System Theory, Control and Computing (ICSTCC)},
publisher = {IEEE},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2017Conférence ER5 Auteurs : Asli, Mounir; Antczak, Emmanuel; Brachelet, Franck; Defer, Didier; Chauchois, Alexis Hygrothermal behaviour of a hemp concrete block, experimental and numerical results 2nd International Conference on Bio-based Building Materials, Clermont-Ferrand 2017 2017, (ACTI). @conference{Asli2017b,
title = {Hygrothermal behaviour of a hemp concrete block, experimental and numerical results},
author = {Mounir Asli and Emmanuel Antczak and Franck Brachelet and Didier Defer and Alexis Chauchois},
year = {2017},
date = {2017-01-01},
booktitle = {2nd International Conference on Bio-based Building Materials},
organization = {Clermont-Ferrand 2017},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Antczak, Emmanuel; Asli, Mounir; Brachelet, Franck; Brue, Flore; Defer, Didier Etude du comportement hygrothermique d’anas de lin utilisés comme isolant en vrac de combles perdus Conférence Francophone de l'International Building Performance Simulation Association, vol. 99, 2017, ISSN: 0008-8846, (AFF). @conference{ANTC2018I,
title = {Etude du comportement hygrothermique d’anas de lin utilisés comme isolant en vrac de combles perdus},
author = {Emmanuel Antczak and Mounir Asli and Franck Brachelet and Flore Brue and Didier Defer},
url = {http://www.sciencedirect.com/science/article/pii/S0008884617304428},
doi = {https://doi.org/10.1016/j.cemconres.2017.04.017},
issn = {0008-8846},
year = {2017},
date = {2017-01-01},
booktitle = {Conférence Francophone de l'International Building Performance Simulation Association},
journal = {Cement and Concrete Research},
volume = {99},
pages = {70 - 85},
abstract = {This experimental study imposes limited relative humidity (RH) gradients to small mature concrete samples, at a constant temperature T = 20, 50 or 80°C. Mass loss and shrinkage are recorded until stabilization at each RH and T, for up to 1991days. Firstly, our mass loss data are consistent with those presented in former research (on different samples of the same batch). After presenting and analyzing shrinkage kinetics, experimental data are fitted with usual models for shrinkage prediction, at each temperature of 20, 50 and 80°C. An adequate match is obtained by combining capillarity (i.e. Vlahinic's model coupling poro-elastic constants and water saturation level) and desorption (Bangham's equation). Subsequently, relative mass variation (RMV) is plotted against shrinkage εshdry data. Three distinct phases are obtained at 20 or 50°C and down to 30%RH; up to four distinct phases are observed at T = 80°C and down to 12%RH. The latter are confirmed by experiments on (60°C; 7%RH) dried concrete. The four phases in the (RMV,εshdry) diagram are interpreted against shrinkage data on mature cement paste dried at 60°C; 7%RH and against the literature.},
note = {AFF},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
This experimental study imposes limited relative humidity (RH) gradients to small mature concrete samples, at a constant temperature T = 20, 50 or 80°C. Mass loss and shrinkage are recorded until stabilization at each RH and T, for up to 1991days. Firstly, our mass loss data are consistent with those presented in former research (on different samples of the same batch). After presenting and analyzing shrinkage kinetics, experimental data are fitted with usual models for shrinkage prediction, at each temperature of 20, 50 and 80°C. An adequate match is obtained by combining capillarity (i.e. Vlahinic's model coupling poro-elastic constants and water saturation level) and desorption (Bangham's equation). Subsequently, relative mass variation (RMV) is plotted against shrinkage εshdry data. Three distinct phases are obtained at 20 or 50°C and down to 30%RH; up to four distinct phases are observed at T = 80°C and down to 12%RH. The latter are confirmed by experiments on (60°C; 7%RH) dried concrete. The four phases in the (RMV,εshdry) diagram are interpreted against shrinkage data on mature cement paste dried at 60°C; 7%RH and against the literature. |
2016Article de journal ER5 Auteurs : Derbal, Radhouan; Defer, Didier Thermophysical and hydric properties estimation based on a double inverse analysis Heat and Mass Transfer, p. 1–15, 2016, ISSN: 1432-1181, (ACL). @article{Derbal2016,
title = {Thermophysical and hydric properties estimation based on a double inverse analysis},
author = {Radhouan Derbal and Didier Defer},
url = {http://dx.doi.org/10.1007/s00231-016-1907-1},
doi = {10.1007/s00231-016-1907-1},
issn = {1432-1181},
year = {2016},
date = {2016-01-01},
journal = {Heat and Mass Transfer},
pages = {1--15},
abstract = {This article presents a dual method for the determination of thermophysical
and hydric properties of porous materials. First empirical relationships
between thermophysical properties and moisture content were determined.
Then, a laboratory setup allowed for temperature recording during
a drying test. Empirical relationships and recorded data are the
algorithm inputs. The two stages algorithm is based on a finite difference
discretization and a parametric estimation. Autoclaved Aerated Concrete
was tested in this case study and positive estimation results with
8Â % accuracy are encouraging outcome for next use of the method.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
This article presents a dual method for the determination of thermophysical
and hydric properties of porous materials. First empirical relationships
between thermophysical properties and moisture content were determined.
Then, a laboratory setup allowed for temperature recording during
a drying test. Empirical relationships and recorded data are the
algorithm inputs. The two stages algorithm is based on a finite difference
discretization and a parametric estimation. Autoclaved Aerated Concrete
was tested in this case study and positive estimation results with
8Â % accuracy are encouraging outcome for next use of the method. |
2016Proceedings Article ER5 Auteurs : Zalewski, Laurent; Tittelein, Pierre; Defer, Didier; Lassue, Stéphane Characterization of phase change material with fluxmetric experimental device Oral presentation, Krakow, Poland, 2016, (COM). @inproceedings{zalewski_characterization_2016,
title = {Characterization of phase change material with fluxmetric experimental device},
author = {Laurent Zalewski and Pierre Tittelein and Didier Defer and Stéphane Lassue},
year = {2016},
date = {2016-06-01},
booktitle = {Oral presentation},
address = {Krakow, Poland},
note = {COM},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2016Article de journal ER5 Auteurs : Alhaj-Hasan, Ola; Abouaissa, Hassane; Shahrour, Isam; Defer, Didier Building energy consumption flatness-based control using algebraic on-line estimation Energy Efficiency, p. 1–15, 2016, ISSN: 1570-6478, (ACL). @article{Ola2016,
title = {Building energy consumption flatness-based control using algebraic on-line estimation},
author = {Ola Alhaj-Hasan and Hassane Abouaissa and Isam Shahrour and Didier Defer},
url = {http://dx.doi.org/10.1007/s12053-016-9479-y},
doi = {10.1007/s12053-016-9479-y},
issn = {1570-6478},
year = {2016},
date = {2016-01-01},
journal = {Energy Efficiency},
pages = {1--15},
abstract = {A new model-based on-line control of building energy consumption with no drawbacks related to the thermal model or the unplanned changes (occupation, exterior temperature, łdots) is presented in this paper. The main theoretical tools of this method are the flatness-based control and the recent new setting of numerical differentiation for fast and on-line parameter estimation. Indeed the estimation techniques form an added value in terms of the reliability of the thermal model. Furthermore, the main advantage of using the differential flatness control scheme is that the system behavior can be described by the trajectory of a so-called flat output and a number of its successive time derivatives. This leads to a simple design of the control strategy without the integration of any differential equations. Numerical simulations as well as comparative studies with a classical PID (proportional-integral-derivative) controller are provided to demonstrate the relevance of the proposed approach.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
A new model-based on-line control of building energy consumption with no drawbacks related to the thermal model or the unplanned changes (occupation, exterior temperature, łdots) is presented in this paper. The main theoretical tools of this method are the flatness-based control and the recent new setting of numerical differentiation for fast and on-line parameter estimation. Indeed the estimation techniques form an added value in terms of the reliability of the thermal model. Furthermore, the main advantage of using the differential flatness control scheme is that the system behavior can be described by the trajectory of a so-called flat output and a number of its successive time derivatives. This leads to a simple design of the control strategy without the integration of any differential equations. Numerical simulations as well as comparative studies with a classical PID (proportional-integral-derivative) controller are provided to demonstrate the relevance of the proposed approach. |
2016Conférence ER5 Auteurs : Derbal, Radhouan; Lucas, Alain; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel Réhafutur : In situ instrumentation for a comprehensive building analysis International Conference on Materials and Energy 2016, La Rochelle France 2016, (ACTI). @conference{Derbal2016a,
title = {Réhafutur : In situ instrumentation for a comprehensive building analysis},
author = {Radhouan Derbal and Alain Lucas and Franck Brachelet and Didier Defer and Emmanuel Antczak},
year = {2016},
date = {2016-01-01},
booktitle = {International Conference on Materials and Energy 2016},
organization = {La Rochelle France},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Article de journal ER5 Auteurs : Chauchois, Alexis; Defer, Didier; Choi, H; Antczak, Emmanuel; Brachelet, Franck; Asli, Mounir Development of a Cylindrical Probe Designed for Thermal Characterization of Granular Materials Transport in Porous Media, vol. 112, no. 3, p. 549–561, 2016, ISSN: 1573-1634, (ACL). @article{chau2016ab,
title = {Development of a Cylindrical Probe Designed for Thermal Characterization of Granular Materials},
author = {Alexis Chauchois and Didier Defer and H Choi and Emmanuel Antczak and Franck Brachelet and Mounir Asli},
url = {http://dx.doi.org/10.1007/s11242-016-0656-4},
doi = {10.1007/s11242-016-0656-4},
issn = {1573-1634},
year = {2016},
date = {2016-01-01},
journal = {Transport in Porous Media},
volume = {112},
number = {3},
pages = {549--561},
abstract = {This article describes a new thermophysical characterization method
for granular materials. It is based on the creation of a cylindrical
probe, fitted with peripheral flux and temperature sensors. These
sensors record changes in thermal variables in the case of cylindrically
symmetrical heat diffusion. A numerical exchange model integrated
into an inversion algorithm identifies the thermal effusivity and
diffusivity of the material being tested and the sensor/material
contact resistance. In this first study, the method was applied to
dry sand.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
This article describes a new thermophysical characterization method
for granular materials. It is based on the creation of a cylindrical
probe, fitted with peripheral flux and temperature sensors. These
sensors record changes in thermal variables in the case of cylindrically
symmetrical heat diffusion. A numerical exchange model integrated
into an inversion algorithm identifies the thermal effusivity and
diffusivity of the material being tested and the sensor/material
contact resistance. In this first study, the method was applied to
dry sand. |
2016Conférence ER5 Auteurs : Asli, Mounir; Brachelet, Franck; Derbal, Radhouan; Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier Numerical and experimental investigation of simultaneous heat and mass transfer within bio-based material ECOS 2016, Portorož Slovenia 2016, (ACTI). @conference{Asli2016b,
title = {Numerical and experimental investigation of simultaneous heat and mass transfer within bio-based material},
author = {Mounir Asli and Franck Brachelet and Radhouan Derbal and Alexis Chauchois and Emmanuel Antczak and Didier Defer},
year = {2016},
date = {2016-01-01},
booktitle = {ECOS 2016},
organization = {Portorož Slovenia},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : Bédécarrats, Jean-Pierre; David, Damien; Defer, Didier; Dumas, Jean-Pierre; Franquet, Erwin; Gibout, Stéphane; Haillot, Didier; Johannes, Kévyn; Joulin, Annabelle; Kuznik, Frédéric; Lassue, Stéphane; Maréchal, William; Naji, Hassane; Tittelein, Pierre; Zalewski, Laurent Caractérisation des matériaux à changement de phase pour la simulation thermique des bâtiments actes du Congrès Français de Thermique 2015, La Rochelle, 2015, (ACTN). @conference{bede2015a,
title = {Caractérisation des matériaux à changement de phase pour la simulation thermique des bâtiments},
author = {Jean-Pierre Bédécarrats and Damien David and Didier Defer and Jean-Pierre Dumas and Erwin Franquet and Stéphane Gibout and Didier Haillot and Kévyn Johannes and Annabelle Joulin and Frédéric Kuznik and Stéphane Lassue and William Maréchal and Hassane Naji and Pierre Tittelein and Laurent Zalewski},
year = {2015},
date = {2015-05-01},
booktitle = {actes du Congrès Français de Thermique 2015},
address = {La Rochelle},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : Bédécarrats, Jean-Pierre; David, Damien; Defer, Didier; Dumas, Jean-Pierre; Franquet, Erwin; Gibout, Stéphane; Haillot, Didier; Johannes, Kevyn; Joulin, Annabelle; Kuznik, Frédéric; Lassue, Stéphane; Maréchal, William; Naji, Hassane; Tittelein, Pierre; Zalewski, Laurent Phase change materials characterisation and applications to the thermal simulation of buildings Proceedings of ECOS 2015, Pau, 2015, (ACTI). @conference{bede2015b,
title = {Phase change materials characterisation and applications to the thermal simulation of buildings},
author = {Jean-Pierre Bédécarrats and Damien David and Didier Defer and Jean-Pierre Dumas and Erwin Franquet and Stéphane Gibout and Didier Haillot and Kevyn Johannes and Annabelle Joulin and Frédéric Kuznik and Stéphane Lassue and William Maréchal and Hassane Naji and Pierre Tittelein and Laurent Zalewski},
year = {2015},
date = {2015-07-01},
booktitle = {Proceedings of ECOS 2015},
address = {Pau},
abstract = {We aim here at presenting the main results of the Stock-E MICMCP ANR
project whose principal goal is the correct thermophysical characterisation
of phase change materials in order to have reliable inputs when considering
numerical simulations of thermal behaviour of buildings. Firstly,
we will present the method developed to determine the function governing
the enthalpy with respect to the temperature of the material. It
is based on the use of experimental measurements together with an
inversion method: by comparing the heat flow with a simulated one,
obtained by assuming an a priori formulation of the enthalpy (which
set some basic thermodynamical constraints), we may calculate the
numerical values of the associated parameters. Secondly, we will
show that this method can be extended to macroscopic and heterogeneous
materials, which are more representative of real samples. Eventually,
we will show on some examples of thermal buildings simulations the
necessity to correctly represent the PCM behaviour if one wants to
use them in the future so as to save energy and for a better comfort.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
We aim here at presenting the main results of the Stock-E MICMCP ANR
project whose principal goal is the correct thermophysical characterisation
of phase change materials in order to have reliable inputs when considering
numerical simulations of thermal behaviour of buildings. Firstly,
we will present the method developed to determine the function governing
the enthalpy with respect to the temperature of the material. It
is based on the use of experimental measurements together with an
inversion method: by comparing the heat flow with a simulated one,
obtained by assuming an a priori formulation of the enthalpy (which
set some basic thermodynamical constraints), we may calculate the
numerical values of the associated parameters. Secondly, we will
show that this method can be extended to macroscopic and heterogeneous
materials, which are more representative of real samples. Eventually,
we will show on some examples of thermal buildings simulations the
necessity to correctly represent the PCM behaviour if one wants to
use them in the future so as to save energy and for a better comfort. |
2015Conférence ER5 Auteurs : Kenai, Mohammed-Amine; Libessart, Laurent; Lassue, Stéphane; Defer, Didier Performance énergétique des parois végétalisées XIIeme Colloque Interuniversitaire Franco-Québécois Sur la Thermique des Systèmes (CIFQ 2015), 2015, (ACTI). @conference{Kena2015A,
title = {Performance énergétique des parois végétalisées},
author = {Mohammed-Amine Kenai and Laurent Libessart and Stéphane Lassue and Didier Defer},
year = {2015},
date = {2015-01-01},
booktitle = {XIIeme Colloque Interuniversitaire Franco-Québécois Sur la Thermique des Systèmes (CIFQ 2015)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Article de journal ER5 Auteurs : Keo, Sam Ang; Brachelet, Franck; Breaban, Florin; Defer, Didier Defect detection in CFRP by infrared thermography with CO 2 Laser excitation compared to conventional lock-in infrared thermography Composites Part B: Engineering, vol. 69, p. 1–5, 2015, (ACL). @article{Keo2015,
title = {Defect detection in CFRP by infrared thermography with CO 2 Laser excitation compared to conventional lock-in infrared thermography},
author = {Sam Ang Keo and Franck Brachelet and Florin Breaban and Didier Defer},
year = {2015},
date = {2015-01-01},
journal = {Composites Part B: Engineering},
volume = {69},
pages = {1--5},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER5 Auteurs : Tittelein, Pierre; Gibout, Stéphane; Franquet, Erwin; Zalewski, Laurent; Defer, Didier Identification of Thermal Properties and Thermodynamic Model for a Cement Mortar Containing PCM by Using Inverse Method Energy Procedia, vol. 78, p. 1696–1701, 2015, ISSN: 1876-6102, (ACL). @article{titt2005b,
title = {Identification of Thermal Properties and Thermodynamic Model for a Cement Mortar Containing PCM by Using Inverse Method},
author = {Pierre Tittelein and Stéphane Gibout and Erwin Franquet and Laurent Zalewski and Didier Defer},
url = {http://www.sciencedirect.com/science/article/pii/S1876610215019979},
doi = {10.1016/j.egypro.2015.11.265},
issn = {1876-6102},
year = {2015},
date = {2015-01-01},
urldate = {2016-01-13},
journal = {Energy Procedia},
volume = {78},
pages = {1696--1701},
series = {6th International Building Physics Conference, IBPC 2015},
abstract = {The support of this study is a cement mortar containing a micro-encapsulated phase change material (PCM). The aim of this article is to identify by an inverse method the thermophysical properties of this composite material and all the parameters that are needed to build a physical model able to simulate the thermal behavior of a material containing PCM with accuracy. This approach consist in estimating different parameters that take place in the analytical relation of the enthalpy as a function of the temperature (h(T)) by comparing the response of the model with experimental results (here, heat flux measurement). A simplex algorithm allowed to minimize the quadratic criterion associated. The results obtained by inverse method are then analyzed and compared by experimental results obtained by direct method.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
The support of this study is a cement mortar containing a micro-encapsulated phase change material (PCM). The aim of this article is to identify by an inverse method the thermophysical properties of this composite material and all the parameters that are needed to build a physical model able to simulate the thermal behavior of a material containing PCM with accuracy. This approach consist in estimating different parameters that take place in the analytical relation of the enthalpy as a function of the temperature (h(T)) by comparing the response of the model with experimental results (here, heat flux measurement). A simplex algorithm allowed to minimize the quadratic criterion associated. The results obtained by inverse method are then analyzed and compared by experimental results obtained by direct method. |
2015Proceedings Article ER5 Auteurs : Tittelein, Pierre; Gibout, Stéphane; Franquet, Erwin; Zalewski, Laurent; Defer, Didier Identification of Thermal Properties and Thermodynamic Model for a Cement Mortar Containing PCM by Using Inverse Method Proceedings of IBPC 2015, Torino (Italy), 2015, (ACTI). @inproceedings{titt2016a,
title = {Identification of Thermal Properties and Thermodynamic Model for a Cement Mortar Containing PCM by Using Inverse Method},
author = {Pierre Tittelein and Stéphane Gibout and Erwin Franquet and Laurent Zalewski and Didier Defer},
year = {2015},
date = {2015-01-01},
booktitle = {Proceedings of IBPC 2015},
address = {Torino (Italy)},
abstract = {The support of this study is a cement mortar containing a micro-encapsulated phase change material (PCM). The aim of this article is to identify by an inverse method the thermophysical properties of this composite material and all the parameters that are needed to build a physical model able to simulate the thermal behavior of a material containing PCM with accuracy. This approach consist in estimating different parameters that take place in the analytical relation of the enthalpy as a function of the temperature (h(T)) by comparing the response of the model with experimental results (here, heat flux measurement). A simplex algorithm allowed to minimize the quadratic criterion associated. The results obtained by inverse method are then analyzed and compared by experimental results obtained by direct method.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
The support of this study is a cement mortar containing a micro-encapsulated phase change material (PCM). The aim of this article is to identify by an inverse method the thermophysical properties of this composite material and all the parameters that are needed to build a physical model able to simulate the thermal behavior of a material containing PCM with accuracy. This approach consist in estimating different parameters that take place in the analytical relation of the enthalpy as a function of the temperature (h(T)) by comparing the response of the model with experimental results (here, heat flux measurement). A simplex algorithm allowed to minimize the quadratic criterion associated. The results obtained by inverse method are then analyzed and compared by experimental results obtained by direct method. |
2015Proceedings Article ER5 Auteurs : Tittelein, Pierre; Gibout, Stéphane; Franquet, Erwin; Zalewski, Laurent; Defer, Didier Identification des propriétés thermophysiques et du modèle thermodynamique par méthode inverse d'un mortier ciment contenant un mcp encapsulé Actes du CIFQ 2015, Sherbrook, 2015, (ACTI). @inproceedings{tittelein_identification_2015,
title = {Identification des propriétés thermophysiques et du modèle thermodynamique par méthode inverse d'un mortier ciment contenant un mcp encapsulé},
author = {Pierre Tittelein and Stéphane Gibout and Erwin Franquet and Laurent Zalewski and Didier Defer},
year = {2015},
date = {2015-01-01},
booktitle = {Actes du CIFQ 2015},
address = {Sherbrook},
abstract = {Le support de l'étude est un mortier ciment contenant un matériau à changement de phase (MCP) micro-encapsulé. L'objet consiste à identifier par méthode inverse les propriétés thermophysiques de ce matériau composite et les paramètres nécessaires à la construction d'un modèle capable de simuler de façon fiable le comportement thermique d'un matériau contenant un MCP. Cette approche consiste à estimer les différents paramètres intervenant dans la relation analytique de l'enthalpie en fonction de la température (h(T)) en comparant la réponse du modèle à des mesures expérimentales, ici en l'occurrence des mesures de flux. Un algorithme de type simplexe permet alors de minimiser le critère quadratique correspondant. Les résultats obtenus par méthode inverse sont analysés et comparés à des résultats expérimenatux obtenus par une méthode directe.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
Le support de l'étude est un mortier ciment contenant un matériau à changement de phase (MCP) micro-encapsulé. L'objet consiste à identifier par méthode inverse les propriétés thermophysiques de ce matériau composite et les paramètres nécessaires à la construction d'un modèle capable de simuler de façon fiable le comportement thermique d'un matériau contenant un MCP. Cette approche consiste à estimer les différents paramètres intervenant dans la relation analytique de l'enthalpie en fonction de la température (h(T)) en comparant la réponse du modèle à des mesures expérimentales, ici en l'occurrence des mesures de flux. Un algorithme de type simplexe permet alors de minimiser le critère quadratique correspondant. Les résultats obtenus par méthode inverse sont analysés et comparés à des résultats expérimenatux obtenus par une méthode directe. |
2015Proceedings Article ER5 Auteurs : Alhaj-Hasan, Ola; Defer, Didier; Shahrour, Isam Optimization of District Heating Consumption Using Random Heating Scenario Generator Mechanics and Control Engineering III, p. 479–482, Trans Tech Publications, 2015, (ACTI). @inproceedings{alhajhasan2015,
title = {Optimization of District Heating Consumption Using Random Heating Scenario Generator},
author = {Ola Alhaj-Hasan and Didier Defer and Isam Shahrour},
doi = {10.4028/www.scientific.net/AMM.704.479},
year = {2015},
date = {2015-01-01},
booktitle = {Mechanics and Control Engineering III},
volume = {704},
pages = {479--482},
publisher = {Trans Tech Publications},
series = {Applied Mechanics and Materials},
abstract = {This paper proposes a new method to optimize the control of the heating
system of a district in a way that fulfills the thermal regulations
and comfort in the whole district from one side and guarantees the
minimization of the energy consumption (and bill) from the other
side. This new method depends on coupling buildings with different
functionalities and needs. A heating plan for the coupled entities
will be generated afterwards. This plan makes advantage of the difference
in occupation timing of the buildings and has as constraints the
thermal comfort of the occupants and the maximum available energy.
This heating plan takes into consideration the building inertia to
design the supply plan and maintain the constraints.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
This paper proposes a new method to optimize the control of the heating
system of a district in a way that fulfills the thermal regulations
and comfort in the whole district from one side and guarantees the
minimization of the energy consumption (and bill) from the other
side. This new method depends on coupling buildings with different
functionalities and needs. A heating plan for the coupled entities
will be generated afterwards. This plan makes advantage of the difference
in occupation timing of the buildings and has as constraints the
thermal comfort of the occupants and the maximum available energy.
This heating plan takes into consideration the building inertia to
design the supply plan and maintain the constraints. |
2015Article de journal ER5 Auteurs : Breaban, Florin; Debuchy, Roger; Defer, Didier Laser Scanning Vibrometry and Holographic Interferometry Applied to Vibration Study Applied Mechanics and Materials, vol. 801, p. 303–311, 2015, (ACL). @article{Breaban2015,
title = {Laser Scanning Vibrometry and Holographic Interferometry Applied to Vibration Study},
author = {Florin Breaban and Roger Debuchy and Didier Defer},
doi = {10.4028/www.scientific.net/amm.801.303},
year = {2015},
date = {2015-10-01},
journal = {Applied Mechanics and Materials},
volume = {801},
pages = {303--311},
publisher = {Trans Tech Publications},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2015Proceedings Article ER5 Auteurs : Alhaj-Hasan, Ola; Abouaissa, Hassane; Defer, Didier On-line fast parametric estimation of building thermal behavior using algebraic methods Proc. IEEE Int. Conf. Building Efficiency and Sustainable Technologies, p. 5–10, 2015, (ACTI). @inproceedings{HasanAbouaissaDefer2015,
title = {On-line fast parametric estimation of building thermal behavior using algebraic methods},
author = {Ola Alhaj-Hasan and Hassane Abouaissa and Didier Defer},
doi = {10.1109/ICBEST.2015.7435856},
year = {2015},
date = {2015-01-01},
booktitle = {Proc. IEEE Int. Conf. Building Efficiency and Sustainable Technologies},
pages = {5--10},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2015Conférence ER5 Auteurs : Asli, Mounir; Brachelet, Franck; Antczak, Emmanuel; Defer, Didier; Chauchois, Alexis Coupled heat and mass transfer model to simulate hygrothermal behaviour of bio-based materials Third International Conference on Advances in Applied Science and Environmental Technology - ASET 2015, Bangkok, Thailand, Lebua Tower, 2015, (ACTI). @conference{Asli2015b,
title = {Coupled heat and mass transfer model to simulate hygrothermal behaviour of bio-based materials},
author = {Mounir Asli and Franck Brachelet and Emmanuel Antczak and Didier Defer and Alexis Chauchois},
year = {2015},
date = {2015-01-01},
booktitle = {Third International Conference on Advances in Applied Science and Environmental Technology - ASET 2015},
address = {Bangkok, Thailand, Lebua Tower},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Article de journal ER5 Auteurs : Chauchois, Alexis; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel; Choi, Hangseok Evaluation of gluing of CFRP onto concrete structures by infrared thermography coupled with thermal impedance Composites Part B: Engineering, vol. 69, p. 350–358, 2015, (ACL). @article{chau2015ab,
title = {Evaluation of gluing of CFRP onto concrete structures by infrared thermography coupled with thermal impedance},
author = {Alexis Chauchois and Franck Brachelet and Didier Defer and Emmanuel Antczak and Hangseok Choi},
year = {2015},
date = {2015-01-01},
journal = {Composites Part B: Engineering},
volume = {69},
pages = {350--358},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2015Conférence ER5 Auteurs : Chauchois, Alexis; Derbal, Radhouan; Defer, Didier; Brachelet, Franck Estimation of the moisture content based on a thermal analysis method Case of the sand Third International Conference on Advances in Applied Science and Environmental Technology - ASET 2015, Bangkok, Thailand, Lebua Tower, 2015, (ACTI). @conference{chau2015bb,
title = {Estimation of the moisture content based on a thermal analysis method Case of the sand},
author = {Alexis Chauchois and Radhouan Derbal and Didier Defer and Franck Brachelet},
editor = {IRED},
year = {2015},
date = {2015-01-01},
booktitle = {Third International Conference on Advances in Applied Science and Environmental Technology - ASET 2015},
address = {Bangkok, Thailand, Lebua Tower},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : Derbal, Radhouan; Defer, Didier; Antczak, Emmanuel; Chauchois, Alexis; Brachelet, Franck Applied Inverse Heat Transfer for Moisture Content Estimation THERMAM 2015 INTERNATIONAL CONFERENCE “THERMOPHYSICAL AND MECHANICAL PROPERTIES OF ADVANCED MATERIALS” and 4th ROSTOCKER INTERNATIONAL SYMPOSIUM: “THERMOPHYSICAL PROPERTIES FOR TECHNICAL THERMODYNAMICS”, 2015, (ACTI). @conference{Derb2015b,
title = {Applied Inverse Heat Transfer for Moisture Content Estimation},
author = {Radhouan Derbal and Didier Defer and Emmanuel Antczak and Alexis Chauchois and Franck Brachelet},
year = {2015},
date = {2015-01-01},
booktitle = {THERMAM 2015 INTERNATIONAL CONFERENCE “THERMOPHYSICAL AND MECHANICAL PROPERTIES OF ADVANCED MATERIALS” and 4th ROSTOCKER INTERNATIONAL SYMPOSIUM: “THERMOPHYSICAL PROPERTIES FOR TECHNICAL THERMODYNAMICS”},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2014Conférence ER5 Auteurs : Antczak, Emmanuel; Brachelet, Franck; Defer, Didier; Wu, Tingting Etude in situ des caracteristiques thermiques d une paroi a ossature bois Congres Materiaux 2014, 24-28 novembre 2014, Montpellier, France, 2014, (ACTN). @conference{antc2014b,
title = {Etude in situ des caracteristiques thermiques d une paroi a ossature bois},
author = {Emmanuel Antczak and Franck Brachelet and Didier Defer and Tingting Wu},
year = {2014},
date = {2014-01-01},
booktitle = {Congres Materiaux 2014, 24-28 novembre 2014, Montpellier, France},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2014Conférence ER5 Auteurs : Carpentier, Olivier; Antczak, Emmanuel; Brachelet, Franck; Defer, Didier; Descamps, Thierry; Parys, Laurent Van Characterization of density variations of historic timber structure by thermal methods Quantitative InfraRed Thermography, Bordeaux, 7-11 juillet 2014, 2014, (ACTI). @conference{carp2014a,
title = {Characterization of density variations of historic timber structure by thermal methods},
author = {Olivier Carpentier and Emmanuel Antczak and Franck Brachelet and Didier Defer and Thierry Descamps and Laurent Van Parys},
year = {2014},
date = {2014-01-01},
booktitle = {Quantitative InfraRed Thermography, Bordeaux, 7-11 juillet 2014},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2014Conférence ER5 Auteurs : Kenai, Mohammed Amine; Libessart, Laurent; Lassue, Stéphane; Defer, Didier An experimental investigation of the thermal effects of green walls:impact of plants obscuration on energy balance 9th International Energy Forum on Advanced Building Skins, 2014, (ACTI). @conference{Kena2014A,
title = {An experimental investigation of the thermal effects of green walls:impact of plants obscuration on energy balance},
author = {Mohammed Amine Kenai and Laurent Libessart and Stéphane Lassue and Didier Defer},
year = {2014},
date = {2014-01-01},
booktitle = {9th International Energy Forum on Advanced Building Skins},
pages = {925-938},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2014Article de journal ER5 Auteurs : Keo, Sam Ang; Brachelet, Franck; Breaban, Florin; Defer, Didier Steel detection in reinforced concrete wall by microwave infrared thermography NDT & E International, vol. 62, p. 172–177, 2014, (ACL). @article{Keo2014a,
title = {Steel detection in reinforced concrete wall by microwave infrared thermography},
author = {Sam Ang Keo and Franck Brachelet and Florin Breaban and Didier Defer},
year = {2014},
date = {2014-01-01},
journal = {NDT & E International},
volume = {62},
pages = {172--177},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER5 Auteurs : Keo, Sam Ang; Brachelet, Franck; Defer, Didier; Breaban, Florin Defects detection by infrared thermography with a new microwave excitation system Mechanics & Industry, vol. 15, no. 06, p. 509–516, 2014, (ACL). @article{Keo2014b,
title = {Defects detection by infrared thermography with a new microwave excitation system},
author = {Sam Ang Keo and Franck Brachelet and Didier Defer and Florin Breaban},
year = {2014},
date = {2014-01-01},
journal = {Mechanics & Industry},
volume = {15},
number = {06},
pages = {509--516},
publisher = {Cambridge Univ Press},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER5 Auteurs : Keo, Sam-Ang; Brachelet, Franck; Defer, Didier; Breaban, Florin Détection de Défauts par Thermographie Infrarouge avec un Nouveau Système d'excitation Micro-ondes Spectra Analyse, no. 297, 2014, (APTV). @article{KEO2014bb,
title = {Détection de Défauts par Thermographie Infrarouge avec un Nouveau Système d'excitation Micro-ondes},
author = {Sam-Ang Keo and Franck Brachelet and Didier Defer and Florin Breaban},
year = {2014},
date = {2014-01-01},
journal = {Spectra Analyse},
number = {297},
note = {APTV},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2014Conférence ER5 Auteurs : Tingting, Wu; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel Notion d'impedance thermique appliquee etude du comportement thermique d une pierre calcaire de construction a partir de mesures en laboratoire et in situ IBPSA, Arras, 20-21 Mai 2014, 2014, (ACTN). @conference{ttwu2014a,
title = {Notion d'impedance thermique appliquee etude du comportement thermique d une pierre calcaire de construction a partir de mesures en laboratoire et in situ},
author = {Wu Tingting and Franck Brachelet and Didier Defer and Emmanuel Antczak},
year = {2014},
date = {2014-01-01},
booktitle = {IBPSA, Arras, 20-21 Mai 2014},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2014Article de journal ER5 Auteurs : Alhaj-Hasan, Ola; Defer, Didier; Shahrour, Isam A simplified building thermal model for the optimization of energy consumption: Use of a random number generator Energy and Buildings, vol. 82, p. 322–329, 2014, (ACL). @article{Hasan2014,
title = {A simplified building thermal model for the optimization of energy consumption: Use of a random number generator},
author = {Ola Alhaj-Hasan and Didier Defer and Isam Shahrour},
year = {2014},
date = {2014-01-01},
journal = {Energy and Buildings},
volume = {82},
pages = {322--329},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER5 Auteurs : Alhaj-Hasan, Ola; Defer, Didier; Shahrour, Isam Optimization of District Heating Consumption Using Random Heating Scenario Generator. Applied Mechanics & Materials, vol. 704, 2014, (ACL). @article{HASAN2014a,
title = {Optimization of District Heating Consumption Using Random Heating Scenario Generator.},
author = {Ola Alhaj-Hasan and Didier Defer and Isam Shahrour},
year = {2014},
date = {2014-01-01},
journal = {Applied Mechanics & Materials},
volume = {704},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER5 Auteurs : Chaffar, Khaled; Chauchois, Alexis; Defer, Didier; Zalewski, Laurent Thermal characterization of homogeneous walls using inverse method Energy and Buildings, vol. 78, p. 248–255, 2014, (ACL). @article{chaff2014ab,
title = {Thermal characterization of homogeneous walls using inverse method},
author = {Khaled Chaffar and Alexis Chauchois and Didier Defer and Laurent Zalewski},
year = {2014},
date = {2014-01-01},
journal = {Energy and Buildings},
volume = {78},
pages = {248--255},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2014Conférence ER5 Auteurs : Chauchois, Alexis; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel Méthodes thermiques appliquées au contrôle non destructif du collage d'un renfort carbone sur une structure en béton Diagnobéton 2014, Toulouse, 20-21 Mars 2014, 2014, (ACTN). @conference{chau2014ab,
title = {Méthodes thermiques appliquées au contrôle non destructif du collage d'un renfort carbone sur une structure en béton},
author = {Alexis Chauchois and Franck Brachelet and Didier Defer and Emmanuel Antczak},
year = {2014},
date = {2014-01-01},
booktitle = {Diagnobéton 2014, Toulouse, 20-21 Mars 2014},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2014Article de journal ER5 Auteurs : Chauchois, Alexis; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel METHODES THERMIQUES APPLIQUEES AU CONTROLE NON DESTRUCTIF DU COLLAGE D'UN RENFORT CARBONE SUR UNE STRUCTURE EN BETON/THERMAL METHODS APPLIED TO NON-DESTRUCTIVE TESTING OF GLUING OF CARBON REINFORCEMENT ON A CONCRETE STRUCTURE Annales du Bâtiment et des Travaux Publics, vol. 66, no. 1-3, p. 7, 2014, (ACLN). @article{chau2014bb,
title = {METHODES THERMIQUES APPLIQUEES AU CONTROLE NON DESTRUCTIF DU COLLAGE D'UN RENFORT CARBONE SUR UNE STRUCTURE EN BETON/THERMAL METHODS APPLIED TO NON-DESTRUCTIVE TESTING OF GLUING OF CARBON REINFORCEMENT ON A CONCRETE STRUCTURE},
author = {Alexis Chauchois and Franck Brachelet and Didier Defer and Emmanuel Antczak},
year = {2014},
date = {2014-01-01},
journal = {Annales du Bâtiment et des Travaux Publics},
volume = {66},
number = {1-3},
pages = {7},
publisher = {Editions ESKA},
note = {ACLN},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2014Conférence ER5 Auteurs : Chauchois, Alexis; Defer, Didier; Antczak, Emmanuel; Brachelet, Franck Evaluation of gluing of CFRP onto concrete structures by infrared thermography coupled with thermal impedance 1st International Conference on Mechanics of Composites, Stony Brook University (NY – USA), 2014, (ACTI). @conference{chau2014cb,
title = {Evaluation of gluing of CFRP onto concrete structures by infrared thermography coupled with thermal impedance},
author = {Alexis Chauchois and Didier Defer and Emmanuel Antczak and Franck Brachelet},
year = {2014},
date = {2014-01-01},
booktitle = {1st International Conference on Mechanics of Composites},
address = {Stony Brook University (NY – USA)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2014Conférence ER5 Auteurs : Derbal, Radhouan; Defer, Didier; Chauchois, Alexis Construction materials thermal characterization by inverse method 20th European Conference on Thermophysical Properties, 2014, (ACTI). @conference{DERB2014Ab,
title = {Construction materials thermal characterization by inverse method},
author = {Radhouan Derbal and Didier Defer and Alexis Chauchois},
year = {2014},
date = {2014-08-01},
booktitle = {20th European Conference on Thermophysical Properties},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2014Article de journal ER5 Auteurs : Derbal, Radhouan; Defer, Didier; Chauchois, Alexis; Antczak, Emmanuel A simple method for building materials thermophysical properties estimation Construction and Building Materials, vol. 63, p. 197–205, 2014, (ACL). @article{Derbal2014197b,
title = {A simple method for building materials thermophysical properties estimation},
author = {Radhouan Derbal and Didier Defer and Alexis Chauchois and Emmanuel Antczak},
year = {2014},
date = {2014-01-01},
journal = {Construction and Building Materials},
volume = {63},
pages = {197--205},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2013Proceedings Article ER5 Auteurs : Carpentier, Olivier; Descamps, Thierry; Antczak, Emmanuel; VanParys, Laurent; Defer, Didier Characterization of wood defects by using thermal methods Proceedings of the SHATIS. 2nd International Conference on Structural Health Assessment of Timber Structures, 2013, (ACTI). @inproceedings{carp2013a,
title = {Characterization of wood defects by using thermal methods},
author = {Olivier Carpentier and Thierry Descamps and Emmanuel Antczak and Laurent VanParys and Didier Defer},
year = {2013},
date = {2013-01-01},
booktitle = {Proceedings of the SHATIS. 2nd International Conference on Structural Health Assessment of Timber Structures},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2013Book Section ER5 Auteurs : Du, Tao; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel Quantitative Evaluation of Thermal Diffusivity and Thickness of Mortar Cover Using Induction Thermography Nondestructive Testing of Materials and Structures, p. 285–291, Springer, 2013, (OS). @incollection{Du2013,
title = {Quantitative Evaluation of Thermal Diffusivity and Thickness of Mortar Cover Using Induction Thermography},
author = {Tao Du and Franck Brachelet and Didier Defer and Emmanuel Antczak},
year = {2013},
date = {2013-01-01},
booktitle = {Nondestructive Testing of Materials and Structures},
pages = {285--291},
publisher = {Springer},
note = {OS},
keywords = {ER5},
pubstate = {published},
tppubtype = {incollection}
}
|
2013Article de journal ER5 Auteurs : Keo, Sam-Ang; Brachelet, Franck; Breaban, Florin; Defer, Didier Development of an Infrared Thermography Method with CO2 Laser Excitation, Applied to Defect Detection in CFRP Int. Journal of Physical, Nuclear Science and Engineering, vol. 7, no. 8, p. 201, 2013, (ACL). @article{Keo2013a,
title = {Development of an Infrared Thermography Method with CO2 Laser Excitation, Applied to Defect Detection in CFRP},
author = {Sam-Ang Keo and Franck Brachelet and Florin Breaban and Didier Defer},
year = {2013},
date = {2013-01-01},
journal = {Int. Journal of Physical, Nuclear Science and Engineering},
volume = {7},
number = {8},
pages = {201},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER5 Auteurs : Keo, Sam-Ang; Defer, Didier; Breaban, Florin; Brachelet, Franck Comparison between microwave infrared thermography and CO 2 Laser infrared thermography in defect detection in applications with CFRP Materials Sciences and Applications, vol. 2013, 2013, (ACL). @article{keo2013b,
title = {Comparison between microwave infrared thermography and CO 2 Laser infrared thermography in defect detection in applications with CFRP},
author = {Sam-Ang Keo and Didier Defer and Florin Breaban and Franck Brachelet},
year = {2013},
date = {2013-01-01},
journal = {Materials Sciences and Applications},
volume = {2013},
publisher = {Scientific Research Publishing},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2013Proceedings Article ER5 Auteurs : Keo, Sam-Ang; Brachelet, Franck; Breaban, Florin; Defer, Didier Development of an Infrared Thermography Method with CO2 Laser Excitation, Applied to Defect Detection in CFRP Proceedings of World Academy of Science, Engineering and Technology, p. 186, World Academy of Science, Engineering and Technology (WASET) 2013, (ACTI). @inproceedings{keo2013c,
title = {Development of an Infrared Thermography Method with CO2 Laser Excitation, Applied to Defect Detection in CFRP},
author = {Sam-Ang Keo and Franck Brachelet and Florin Breaban and Didier Defer},
year = {2013},
date = {2013-01-01},
booktitle = {Proceedings of World Academy of Science, Engineering and Technology},
number = {80},
pages = {186},
organization = {World Academy of Science, Engineering and Technology (WASET)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2013Conférence ER5 Auteurs : Chauchois, Alexis; Defer, Didier; Antczak, Emmanuel; Brachelet, Franck Study CFRP bounding quality using IR technique & thermal impedance XIème Colloque Universitaire Franco-Québécois sur la thermique des systèmes, Reims (France), 2013, (ACTI). @conference{chau2013ab,
title = {Study CFRP bounding quality using IR technique & thermal impedance},
author = {Alexis Chauchois and Didier Defer and Emmanuel Antczak and Franck Brachelet},
year = {2013},
date = {2013-01-01},
booktitle = {XIème Colloque Universitaire Franco-Québécois sur la thermique des systèmes},
address = {Reims (France)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2012Article de journal ER5 Auteurs : Carpentier, Olivier; Antczak, Emmanuel; Chartier, Thierry; Defer, Didier Frequency methods applied to the characterization of physical propertiesof granular material with a cylindrical probe International Journalof Ŧhermophysics, vol. 33-1, p. 105-120, 2012, (ACL). @article{carp2012a,
title = {Frequency methods applied to the characterization of physical propertiesof granular material with a cylindrical probe},
author = {Olivier Carpentier and Emmanuel Antczak and Thierry Chartier and Didier Defer},
url = {http://www.springerlink.com/index/87207326G2161260.pdf http://link.springer.com/10.1007/s10765-011-1112-x},
doi = {10.1007/s10765-011-1112-x},
year = {2012},
date = {2012-01-01},
journal = {International Journalof Ŧhermophysics},
volume = {33-1},
pages = {105-120},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER5 Auteurs : Shen, Jiboa; Defer, Didier; Antczak, Emmanuel; Duthoit, Bruno Characterization of a Ħumid Concrete by Study of Ŧhermal Impedance Materials Ŧransactions,, vol. 53 -02, p. 270-273, 2012, (ACL). @article{SHEN2012,
title = {Characterization of a Ħumid Concrete by Study of Ŧhermal Impedance},
author = {Jiboa Shen and Didier Defer and Emmanuel Antczak and Bruno Duthoit},
year = {2012},
date = {2012-01-01},
journal = {Materials Ŧransactions,},
volume = {53 -02},
pages = {270-273},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER5 Auteurs : Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier; Brachelet, Franck In situ characterization of thermophysical properties of a soil - Measurement and monitoring of soil water content with a thermal prob J. Renewable Sustainable Energy, vol. 4, p. 17 pages., 2012, (ACL). @article{chau2012ab,
title = {In situ characterization of thermophysical properties of a soil - Measurement and monitoring of soil water content with a thermal prob},
author = {Alexis Chauchois and Emmanuel Antczak and Didier Defer and Franck Brachelet},
url = {http://scitation.aip.org/content/aip/journal/jrse/4/4/10.1063/1.4737138},
doi = {10.1063/1.4737138},
year = {2012},
date = {2012-01-01},
journal = {J. Renewable Sustainable Energy},
volume = {4},
pages = {17 pages.},
abstract = {A. Chauchois, E. Antczak, D. Defer, F. Brachelet, « In situ characterization
of thermophysical properties of a soil – Measurement and monitoring
of soil water content with a thermal probe », J. Renewable Sustainable
Energy 4, 043106 (2012); 17 pages.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
A. Chauchois, E. Antczak, D. Defer, F. Brachelet, « In situ characterization
of thermophysical properties of a soil – Measurement and monitoring
of soil water content with a thermal probe », J. Renewable Sustainable
Energy 4, 043106 (2012); 17 pages. |
2011Conférence ER5 Auteurs : Brachelet, Franck; Du, Tao; Defer, Didier; Antczak, Emmanuel Détermination de la diffusivité thermique et de l épaisseur de béton d enrobage par thermographie infrarouge XXIXèmes rencontres universitaires de Génie Civil, Tlemcen, Algérie, 29-31 mai 2011, 2011, (ACTN). @conference{brac2011a,
title = {Détermination de la diffusivité thermique et de l épaisseur de béton d enrobage par thermographie infrarouge},
author = {Franck Brachelet and Tao Du and Didier Defer and Emmanuel Antczak},
year = {2011},
date = {2011-01-01},
booktitle = {XXIXèmes rencontres universitaires de Génie Civil, Tlemcen, Algérie, 29-31 mai 2011},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2011Conférence ER5 Auteurs : Du, Tao; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel Quantitative Evaluation of Ŧhermal Điffusivity and Ŧhickness of Mortar Cover using Induction Ŧhermography Nondestructive testing of materials and structures, Istanbul, Turkey, May 15-18, 2011, vol. V 6, 2011, (ACTI). @conference{DUTA2011A,
title = {Quantitative Evaluation of Ŧhermal Điffusivity and Ŧhickness of Mortar Cover using Induction Ŧhermography},
author = {Tao Du and Franck Brachelet and Didier Defer and Emmanuel Antczak},
editor = {New York : Springer},
year = {2011},
date = {2011-01-01},
booktitle = {Nondestructive testing of materials and structures, Istanbul, Turkey, May 15-18, 2011},
volume = {V 6},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2011Article de journal ER5 Auteurs : Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier; Carpentier, Olivier Formalism of thermal waves applied to the characterization of materialsthermal effusivity, Review of Scientific Instruments, 2011 Review of Scientific Instruments, vol. Vol.82 - issue 7, p. pp. 074902-1 / 07490, 2011, (ACL). @article{chau2011ab,
title = {Formalism of thermal waves applied to the characterization of materialsthermal effusivity, Review of Scientific Instruments, 2011},
author = {Alexis Chauchois and Emmanuel Antczak and Didier Defer and Olivier Carpentier},
url = {http://www.ncbi.nlm.nih.gov/pubmed/21806216},
doi = {10.1063/1.3600899},
year = {2011},
date = {2011-01-01},
journal = {Review of Scientific Instruments},
volume = {Vol.82 - issue 7},
pages = {pp. 074902-1 / 07490},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Wu, Tingting; Antczak, Emmanuel; Defer, Didier; Chartier, Thierry Thermal characteristics in situ monitoring of detached house wall constituted by raw clay European Journal of Environmental and Civil Engineering, vol. 14, no. 5, p. 653–667, 2010, (ACL). @article{wu2010a,
title = {Thermal characteristics in situ monitoring of detached house wall constituted by raw clay},
author = {Tingting Wu and Emmanuel Antczak and Didier Defer and Thierry Chartier},
year = {2010},
date = {2010-01-01},
journal = {European Journal of Environmental and Civil Engineering},
volume = {14},
number = {5},
pages = {653--667},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2009Proceedings Article ER5 Auteurs : Brachelet, Franck; Du, Tao; Defer, Didier; Antczak, Emmanuel Detection of poor filling in prestressed beams specimen by inductive thermography and transfer function analysis Proceedings of the 7th International Symposium on Non-destructive Testing in Civil Engineering, Nantes, France, June 30th-July 3rd, Citeseer 2009, (ACTI). @inproceedings{BracheletDuDeferEtAl2009,
title = {Detection of poor filling in prestressed beams specimen by inductive thermography and transfer function analysis},
author = {Franck Brachelet and Tao Du and Didier Defer and Emmanuel Antczak},
year = {2009},
date = {2009-01-01},
booktitle = {Proceedings of the 7th International Symposium on Non-destructive Testing in Civil Engineering, Nantes, France, June 30th-July 3rd},
organization = {Citeseer},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2009Article de journal ER5 Auteurs : Defer, Didier; Chauchois, Alexis; Antczak, Emmanuel; Carpentier, Olivier Đetermination of Ŧhermal Properties in the Frequency Đomain Basedon a Non-integer Model: Application to a Sample of Concrete, InternationalJournal of Ŧhermophysics Volume 30, issue 3 p.1025-1039, 2009 International Journal of Thermophysics, 2009, (ACL). @article{DEFER2009b,
title = {Đetermination of Ŧhermal Properties in the Frequency Đomain Basedon a Non-integer Model: Application to a Sample of Concrete, InternationalJournal of Ŧhermophysics Volume 30, issue 3 p.1025-1039, 2009},
author = {Didier Defer and Alexis Chauchois and Emmanuel Antczak and Olivier Carpentier},
doi = {http://dx.doi.org/10.1007/s10765-009-0598-y},
year = {2009},
date = {2009-01-01},
journal = {International Journal of Thermophysics},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER5 Auteurs : Breaban, Florin; Defer, Didier; Duthoit, Bruno Controle non destructif par Vibrometrie Laser par rapport aux techniquesĦolographiques CONTRO”LES-ESSAIS-MESURES, Optique-Avis d experts,, 2008, (ACLN). @article{brea2008a,
title = {Controle non destructif par Vibrometrie Laser par rapport aux techniquesĦolographiques},
author = {Florin Breaban and Didier Defer and Bruno Duthoit},
year = {2008},
date = {2008-01-01},
journal = {CONTRO”LES-ESSAIS-MESURES, Optique-Avis d experts,},
note = {ACLN},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER5 Auteurs : Carpentier, Olivier; Defer, Didier; Antczak, Emmanuel; Chauchois, Alexis; Duthoit, Bruno In situ thermal properties characterization using frequential methods Energy and Buildings, vol. 40, p. 300 - 307, 2008, (ACL). @article{carp2008ab,
title = {In situ thermal properties characterization using frequential methods},
author = {Olivier Carpentier and Didier Defer and Emmanuel Antczak and Alexis Chauchois and Bruno Duthoit},
url = {http://www.sciencedirect.com/science/article/pii/S0378778807000898},
doi = {http://dx.doi.org/10.1016/j.enbuild.2007.02.031},
year = {2008},
date = {2008-01-01},
journal = {Energy and Buildings},
volume = {40},
pages = {300 - 307},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2008Conférence ER5 Auteurs : Gao, Ying; Defer, Didier; Antczak, Emmanuel; Chauchois, Alexis; Carpentier, Olivier Development of a probe designed to measure the effusivity and diffusivity of granular materials 5th European Thermal-Sciences Conference, Eindhoven (Netherlands), 2008, (ACTI). @conference{Gao2008b,
title = {Development of a probe designed to measure the effusivity and diffusivity of granular materials},
author = {Ying Gao and Didier Defer and Emmanuel Antczak and Alexis Chauchois and Olivier Carpentier},
year = {2008},
date = {2008-01-01},
booktitle = {5th European Thermal-Sciences Conference},
address = {Eindhoven (Netherlands)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2008Conférence ER5 Auteurs : Shen, Jibao; Antczak, Emmanuel; Defer, Didier; Chauchois, Alexis Caractérisation thermophysique d’un béton - Application à la détection de dégradations induites par des cycles gel-dégel XXVIèmes rencontres universitaires de Génie Civil, Nancy (France), 2008, (ACTI). @conference{Shen2008b,
title = {Caractérisation thermophysique d’un béton - Application à la détection de dégradations induites par des cycles gel-dégel},
author = {Jibao Shen and Emmanuel Antczak and Didier Defer and Alexis Chauchois},
year = {2008},
date = {2008-01-01},
booktitle = {XXVIèmes rencontres universitaires de Génie Civil},
address = {Nancy (France)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2007Conférence ER5 Auteurs : Carpentier, Olivier; Defer, Didier; Antczak, Emmanuel; Chauchois, Alexis; Duthoit, Bruno Identification in-situ des propriétés thermophysiques d'un sol par méthodes fréquentielles VIIIème Colloque Universitaire Franco-Québécois sur la thermique des systèmes, Montréal (Canada), 2007, (ACTI). @conference{Carp2007b,
title = {Identification in-situ des propriétés thermophysiques d'un sol par méthodes fréquentielles},
author = {Olivier Carpentier and Didier Defer and Emmanuel Antczak and Alexis Chauchois and Bruno Duthoit},
year = {2007},
date = {2007-01-01},
booktitle = {VIIIème Colloque Universitaire Franco-Québécois sur la thermique des systèmes},
address = {Montréal (Canada)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2007Article de journal ER5 Auteurs : Antczak, Emmanuel; Defer, Didier; Elaoami, M; Chauchois, Alexis; Duthoit, Bruno Monitoring and thermal characterisation of cement matrix materials using non-destructive testing NDT & E International, vol. 40, no. 6, p. 428–438, 2007, (ACL). @article{Antczak2007b,
title = {Monitoring and thermal characterisation of cement matrix materials using non-destructive testing},
author = {Emmanuel Antczak and Didier Defer and M Elaoami and Alexis Chauchois and Bruno Duthoit},
doi = {10.1016/j.ndteint.2007.02.006},
year = {2007},
date = {2007-09-01},
journal = {NDT & E International},
volume = {40},
number = {6},
pages = {428--438},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2006Conférence ER5 Auteurs : Chauchois, Alexis; Defer, Didier; Antczak, Emmanuel Caractérisation thermique d’un échantillon de béton par impédance thermique en utilisant la théorie des modèles d’ordre non entiers XXIVèmes Rencontres Universitaires de Génie Civil, La Grande Motte (France), 2006, (ACTI). @conference{chau2006ab,
title = {Caractérisation thermique d’un échantillon de béton par impédance thermique en utilisant la théorie des modèles d’ordre non entiers},
author = {Alexis Chauchois and Didier Defer and Emmanuel Antczak},
year = {2006},
date = {2006-01-01},
booktitle = {XXIVèmes Rencontres Universitaires de Génie Civil},
address = {La Grande Motte (France)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2005Article de journal ER5 Auteurs : Carpentier, Olivier; Defer, Didier; Antczak, Emmanuel; Duthoit, Bruno The use of infrared thermographic and GPS topographic surveys to monitor spontaneous combustion of coal tips Applied Thermal Engineering, vol. 25, no. 17-18, p. 2677–2686, 2005, (ACL). @article{Carpentier2005,
title = {The use of infrared thermographic and GPS topographic surveys to monitor spontaneous combustion of coal tips},
author = {Olivier Carpentier and Didier Defer and Emmanuel Antczak and Bruno Duthoit},
doi = {10.1016/j.applthermaleng.2004.11.017},
year = {2005},
date = {2005-12-01},
journal = {Applied Thermal Engineering},
volume = {25},
number = {17-18},
pages = {2677--2686},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2005Conférence ER5 Auteurs : Chauchois, Alexis; Defer, Didier; Antczak, Emmanuel; Duthoit, Bruno Assessment of thermal impedance from noninteger models applied to the concrete souding Colloque International Francophone Pentom (performances et nouvelles technologies en maintenance), Marrakech (Maroc), 2005, (ACTI). @conference{chau2005ab,
title = {Assessment of thermal impedance from noninteger models applied to the concrete souding},
author = {Alexis Chauchois and Didier Defer and Emmanuel Antczak and Bruno Duthoit},
year = {2005},
date = {2005-01-01},
booktitle = {Colloque International Francophone Pentom (performances et nouvelles technologies en maintenance)},
address = {Marrakech (Maroc)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2005Conférence ER5 Auteurs : Jarkass, Chadi; Antczak, Emmanuel; Chauchois, Alexis; Defer, Didier; Duthoit, Bruno Characterization of a soil by thermal impedance, application to the in situ monitoring of the soil moisture 7ème Colloque International Franco-Quebecois « Thermique des Systèmes à Température Modérée », Saint Malo (France), 2005, (ACTI). @conference{Jark2005b,
title = {Characterization of a soil by thermal impedance, application to the in situ monitoring of the soil moisture},
author = {Chadi Jarkass and Emmanuel Antczak and Alexis Chauchois and Didier Defer and Bruno Duthoit},
year = {2005},
date = {2005-01-01},
booktitle = {7ème Colloque International Franco-Quebecois « Thermique des Systèmes à Température Modérée »},
address = {Saint Malo (France)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2003Conférence ER5 Auteurs : Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier; Duthoit, Bruno Auscultation de parements en béton par couplage d'impédance thermique et de thermographie infrarouge 6ème Colloque « Thermique des Systèmes à Température Modérée », Québec (Canada), 2003, (ACTI). @conference{Chau2003b,
title = {Auscultation de parements en béton par couplage d'impédance thermique et de thermographie infrarouge},
author = {Alexis Chauchois and Emmanuel Antczak and Didier Defer and Bruno Duthoit},
year = {2003},
date = {2003-01-01},
booktitle = {6ème Colloque « Thermique des Systèmes à Température Modérée »},
address = {Québec (Canada)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2003Article de journal ER5 Auteurs : Chauchois, Alexis; Defer, Didier; Antczak, Emmanuel; Duthoit, Bruno Use of noninteger identification models for monitoring soil water content Measurement Science and Technology, vol. 14, no. 6, p. 868, 2003, (ACL). @article{ChauchoisDidierEmmanuelEtAl2003b,
title = {Use of noninteger identification models for monitoring soil water content},
author = {Alexis Chauchois and Didier Defer and Emmanuel Antczak and Bruno Duthoit},
year = {2003},
date = {2003-01-01},
journal = {Measurement Science and Technology},
volume = {14},
number = {6},
pages = {868},
publisher = {IOP Publishing},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2002Conférence ER5 Auteurs : Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier; Duthoit, Bruno Characterization of the thermal effusivity of a system by fractional differential equations. Application to a wet soil exposed to natural weathering 16 TH ECTP (European Conference on Thermo Physical Properties, London (GB), 2002, (ACTI). @conference{Chau2002b,
title = {Characterization of the thermal effusivity of a system by fractional differential equations. Application to a wet soil exposed to natural weathering},
author = {Alexis Chauchois and Emmanuel Antczak and Didier Defer and Bruno Duthoit},
year = {2002},
date = {2002-01-01},
booktitle = {16 TH ECTP (European Conference on Thermo Physical Properties},
address = {London (GB)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2001Article de journal ER5 Auteurs : Defer, Didier; Antczak, Emmanuel; Duthoit, Bruno Measurement of low-thermal effusivity of building materials using thermal impedance method Measurement Science and Technology, vol. 12, no. 5, p. 549, 2001, (ACL). @article{DeferAntczakDuthoit2001,
title = {Measurement of low-thermal effusivity of building materials using thermal impedance method},
author = {Didier Defer and Emmanuel Antczak and Bruno Duthoit},
year = {2001},
date = {2001-01-01},
journal = {Measurement Science and Technology},
volume = {12},
number = {5},
pages = {549},
publisher = {IOP Publishing},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2001Article de journal ER5 Auteurs : Delacre, Elisabeth; Defer, Didier; Antczak, Emmanuel; Duthoit, Bruno Identification by thermal impedance: application to wet materials High Temperatures. High Pressures, vol. 33, no. 3, p. 337–344, 2001, (ACL). @article{DelacreDeferAntczakEtAl2001,
title = {Identification by thermal impedance: application to wet materials},
author = {Elisabeth Delacre and Didier Defer and Emmanuel Antczak and Bruno Duthoit},
year = {2001},
date = {2001-01-01},
journal = {High Temperatures. High Pressures},
volume = {33},
number = {3},
pages = {337--344},
publisher = {Pion},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2001Conférence ER5 Auteurs : Chauchois, Alexis; Defer, Didier; Antczak, Emmanuel; Duthoit, Bruno Monitoring of the water content of a porous environment by measurement of the thermal effusivity 5ème Colloque « Thermique des Systèmes à Température Modérée », Lyon (France), 2001, (ACTI). @conference{chau2001ab,
title = {Monitoring of the water content of a porous environment by measurement of the thermal effusivity},
author = {Alexis Chauchois and Didier Defer and Emmanuel Antczak and Bruno Duthoit},
year = {2001},
date = {2001-01-01},
booktitle = {5ème Colloque « Thermique des Systèmes à Température Modérée »},
address = {Lyon (France)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
1998Article de journal ER5 Auteurs : Defer, Didier; Antczak, Emmanuel; Duthoit, Bruno The characterization of thermophysical properties by thermal impedance measurements taken under random stimuli taking sensor-induced disturbance into account Measurement Science and Technology, vol. 9, no. 3, p. 496, 1998, (ACL). @article{DeferAntczakDuthoit1998,
title = {The characterization of thermophysical properties by thermal impedance measurements taken under random stimuli taking sensor-induced disturbance into account},
author = {Didier Defer and Emmanuel Antczak and Bruno Duthoit},
year = {1998},
date = {1998-01-01},
journal = {Measurement Science and Technology},
volume = {9},
number = {3},
pages = {496},
publisher = {IOP Publishing},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
1994Thèse ER5 Auteurs : Defer, Didier Théorie du signal appliquée à la caractérisation thermique et au contrôle non destructif des ouvrages in situ sous sollicitations aléatoires 1994, (TH). @phdthesis{Defer1994,
title = {Théorie du signal appliquée à la caractérisation thermique et au contrôle non destructif des ouvrages in situ sous sollicitations aléatoires},
author = {Didier Defer},
year = {1994},
date = {1994-01-01},
note = {TH},
keywords = {ER5},
pubstate = {published},
tppubtype = {phdthesis}
}
|
1994Article de journal ER5 Auteurs : Duthoit, Bruno; Defer, Didier; Antczak, Emmanuel; Oter, Liliane In-situ characterization of soil effusivity by measurement of thermal admittance High Temperatures. High Pressures, vol. 26, no. 2, p. 225–230, 1994, (ACL). @article{DuthoitDeferAntczakEtAl1994,
title = {In-situ characterization of soil effusivity by measurement of thermal admittance},
author = {Bruno Duthoit and Didier Defer and Emmanuel Antczak and Liliane Oter},
year = {1994},
date = {1994-01-01},
journal = {High Temperatures. High Pressures},
volume = {26},
number = {2},
pages = {225--230},
publisher = {Pion},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
