Membre

@article{talibi:hal-04522718,

title = {Impact of treated red-algae fibers on physico-mechanical behavior of compressed earth bricks for construction},

author = {Soukayna Talibi and Jonathan Page and Chafika Djelal-Dantec and Latifa Saâdi},

url = {https://hal.science/hal-04522718},

doi = {10.1080/19648189.2024.2329722},

year  = {2024},

date = {2024-03-01},

urldate = {2024-03-01},

journal = {European Journal of Environmental and Civil Engineering},

pages = {1-34},

publisher = {Taylor & Francis},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@incollection{vanhove:hal-04636072,

title = {State of Knowledge of Interface Rheometers and Tribometers},

author = {Yannick and Chafika Djelal-Dantec and Tilo Proske},

url = {https://hal.science/hal-04636072},

doi = {10.1007/978-3-031-36743-4_7},

year  = {2024},

date = {2024-10-01},

urldate = {2024-10-01},

booktitle = {Measuring Rheological Properties of Cement-based Materials},

volume = {39},

pages = {181-192},

series = {RILEM State-of-the-Art Reports},

note = {DO},

keywords = {ER3},

pubstate = {published},

tppubtype = {incollection}

}

@article{libessart:hal-04072397,

title = {Synthesis and characterization of release agent from used cooking oil at the concrete/formwork interface},

author = {Laurent Libessart and R. Anceur and Chafika Djelal-Dantec and A. Aljawish and M. Millares},

url = {https://hal.science/hal-04072397},

doi = {10.1007/s13762-023-04918-5},

year  = {2023},

date = {2023-04-01},

urldate = {2023-04-01},

journal = {International Journal of Environmental Science and Technology},

publisher = {Springer},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{schlupp:hal-04136678,

title = {Use of biomass bottom ash as granular substitute in mortar},

author = {Florian Schlupp and Jonathan Page and Chafika Djelal-Dantec and Laurent Libessart},

url = {https://hal.science/hal-04136678},

doi = {10.1016/j.jobe.2023.106927},

year  = {2023},

date = {2023-09-01},

urldate = {2023-09-01},

journal = {Journal of Building Engineering},

volume = {75},

pages = {106927},

publisher = {Elsevier},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{ajouguim:hal-04136684,

title = {Effect of treated Alfa fibers on hydration kinetics, mechanical, and adhesion properties of fiber cement composite},

author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and Latifa Saâdi},

url = {https://hal.science/hal-04136684},

doi = {10.1016/j.jobe.2023.106558},

year  = {2023},

date = {2023-07-01},

urldate = {2023-07-01},

journal = {Journal of Building Engineering},

volume = {71},

pages = {106558},

publisher = {Elsevier},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{libessart:hal-04072397b,

title = {Synthesis and characterization of release agent from used cooking oil at the concrete/formwork interface},

author = {Laurent Libessart and R. Anceur and Chafika Djelal-Dantec and A. Aljawish and M. Millares},

url = {https://hal.science/hal-04072397},

doi = {10.1007/s13762-023-04918-5},

year  = {2023},

date = {2023-04-01},

urldate = {2023-04-01},

journal = {International Journal of Environmental Science and Technology},

publisher = {Springer},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{feys:hal-04136704,

title = {RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-rheometers, mixtures and procedures},

author = {Dimitri Feys and Mohammed Sonebi and Sofiane Amziane and Chafika Djelal-Dantec and Khadija El-Cheikh and Shirin Fataei and Markus Greim and Irina Ivanova and Helena Keller and Kamal Khayat and Yannick Vanhove and Laurent Libessart and Viktor Mechtcherine and Ivan Navarrete and Arnaud Perrot and Egor Secrieru},

url = {https://hal.science/hal-04136704},

doi = {10.1617/s11527-023-02173-1},

year  = {2023},

date = {2023-05-01},

urldate = {2023-05-01},

journal = {Materials and structures},

volume = {56},

number = {4},

pages = {90},

publisher = {Springer Verlag},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{talibi:hal-04136770,

title = {Study of earth-based materials for manufacturing compaction process},

author = {Soukayna Talibi and Jonathan Page and Chafika Djelal-Dantec and Mohamed Waqif and Latifa Saâdi},

url = {https://hal.science/hal-04136770},

doi = {10.1016/j.jobe.2022.105546},

year  = {2023},

date = {2023-04-01},

urldate = {2023-04-01},

journal = {Journal of Building Engineering},

volume = {64},

number = {6},

pages = {105546},

publisher = {Elsevier},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{leussa:hal-04267485,

title = {Pozzolanic activity of kaolinite material rich in gibbsite calcined at low temperature and its effect on physical and mechanical properties of Portland cement mortars},

author = {Claudia Charlotte Tchamo Leussa and Chantale Njiomou Djangang and Laurent Libessart and Tiffo E. and Chafika Djelal-Dantec and Antoine Elimbi},

url = {https://univ-artois.hal.science/hal-04267485},

year  = {2023},

date = {2023-09-01},

urldate = {2023-09-01},

journal = {Journal of Materials and Environmental Science },

volume = {14},

number = {9},

pages = {1096-1108},

publisher = {Mohammed Premier University},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@incollection{vanhove:hal-04356419,

title = {Formwork technology, interface conditions and friction behaviour},

author = {Yannick Vanhove and Chafika Djelal-Dantec and J. H Kim and Proske Tilo},

url = {https://univ-artois.hal.science/hal-04356419},

year  = {2023},

date = {2023-01-01},

urldate = {2023-01-01},

booktitle = {Measuring rheological properties of cement-based materials},

pages = {Chapitre 5},

note = {OS},

keywords = {ER3},

pubstate = {published},

tppubtype = {incollection}

}

@incollection{vanhove:hal-04356443,

title = {State of knowledge of interface rheometry},

author = {Yannick Vanhove and Chafika Djelal-Dantec and Laurent Libessart and Proske Tilo and Egor Secrieru and Dimitri Feys},

url = {https://univ-artois.hal.science/hal-04356443},

year  = {2023},

date = {2023-10-01},

urldate = {2023-10-01},

booktitle = {Measuring rheological properties of cement-based materials, Report of RILEM Technical committee 266 MRP},

pages = {Chapitre 7},

note = {OS},

keywords = {ER3},

pubstate = {published},

tppubtype = {incollection}

}

@article{schlupp:hal-04285039,

title = {Influence of recycled sand from biomass combustion on the mechanical, hydration and porous properties of mortar mixtures},

author = {Florian Schlupp and Jonathan Page and Chafika Djelal-Dantec and Laurent Libessart},

url = {https://hal.science/hal-04285039},

doi = {10.1016/j.conbuildmat.2023.133193},

year  = {2023},

date = {2023-11-01},

urldate = {2023-11-01},

journal = {Construction and Building Materials},

volume = {404},

pages = {133193},

publisher = {Elsevier},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{ndongengone:hal-03766721,

title = {Evaluation of Effective Elastic Properties for Wood--Cement Composites: Experimental and Computational Investigations},

author = {Jean Gérard Ndong Engone and Ahmed El Moumen and Chafika Djelal-Dantec and Abdellatif Imad and Toufik Kanit and Jonathan Page},

url = {https://hal.archives-ouvertes.fr/hal-03766721},

doi = {10.3390/su14148638},

year  = {2022},

date = {2022-07-01},

urldate = {2022-07-01},

journal = {Sustainability},

volume = {14},

number = {14},

pages = {8638},

publisher = {MDPI},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{ndongengone:hal-03766721b,

title = {Evaluation of Effective Elastic Properties for Wood--Cement Composites: Experimental and Computational Investigations},

author = {Jean Gérard Ndong Engone and Ahmed El Moumen and Chafika Djelal-Dantec and Abdellatif Imad and Toufik Kanit and Jonathan Page},

url = {https://hal.science/hal-03766721},

doi = {10.3390/su14148638},

year  = {2022},

date = {2022-07-01},

urldate = {2022-07-01},

journal = {Sustainability},

volume = {14},

number = {14},

pages = {8638},

publisher = {MDPI},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{ajouguim:hal-03522400b,

title = {Performance of Alfa fibres in cementitious materials exposed to diverse surface treatments},

author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and Mohamed Waqif and Latifa Saadi},

url = {https://hal.science/hal-03522400},

doi = {10.4028/www.scientific.net/CTA.1.660},

year  = {2022},

date = {2022-01-01},

urldate = {2022-01-01},

journal = {Construction Technologies and Architecture},

volume = {1},

pages = {660-667},

publisher = {copyrightTrans Tech Publications Ltd, Switzerland},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@inproceedings{schlupp:hal-03881451,

title = {Effet de la combustion sur les cendres sous foyer de biomasse - Valorisation en tant que sable dans un mortier},

author = {Florian Schlupp and Jonathan Page and Chafika Djelal-Dantec and Laurent Libessart},

url = {https://hal.archives-ouvertes.fr/hal-03881451},

year  = {2022},

date = {2022-11-01},

urldate = {2022-11-01},

booktitle = {NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité},

address = {Montpellier, France},

organization = {IMT Mines Al`es and LMGC and LIFAM},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {inproceedings}

}

@article{Page2021,

title = {Using linseed oil as flax fibre coating for fibre-reinforced cementitious composite},

author = {Jonathan Page and Sofiane Amziane and Moussa Gomina and Chafika Djelal-Dantec and Fabrice Audonnet},

doi = {10.1016/j.indcrop.2020.113168},

year  = {2021},

date = {2021-03-01},

journal = {Industrial Crops and Products},

volume = {161},

pages = {113168},

publisher = {Elsevier BV},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Ajouguim2021,

title = {Effect of Alfa fibers on the mechanical and thermal properties of compacted earth bricks},

author = {Soukaina Ajouguim and S Talibi and Chafika Djelal-Dantec and H Hajjou and M Waqif and M Stefanidou and L Saadi},

doi = {10.1016/j.matpr.2020.07.539},

year  = {2021},

date = {2021-01-01},

journal = {Materials Today: Proceedings},

volume = {37},

pages = {4049--4057},

publisher = {Elsevier BV},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Vanhove2021,

title = {Influence of the formwork removal by polarization on the facing aesthetics in reinforced concrete},

author = {Yannick Vanhove and Chafika Djelal-Dantec},

doi = {10.1016/j.conbuildmat.2021.122841},

year  = {2021},

date = {2021-05-01},

journal = {Construction and Building Materials},

volume = {284},

pages = {122841},

publisher = {Elsevier BV},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{SPITZ2021124233,

title = {Characterizing tribological behavior of fresh concrete against formwork surfaces},

author = {Nicolas Spitz and Nicolas Coniglio and Laurent Libessart and Mohamed El Mansori and Chafika Djelal-Dantec},

url = {https://www.sciencedirect.com/science/article/pii/S0950061821019930},

doi = {https://doi.org/10.1016/j.conbuildmat.2021.124233},

issn = {0950-0618},

year  = {2021},

date = {2021-01-01},

urldate = {2021-01-01},

journal = {Construction and Building Materials},

volume = {303},

pages = {124233},

abstract = {Concrete walls are constructed by pouring fresh concrete in-between formworks. The lifespan of these formworks is limited due to the abrasive nature of concrete. The present work investigates the wear of metallic and polymeric-coated plates in contact with fresh concrete. Two formulations were studied: standard concrete and self-consolidating concrete. A plane-plane tribometer was used to control the fresh concrete friction against the plates. This device reproduces the implementation of concrete in the formwork. Results revealed a Coulomb friction law within the range of tested normal pressures. The friction testing induced changes in the surface topography of the plates. The evolution in topography were associated to two underlying wear mechanisms: a granulate-formwork solid-solid friction and a capillary-dominated friction.},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{elzein:hal-03770517,

title = {Evaluation of internal bleeding in concrete foundation from the Terzaghi's effective stress postulate},

author = {Abdul Rahman El Zein and Yannick Vanhove and Chafika Djelal-Dantec and Olivier Madec and Philippe Gotteland},

url = {https://hal.archives-ouvertes.fr/hal-03770517},

doi = {10.1617/s11527-021-01828-1},

year  = {2021},

date = {2021-12-01},

urldate = {2021-12-01},

journal = {Materials and structures},

volume = {54},

number = {6},

pages = {231},

publisher = {Springer Verlag},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{ajouguim:hal-03228543,

title = {Impact of Alfa fibers morphology on hydration kinetics and mechanical properties of cement mortars},

author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and Mohamed Waqif and Latifa Saadi},

url = {https://hal-univ-artois.archives-ouvertes.fr/hal-03228543},

doi = {10.1016/j.conbuildmat.2021.123514},

year  = {2021},

date = {2021-07-01},

urldate = {2021-07-01},

journal = {Construction and Building Materials},

volume = {293},

pages = {123514},

publisher = {Elsevier},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{vanhove:hal-04440561,

title = {Testing and Modeling of Reinforcement Cage Penetration Capacity from Concrete Rheometer Results},

author = {Yannick Vanhove and Chafika Djelal-Dantec and A. Magnin},

url = {https://univ-artois.hal.science/hal-04440561},

doi = {10.14359/51734153},

year  = {2021},

date = {2021-11-01},

urldate = {2021-11-01},

journal = {Materials Journal},

volume = {118},

number = {6},

publisher = {American Concrete Institute},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{BOUZIADI2020109908,

title = {Finite element modeling of creep behavior of FRP-externally strengthened reinforced concrete beams},

author = {Farid Bouziadi and Bensaid Boulekbache and Abdelkader Haddi and Mostefa Hamrat and Chafika Djelal-Dantec},

url = {http://www.sciencedirect.com/science/article/pii/S0141029618334011},

doi = {https://doi.org/10.1016/j.engstruct.2019.109908},

issn = {0141-0296},

year  = {2020},

date = {2020-01-01},

journal = {Engineering Structures},

volume = {204},

pages = {109908},

abstract = {In this study, a nonlinear numerical analysis is carried out to predict the creep response of reinforced concrete (RC) beams externally strengthened using carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP) laminates. The beams are tested under static four-point bending; the level of sustained service load is equal to 59% of the ultimate capacities of the un-strengthened beams. The Burger rheological model is used to evaluate the flexural creep response (compressive and tensile creep) and then to validate the findings with experimental results. It is shown that the Burger model effectively predicts the creep of CFRP-bonded RC. Furthermore, parametric studies are performed to investigate the effects of: three fiber orientations of CFRP composites (0°, 45° and 90°), the CFRP thickness, and the type of FRP (CFRP and GFRP) on the flexural creep of FRP-externally retrofitted RC beams based on the Burger rheological model. According to the numerical results, a major reduction in creep strain is obtained with the 45° orientation of CFRP. An increase in CFRP-thickness significantly lowers the creep strain. Moreover, the CFRP laminates prove to be more effective than GFRP in improving the creep response.},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{LIBESSART2020117826,

title = {Comparative study of the tribological behaviour of emulsions and demoulding oils at the concrete/formwork interface},

author = {Laurent Libessart and Chafika Djelal-Dantec and Pascale de Caro and Issam Laiymani},

url = {http://www.sciencedirect.com/science/article/pii/S0950061819332799},

doi = {https://doi.org/10.1016/j.conbuildmat.2019.117826},

issn = {0950-0618},

year  = {2020},

date = {2020-01-01},

journal = {Construction and Building Materials},

volume = {239},

pages = {117826},

abstract = {To ensure a performing demoulding, a release agent must resist the friction of concrete on the formwork. Emulsions are interesting alternatives that leads to a reduced consumption of oil on construction sites. The behaviours of two commercial emulsions are compared with two conventional demoulding oils. The adhesion energy calculated were favourable to the emulsions. The water evaporation kinetics leads to the measurements of film thickness. Tests with the tribometer have shown that the films produced from the emulsions generate a friction reduction of 30% and 40% at the concrete/formwork interface. Such performance can be explained by Wenzel's state of wettability, which facilitates the film fit into the formwork roughness.},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Djelalvanhove2020,

title = {Recommendation for concrete mix design to prevent bleed channels on diaphragm walls},

author = {Chafika Djelal-Dantec and Yannick Vanhove and Amin Azzi and Olivier Madec},

url = {https://doi.org/10.1080/19648189.2020.1713900},

doi = {10.1080/19648189.2020.1713900},

year  = {2020},

date = {2020-01-01},

journal = {European Journal of Environmental and Civil Engineering},

volume = {0},

number = {0},

pages = {1-13},

publisher = {Taylor & Francis},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@conference{Page2020a,

title = {Use of biomasse fly ash in cementitious materials},

author = {Jonathan Page and Laurent Libessart and Chafika Djelal-Dantec},

year  = {2020},

date = {2020-01-01},

booktitle = {Advanced Materials for Sustainable Infrastructure Development},

address = {Ventura, USA},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@article{DjelalPage2019,

title = {Feasibility study of using poplar wastes as sand in cement mortars},

author = {Chafika Djelal-Dantec and Jonathan Page and Hassina Kada and Yannick Vanhove},

url = {https://doi.org/10.1007/s10163-019-00946-x},

doi = {10.1007/s10163-019-00946-x},

isbn = {1611-8227},

year  = {2020},

date = {2020-01-01},

journal = {Journal of Material Cycles and Waste Management},

volume = {22},

number = {2},

pages = {488--500},

abstract = {An experimental investigation was undertaken to evaluate the potential use of poplar by-products in cement mortars. Two by-products from poplar processing were studied: sawdust (from sawing wood) and milled fibres (from wood waste obtained during cutting). Poplar fibres and sawdust were incorporated into mortars as sand volume substitution with rates ranging from 0 to 100%. Before introduction into the mortar, poplar aggregates were characterized (morphology and water absorption). It appeared that these wood aggregates absorb very quickly a large amount of water (up to 200%). The introduction of these poplar by-products has significant effects on the composite properties in both fresh and hardened states. It was noted that the workability of the mixtures with the poplar wood varies with the substitution rate. The inhibition of cement setting with poplar sawdust is characterized by maturity tests and affects the mechanical properties of mortars. In addition, increasing the poplar aggregates content causes a continuous increase of the material porosity, which leads to a decrease in density. Besides, it appears that the incorporation of poplar aggregates into mortars also decrease their thermal conductivities, which would help to reduce building heat losses. A significant decrease in the mechanical properties of poplar-based mortars was also noted, related to the rate of fibres or sawdust introduced into mixtures. The hydration disturbances, the high internal porosity of the wood particles and their low density can explain these lower mechanical strengths. However, despite these disturbances, the valorisation of poplar wood by-products remains possible in cementitious materials for the manufacture of concrete masonry blocks.},

note = {ACL},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Djelal2020603,

title = {Experimental study on the valorization of poplar by-products in cement-based materials},

author = {Chafika Djelal-Dantec and Jonathan Page and Yannick Vanhove and Hassina Kada},

url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073687866&doi=10.1007%2f978-981-15-0802-8_95&partnerID=40&md5=e5ecf9b5701fbc076e31c46b5f86e50b},

doi = {10.1007/978-981-15-0802-8_95},

year  = {2020},

date = {2020-01-01},

journal = {Lecture Notes in Civil Engineering},

volume = {54},

pages = {603-608},

note = {cited By 0},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Lahmar2020,

title = {Experimental and finite element analysis of shrinkage of concrete made with recycled coarse aggregates subjected to thermal loading},

author = {Nassira Lahmar and Farid Bouziadi and Bensaid Boulekbache and El-Hadj Meziane and Mostefa Hamrat and Abdelkader Haddi and Chafika Djelal-Dantec},

doi = {10.1016/j.conbuildmat.2020.118564},

year  = {2020},

date = {2020-06-01},

journal = {Construction and Building Materials},

volume = {247},

pages = {118564},

publisher = {Elsevier BV},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Leussa2020,

title = {Pozzolanic activity of kaolins containing aluminum hydroxide},

author = {Claudia Charlotte Tchamo Leussa and Laurent Libessart and Chafika Djelal-Dantec and Chantale Njiomou Djangang and Antoine Elimbi},

doi = {10.1038/s41598-020-70146-3},

year  = {2020},

date = {2020-08-01},

journal = {Scientific Reports},

volume = {10},

number = {1},

publisher = {Springer Science and Business Media LLC},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Page2020b,

title = {Optimisation of vibrocompaction process for wood-based concrete blocks},

author = {Jonathan Page and Chafika Djelal-Dantec and Yannick Vanhove},

doi = {10.1007/s00170-020-05674-3},

year  = {2020},

date = {2020-07-01},

journal = {The International Journal of Advanced Manufacturing Technology},

volume = {109},

number = {3-4},

pages = {1189--1204},

publisher = {Springer Science and Business Media LLC},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Djelal2020b,

title = {Effect of marine environment on the behaviour of concrete structures reinforced by composite materials},

author = {Chafika Djelal-Dantec and Mardy Long and Abdelkader Haddi and Julien Szulc},

doi = {10.1051/meca/2020033},

year  = {2020},

date = {2020-01-01},

journal = {Mechanics & Industry},

volume = {21},

number = {4},

pages = {407},

publisher = {EDP Sciences},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Vanhove2020b,

title = {Influence of rheological properties of concrete foundation on the implementation of continuous flight auger (CFA) piles},

author = {Yannick Vanhove and Chafika Djelal-Dantec},

doi = {10.1617/s11527-020-01556-y},

year  = {2020},

date = {2020-09-01},

journal = {Materials and Structures},

volume = {53},

number = {5},

publisher = {Springer Science and Business Media LLC},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Ajouguim2020,

title = {Investigation on the use of ground alfa fibres as reinforcement of cement mortars},

author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and Mohamed Waqif and Latifa Sa â},

doi = {10.1680/jcoma.20.00001},

year  = {2020},

date = {2020-12-01},

journal = {Proceedings of the Institution of Civil Engineers - Construction Materials},

pages = {1--11},

publisher = {Thomas Telford Ltd.},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@article{Nouri2020,

title = {Quantification of shear strength in reinforced concrete beams using digital image correlation: Experimental and analytical study},

author = {Assia Nouri and Mostefa Hamrat and Bensaid Boulekbache and Said Nouri and Farid Bouziadi and Abderrahim Labed and Abdelkader Haddi and Chafika Djelal-Dantec},

doi = {10.1177/1369433220944510},

year  = {2020},

date = {2020-07-01},

journal = {Advances in Structural Engineering},

volume = {24},

number = {1},

pages = {147--164},

publisher = {SAGE Publications},

keywords = {ER3},

pubstate = {published},

tppubtype = {article}

}

@conference{,

title = {Effect of rheological properties of concrete foundation on the implementation of CFA-Piles},

author = {Yannick Vanhove and Chafika Djelal-Dantec},

year  = {2020},

date = {2020-01-01},

booktitle = {29th Conference on Rheology of Building Materials, OTH- Regensburg, Germany},

note = {COM},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Amzi2019a,

title = {An overview of RILEM TC MRP round-robin testing of concrete and mortar rheology in Bethune France, May 2018},

author = {S Amziane and Chafika Djelal-Dantec and K El-Cheikh and F Fabbris and S Fataei and D Feys and M Greim and I Ivanova and H Keller and K Khayat and Laurent Libessart and V Mechcherine and I Navarette and A Perrot and E Secrieru and M Sonebi and Yannick Vanhove},

year  = {2019},

date = {2019-01-01},

booktitle = {2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concerte (SCC9)},

address = {Dresden, Germany},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Djel2019a,

title = {Creep of reinforced concrete beams under sustained loads: Experiments and numerical modeling approaches},

author = {Chafika Djelal-Dantec and F Bouziadi and B Boulekbache and Abdelkader Haddi and M Hamrat},

year  = {2019},

date = {2019-09-01},

booktitle = {2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concrete (SCC9)},

address = {Dresden, Germany},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Djel2019c,

title = {Experimental study on the valorisation of poplar by products in cement-based materials},

author = {Chafika Djelal-Dantec and Jonathan Page and Yannick Vanhove and Hassina Kada},

year  = {2019},

date = {2019-01-01},

booktitle = {The Fifth International Conference (CIGOS 2019)},

address = {Hanoï, Vietnam},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Agou2019a,

title = {Experimental investigation on the use of alfa fibers as reinforcement of cementitious materials},

author = {Soukaina Ajouguim and Chafika Djelal-Dantec and Jonathan Page and M Waqif and K Abdelouahdi and L Saadi},

year  = {2019},

date = {2019-01-01},

booktitle = {Third International Conference on Bio-Based Building Materials (ICBBM)},

address = {Belfast, United-Kingdom},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Vanh2019a,

title = {Utilisation de 3 rhéomètres à béton pour l’étude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons},

author = {Yannick Vanhove and Elhachemi Agnaou and Chafika Djelal-Dantec},

year  = {2019},

date = {2019-01-01},

booktitle = {Journées Nationales du Bétons, JNB’19},

address = {Hammamet, Tunisie},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Bouz2019,

title = {Analyse du retrait total à long terme du béton à haute résistance contenant des fibres sous différentes températures de cure},

author = {F Bouziadi and B Boulekbache and Abdelkader Haddi and M Hamrat and Chafika Djelal-Dantec and N Lahmar},

year  = {2019},

date = {2019-04-01},

booktitle = {Journées Nationales du Bétons, JNB’19},

address = {Hammamet, Tunisie},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Djel2019b,

title = {Tribologie et phénoménologie des interfaces béton/coffrage},

author = {Chafika Djelal-Dantec and Laurent Libessart and Yannick Vanhove},

year  = {2019},

date = {2019-04-01},

booktitle = {Journées Nationales du Bétons, JNB’19},

address = {Hammamet, Tunisie},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@proceedings{Vanh2019b,

title = {Rheological behavior of concrete foundation during Pile-driving operations},

author = {Yannick Vanhove and Chafika Djelal-Dantec and M Dairou and F Thibaut and P Gotteland},

editor = {RILEM},

isbn = {978-2-35158-230-5},

year  = {2019},

date = {2019-01-01},

booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM Proceedings PRO 132},

address = {Arras, France},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {proceedings}

}

@proceedings{Azzi2018a,

title = {Recommendations on the mix design of concrete foundations for diaphragm walls ; Application to the “Grand Paris” building site},

author = {M -A Azzi and Chafika Djelal-Dantec and Yannick Vanhove and O Madec and P Gotteland},

editor = {RILEM},

isbn = {978-2-35158-230-5},

year  = {2019},

date = {2019-05-01},

booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM Proceedings PRO 132},

address = {Arras, France},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {proceedings}

}

@proceedings{Laiy2019a,

title = {Emulsion effects on the friction on the formwork/concrete interface},

author = {I Laiymani and Laurent Libessart and S Hammouni and Chafika Djelal-Dantec and Yannick Vanhove},

editor = {RILEM},

isbn = {978-2-35158-230-5},

year  = {2019},

date = {2019-05-01},

booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM PRO 132},

address = {Arras},

note = {ACTI},

keywords = {ER3},

pubstate = {published},

tppubtype = {proceedings}

}

@conference{Libe2019b,

title = {Influence des émulsions sur le frottement du béton},

author = {Laurent Libessart and Issam Laiymani and Chafika Djelal-Dantec and Yannick Vanhove},

year  = {2019},

date = {2019-06-01},

booktitle = {37èmes Rencontres Universitaires de Génie Civil},

address = {Nice},

note = {ACTN},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Ajou2019b,

title = {Formulation d’un composite cimentaire incorporant des fibres d’alfa : Influence de la longueur et du taux de fibres},

author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and L Saadi},

year  = {2019},

date = {2019-06-01},

booktitle = {37èmes Rencontres Universitaires de Génie Civil},

address = {Nice},

note = {ACTN},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}

@conference{Vanh2019bb,

title = {Rheological properties of concrete foundations},

author = {Yannick Vanhove and Chafika Djelal-Dantec},

year  = {2019},

date = {2019-01-01},

booktitle = {One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune)},

address = {Paris},

note = {COM},

keywords = {ER3},

pubstate = {published},

tppubtype = {conference}

}