2024Book Section ER3 Auteurs : Yannick,; Djelal-Dantec, Chafika; Proske, Tilo State of Knowledge of Interface Rheometers and Tribometers In: Measuring Rheological Properties of Cement-based Materials, vol. 39, pp. 181-192, 2024, (DO). Links @incollection{vanhove:hal-04636072,
title = {State of Knowledge of Interface Rheometers and Tribometers},
author = {Yannick and Chafika Djelal-Dantec and Tilo Proske},
url = {https://hal.science/hal-04636072},
doi = {10.1007/978-3-031-36743-4_7},
year = {2024},
date = {2024-10-01},
urldate = {2024-10-01},
booktitle = {Measuring Rheological Properties of Cement-based Materials},
volume = {39},
pages = {181-192},
series = {RILEM State-of-the-Art Reports},
note = {DO},
keywords = {ER3},
pubstate = {published},
tppubtype = {incollection}
}
|
2024Journal Article ER3 Auteurs : Schlupp, Florian; Page, Jonathan; Djelal, Chafika; Libessart, Laurent Use of Biomass Bottom Ash as an Alternative Solution to Natural Aggregates in Concrete Applications: A Review In: Materials, vol. 17, no. 18, pp. 4504, 2024, (ACL). Links @article{schlupp:hal-04698807,
title = {Use of Biomass Bottom Ash as an Alternative Solution to Natural Aggregates in Concrete Applications: A Review},
author = {Florian Schlupp and Jonathan Page and Chafika Djelal and Laurent Libessart},
url = {https://hal.science/hal-04698807},
doi = {10.3390/ma17184504},
year = {2024},
date = {2024-09-01},
urldate = {2024-09-01},
journal = {Materials},
volume = {17},
number = {18},
pages = {4504},
publisher = {MDPI},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2024Book Section ER3 Auteurs : Belguith, Rami; Bataille, Alain Plastic Additive Manufacturing Versus Circular Economy In: Proceedings of the 2nd International Conference on Innovative Materials, Manufacturing, and Advanced Technologies, vol. 144, pp. 1-11, Springer Nature Switzerland, 2024, (ACTI). Links @incollection{belguith:hal-04256155,
title = {Plastic Additive Manufacturing Versus Circular Economy},
author = {Rami Belguith and Alain Bataille},
url = {https://univ-artois.hal.science/hal-04256155},
doi = {10.1007/978-3-031-42659-9_1},
year = {2024},
date = {2024-09-01},
urldate = {2024-09-01},
booktitle = {Proceedings of the 2nd International Conference on Innovative Materials, Manufacturing, and Advanced Technologies},
volume = {144},
pages = {1-11},
publisher = {Springer Nature Switzerland},
series = {Mechanisms and Machine Science},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {incollection}
}
|
2024Proceedings ER3 Auteurs : Belguith, Rami; Baili, Maher; Sai, Lotfi; Dessein, Gilles; Saï, Wassila Bouzid Analysis of the Surface Topography Defects in 3 Axis Ball End Milling Springer Nature Switzerland, vol. 144, 2024, (ACTI). Links @proceedings{belguith:hal-04256159,
title = {Analysis of the Surface Topography Defects in 3 Axis Ball End Milling},
author = {Rami Belguith and Maher Baili and Lotfi Sai and Gilles Dessein and Wassila Bouzid Saï},
url = {https://univ-artois.hal.science/hal-04256159},
doi = {10.1007/978-3-031-42659-9_21},
year = {2024},
date = {2024-09-01},
urldate = {2024-09-01},
booktitle = {2nd International Conference on Innovative Materials, Manufacturing, and Advanced Technologies},
volume = {144},
pages = {187-194},
publisher = {Springer Nature Switzerland},
series = {Mechanisms and Machine Science},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2024Proceedings ER3 Auteurs : Essid, Mohamed; Sbaa, Rania; Belguith, Rami; Baili, Maher; Gassara, Bassem; Hbaieb, Moncef; Dessein, Gilles; Saï, Wassila Bouzid Effect of the Interpolation Mode on the Tool Path Accuracy in HSM Springer Nature Switzerland, vol. 144, 2024, (ACTI). Links @proceedings{essid:hal-04256169,
title = {Effect of the Interpolation Mode on the Tool Path Accuracy in HSM},
author = {Mohamed Essid and Rania Sbaa and Rami Belguith and Maher Baili and Bassem Gassara and Moncef Hbaieb and Gilles Dessein and Wassila Bouzid Saï},
url = {https://univ-artois.hal.science/hal-04256169},
doi = {10.1007/978-3-031-42659-9_28},
year = {2024},
date = {2024-09-01},
urldate = {2024-09-01},
booktitle = {IMMAT 2022},
volume = {144},
pages = {250-258},
publisher = {Springer Nature Switzerland},
series = {Mechanisms and Machine Science},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2024Proceedings ER3 Auteurs : Regaieg, Amine; Belguith, Rami; Sai, Lotfi; Saï, Wassila Bouzid A New Approach to Investigate the Formation Mechanism of the Not Modelable Cusps in 3-Axis Ball End Milling Springer Nature Switzerland, vol. 144, 2024, (ACL). Links @proceedings{regaieg:hal-04256162,
title = {A New Approach to Investigate the Formation Mechanism of the Not Modelable Cusps in 3-Axis Ball End Milling},
author = {Amine Regaieg and Rami Belguith and Lotfi Sai and Wassila Bouzid Saï},
url = {https://univ-artois.hal.science/hal-04256162},
doi = {10.1007/978-3-031-42659-9_27},
year = {2024},
date = {2024-09-01},
urldate = {2024-09-01},
booktitle = {IMMAT 2022},
volume = {144},
pages = {241-249},
publisher = {Springer Nature Switzerland},
series = {Mechanisms and Machine Science},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2024Journal Article ER3 Auteurs : Regaieg, Amine; Belguith, Rami; Sai, Lotfi Enhanced modeling of instantaneous uncut chip thickness and cutter workpiece engagement region in 5 axis ball end milling: Case of the tilt orientation In: Journal of Manufacturing Processes, vol. 121, pp. 289-311, 2024, (ACL). Links @article{regaieg:hal-04598036,
title = {Enhanced modeling of instantaneous uncut chip thickness and cutter workpiece engagement region in 5 axis ball end milling: Case of the tilt orientation},
author = {Amine Regaieg and Rami Belguith and Lotfi Sai},
url = {https://univ-artois.hal.science/hal-04598036},
doi = {10.1016/j.jmapro.2024.05.045},
year = {2024},
date = {2024-07-01},
urldate = {2024-07-01},
journal = {Journal of Manufacturing Processes},
volume = {121},
pages = {289-311},
publisher = {Society of Manufacturing Engineers},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2024Journal Article ER3 Auteurs : Hernández, Maribel; Ambriz, R. R.; Amrouche, Abdelwaheb; Jaramillo, D. Mechanical behavior of dissimilar AL6XN-IN718 welded joint obtained by cold metal transfer In: Journal of Materials Research and Technology, vol. 30, pp. 7384-7397, 2024, (ACL). Links @article{hernandez:hal-04633813,
title = {Mechanical behavior of dissimilar AL6XN-IN718 welded joint obtained by cold metal transfer},
author = {Maribel Hernández and R. R. Ambriz and Abdelwaheb Amrouche and D. Jaramillo},
url = {https://hal.science/hal-04633813},
doi = {10.1016/j.jmrt.2024.05.101},
year = {2024},
date = {2024-05-01},
urldate = {2024-05-01},
journal = {Journal of Materials Research and Technology},
volume = {30},
pages = {7384-7397},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2024Journal Article ER3 Auteurs : Talibi, Soukayna; Page, Jonathan; Djelal-Dantec, Chafika; Saâdi, Latifa Impact of treated red-algae fibers on physico-mechanical behavior of compressed earth bricks for construction In: European Journal of Environmental and Civil Engineering, pp. 1-34, 2024, (ACL). Links @article{talibi:hal-04522718,
title = {Impact of treated red-algae fibers on physico-mechanical behavior of compressed earth bricks for construction},
author = {Soukayna Talibi and Jonathan Page and Chafika Djelal-Dantec and Latifa Saâdi},
url = {https://hal.science/hal-04522718},
doi = {10.1080/19648189.2024.2329722},
year = {2024},
date = {2024-03-01},
urldate = {2024-03-01},
journal = {European Journal of Environmental and Civil Engineering},
pages = {1-34},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2024Journal Article ER3 Auteurs : Kleib, Joelle; Lesueur, D.; Maherzi, Walid; Benzerzour, Mahfoud Carbonation of a lime treated soil subjected to different curing conditions In: Transportation Geotechnics, vol. 44, pp. 101174, 2024, (ACL). Links @article{kleib:hal-04495195,
title = {Carbonation of a lime treated soil subjected to different curing conditions},
author = {Joelle Kleib and D. Lesueur and Walid Maherzi and Mahfoud Benzerzour},
url = {https://hal.science/hal-04495195},
doi = {10.1016/j.trgeo.2023.101174},
year = {2024},
date = {2024-01-01},
urldate = {2024-01-01},
journal = {Transportation Geotechnics},
volume = {44},
pages = {101174},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2024Journal Article ER3 Auteurs : Chekalil, I.; Chadli, R.; Ghazi, A.; Miloudi, A.; Planche, M. P.; Amrouche, Abdelwaheb Corrosion behavior of AA3003 friction stir welded joints In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 680, pp. 132673, 2024, (ACL). Links @article{chekalil:hal-04638237,
title = {Corrosion behavior of AA3003 friction stir welded joints},
author = {I. Chekalil and R. Chadli and A. Ghazi and A. Miloudi and M. P. Planche and Abdelwaheb Amrouche},
url = {https://hal.science/hal-04638237},
doi = {10.1016/j.colsurfa.2023.132673},
year = {2024},
date = {2024-01-01},
urldate = {2024-01-01},
journal = {Colloids and Surfaces A: Physicochemical and Engineering Aspects},
volume = {680},
pages = {132673},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Schlupp, Florian; Page, Jonathan; Djelal-Dantec, Chafika; Libessart, Laurent Influence of recycled sand from biomass combustion on the mechanical, hydration and porous properties of mortar mixtures In: Construction and Building Materials, vol. 404, pp. 133193, 2023, (ACL). Links @article{schlupp:hal-04285039,
title = {Influence of recycled sand from biomass combustion on the mechanical, hydration and porous properties of mortar mixtures},
author = {Florian Schlupp and Jonathan Page and Chafika Djelal-Dantec and Laurent Libessart},
url = {https://hal.science/hal-04285039},
doi = {10.1016/j.conbuildmat.2023.133193},
year = {2023},
date = {2023-11-01},
urldate = {2023-11-01},
journal = {Construction and Building Materials},
volume = {404},
pages = {133193},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Book Section ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Libessart, Laurent; Tilo, Proske; Secrieru, Egor; Feys, Dimitri State of knowledge of interface rheometry In: Measuring rheological properties of cement-based materials, Report of RILEM Technical committee 266 MRP, pp. Chapitre 7, 2023, (OS). Links @incollection{vanhove:hal-04356443,
title = {State of knowledge of interface rheometry},
author = {Yannick Vanhove and Chafika Djelal-Dantec and Laurent Libessart and Proske Tilo and Egor Secrieru and Dimitri Feys},
url = {https://univ-artois.hal.science/hal-04356443},
year = {2023},
date = {2023-10-01},
urldate = {2023-10-01},
booktitle = {Measuring rheological properties of cement-based materials, Report of RILEM Technical committee 266 MRP},
pages = {Chapitre 7},
note = {OS},
keywords = {ER3},
pubstate = {published},
tppubtype = {incollection}
}
|
2023Journal Article ER3 Auteurs : Schlupp, Florian; Page, Jonathan; Djelal-Dantec, Chafika; Libessart, Laurent Use of biomass bottom ash as granular substitute in mortar In: Journal of Building Engineering, vol. 75, pp. 106927, 2023, (ACL). Links @article{schlupp:hal-04136678,
title = {Use of biomass bottom ash as granular substitute in mortar},
author = {Florian Schlupp and Jonathan Page and Chafika Djelal-Dantec and Laurent Libessart},
url = {https://hal.science/hal-04136678},
doi = {10.1016/j.jobe.2023.106927},
year = {2023},
date = {2023-09-01},
urldate = {2023-09-01},
journal = {Journal of Building Engineering},
volume = {75},
pages = {106927},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Leussa, Claudia Charlotte Tchamo; Djangang, Chantale Njiomou; Libessart, Laurent; E., Tiffo; Djelal-Dantec, Chafika; Elimbi, Antoine Pozzolanic activity of kaolinite material rich in gibbsite calcined at low temperature and its effect on physical and mechanical properties of Portland cement mortars In: Journal of Materials and Environmental Science , vol. 14, no. 9, pp. 1096-1108, 2023, (ACL). Links @article{leussa:hal-04267485,
title = {Pozzolanic activity of kaolinite material rich in gibbsite calcined at low temperature and its effect on physical and mechanical properties of Portland cement mortars},
author = {Claudia Charlotte Tchamo Leussa and Chantale Njiomou Djangang and Laurent Libessart and Tiffo E. and Chafika Djelal-Dantec and Antoine Elimbi},
url = {https://univ-artois.hal.science/hal-04267485},
year = {2023},
date = {2023-09-01},
urldate = {2023-09-01},
journal = {Journal of Materials and Environmental Science },
volume = {14},
number = {9},
pages = {1096-1108},
publisher = {Mohammed Premier University},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal-Dantec, Chafika; Saâdi, Latifa Effect of treated Alfa fibers on hydration kinetics, mechanical, and adhesion properties of fiber cement composite In: Journal of Building Engineering, vol. 71, pp. 106558, 2023, (ACL). Links @article{ajouguim:hal-04136684,
title = {Effect of treated Alfa fibers on hydration kinetics, mechanical, and adhesion properties of fiber cement composite},
author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and Latifa Saâdi},
url = {https://hal.science/hal-04136684},
doi = {10.1016/j.jobe.2023.106558},
year = {2023},
date = {2023-07-01},
urldate = {2023-07-01},
journal = {Journal of Building Engineering},
volume = {71},
pages = {106558},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Feys, Dimitri; Keller, Helena; Cheikh, Khadija El; Secrieru, Egor; Vanhove, Yannick RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-a comprehensive flow curve analysis In: Materials and structures, vol. 56, no. 5, pp. 105, 2023, (ACL). Links @article{feys:hal-04136669,
title = {RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-a comprehensive flow curve analysis},
author = {Dimitri Feys and Helena Keller and Khadija El Cheikh and Egor Secrieru and Yannick Vanhove},
url = {https://hal.science/hal-04136669},
doi = {10.1617/s11527-023-02176-y},
year = {2023},
date = {2023-06-01},
urldate = {2023-06-01},
journal = {Materials and structures},
volume = {56},
number = {5},
pages = {105},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Bouziadi, Farid; Haddi, Abdelkader; Tahenni, Touhami; Boulekbache, Bensaid; Hamrat, Mostefa; Naser, Mz; Amziane, Sofiane Development of a local bond shear stress-slip model of RC beams externally strengthened with FRP materials In: Journal of Composite Materials, vol. 57, no. 14, pp. 2261-2285, 2023, (ACL). Links @article{bouziadi:hal-04136740,
title = {Development of a local bond shear stress-slip model of RC beams externally strengthened with FRP materials},
author = {Farid Bouziadi and Abdelkader Haddi and Touhami Tahenni and Bensaid Boulekbache and Mostefa Hamrat and Mz Naser and Sofiane Amziane},
url = {https://hal.science/hal-04136740},
doi = {10.1177/00219983231170047},
year = {2023},
date = {2023-06-01},
urldate = {2023-06-01},
journal = {Journal of Composite Materials},
volume = {57},
number = {14},
pages = {2261-2285},
publisher = {SAGE Publications},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Feys, Dimitri; Sonebi, Mohammed; Amziane, Sofiane; Djelal-Dantec, Chafika; El-Cheikh, Khadija; Fataei, Shirin; Greim, Markus; Ivanova, Irina; Keller, Helena; Khayat, Kamal; Vanhove, Yannick; Libessart, Laurent; Mechtcherine, Viktor; Navarrete, Ivan; Perrot, Arnaud; Secrieru, Egor RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-rheometers, mixtures and procedures In: Materials and structures, vol. 56, no. 4, pp. 90, 2023, (ACL). Links @article{feys:hal-04136704,
title = {RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-rheometers, mixtures and procedures},
author = {Dimitri Feys and Mohammed Sonebi and Sofiane Amziane and Chafika Djelal-Dantec and Khadija El-Cheikh and Shirin Fataei and Markus Greim and Irina Ivanova and Helena Keller and Kamal Khayat and Yannick Vanhove and Laurent Libessart and Viktor Mechtcherine and Ivan Navarrete and Arnaud Perrot and Egor Secrieru},
url = {https://hal.science/hal-04136704},
doi = {10.1617/s11527-023-02173-1},
year = {2023},
date = {2023-05-01},
urldate = {2023-05-01},
journal = {Materials and structures},
volume = {56},
number = {4},
pages = {90},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Nadour, Younes; Bouziadi, Farid; Hamrat, Mostefa; Boulekbache, Bensaid; Amziane, Sofiane; Haddi, Abdelkader; Labed, Abderrahim Short- and long-term properties of self-compacting concrete containing recycled coarse aggregate under different curing temperatures: experimental and numerical study In: Materials and structures, vol. 56, no. 4, pp. 83, 2023, (ACL). Links @article{nadour:hal-04136749,
title = {Short- and long-term properties of self-compacting concrete containing recycled coarse aggregate under different curing temperatures: experimental and numerical study},
author = {Younes Nadour and Farid Bouziadi and Mostefa Hamrat and Bensaid Boulekbache and Sofiane Amziane and Abdelkader Haddi and Abderrahim Labed},
url = {https://hal.science/hal-04136749},
doi = {10.1617/s11527-023-02168-y},
year = {2023},
date = {2023-05-01},
urldate = {2023-05-01},
journal = {Materials and structures},
volume = {56},
number = {4},
pages = {83},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Libessart, Laurent; Anceur, R.; Djelal-Dantec, Chafika; Aljawish, A.; Millares, M. Synthesis and characterization of release agent from used cooking oil at the concrete/formwork interface In: International Journal of Environmental Science and Technology, 2023, (ACL). Links @article{libessart:hal-04072397,
title = {Synthesis and characterization of release agent from used cooking oil at the concrete/formwork interface},
author = {Laurent Libessart and R. Anceur and Chafika Djelal-Dantec and A. Aljawish and M. Millares},
url = {https://hal.science/hal-04072397},
doi = {10.1007/s13762-023-04918-5},
year = {2023},
date = {2023-04-01},
urldate = {2023-04-01},
journal = {International Journal of Environmental Science and Technology},
publisher = {Springer},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Libessart, Laurent; Anceur, R.; Djelal-Dantec, Chafika; Aljawish, A.; Millares, M. Synthesis and characterization of release agent from used cooking oil at the concrete/formwork interface In: International Journal of Environmental Science and Technology, 2023, (ACL). Links @article{libessart:hal-04072397b,
title = {Synthesis and characterization of release agent from used cooking oil at the concrete/formwork interface},
author = {Laurent Libessart and R. Anceur and Chafika Djelal-Dantec and A. Aljawish and M. Millares},
url = {https://hal.science/hal-04072397},
doi = {10.1007/s13762-023-04918-5},
year = {2023},
date = {2023-04-01},
urldate = {2023-04-01},
journal = {International Journal of Environmental Science and Technology},
publisher = {Springer},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Chenaifi, Khalil; Benabid, Yacine; Messellek, Ali Cherif; Ouali, Mohand Ould; Amrouche, A. Preventing the increase in the risk of bone failure in osteoporotic cervical spine vertebra with a novel computational approach In: Journal of Mechanics in Medicine and Biology, vol. 23, no. 03, 2023, (ACL). Links @article{chenaifi:hal-04136754,
title = {Preventing the increase in the risk of bone failure in osteoporotic cervical spine vertebra with a novel computational approach},
author = {Khalil Chenaifi and Yacine Benabid and Ali Cherif Messellek and Mohand Ould Ouali and A. Amrouche},
url = {https://hal.science/hal-04136754},
doi = {10.1142/S0219519423500203},
year = {2023},
date = {2023-04-01},
urldate = {2023-04-01},
journal = {Journal of Mechanics in Medicine and Biology},
volume = {23},
number = {03},
publisher = {World Scientific Publishing},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Talibi, Soukayna; Page, Jonathan; Djelal-Dantec, Chafika; Waqif, Mohamed; Saâdi, Latifa Study of earth-based materials for manufacturing compaction process In: Journal of Building Engineering, vol. 64, no. 6, pp. 105546, 2023, (ACL). Links @article{talibi:hal-04136770,
title = {Study of earth-based materials for manufacturing compaction process},
author = {Soukayna Talibi and Jonathan Page and Chafika Djelal-Dantec and Mohamed Waqif and Latifa Saâdi},
url = {https://hal.science/hal-04136770},
doi = {10.1016/j.jobe.2022.105546},
year = {2023},
date = {2023-04-01},
urldate = {2023-04-01},
journal = {Journal of Building Engineering},
volume = {64},
number = {6},
pages = {105546},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Book Section ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Kim, J. H; Tilo, Proske Formwork technology, interface conditions and friction behaviour In: Measuring rheological properties of cement-based materials, pp. Chapitre 5, 2023, (OS). Links @incollection{vanhove:hal-04356419,
title = {Formwork technology, interface conditions and friction behaviour},
author = {Yannick Vanhove and Chafika Djelal-Dantec and J. H Kim and Proske Tilo},
url = {https://univ-artois.hal.science/hal-04356419},
year = {2023},
date = {2023-01-01},
urldate = {2023-01-01},
booktitle = {Measuring rheological properties of cement-based materials},
pages = {Chapitre 5},
note = {OS},
keywords = {ER3},
pubstate = {published},
tppubtype = {incollection}
}
|
2022Proceedings Article ER3 Auteurs : Schlupp, Florian; Page, Jonathan; Djelal-Dantec, Chafika; Libessart, Laurent Effet de la combustion sur les cendres sous foyer de biomasse - Valorisation en tant que sable dans un mortier In: NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité, IMT Mines Al`es and LMGC and LIFAM Montpellier, France, 2022, (ACTI). Links @inproceedings{schlupp:hal-03881451,
title = {Effet de la combustion sur les cendres sous foyer de biomasse - Valorisation en tant que sable dans un mortier},
author = {Florian Schlupp and Jonathan Page and Chafika Djelal-Dantec and Laurent Libessart},
url = {https://hal.archives-ouvertes.fr/hal-03881451},
year = {2022},
date = {2022-11-01},
urldate = {2022-11-01},
booktitle = {NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité},
address = {Montpellier, France},
organization = {IMT Mines Al`es and LMGC and LIFAM},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2022Journal Article ER3 Auteurs : Page, Jonathan; Khadraoui, Fouzia; Gomina, Moussa; Boutouil, Mohamed Hydration of flax fibre-reinforced cementitious composites: influence of fibre surface treatments In: European Journal of Environmental and Civil Engineering, vol. 26, no. 12, pp. 5798-5820, 2022, (ACL). Links @article{page:hal-03770077,
title = {Hydration of flax fibre-reinforced cementitious composites: influence of fibre surface treatments},
author = {Jonathan Page and Fouzia Khadraoui and Moussa Gomina and Mohamed Boutouil},
url = {https://hal.archives-ouvertes.fr/hal-03770077},
doi = {10.1080/19648189.2021.1918260},
year = {2022},
date = {2022-09-01},
urldate = {2022-09-01},
journal = {European Journal of Environmental and Civil Engineering},
volume = {26},
number = {12},
pages = {5798-5820},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Journal Article ER3 Auteurs : Abdallah, Amani-Adra; Kada, Hassina; Amrouche, Abdelwaheb Mechanical and thermo-physical characterization of mortars made with uncontaminated marine sediments In: Journal of Material Cycles and Waste Management, 2022, (ACL). Links @article{abdallah:hal-03784499,
title = {Mechanical and thermo-physical characterization of mortars made with uncontaminated marine sediments},
author = {Amani-Adra Abdallah and Hassina Kada and Abdelwaheb Amrouche},
url = {https://hal.archives-ouvertes.fr/hal-03784499},
doi = {10.1007/s10163-022-01497-4},
year = {2022},
date = {2022-08-01},
urldate = {2022-08-01},
journal = {Journal of Material Cycles and Waste Management},
publisher = {Springer Verlag (Germany)},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Journal Article ER3 Auteurs : Mazian, Brahim; Wirquin, Eric; Aguibi, Kawther; Martin, Patrick; Chaveriat, Ludovic; Dubois, Vincent Effect of mixing conditions on the density, morphology, thermal and mechanical properties of mineral foam In: Journal of Building Engineering, vol. 52, pp. 104410, 2022, (ACL). Links @article{mazian:hal-03697703b,
title = {Effect of mixing conditions on the density, morphology, thermal and mechanical properties of mineral foam},
author = {Brahim Mazian and Eric Wirquin and Kawther Aguibi and Patrick Martin and Ludovic Chaveriat and Vincent Dubois},
url = {https://hal-univ-artois.archives-ouvertes.fr/hal-03697703},
doi = {10.1016/j.jobe.2022.104410},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Journal of Building Engineering},
volume = {52},
pages = {104410},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Journal Article ER3 Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Tahenni, Touhami; Haddi, Abdelkader; Hamrat, Mostefa; Amziane, Sofiane Finite element analysis of steady-state uniaxial basic creep of high-performance concrete In: Journal of Building Engineering, vol. 52, pp. 104500, 2022, (ACL). Links @article{bouziadi:hal-03650031,
title = {Finite element analysis of steady-state uniaxial basic creep of high-performance concrete},
author = {Farid Bouziadi and Bensaid Boulekbache and Touhami Tahenni and Abdelkader Haddi and Mostefa Hamrat and Sofiane Amziane},
url = {https://hal.archives-ouvertes.fr/hal-03650031},
doi = {10.1016/j.jobe.2022.104500},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Journal of Building Engineering},
volume = {52},
pages = {104500},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Journal Article ER3 Auteurs : Engone, Jean Gérard Ndong; Moumen, Ahmed El; Djelal-Dantec, Chafika; Imad, Abdellatif; Kanit, Toufik; Page, Jonathan Evaluation of Effective Elastic Properties for Wood--Cement Composites: Experimental and Computational Investigations In: Sustainability, vol. 14, no. 14, pp. 8638, 2022, (ACL). Links @article{ndongengone:hal-03766721b,
title = {Evaluation of Effective Elastic Properties for Wood--Cement Composites: Experimental and Computational Investigations},
author = {Jean Gérard Ndong Engone and Ahmed El Moumen and Chafika Djelal-Dantec and Abdellatif Imad and Toufik Kanit and Jonathan Page},
url = {https://hal.science/hal-03766721},
doi = {10.3390/su14148638},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Sustainability},
volume = {14},
number = {14},
pages = {8638},
publisher = {MDPI},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Journal Article ER3 Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Tahenni, Touhami; Haddi, Abdelkader; Hamrat, Mostefa; Amziane, Sofiane Finite element analysis of steady-state uniaxial basic creep of high-performance concrete In: Journal of Building Engineering, vol. 52, pp. 104500, 2022, (ACL). Links @article{bouziadi:hal-03650031b,
title = {Finite element analysis of steady-state uniaxial basic creep of high-performance concrete},
author = {Farid Bouziadi and Bensaid Boulekbache and Touhami Tahenni and Abdelkader Haddi and Mostefa Hamrat and Sofiane Amziane},
url = {https://hal.science/hal-03650031},
doi = {10.1016/j.jobe.2022.104500},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Journal of Building Engineering},
volume = {52},
pages = {104500},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Journal Article ER3 Auteurs : Engone, Jean Gérard Ndong; Moumen, Ahmed El; Djelal-Dantec, Chafika; Imad, Abdellatif; Kanit, Toufik; Page, Jonathan Evaluation of Effective Elastic Properties for Wood--Cement Composites: Experimental and Computational Investigations In: Sustainability, vol. 14, no. 14, pp. 8638, 2022, (ACL). Links @article{ndongengone:hal-03766721,
title = {Evaluation of Effective Elastic Properties for Wood--Cement Composites: Experimental and Computational Investigations},
author = {Jean Gérard Ndong Engone and Ahmed El Moumen and Chafika Djelal-Dantec and Abdellatif Imad and Toufik Kanit and Jonathan Page},
url = {https://hal.archives-ouvertes.fr/hal-03766721},
doi = {10.3390/su14148638},
year = {2022},
date = {2022-07-01},
urldate = {2022-07-01},
journal = {Sustainability},
volume = {14},
number = {14},
pages = {8638},
publisher = {MDPI},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Journal Article ER3 Auteurs : Abdallah, Amani; Kada, Hassina; Amrouche, Abdelwaheb Thermo-physical characterization of mortars made with uncontaminated marine sediments In: Academic Journal of Civil Engineering, vol. 40, no. 1, pp. 194-198, 2022, (ACL). Links @article{abdallah_Kada_Amrouche_2022,
title = {Thermo-physical characterization of mortars made with uncontaminated marine sediments},
author = {Amani Abdallah and Hassina Kada and Abdelwaheb Amrouche},
url = {https://journal.augc.asso.fr/index.php/ajce/article/view/3107},
doi = {10.26168/ajce.40.1.48},
year = {2022},
date = {2022-06-01},
urldate = {2022-06-01},
journal = {Academic Journal of Civil Engineering},
volume = {40},
number = {1},
pages = {194-198},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Conference ER3 Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Haddi, Abdelkader Total creep of RC beam subjected to sustained loads: Experiment and numerical medeling approach 2022, (COM). Abstract | Links @conference{bouziadi:hal-03650050,
title = {Total creep of RC beam subjected to sustained loads: Experiment and numerical medeling approach},
author = {Farid Bouziadi and Bensaid Boulekbache and Abdelkader Haddi},
url = {https://hal.archives-ouvertes.fr/hal-03650050},
year = {2022},
date = {2022-03-01},
urldate = {2022-03-01},
abstract = {1st seminar international New trends on innovative construction materials, Tlemcen, Algeria},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
1st seminar international New trends on innovative construction materials, Tlemcen, Algeria |
2022Journal Article ER3 Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal-Dantec, Chafika; Waqif, Mohamed; Saadi, Latifa Performance of Alfa fibres in cementitious materials exposed to diverse surface treatments In: Construction Technologies and Architecture, vol. 1, pp. 660-667, 2022, (ACL). Links @article{ajouguim:hal-03522400b,
title = {Performance of Alfa fibres in cementitious materials exposed to diverse surface treatments},
author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and Mohamed Waqif and Latifa Saadi},
url = {https://hal.science/hal-03522400},
doi = {10.4028/www.scientific.net/CTA.1.660},
year = {2022},
date = {2022-01-01},
urldate = {2022-01-01},
journal = {Construction Technologies and Architecture},
volume = {1},
pages = {660-667},
publisher = {copyrightTrans Tech Publications Ltd, Switzerland},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2022Journal Article ER3 Auteurs : Talouti, S.; Benzerga, D.; Haddi, Abdelkader Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface In: International Journal of Engineering, vol. 35, no. 12, pp. 2337-2343, 2022, (ACL). Links @article{talouti:hal-04136785,
title = {Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface},
author = {S. Talouti and D. Benzerga and Abdelkader Haddi},
url = {https://hal.science/hal-04136785},
doi = {10.5829/ije.2022.35.12c.09},
year = {2022},
date = {2022-01-01},
urldate = {2022-01-01},
journal = {International Journal of Engineering},
volume = {35},
number = {12},
pages = {2337-2343},
publisher = {Materials and Energy Research Center},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Zein, Abdul Rahman El; Vanhove, Yannick; Djelal-Dantec, Chafika; Madec, Olivier; Gotteland, Philippe Evaluation of internal bleeding in concrete foundation from the Terzaghi's effective stress postulate In: Materials and structures, vol. 54, no. 6, pp. 231, 2021, (ACL). Links @article{elzein:hal-03770517,
title = {Evaluation of internal bleeding in concrete foundation from the Terzaghi's effective stress postulate},
author = {Abdul Rahman El Zein and Yannick Vanhove and Chafika Djelal-Dantec and Olivier Madec and Philippe Gotteland},
url = {https://hal.archives-ouvertes.fr/hal-03770517},
doi = {10.1617/s11527-021-01828-1},
year = {2021},
date = {2021-12-01},
urldate = {2021-12-01},
journal = {Materials and structures},
volume = {54},
number = {6},
pages = {231},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Magnin, A. Testing and Modeling of Reinforcement Cage Penetration Capacity from Concrete Rheometer Results In: Materials Journal, vol. 118, no. 6, 2021, (ACL). Links @article{vanhove:hal-04440561,
title = {Testing and Modeling of Reinforcement Cage Penetration Capacity from Concrete Rheometer Results},
author = {Yannick Vanhove and Chafika Djelal-Dantec and A. Magnin},
url = {https://univ-artois.hal.science/hal-04440561},
doi = {10.14359/51734153},
year = {2021},
date = {2021-11-01},
urldate = {2021-11-01},
journal = {Materials Journal},
volume = {118},
number = {6},
publisher = {American Concrete Institute},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article Auteurs : Abdallah, Wafaa; SbartaÏ, Zoubir-Mehdi; Saliba, Jacqueline; Elachachi, Sidi Mohammed; Chehade, Fadi Hage; Sadek, Marwan Assessment of the reliability of concrete evaluation by multi-physical inversion of NDT measurements - A probabilistic approach In: Construction and Building Materials, vol. 300, pp. 124371, 2021, (ACL). Links @article{abdallah:hal-03482897,
title = {Assessment of the reliability of concrete evaluation by multi-physical inversion of NDT measurements - A probabilistic approach},
author = {Wafaa Abdallah and Zoubir-Mehdi SbartaÏ and Jacqueline Saliba and Sidi Mohammed Elachachi and Fadi Hage Chehade and Marwan Sadek},
url = {https://hal.archives-ouvertes.fr/hal-03482897},
doi = {10.1016/j.conbuildmat.2021.124371},
year = {2021},
date = {2021-09-01},
urldate = {2021-09-01},
journal = {Construction and Building Materials},
volume = {300},
pages = {124371},
publisher = {Elsevier},
note = {ACL},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Page, Jonathan; Khadraoui, Fouzia; Gomina, Moussa; Boutouil, Mohamed Enhancement of the long-term mechanical performance of flax fiber-reinforced cementitious composites by using alternative binders In: Journal of Building Engineering, vol. 40, pp. 102323, 2021, (ACL). Links @article{page:hal-03770498,
title = {Enhancement of the long-term mechanical performance of flax fiber-reinforced cementitious composites by using alternative binders},
author = {Jonathan Page and Fouzia Khadraoui and Moussa Gomina and Mohamed Boutouil},
url = {https://hal.archives-ouvertes.fr/hal-03770498},
doi = {10.1016/j.jobe.2021.102323},
year = {2021},
date = {2021-08-01},
urldate = {2021-08-01},
journal = {Journal of Building Engineering},
volume = {40},
pages = {102323},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal-Dantec, Chafika; Waqif, Mohamed; Saadi, Latifa Impact of Alfa fibers morphology on hydration kinetics and mechanical properties of cement mortars In: Construction and Building Materials, vol. 293, pp. 123514, 2021, (ACL). Links @article{ajouguim:hal-03228543,
title = {Impact of Alfa fibers morphology on hydration kinetics and mechanical properties of cement mortars},
author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and Mohamed Waqif and Latifa Saadi},
url = {https://hal-univ-artois.archives-ouvertes.fr/hal-03228543},
doi = {10.1016/j.conbuildmat.2021.123514},
year = {2021},
date = {2021-07-01},
urldate = {2021-07-01},
journal = {Construction and Building Materials},
volume = {293},
pages = {123514},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Conference ER3 Auteurs : Abdallah, Amani-Adra; Kada, Hassina; Kanit, Toufik; Amrouche, Abdelwaheb Determination of the mechanicals properties of cementitious mixtures with sediments : experimental and numerical approaches 7th international symposium on sediment management, Llille, France, 2021. Links @conference{abdallah:hal-03553075,
title = {Determination of the mechanicals properties of cementitious mixtures with sediments : experimental and numerical approaches},
author = {Amani-Adra Abdallah and Hassina Kada and Toufik Kanit and Abdelwaheb Amrouche},
url = {https://hal-univ-artois.archives-ouvertes.fr/hal-03553075},
year = {2021},
date = {2021-06-01},
urldate = {2021-06-01},
booktitle = {7th international symposium on sediment management},
address = {Llille, France},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2021Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Influence of the formwork removal by polarization on the facing aesthetics in reinforced concrete In: Construction and Building Materials, vol. 284, pp. 122841, 2021. Links @article{Vanhove2021,
title = {Influence of the formwork removal by polarization on the facing aesthetics in reinforced concrete},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
doi = {10.1016/j.conbuildmat.2021.122841},
year = {2021},
date = {2021-05-01},
journal = {Construction and Building Materials},
volume = {284},
pages = {122841},
publisher = {Elsevier BV},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Page, Jonathan; Amziane, Sofiane; Gomina, Moussa; Djelal-Dantec, Chafika; Audonnet, Fabrice Using linseed oil as flax fibre coating for fibre-reinforced cementitious composite In: Industrial Crops and Products, vol. 161, pp. 113168, 2021. Links @article{Page2021,
title = {Using linseed oil as flax fibre coating for fibre-reinforced cementitious composite},
author = {Jonathan Page and Sofiane Amziane and Moussa Gomina and Chafika Djelal-Dantec and Fabrice Audonnet},
doi = {10.1016/j.indcrop.2020.113168},
year = {2021},
date = {2021-03-01},
journal = {Industrial Crops and Products},
volume = {161},
pages = {113168},
publisher = {Elsevier BV},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Spitz, Nicolas; Coniglio, Nicolas; Libessart, Laurent; Mansori, Mohamed El; Djelal-Dantec, Chafika Characterizing tribological behavior of fresh concrete against formwork surfaces In: Construction and Building Materials, vol. 303, pp. 124233, 2021, ISSN: 0950-0618, (ACL). Abstract | Links @article{SPITZ2021124233,
title = {Characterizing tribological behavior of fresh concrete against formwork surfaces},
author = {Nicolas Spitz and Nicolas Coniglio and Laurent Libessart and Mohamed El Mansori and Chafika Djelal-Dantec},
url = {https://www.sciencedirect.com/science/article/pii/S0950061821019930},
doi = {https://doi.org/10.1016/j.conbuildmat.2021.124233},
issn = {0950-0618},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Construction and Building Materials},
volume = {303},
pages = {124233},
abstract = {Concrete walls are constructed by pouring fresh concrete in-between formworks. The lifespan of these formworks is limited due to the abrasive nature of concrete. The present work investigates the wear of metallic and polymeric-coated plates in contact with fresh concrete. Two formulations were studied: standard concrete and self-consolidating concrete. A plane-plane tribometer was used to control the fresh concrete friction against the plates. This device reproduces the implementation of concrete in the formwork. Results revealed a Coulomb friction law within the range of tested normal pressures. The friction testing induced changes in the surface topography of the plates. The evolution in topography were associated to two underlying wear mechanisms: a granulate-formwork solid-solid friction and a capillary-dominated friction.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
Concrete walls are constructed by pouring fresh concrete in-between formworks. The lifespan of these formworks is limited due to the abrasive nature of concrete. The present work investigates the wear of metallic and polymeric-coated plates in contact with fresh concrete. Two formulations were studied: standard concrete and self-consolidating concrete. A plane-plane tribometer was used to control the fresh concrete friction against the plates. This device reproduces the implementation of concrete in the formwork. Results revealed a Coulomb friction law within the range of tested normal pressures. The friction testing induced changes in the surface topography of the plates. The evolution in topography were associated to two underlying wear mechanisms: a granulate-formwork solid-solid friction and a capillary-dominated friction. |
2021Journal Article ER3 Auteurs : Regad, Abdelmalek; Benzerga, Djebara; Berrekia, Habib; Haddi, Abdelkader; Chekhar, Nourredine Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite In: Frattura ed Integrit`a Strutturale / Fracture and Structural Integrity, vol. 15, no. 56, pp. 115-122, 2021, (ACL). Links @article{regad:hal-03616451,
title = {Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite},
author = {Abdelmalek Regad and Djebara Benzerga and Habib Berrekia and Abdelkader Haddi and Nourredine Chekhar},
url = {https://hal-univ-artois.archives-ouvertes.fr/hal-03616451},
doi = {10.3221/IGF-ESIS.56.09},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Frattura ed Integrit`a Strutturale / Fracture and Structural Integrity},
volume = {15},
number = {56},
pages = {115-122},
publisher = {Universit`a di Cassino},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Ajouguim, Soukaina; Talibi, S; Djelal-Dantec, Chafika; Hajjou, H; Waqif, M; Stefanidou, M; Saadi, L Effect of Alfa fibers on the mechanical and thermal properties of compacted earth bricks In: Materials Today: Proceedings, vol. 37, pp. 4049–4057, 2021. Links @article{Ajouguim2021,
title = {Effect of Alfa fibers on the mechanical and thermal properties of compacted earth bricks},
author = {Soukaina Ajouguim and S Talibi and Chafika Djelal-Dantec and H Hajjou and M Waqif and M Stefanidou and L Saadi},
doi = {10.1016/j.matpr.2020.07.539},
year = {2021},
date = {2021-01-01},
journal = {Materials Today: Proceedings},
volume = {37},
pages = {4049--4057},
publisher = {Elsevier BV},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal-Dantec, Chafika; Waqif, Mohamed; â, Latifa Sa Investigation on the use of ground alfa fibres as reinforcement of cement mortars In: Proceedings of the Institution of Civil Engineers - Construction Materials, pp. 1–11, 2020. Links @article{Ajouguim2020,
title = {Investigation on the use of ground alfa fibres as reinforcement of cement mortars},
author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and Mohamed Waqif and Latifa Sa â},
doi = {10.1680/jcoma.20.00001},
year = {2020},
date = {2020-12-01},
journal = {Proceedings of the Institution of Civil Engineers - Construction Materials},
pages = {1--11},
publisher = {Thomas Telford Ltd.},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Messellek, Ali Cherif; Ouali, Mohand Ould; Amrouche, Abdelwaheb Adaptive finite element simulation of fretting wear and fatigue in a taper junction of modular hip prosthesis In: Journal of the Mechanical Behavior of Biomedical Materials, vol. 111, pp. 103993, 2020. Links @article{Messellek_2020,
title = {Adaptive finite element simulation of fretting wear and fatigue in a taper junction of modular hip prosthesis},
author = {Ali Cherif Messellek and Mohand Ould Ouali and Abdelwaheb Amrouche},
doi = {10.1016/j.jmbbm.2020.103993},
year = {2020},
date = {2020-11-01},
journal = {Journal of the Mechanical Behavior of Biomedical Materials},
volume = {111},
pages = {103993},
publisher = {Elsevier BV},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Influence of rheological properties of concrete foundation on the implementation of continuous flight auger (CFA) piles In: Materials and Structures, vol. 53, no. 5, 2020. Links @article{Vanhove2020b,
title = {Influence of rheological properties of concrete foundation on the implementation of continuous flight auger (CFA) piles},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
doi = {10.1617/s11527-020-01556-y},
year = {2020},
date = {2020-09-01},
journal = {Materials and Structures},
volume = {53},
number = {5},
publisher = {Springer Science and Business Media LLC},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Leussa, Claudia Charlotte Tchamo; Libessart, Laurent; Djelal-Dantec, Chafika; Djangang, Chantale Njiomou; Elimbi, Antoine Pozzolanic activity of kaolins containing aluminum hydroxide In: Scientific Reports, vol. 10, no. 1, 2020. Links @article{Leussa2020,
title = {Pozzolanic activity of kaolins containing aluminum hydroxide},
author = {Claudia Charlotte Tchamo Leussa and Laurent Libessart and Chafika Djelal-Dantec and Chantale Njiomou Djangang and Antoine Elimbi},
doi = {10.1038/s41598-020-70146-3},
year = {2020},
date = {2020-08-01},
journal = {Scientific Reports},
volume = {10},
number = {1},
publisher = {Springer Science and Business Media LLC},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Bouchedjra, Moussa; Amrouche, Abdelwaheb; Kanit, Toufik; Belouchrani, Mohamed El Amine Microstructural features effect on the evolution of cyclic damage for polycrystalline metals using a multiscale approach In: International Journal of Damage Mechanics, vol. 30, no. 1, pp. 77–102, 2020. Links @article{Bouchedjra2020,
title = {Microstructural features effect on the evolution of cyclic damage for polycrystalline metals using a multiscale approach},
author = {Moussa Bouchedjra and Abdelwaheb Amrouche and Toufik Kanit and Mohamed El Amine Belouchrani},
doi = {10.1177/1056789520950409},
year = {2020},
date = {2020-08-01},
journal = {International Journal of Damage Mechanics},
volume = {30},
number = {1},
pages = {77--102},
publisher = {SAGE Publications},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Page, Jonathan; Djelal-Dantec, Chafika; Vanhove, Yannick Optimisation of vibrocompaction process for wood-based concrete blocks In: The International Journal of Advanced Manufacturing Technology, vol. 109, no. 3-4, pp. 1189–1204, 2020. Links @article{Page2020b,
title = {Optimisation of vibrocompaction process for wood-based concrete blocks},
author = {Jonathan Page and Chafika Djelal-Dantec and Yannick Vanhove},
doi = {10.1007/s00170-020-05674-3},
year = {2020},
date = {2020-07-01},
journal = {The International Journal of Advanced Manufacturing Technology},
volume = {109},
number = {3-4},
pages = {1189--1204},
publisher = {Springer Science and Business Media LLC},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Nouri, Assia; Hamrat, Mostefa; Boulekbache, Bensaid; Nouri, Said; Bouziadi, Farid; Labed, Abderrahim; Haddi, Abdelkader; Djelal-Dantec, Chafika Quantification of shear strength in reinforced concrete beams using digital image correlation: Experimental and analytical study In: Advances in Structural Engineering, vol. 24, no. 1, pp. 147–164, 2020. Links @article{Nouri2020,
title = {Quantification of shear strength in reinforced concrete beams using digital image correlation: Experimental and analytical study},
author = {Assia Nouri and Mostefa Hamrat and Bensaid Boulekbache and Said Nouri and Farid Bouziadi and Abderrahim Labed and Abdelkader Haddi and Chafika Djelal-Dantec},
doi = {10.1177/1369433220944510},
year = {2020},
date = {2020-07-01},
journal = {Advances in Structural Engineering},
volume = {24},
number = {1},
pages = {147--164},
publisher = {SAGE Publications},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Lahmar, Nassira; Bouziadi, Farid; Boulekbache, Bensaid; Meziane, El-Hadj; Hamrat, Mostefa; Haddi, Abdelkader; Djelal-Dantec, Chafika Experimental and finite element analysis of shrinkage of concrete made with recycled coarse aggregates subjected to thermal loading In: Construction and Building Materials, vol. 247, pp. 118564, 2020. Links @article{Lahmar2020,
title = {Experimental and finite element analysis of shrinkage of concrete made with recycled coarse aggregates subjected to thermal loading},
author = {Nassira Lahmar and Farid Bouziadi and Bensaid Boulekbache and El-Hadj Meziane and Mostefa Hamrat and Abdelkader Haddi and Chafika Djelal-Dantec},
doi = {10.1016/j.conbuildmat.2020.118564},
year = {2020},
date = {2020-06-01},
journal = {Construction and Building Materials},
volume = {247},
pages = {118564},
publisher = {Elsevier BV},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Page, Jonathan; Vanhove, Yannick; Kada, Hassina Experimental study on the valorization of poplar by-products in cement-based materials In: Lecture Notes in Civil Engineering, vol. 54, pp. 603-608, 2020, (cited By 0). Links @article{Djelal2020603,
title = {Experimental study on the valorization of poplar by-products in cement-based materials},
author = {Chafika Djelal-Dantec and Jonathan Page and Yannick Vanhove and Hassina Kada},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073687866&doi=10.1007%2f978-981-15-0802-8_95&partnerID=40&md5=e5ecf9b5701fbc076e31c46b5f86e50b},
doi = {10.1007/978-981-15-0802-8_95},
year = {2020},
date = {2020-01-01},
journal = {Lecture Notes in Civil Engineering},
volume = {54},
pages = {603-608},
note = {cited By 0},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Haddi, Abdelkader; Hamrat, Mostefa; Djelal-Dantec, Chafika Finite element modeling of creep behavior of FRP-externally strengthened reinforced concrete beams In: Engineering Structures, vol. 204, pp. 109908, 2020, ISSN: 0141-0296, (ACL). Abstract | Links @article{BOUZIADI2020109908,
title = {Finite element modeling of creep behavior of FRP-externally strengthened reinforced concrete beams},
author = {Farid Bouziadi and Bensaid Boulekbache and Abdelkader Haddi and Mostefa Hamrat and Chafika Djelal-Dantec},
url = {http://www.sciencedirect.com/science/article/pii/S0141029618334011},
doi = {https://doi.org/10.1016/j.engstruct.2019.109908},
issn = {0141-0296},
year = {2020},
date = {2020-01-01},
journal = {Engineering Structures},
volume = {204},
pages = {109908},
abstract = {In this study, a nonlinear numerical analysis is carried out to predict the creep response of reinforced concrete (RC) beams externally strengthened using carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP) laminates. The beams are tested under static four-point bending; the level of sustained service load is equal to 59% of the ultimate capacities of the un-strengthened beams. The Burger rheological model is used to evaluate the flexural creep response (compressive and tensile creep) and then to validate the findings with experimental results. It is shown that the Burger model effectively predicts the creep of CFRP-bonded RC. Furthermore, parametric studies are performed to investigate the effects of: three fiber orientations of CFRP composites (0°, 45° and 90°), the CFRP thickness, and the type of FRP (CFRP and GFRP) on the flexural creep of FRP-externally retrofitted RC beams based on the Burger rheological model. According to the numerical results, a major reduction in creep strain is obtained with the 45° orientation of CFRP. An increase in CFRP-thickness significantly lowers the creep strain. Moreover, the CFRP laminates prove to be more effective than GFRP in improving the creep response.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
In this study, a nonlinear numerical analysis is carried out to predict the creep response of reinforced concrete (RC) beams externally strengthened using carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP) laminates. The beams are tested under static four-point bending; the level of sustained service load is equal to 59% of the ultimate capacities of the un-strengthened beams. The Burger rheological model is used to evaluate the flexural creep response (compressive and tensile creep) and then to validate the findings with experimental results. It is shown that the Burger model effectively predicts the creep of CFRP-bonded RC. Furthermore, parametric studies are performed to investigate the effects of: three fiber orientations of CFRP composites (0°, 45° and 90°), the CFRP thickness, and the type of FRP (CFRP and GFRP) on the flexural creep of FRP-externally retrofitted RC beams based on the Burger rheological model. According to the numerical results, a major reduction in creep strain is obtained with the 45° orientation of CFRP. An increase in CFRP-thickness significantly lowers the creep strain. Moreover, the CFRP laminates prove to be more effective than GFRP in improving the creep response. |
2020Journal Article ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; de Caro, Pascale; Laiymani, Issam Comparative study of the tribological behaviour of emulsions and demoulding oils at the concrete/formwork interface In: Construction and Building Materials, vol. 239, pp. 117826, 2020, ISSN: 0950-0618, (ACL). Abstract | Links @article{LIBESSART2020117826,
title = {Comparative study of the tribological behaviour of emulsions and demoulding oils at the concrete/formwork interface},
author = {Laurent Libessart and Chafika Djelal-Dantec and Pascale de Caro and Issam Laiymani},
url = {http://www.sciencedirect.com/science/article/pii/S0950061819332799},
doi = {https://doi.org/10.1016/j.conbuildmat.2019.117826},
issn = {0950-0618},
year = {2020},
date = {2020-01-01},
journal = {Construction and Building Materials},
volume = {239},
pages = {117826},
abstract = {To ensure a performing demoulding, a release agent must resist the friction of concrete on the formwork. Emulsions are interesting alternatives that leads to a reduced consumption of oil on construction sites. The behaviours of two commercial emulsions are compared with two conventional demoulding oils. The adhesion energy calculated were favourable to the emulsions. The water evaporation kinetics leads to the measurements of film thickness. Tests with the tribometer have shown that the films produced from the emulsions generate a friction reduction of 30% and 40% at the concrete/formwork interface. Such performance can be explained by Wenzel's state of wettability, which facilitates the film fit into the formwork roughness.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
To ensure a performing demoulding, a release agent must resist the friction of concrete on the formwork. Emulsions are interesting alternatives that leads to a reduced consumption of oil on construction sites. The behaviours of two commercial emulsions are compared with two conventional demoulding oils. The adhesion energy calculated were favourable to the emulsions. The water evaporation kinetics leads to the measurements of film thickness. Tests with the tribometer have shown that the films produced from the emulsions generate a friction reduction of 30% and 40% at the concrete/formwork interface. Such performance can be explained by Wenzel's state of wettability, which facilitates the film fit into the formwork roughness. |
2020Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; Azzi, Amin; Madec, Olivier Recommendation for concrete mix design to prevent bleed channels on diaphragm walls In: European Journal of Environmental and Civil Engineering, vol. 0, no. 0, pp. 1-13, 2020, (ACL). Links @article{Djelalvanhove2020,
title = {Recommendation for concrete mix design to prevent bleed channels on diaphragm walls},
author = {Chafika Djelal-Dantec and Yannick Vanhove and Amin Azzi and Olivier Madec},
url = {https://doi.org/10.1080/19648189.2020.1713900},
doi = {10.1080/19648189.2020.1713900},
year = {2020},
date = {2020-01-01},
journal = {European Journal of Environmental and Civil Engineering},
volume = {0},
number = {0},
pages = {1-13},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Page, Jonathan; Kada, Hassina; Vanhove, Yannick Feasibility study of using poplar wastes as sand in cement mortars In: Journal of Material Cycles and Waste Management, vol. 22, no. 2, pp. 488–500, 2020, ISBN: 1611-8227, (ACL). Abstract | Links @article{DjelalPage2019,
title = {Feasibility study of using poplar wastes as sand in cement mortars},
author = {Chafika Djelal-Dantec and Jonathan Page and Hassina Kada and Yannick Vanhove},
url = {https://doi.org/10.1007/s10163-019-00946-x},
doi = {10.1007/s10163-019-00946-x},
isbn = {1611-8227},
year = {2020},
date = {2020-01-01},
journal = {Journal of Material Cycles and Waste Management},
volume = {22},
number = {2},
pages = {488--500},
abstract = {An experimental investigation was undertaken to evaluate the potential use of poplar by-products in cement mortars. Two by-products from poplar processing were studied: sawdust (from sawing wood) and milled fibres (from wood waste obtained during cutting). Poplar fibres and sawdust were incorporated into mortars as sand volume substitution with rates ranging from 0 to 100%. Before introduction into the mortar, poplar aggregates were characterized (morphology and water absorption). It appeared that these wood aggregates absorb very quickly a large amount of water (up to 200%). The introduction of these poplar by-products has significant effects on the composite properties in both fresh and hardened states. It was noted that the workability of the mixtures with the poplar wood varies with the substitution rate. The inhibition of cement setting with poplar sawdust is characterized by maturity tests and affects the mechanical properties of mortars. In addition, increasing the poplar aggregates content causes a continuous increase of the material porosity, which leads to a decrease in density. Besides, it appears that the incorporation of poplar aggregates into mortars also decrease their thermal conductivities, which would help to reduce building heat losses. A significant decrease in the mechanical properties of poplar-based mortars was also noted, related to the rate of fibres or sawdust introduced into mixtures. The hydration disturbances, the high internal porosity of the wood particles and their low density can explain these lower mechanical strengths. However, despite these disturbances, the valorisation of poplar wood by-products remains possible in cementitious materials for the manufacture of concrete masonry blocks.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
An experimental investigation was undertaken to evaluate the potential use of poplar by-products in cement mortars. Two by-products from poplar processing were studied: sawdust (from sawing wood) and milled fibres (from wood waste obtained during cutting). Poplar fibres and sawdust were incorporated into mortars as sand volume substitution with rates ranging from 0 to 100%. Before introduction into the mortar, poplar aggregates were characterized (morphology and water absorption). It appeared that these wood aggregates absorb very quickly a large amount of water (up to 200%). The introduction of these poplar by-products has significant effects on the composite properties in both fresh and hardened states. It was noted that the workability of the mixtures with the poplar wood varies with the substitution rate. The inhibition of cement setting with poplar sawdust is characterized by maturity tests and affects the mechanical properties of mortars. In addition, increasing the poplar aggregates content causes a continuous increase of the material porosity, which leads to a decrease in density. Besides, it appears that the incorporation of poplar aggregates into mortars also decrease their thermal conductivities, which would help to reduce building heat losses. A significant decrease in the mechanical properties of poplar-based mortars was also noted, related to the rate of fibres or sawdust introduced into mixtures. The hydration disturbances, the high internal porosity of the wood particles and their low density can explain these lower mechanical strengths. However, despite these disturbances, the valorisation of poplar wood by-products remains possible in cementitious materials for the manufacture of concrete masonry blocks. |
2020Conference ER3 Auteurs : Page, Jonathan; Libessart, Laurent; Djelal-Dantec, Chafika Use of biomasse fly ash in cementitious materials Advanced Materials for Sustainable Infrastructure Development, Ventura, USA, 2020, (ACTI). @conference{Page2020a,
title = {Use of biomasse fly ash in cementitious materials},
author = {Jonathan Page and Laurent Libessart and Chafika Djelal-Dantec},
year = {2020},
date = {2020-01-01},
booktitle = {Advanced Materials for Sustainable Infrastructure Development},
address = {Ventura, USA},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2020Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Long, Mardy; Haddi, Abdelkader; Szulc, Julien Effect of marine environment on the behaviour of concrete structures reinforced by composite materials In: Mechanics & Industry, vol. 21, no. 4, pp. 407, 2020. Links @article{Djelal2020b,
title = {Effect of marine environment on the behaviour of concrete structures reinforced by composite materials},
author = {Chafika Djelal-Dantec and Mardy Long and Abdelkader Haddi and Julien Szulc},
doi = {10.1051/meca/2020033},
year = {2020},
date = {2020-01-01},
journal = {Mechanics & Industry},
volume = {21},
number = {4},
pages = {407},
publisher = {EDP Sciences},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Conference ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Effect of rheological properties of concrete foundation on the implementation of CFA-Piles 29th Conference on Rheology of Building Materials, OTH- Regensburg, Germany, 2020, (COM). @conference{,
title = {Effect of rheological properties of concrete foundation on the implementation of CFA-Piles},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
year = {2020},
date = {2020-01-01},
booktitle = {29th Conference on Rheology of Building Materials, OTH- Regensburg, Germany},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; Vanhove, Yannick Influence of concretes thixotropy on the tribological properties One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune), Paris, 2019, (COM). @conference{Libe2019c,
title = {Influence of concretes thixotropy on the tribological properties},
author = {Laurent Libessart and Chafika Djelal-Dantec and Yannick Vanhove},
year = {2019},
date = {2019-11-01},
booktitle = {One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune)},
address = {Paris},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Djelal-Dantec, Chafika; Bouziadi, F; Boulekbache, B; Haddi, Abdelkader; Hamrat, M Creep of reinforced concrete beams under sustained loads: Experiments and numerical modeling approaches 2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concrete (SCC9), Dresden, Germany, 2019, (ACTI). @conference{Djel2019a,
title = {Creep of reinforced concrete beams under sustained loads: Experiments and numerical modeling approaches},
author = {Chafika Djelal-Dantec and F Bouziadi and B Boulekbache and Abdelkader Haddi and M Hamrat},
year = {2019},
date = {2019-09-01},
booktitle = {2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concrete (SCC9)},
address = {Dresden, Germany},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Libessart, Laurent; Laiymani, Issam; Djelal-Dantec, Chafika; Vanhove, Yannick Influence des émulsions sur le frottement du béton 37èmes Rencontres Universitaires de Génie Civil, Nice, 2019, (ACTN). @conference{Libe2019b,
title = {Influence des émulsions sur le frottement du béton},
author = {Laurent Libessart and Issam Laiymani and Chafika Djelal-Dantec and Yannick Vanhove},
year = {2019},
date = {2019-06-01},
booktitle = {37èmes Rencontres Universitaires de Génie Civil},
address = {Nice},
note = {ACTN},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal-Dantec, Chafika; Saadi, L Formulation d’un composite cimentaire incorporant des fibres d’alfa : Influence de la longueur et du taux de fibres 37èmes Rencontres Universitaires de Génie Civil, Nice, 2019, (ACTN). @conference{Ajou2019b,
title = {Formulation d’un composite cimentaire incorporant des fibres d’alfa : Influence de la longueur et du taux de fibres},
author = {Soukaina Ajouguim and Jonathan Page and Chafika Djelal-Dantec and L Saadi},
year = {2019},
date = {2019-06-01},
booktitle = {37èmes Rencontres Universitaires de Génie Civil},
address = {Nice},
note = {ACTN},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Proceedings ER3 Auteurs : Azzi, M -A; Djelal-Dantec, Chafika; Vanhove, Yannick; Madec, O; Gotteland, P Recommendations on the mix design of concrete foundations for diaphragm walls ; Application to the “Grand Paris” building site Arras, France, 2019, ISBN: 978-2-35158-230-5, (ACTI). @proceedings{Azzi2018a,
title = {Recommendations on the mix design of concrete foundations for diaphragm walls ; Application to the “Grand Paris” building site},
author = {M -A Azzi and Chafika Djelal-Dantec and Yannick Vanhove and O Madec and P Gotteland},
editor = {RILEM},
isbn = {978-2-35158-230-5},
year = {2019},
date = {2019-05-01},
booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM Proceedings PRO 132},
address = {Arras, France},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2019Proceedings ER3 Auteurs : Laiymani, I; Libessart, Laurent; Hammouni, S; Djelal-Dantec, Chafika; Vanhove, Yannick Emulsion effects on the friction on the formwork/concrete interface Arras, 2019, ISBN: 978-2-35158-230-5, (ACTI). @proceedings{Laiy2019a,
title = {Emulsion effects on the friction on the formwork/concrete interface},
author = {I Laiymani and Laurent Libessart and S Hammouni and Chafika Djelal-Dantec and Yannick Vanhove},
editor = {RILEM},
isbn = {978-2-35158-230-5},
year = {2019},
date = {2019-05-01},
booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM PRO 132},
address = {Arras},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2019Conference ER3 Auteurs : Bouziadi, F; Boulekbache, B; Haddi, Abdelkader; Hamrat, M; Djelal-Dantec, Chafika; Lahmar, N Analyse du retrait total à long terme du béton à haute résistance contenant des fibres sous différentes températures de cure Journées Nationales du Bétons, JNB’19, Hammamet, Tunisie, 2019, (ACTI). @conference{Bouz2019,
title = {Analyse du retrait total à long terme du béton à haute résistance contenant des fibres sous différentes températures de cure},
author = {F Bouziadi and B Boulekbache and Abdelkader Haddi and M Hamrat and Chafika Djelal-Dantec and N Lahmar},
year = {2019},
date = {2019-04-01},
booktitle = {Journées Nationales du Bétons, JNB’19},
address = {Hammamet, Tunisie},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Djelal-Dantec, Chafika; Libessart, Laurent; Vanhove, Yannick Tribologie et phénoménologie des interfaces béton/coffrage Journées Nationales du Bétons, JNB’19, Hammamet, Tunisie, 2019, (ACTI). @conference{Djel2019b,
title = {Tribologie et phénoménologie des interfaces béton/coffrage},
author = {Chafika Djelal-Dantec and Laurent Libessart and Yannick Vanhove},
year = {2019},
date = {2019-04-01},
booktitle = {Journées Nationales du Bétons, JNB’19},
address = {Hammamet, Tunisie},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Journal Article ER3 Auteurs : Page, Jonathan; Khadraoui, Fouzia; Gomina, Moussa; Boutouil, Mohamed Influence of different surface treatments on the water absorption capacity of flax fibres: Rheology of fresh reinforced-mortars and mechanical properties in the hardened state In: Construction and Building Materials, vol. 199, pp. 424–434, 2019. Links @article{Page_2019,
title = {Influence of different surface treatments on the water absorption capacity of flax fibres: Rheology of fresh reinforced-mortars and mechanical properties in the hardened state},
author = {Jonathan Page and Fouzia Khadraoui and Moussa Gomina and Mohamed Boutouil},
doi = {10.1016/j.conbuildmat.2018.12.042},
year = {2019},
date = {2019-02-01},
journal = {Construction and Building Materials},
volume = {199},
pages = {424--434},
publisher = {Elsevier BV},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2019Journal Article ER3 Auteurs : Habib, Berrekia; Djebbara, Benzerga; Haddi, Abdelkader Behavior and damage of a pipe in the presence of a corrosion defect depth of 10 % of its thickness and highlighting the weaknesses of the ASME / B31G method In: Frattura ed Integrita Strutturale, vol. 13, no. 49, pp. 643-654, 2019, (ACL). Links @article{,
title = {Behavior and damage of a pipe in the presence of a corrosion defect depth of 10 % of its thickness and highlighting the weaknesses of the ASME / B31G method},
author = {Berrekia Habib and Benzerga Djebbara and Abdelkader Haddi},
url = {https://www.fracturae.com/index.php/fis/article/view/2421},
doi = {10.3221/IGF-ESIS.49.58},
year = {2019},
date = {2019-01-01},
journal = {Frattura ed Integrita Strutturale},
volume = {13},
number = {49},
pages = {643-654},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2019Journal Article ER3 Auteurs : Adel, Chouiter; Djebbara, Benzerga; Haddi, Abdelkader; T., Tamine Prediction of cycle life of expansion bellows for fixed tube sheet heat exchanger In: Frattura ed Integrita Strutturale, vol. 13, no. 14, pp. 30-38, 2019, (ACL). Links @article{,
title = {Prediction of cycle life of expansion bellows for fixed tube sheet heat exchanger},
author = {Chouiter Adel and Benzerga Djebbara and Abdelkader Haddi and Tamine T.},
url = {https://www.fracturae.com/index.php/fis/article/view/2146},
doi = {10.3221/IGF-ESIS.47.03},
year = {2019},
date = {2019-01-01},
journal = {Frattura ed Integrita Strutturale},
volume = {13},
number = {14},
pages = {30-38},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2019Book ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18) RILEM Publications S.A.R.L, 2019, ISBN: ISBN 978-2-35158-230-5, e-ISBN 978-2-35158-231-2. @book{,
title = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18)},
author = {Chafika Djelal-Dantec and Yannick Vanhove},
editor = {Chafika Djelal-Dantec and Yannick Vanhove},
isbn = {ISBN 978-2-35158-230-5, e-ISBN 978-2-35158-231-2},
year = {2019},
date = {2019-01-01},
publisher = {RILEM Publications S.A.R.L},
keywords = {ER3},
pubstate = {published},
tppubtype = {book}
}
|
2019Conference ER3 Auteurs : Amziane, S; Djelal-Dantec, Chafika; El-Cheikh, K; Fabbris, F; Fataei, S; Feys, D; Greim, M; Ivanova, I; Keller, H; Khayat, K; Libessart, Laurent; Mechcherine, V; Navarette, I; Perrot, A; Secrieru, E; Sonebi, M; Vanhove, Yannick An overview of RILEM TC MRP round-robin testing of concrete and mortar rheology in Bethune France, May 2018 2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concerte (SCC9), Dresden, Germany, 2019, (ACTI). @conference{Amzi2019a,
title = {An overview of RILEM TC MRP round-robin testing of concrete and mortar rheology in Bethune France, May 2018},
author = {S Amziane and Chafika Djelal-Dantec and K El-Cheikh and F Fabbris and S Fataei and D Feys and M Greim and I Ivanova and H Keller and K Khayat and Laurent Libessart and V Mechcherine and I Navarette and A Perrot and E Secrieru and M Sonebi and Yannick Vanhove},
year = {2019},
date = {2019-01-01},
booktitle = {2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concerte (SCC9)},
address = {Dresden, Germany},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Page, Jonathan; Libessart, Laurent; Djelal-Dantec, Chafika; Laiymani, Issam Feasability of using biomass fly ash in cementitious materials International Conference on Smart Materials for Sustainable Construction, SMASCO, Lulea, Sweden, 2019, (ACTI). @conference{Page2019b,
title = {Feasability of using biomass fly ash in cementitious materials},
author = {Jonathan Page and Laurent Libessart and Chafika Djelal-Dantec and Issam Laiymani},
year = {2019},
date = {2019-01-01},
booktitle = {International Conference on Smart Materials for Sustainable Construction, SMASCO},
address = {Lulea, Sweden},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Djelal-Dantec, Chafika; Page, Jonathan; Vanhove, Yannick; Kada, Hassina Experimental study on the valorisation of poplar by products in cement-based materials The Fifth International Conference (CIGOS 2019), Hanoï, Vietnam, 2019, (ACTI). @conference{Djel2019c,
title = {Experimental study on the valorisation of poplar by products in cement-based materials},
author = {Chafika Djelal-Dantec and Jonathan Page and Yannick Vanhove and Hassina Kada},
year = {2019},
date = {2019-01-01},
booktitle = {The Fifth International Conference (CIGOS 2019)},
address = {Hanoï, Vietnam},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Ajouguim, Soukaina; Djelal-Dantec, Chafika; Page, Jonathan; Waqif, M; Abdelouahdi, K; Saadi, L Experimental investigation on the use of alfa fibers as reinforcement of cementitious materials Third International Conference on Bio-Based Building Materials (ICBBM), Belfast, United-Kingdom, 2019, (ACTI). @conference{Agou2019a,
title = {Experimental investigation on the use of alfa fibers as reinforcement of cementitious materials},
author = {Soukaina Ajouguim and Chafika Djelal-Dantec and Jonathan Page and M Waqif and K Abdelouahdi and L Saadi},
year = {2019},
date = {2019-01-01},
booktitle = {Third International Conference on Bio-Based Building Materials (ICBBM)},
address = {Belfast, United-Kingdom},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Vanhove, Yannick; Agnaou, Elhachemi; Djelal-Dantec, Chafika Utilisation de 3 rhéomètres à béton pour l’étude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons Journées Nationales du Bétons, JNB’19, Hammamet, Tunisie, 2019, (ACTI). @conference{Vanh2019a,
title = {Utilisation de 3 rhéomètres à béton pour l’étude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons},
author = {Yannick Vanhove and Elhachemi Agnaou and Chafika Djelal-Dantec},
year = {2019},
date = {2019-01-01},
booktitle = {Journées Nationales du Bétons, JNB’19},
address = {Hammamet, Tunisie},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Proceedings ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Dairou, M; Thibaut, F; Gotteland, P Rheological behavior of concrete foundation during Pile-driving operations Arras, France, 2019, ISBN: 978-2-35158-230-5, (ACTI). @proceedings{Vanh2019b,
title = {Rheological behavior of concrete foundation during Pile-driving operations},
author = {Yannick Vanhove and Chafika Djelal-Dantec and M Dairou and F Thibaut and P Gotteland},
editor = {RILEM},
isbn = {978-2-35158-230-5},
year = {2019},
date = {2019-01-01},
booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM Proceedings PRO 132},
address = {Arras, France},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2019Conference ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Rheological properties of concrete foundations One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune), Paris, 2019, (COM). @conference{Vanh2019bb,
title = {Rheological properties of concrete foundations},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
year = {2019},
date = {2019-01-01},
booktitle = {One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune)},
address = {Paris},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Libessart, Laurent; Lahlou, Amine; Djelal-Dantec, Chafika; Vanhove, Yannick; Mateo, Sandrine Influence of the emulsions to the interface formwork/concrete 2nd Edition of the International Workshop on Durability and Sustainability of Concrete Structures (DSCS 2018), Moscow, Russia, 2018, (ACTI). @conference{Libe2018a,
title = {Influence of the emulsions to the interface formwork/concrete},
author = {Laurent Libessart and Amine Lahlou and Chafika Djelal-Dantec and Yannick Vanhove and Sandrine Mateo},
year = {2018},
date = {2018-06-01},
booktitle = {2nd Edition of the International Workshop on Durability and Sustainability of Concrete Structures (DSCS 2018)},
address = {Moscow, Russia},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; Roussel, N; Gotteland, P; Darson, S; Borel, S New tests for Tremie Concrete EFFC/DFI/FNTP works, DFI/EFFC International Conference on Deep Foundations and Ground Improvement, Rome, Italy, 2018, (ACTI). @conference{Djel2018b,
title = {New tests for Tremie Concrete EFFC/DFI/FNTP works, DFI/EFFC},
author = {Chafika Djelal-Dantec and Yannick Vanhove and N Roussel and P Gotteland and S Darson and S Borel},
year = {2018},
date = {2018-06-01},
booktitle = {International Conference on Deep Foundations and Ground Improvement},
address = {Rome, Italy},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Fajfrowski, M; Djelal-Dantec, Chafika; Vanhove, Yannick Un nouvel instrument de caractérisation : le tribomètre béton Journées Internationales de Tribologie (JIFT 2018), Mines Paris Tech CEMEF, Sophia Antipolis, 2018, (ACTI). @conference{Fajf2018a,
title = {Un nouvel instrument de caractérisation : le tribomètre béton},
author = {M Fajfrowski and Chafika Djelal-Dantec and Yannick Vanhove},
year = {2018},
date = {2018-05-01},
booktitle = {Journées Internationales de Tribologie (JIFT 2018), Mines Paris Tech CEMEF},
address = {Sophia Antipolis},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; Joly, N; Vanhove, Yannick; Martin, P Utilisation des huiles recyclées pour le décoffrage du béton – Etude de l’esthétique des parements Journées d’Etude Techniques de l’Association Franco-Maghrebine de Mécanique et des Matériaux (AF3M), JET’2018, Marrakech, 2018, (ACTI). @conference{Libe2018b,
title = {Utilisation des huiles recyclées pour le décoffrage du béton – Etude de l’esthétique des parements},
author = {Laurent Libessart and Chafika Djelal-Dantec and N Joly and Yannick Vanhove and P Martin},
year = {2018},
date = {2018-05-01},
booktitle = {Journées d’Etude Techniques de l’Association Franco-Maghrebine de Mécanique et des Matériaux (AF3M), JET’2018},
address = {Marrakech},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Journal Article ER3 Auteurs : Cheikh, K El; Djelal-Dantec, Chafika; Vanhove, Yannick; Pizette, Patrick; Rémond, Sébastien Experimental and numerical study of granular medium-rough wall interface friction In: Advanced Powder Technology, vol. 29, no. 1, pp. 130-141, 2018, (cited By 1). Links @article{ElCheikh2018130b,
title = {Experimental and numerical study of granular medium-rough wall interface friction},
author = {K El Cheikh and Chafika Djelal-Dantec and Yannick Vanhove and Patrick Pizette and Sébastien Rémond},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85032823309&doi=10.1016%2fj.apt.2017.10.020&partnerID=40&md5=611df63f3e46d6de1b710337441924f5},
doi = {10.1016/j.apt.2017.10.020},
year = {2018},
date = {2018-01-01},
journal = {Advanced Powder Technology},
volume = {29},
number = {1},
pages = {130-141},
note = {cited By 1},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2018Journal Article ER3 Auteurs : Bouchedjra, M; Kanit, T; Boulemia, C; Amrouche, Abdelwaheb; Belouchrani, M E A Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria In: European Journal of Mechanics, A/Solids, vol. 72, pp. 1-15, 2018, (cited By 0). Links @article{Bouchedjra20181,
title = {Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria},
author = {M Bouchedjra and T Kanit and C Boulemia and Abdelwaheb Amrouche and M E A Belouchrani},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85046031401&doi=10.1016%2fj.euromechsol.2018.04.011&partnerID=40&md5=01417e1e2c72f664ab90951239602ec1},
doi = {10.1016/j.euromechsol.2018.04.011},
year = {2018},
date = {2018-01-01},
journal = {European Journal of Mechanics, A/Solids},
volume = {72},
pages = {1-15},
note = {cited By 0},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2018Journal Article ER3 Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Haddi, Abdelkader; Djelal-Dantec, Chafika; Hamrat, Mostefa Numerical analysis of shrinkage of steel fiber reinforced high-strength concrete subjected to thermal loading In: Construction and Building Materials, vol. 181, pp. 381 - 393, 2018, ISSN: 0950-0618, (ACL). Abstract | Links @article{BOUZIADI2018381,
title = {Numerical analysis of shrinkage of steel fiber reinforced high-strength concrete subjected to thermal loading},
author = {Farid Bouziadi and Bensaid Boulekbache and Abdelkader Haddi and Chafika Djelal-Dantec and Mostefa Hamrat},
url = {http://www.sciencedirect.com/science/article/pii/S0950061818314454},
doi = {https://doi.org/10.1016/j.conbuildmat.2018.06.054},
issn = {0950-0618},
year = {2018},
date = {2018-01-01},
journal = {Construction and Building Materials},
volume = {181},
pages = {381 - 393},
abstract = {In this study, a numerical investigation is conducted to simulate the total shrinkage strain of High-Strength Concrete (HSC) and Steel Fiber Reinforced High-Strength concrete (SFRHSC) by means of the transient thermal-stress analysis. The ANSYS finite element software has been used in order to evaluate the shrinkage by taking into account both the thermal and mechanical properties of the concrete. These properties are calculated using the maturity concept and the two-phase serial model. The experimental work was carried out to assess the influence of the external temperatures, steel fibers (SF) and their volume fraction on the total shrinkage strain of the SFRHSC which has been exposed to isothermal temperature of 20, 35 and 50 °C. Two dosages of 0.5% and 1% for the SF with aspect ratio of 55 have been considered. The main results obtained from the FE analysis show a good agreement with the founded experimental results under different thermal conditions. According to the obtained numerical results, an increase of the dosage of fibers will reduce the total shrinkage strain. Additionally, the curing temperature raises significantly the evolution of the total shrinkage strain.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
In this study, a numerical investigation is conducted to simulate the total shrinkage strain of High-Strength Concrete (HSC) and Steel Fiber Reinforced High-Strength concrete (SFRHSC) by means of the transient thermal-stress analysis. The ANSYS finite element software has been used in order to evaluate the shrinkage by taking into account both the thermal and mechanical properties of the concrete. These properties are calculated using the maturity concept and the two-phase serial model. The experimental work was carried out to assess the influence of the external temperatures, steel fibers (SF) and their volume fraction on the total shrinkage strain of the SFRHSC which has been exposed to isothermal temperature of 20, 35 and 50 °C. Two dosages of 0.5% and 1% for the SF with aspect ratio of 55 have been considered. The main results obtained from the FE analysis show a good agreement with the founded experimental results under different thermal conditions. According to the obtained numerical results, an increase of the dosage of fibers will reduce the total shrinkage strain. Additionally, the curing temperature raises significantly the evolution of the total shrinkage strain. |
2018Journal Article ER3 Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Haddi, Abdelkader; Djelal-Dantec, Chafika Experimental and finite element analysis of creep behaviour of steel fibre reinforced high strength concrete beams In: Construction and Building Materials, vol. 173, pp. 101 - 110, 2018, ISSN: 0950-0618, (ACL). Abstract | Links @article{BOUZIADI2018101,
title = {Experimental and finite element analysis of creep behaviour of steel fibre reinforced high strength concrete beams},
author = {Farid Bouziadi and Bensaid Boulekbache and Abdelkader Haddi and Chafika Djelal-Dantec},
url = {http://www.sciencedirect.com/science/article/pii/S0950061818308031},
doi = {https://doi.org/10.1016/j.conbuildmat.2018.04.013},
issn = {0950-0618},
year = {2018},
date = {2018-01-01},
journal = {Construction and Building Materials},
volume = {173},
pages = {101 - 110},
abstract = {The present study is focused on experimental investigations and numerical analyses of compressive and tensile total creep at long-term of high-strength concrete (HSC) beams. Reinforced concrete (RC) beams with and without steel fibres were investigated for their long-term creep behaviour. These beams are under sustained uniformly distributed load (SUDL) in bending containing steel fibres (SF) with two aspect ratios (55 and 80) and two steel fibre dosages (0.5% and 1%). The objective of this work is to evaluate the influence of steel fibres, their dosage and their aspect ratio on compressive and tensile total creep. Experimental results show that the long-term total creep is influenced by the volume fractions of steel fibres. Moreover, steel fibres decrease the tensile total creep more than the compressive one. A non-linear finite element method (FEM) is performed to simulate the long-term total creep strain rate included thanks to the time hardening model called generalized Garofalo creep which is based on Bailey-Norton law called power law creep. It was found a good agreement between the experimental and numerical results.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
The present study is focused on experimental investigations and numerical analyses of compressive and tensile total creep at long-term of high-strength concrete (HSC) beams. Reinforced concrete (RC) beams with and without steel fibres were investigated for their long-term creep behaviour. These beams are under sustained uniformly distributed load (SUDL) in bending containing steel fibres (SF) with two aspect ratios (55 and 80) and two steel fibre dosages (0.5% and 1%). The objective of this work is to evaluate the influence of steel fibres, their dosage and their aspect ratio on compressive and tensile total creep. Experimental results show that the long-term total creep is influenced by the volume fractions of steel fibres. Moreover, steel fibres decrease the tensile total creep more than the compressive one. A non-linear finite element method (FEM) is performed to simulate the long-term total creep strain rate included thanks to the time hardening model called generalized Garofalo creep which is based on Bailey-Norton law called power law creep. It was found a good agreement between the experimental and numerical results. |
2018Journal Article ER3 Auteurs : Kesteloot, Stephan; Haddi, Abdelkader; Djelal-Dantec, Chafika Experimental and Numerical Investigations of Damage Behaviour at the Fibre Mortar Composite Interfaces In: International Journal of Civil Engineering, vol. 16, no. 11, pp. 1523-1532, 2018, ISSN: 2383-3874, (ACL). Links @article{,
title = {Experimental and Numerical Investigations of Damage Behaviour at the Fibre Mortar Composite Interfaces},
author = {Stephan Kesteloot and Abdelkader Haddi and Chafika Djelal-Dantec},
url = {https://link.springer.com/article/10.1007%2Fs40999-018-0287-y},
doi = {10.1007/s40999-018-0287-y},
issn = {2383-3874},
year = {2018},
date = {2018-01-01},
journal = {International Journal of Civil Engineering},
volume = {16},
number = {11},
pages = {1523-1532},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2018Journal Article ER3 Auteurs : B., Nekkaa; Djebbara, Benzerga; Haddi, Abdelkader Damage analysis of corroded pipelines reinforced by composite materials In: International Review of Mechanical Engineering, vol. 12, no. 3, pp. 249-254, 2018, (ACL). Links @article{,
title = {Damage analysis of corroded pipelines reinforced by composite materials},
author = {Nekkaa B. and Benzerga Djebbara and Abdelkader Haddi},
url = {https://www.praiseworthyprize.org/jsm/index.php?journal=ireme&page=article&op=view&path[]=21393},
doi = {10.15866/ireme.v12i3.13447},
year = {2018},
date = {2018-01-01},
journal = {International Review of Mechanical Engineering},
volume = {12},
number = {3},
pages = {249-254},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2018Journal Article ER3 Auteurs : Tilioua, Amine; Libessart, Laurent; Lassue, Stéphane Characterization of the thermal properties of fibrous insulation materials made from recycled textile fibers for building applications : Theoretical and experimental analyses In: Applied Thermal Engineering, vol. 142, pp. 56 - 67, 2018, ISSN: 1359-4311, (ACL). Abstract | Links @article{TILIOUA201856,
title = {Characterization of the thermal properties of fibrous insulation materials made from recycled textile fibers for building applications : Theoretical and experimental analyses},
author = {Amine Tilioua and Laurent Libessart and Stéphane Lassue},
url = {http://www.sciencedirect.com/science/article/pii/S1359431117355473},
doi = {https://doi.org/10.1016/j.applthermaleng.2018.06.071},
issn = {1359-4311},
year = {2018},
date = {2018-01-01},
journal = {Applied Thermal Engineering},
volume = {142},
pages = {56 - 67},
abstract = {The present study focuses on the thermal characterization of an insulation material made from recycled textile fibers for building applications, which qualifies as a semi-transparent medium. Experimental and numerical studies have been carried out to determine the radiative flux ratio for such a recycled textile fiber-based insulation for three thicknesses (5.35 mm, 5.67 mm and 6.64 mm). The inverse method, which relies on reflection and transmission measurements using a Fourier-Transform Infrared Spectrometer coupled to an integrating sphere, has been applied along with a least squares procedure. The relevant radiative properties of recycled textile insulation material are obtained by minimizing the deviation between experimental and theoretical data. The effective thermal conductivity of the fibrous insulation is measured at room temperature by means of a fluxmeter device. The radiative thermal conductivity is estimated by implementing the Rosseland model, while phonic conductivity is derived from the effective thermal conductivity. The radiative thermal conductivity displays a very limited effect in comparison with phonic thermal conductivity; the latter varies according to thickness, which in turn is determined by fiber density and size. Phonic thermal conductivity accounts for 26% of the effective thermal conductivity and moreover constitutes a large share (74%) relative to the radiative conductivity. The maximum radiative thermal conductivity value equals 0.0102 W m−1 K−1 for a thickness of 5.67 mm, with this value dropping slightly to 0.010 W m−1 K−1 for a thickness of 6.46 mm, and to a minimum value of 0.0096 W m−1 K−1 at a 5.35-mm thickness.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
The present study focuses on the thermal characterization of an insulation material made from recycled textile fibers for building applications, which qualifies as a semi-transparent medium. Experimental and numerical studies have been carried out to determine the radiative flux ratio for such a recycled textile fiber-based insulation for three thicknesses (5.35 mm, 5.67 mm and 6.64 mm). The inverse method, which relies on reflection and transmission measurements using a Fourier-Transform Infrared Spectrometer coupled to an integrating sphere, has been applied along with a least squares procedure. The relevant radiative properties of recycled textile insulation material are obtained by minimizing the deviation between experimental and theoretical data. The effective thermal conductivity of the fibrous insulation is measured at room temperature by means of a fluxmeter device. The radiative thermal conductivity is estimated by implementing the Rosseland model, while phonic conductivity is derived from the effective thermal conductivity. The radiative thermal conductivity displays a very limited effect in comparison with phonic thermal conductivity; the latter varies according to thickness, which in turn is determined by fiber density and size. Phonic thermal conductivity accounts for 26% of the effective thermal conductivity and moreover constitutes a large share (74%) relative to the radiative conductivity. The maximum radiative thermal conductivity value equals 0.0102 W m−1 K−1 for a thickness of 5.67 mm, with this value dropping slightly to 0.010 W m−1 K−1 for a thickness of 6.46 mm, and to a minimum value of 0.0096 W m−1 K−1 at a 5.35-mm thickness. |
2018Journal Article ER3 Auteurs : Cheikh, Khadija El; Djelal-Dantec, Chafika; Vanhove, Yannick; Pizette, Patrick; Rémond, Sébastien Experimental and numerical study of granular medium-rough wall interface friction In: Advanced Powder Technology, vol. 29, no. 1, pp. 130 - 141, 2018, ISSN: 0921-8831, (ACL). Abstract | Links @article{ELCHEIKH2018130,
title = {Experimental and numerical study of granular medium-rough wall interface friction},
author = {Khadija El Cheikh and Chafika Djelal-Dantec and Yannick Vanhove and Patrick Pizette and Sébastien Rémond},
url = {http://www.sciencedirect.com/science/article/pii/S0921883117304168},
doi = {https://doi.org/10.1016/j.apt.2017.10.020},
issn = {0921-8831},
year = {2018},
date = {2018-01-01},
journal = {Advanced Powder Technology},
volume = {29},
number = {1},
pages = {130 - 141},
abstract = {Wall roughness plays a crucial role in granular medium - rough wall interface friction. In this study, an experimental device has been designed to study the influence of boundary conditions, more specifically wall roughness, on the behavior of sheared granular medium. The study is based on use of an analog model, and consists of simulating roughness by means of notches and grains in the medium by monodisperse beads and on use of a numerical model based on the discrete element method. The test protocol entails displacing at fixed speed notched rods under confined granular medium. Movement of the beads layer near the rods as well as friction of the beads against the rods are both studied herein. Results indicate that the parameter controlling friction at the granular medium - rough wall interface is primarily the depth of beads embedment in surface asperities. The objective of the associated numerical modeling is to supplement the experimental results.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
Wall roughness plays a crucial role in granular medium - rough wall interface friction. In this study, an experimental device has been designed to study the influence of boundary conditions, more specifically wall roughness, on the behavior of sheared granular medium. The study is based on use of an analog model, and consists of simulating roughness by means of notches and grains in the medium by monodisperse beads and on use of a numerical model based on the discrete element method. The test protocol entails displacing at fixed speed notched rods under confined granular medium. Movement of the beads layer near the rods as well as friction of the beads against the rods are both studied herein. Results indicate that the parameter controlling friction at the granular medium - rough wall interface is primarily the depth of beads embedment in surface asperities. The objective of the associated numerical modeling is to supplement the experimental results. |
2018Conference ER3 Auteurs : Agnaou, E; Vanhove, Yannick; Djelal-Dantec, Chafika Correlating factors between rheometer for self-compacting concrete 12th fib International PhD-Symposium in Civil Engineering, Prague, 2018, (ACTI). @conference{Agna2018a,
title = {Correlating factors between rheometer for self-compacting concrete},
author = {E Agnaou and Yannick Vanhove and Chafika Djelal-Dantec},
year = {2018},
date = {2018-01-01},
booktitle = {12th fib International PhD-Symposium in Civil Engineering},
address = {Prague},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Agnaou, E; Vanhove, Yannick; Djelal-Dantec, Chafika Etude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons autoplaçants à l’aide de trois rhéomètres 36èmes Rencontres Universitaires de Génie Civil, Saint Etienne, 2018, (ATCN). @conference{Agna2018b,
title = {Etude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons autoplaçants à l’aide de trois rhéomètres},
author = {E Agnaou and Yannick Vanhove and Chafika Djelal-Dantec},
year = {2018},
date = {2018-01-01},
booktitle = {36èmes Rencontres Universitaires de Génie Civil},
address = {Saint Etienne},
note = {ATCN},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Rheology of Tremie Concrete – Diaphragm wall and Pile-Driving Operations using Hollow Auger EFFC meeting, Federation of German Construction Industry, Berlin, 2018, (COM). @conference{Vanh2019d,
title = {Rheology of Tremie Concrete – Diaphragm wall and Pile-Driving Operations using Hollow Auger},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
year = {2018},
date = {2018-01-01},
booktitle = {EFFC meeting, Federation of German Construction Industry},
address = {Berlin},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Leussa, C Tchamo; Djangang, C Njiomou; Elimbi, A; Libessart, Laurent; Djelal-Dantec, Chafika Effects of aluminum hydroxide on the pozzolanic properties of kaolinitic clays The doctoral research and training unit for chemistry and application (URFD-CA) – PhD Students seminars in chemistry and application, Ed 2018, Yaoudé, Cameroun, 2018, (COM). @conference{Tcha2018a,
title = {Effects of aluminum hydroxide on the pozzolanic properties of kaolinitic clays},
author = {C Tchamo Leussa and C Njiomou Djangang and A Elimbi and Laurent Libessart and Chafika Djelal-Dantec},
year = {2018},
date = {2018-01-01},
booktitle = {The doctoral research and training unit for chemistry and application (URFD-CA) – PhD Students seminars in chemistry and application, Ed 2018},
address = {Yaoudé, Cameroun},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2017Journal Article ER3 Auteurs : Engone, Jean-Gérard Ndong; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina Optimizing mortar extrusion using poplar wood sawdust for masonry building block In: The International Journal of Advanced Manufacturing Technology, vol. 95, no. 9, pp. 3769–3780, 2017, ISBN: 1433-3015, (ACL). Abstract | Links @article{Ndong2018,
title = {Optimizing mortar extrusion using poplar wood sawdust for masonry building block},
author = {Jean-Gérard Ndong Engone and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada},
url = {https://doi.org/10.1007/s00170-017-1323-9},
doi = {10.1007/s00170-017-1323-9},
isbn = {1433-3015},
year = {2017},
date = {2017-12-21},
urldate = {2017-12-21},
journal = {The International Journal of Advanced Manufacturing Technology},
volume = {95},
number = {9},
pages = {3769--3780},
abstract = {The wood industry generates some 12 million tons of waste in France, 60% of which basically stems from sawmills. The reuse of this waste in the most common construction materials (e.g., concrete) may offer a sustainable solution. In the literature, the optimization of composites formulations generally focuses on aggregates plant pretreatment regardless of classical optimization parameters and the implementation process that can afford to get a high strength composite. The work presented herein is intended to optimize the mix design of a mortar made from poplar wood by-products, without involving any pretreatment. The conventional mix design parameters (i.e., paste volume, W/C ratio) have been varied. An optimal implementation technique (i.e., extrusion) was used. The wood mortar mix designs have been optimized in order to obtain composites compliant with French standard NF EN 771-3/CN, with respect to criteria regarding both dimensional tolerance and mechanical strength for structural elements (i.e., above 8 MPa at 7 days).A mortar mix design, optimized by means of extrusion, has been used as a reference. Poplar wood particles have been introduced through substitution for the sand volume. Test results indicate that the blocks produced from two wood mortar mixes with 60 and 70% wood aggregate-for-sand substitution rates are in line with the normative requirements relative to dimensional tolerances and mechanical strength. This material compliance underscores the potential use of such blocks as load-bearing masonry elements, thus facilitating the building of structures with a limited environmental impact.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
The wood industry generates some 12 million tons of waste in France, 60% of which basically stems from sawmills. The reuse of this waste in the most common construction materials (e.g., concrete) may offer a sustainable solution. In the literature, the optimization of composites formulations generally focuses on aggregates plant pretreatment regardless of classical optimization parameters and the implementation process that can afford to get a high strength composite. The work presented herein is intended to optimize the mix design of a mortar made from poplar wood by-products, without involving any pretreatment. The conventional mix design parameters (i.e., paste volume, W/C ratio) have been varied. An optimal implementation technique (i.e., extrusion) was used. The wood mortar mix designs have been optimized in order to obtain composites compliant with French standard NF EN 771-3/CN, with respect to criteria regarding both dimensional tolerance and mechanical strength for structural elements (i.e., above 8 MPa at 7 days).A mortar mix design, optimized by means of extrusion, has been used as a reference. Poplar wood particles have been introduced through substitution for the sand volume. Test results indicate that the blocks produced from two wood mortar mixes with 60 and 70% wood aggregate-for-sand substitution rates are in line with the normative requirements relative to dimensional tolerances and mechanical strength. This material compliance underscores the potential use of such blocks as load-bearing masonry elements, thus facilitating the building of structures with a limited environmental impact. |
2017Journal Article ER3 Auteurs : Messellek, A C; Ouali, M Ould; Benabid, Y; Amrouche, Abdelwaheb; Beloulla, A Material selection process for femoral component of hip prosthesis using finite element analysis and ranking method In: Computer Methods in Biomechanics and Biomedical Engineering, vol. 20, pp. 133-134, 2017, (cited By 0). Links @article{Messellek2017133,
title = {Material selection process for femoral component of hip prosthesis using finite element analysis and ranking method},
author = {A C Messellek and M Ould Ouali and Y Benabid and Abdelwaheb Amrouche and A Beloulla},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85032685739&doi=10.1080%2f10255842.2017.1382897&partnerID=40&md5=550dc127b32fb0921a941b07084d3c54},
doi = {10.1080/10255842.2017.1382897},
year = {2017},
date = {2017-01-01},
journal = {Computer Methods in Biomechanics and Biomedical Engineering},
volume = {20},
pages = {133-134},
note = {cited By 0},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2017Journal Article ER3 Auteurs : Alatorre, N; Ambriz, R R; Amrouche, Abdelwaheb; García, C; Jaramillo, D Fatigue crack growth in Al-Zn-Mg (7075-T651) welds obtained by modified indirect and gas metal arc welding techniques In: Journal of Materials Processing Technology, vol. 248, pp. 207-217, 2017, (cited By 1). Links @article{Alatorre2017207,
title = {Fatigue crack growth in Al-Zn-Mg (7075-T651) welds obtained by modified indirect and gas metal arc welding techniques},
author = {N Alatorre and R R Ambriz and Abdelwaheb Amrouche and C García and D Jaramillo},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85020005705&doi=10.1016%2fj.jmatprotec.2017.05.025&partnerID=40&md5=d449e1b47b6ea6fbc6ac571cdc26d153},
doi = {10.1016/j.jmatprotec.2017.05.025},
year = {2017},
date = {2017-01-01},
journal = {Journal of Materials Processing Technology},
volume = {248},
pages = {207-217},
note = {cited By 1},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2017Journal Article ER3 Auteurs : Messellek, A C; Ouali, M O; Benabid, Y; Amrouche, Abdelwaheb; Beloulla, A Design optimization and material selection of acetabular component of hip prosthesis using computational concepts In: Computer Methods in Biomechanics and Biomedical Engineering, vol. 20, pp. 131-132, 2017, (cited By 0). Links @article{Messellek2017131,
title = {Design optimization and material selection of acetabular component of hip prosthesis using computational concepts},
author = {A C Messellek and M O Ouali and Y Benabid and Abdelwaheb Amrouche and A Beloulla},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85032656904&doi=10.1080%2f10255842.2017.1382896&partnerID=40&md5=3c7b152414e55e7b4e99d32aab30b296},
doi = {10.1080/10255842.2017.1382896},
year = {2017},
date = {2017-01-01},
journal = {Computer Methods in Biomechanics and Biomedical Engineering},
volume = {20},
pages = {131-132},
note = {cited By 0},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2017Conference ER3 Auteurs : Kesteloot, Stephan; Haddi, Abdelkader; Djelal-Dantec, Chafika Damage behaviour of millstone vaults reinforced by composite materials 17th International conference on new trends in fatigue and fracture, Cancunn Mexico, 2017. @conference{,
title = {Damage behaviour of millstone vaults reinforced by composite materials},
author = {Stephan Kesteloot and Abdelkader Haddi and Chafika Djelal-Dantec},
year = {2017},
date = {2017-01-01},
booktitle = {17th International conference on new trends in fatigue and fracture, Cancunn Mexico},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2016Journal Article ER3 Auteurs : Chartier, Thierry; Carpentier, Olivier; Genestie, Benoit; Hornez, J-C.; Monchau, Francine Numerical and ex vivo studies of a bioprobe developed for laser-induced thermotherapy (LITT) in contact with liver tissue In: Medical Engineering & Physics, vol. 38, no. 8, pp. 733-740, 2016, (ACL). Links @article{chartier:hal-03276066,
title = {Numerical and ex vivo studies of a bioprobe developed for laser-induced thermotherapy (LITT) in contact with liver tissue},
author = {Thierry Chartier and Olivier Carpentier and Benoit Genestie and J-C. Hornez and Francine Monchau},
url = {https://hal-unilim.archives-ouvertes.fr/hal-03276066},
doi = {10.1016/j.medengphy.2016.04.024},
year = {2016},
date = {2016-08-01},
urldate = {2016-08-01},
journal = {Medical Engineering & Physics},
volume = {38},
number = {8},
pages = {733-740},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2016Journal Article ER3 Auteurs : Djebli, A; Benhamena, A; Aminallah, L; Aid, A; Benguediab, M; Amrouche, Abdelwaheb Three-dimensional finite element analysis of fracture behaviour of adhesively bonded single lap-joints In: Mechanika, vol. 22, no. 5, pp. 371-375, 2016, (cited By 0). Links @article{Djebli2016371,
title = {Three-dimensional finite element analysis of fracture behaviour of adhesively bonded single lap-joints},
author = {A Djebli and A Benhamena and L Aminallah and A Aid and M Benguediab and Abdelwaheb Amrouche},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84995743756&doi=10.5755%2fj01.mech.22.5.12879&partnerID=40&md5=6ce3f935bb693150f024ccc18a2b7246},
doi = {10.5755/j01.mech.22.5.12879},
year = {2016},
date = {2016-01-01},
journal = {Mechanika},
volume = {22},
number = {5},
pages = {371-375},
note = {cited By 0},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2016Conference ER3 Auteurs : S., Kermiche; Haddi, Abdelkader; Djelal-Dantec, Chafika; B., Redjel; O., Boussaid Damage predictions in concrete silo using finite element analyses Fib symposium, cape town, South Africa, 2016. @conference{,
title = {Damage predictions in concrete silo using finite element analyses},
author = {Kermiche S. and Abdelkader Haddi and Chafika Djelal-Dantec and Redjel B. and Boussaid O.},
year = {2016},
date = {2016-01-01},
booktitle = {Fib symposium, cape town, South Africa},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2016Proceedings Article ER3 Auteurs : Dairou, Mariam Mohaman; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina; Gotteland, Philippe Rheological Behaviour Study of Semi Flowable SCC during CFA Pile-Driving Operations In: pp. 429, 2016, (ACTI). @inproceedings{dairou2016rheological,
title = {Rheological Behaviour Study of Semi Flowable SCC during CFA Pile-Driving Operations},
author = {Mariam Mohaman Dairou and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada and Philippe Gotteland},
year = {2016},
date = {2016-01-01},
journal = {Washington DC, USA 15-18 May 2016 Edited by Kamal H. Khayat},
pages = {429},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2015Journal Article ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; de Caro, Pascale; Dubois, Isabelle Correlation between adhesion energy of release agents on the formwork and demoulding performances In: Construction and Building Materials, vol. 76, pp. 130 - 139, 2015, ISSN: 0950-0618, (ACL). Abstract | Links @article{libe2015a,
title = {Correlation between adhesion energy of release agents on the formwork and demoulding performances},
author = {Laurent Libessart and Chafika Djelal-Dantec and Pascale de Caro and Isabelle Dubois},
url = {http://www.sciencedirect.com/science/article/pii/S095006181401280X},
doi = {http://dx.doi.org/10.1016/j.conbuildmat.2014.11.061},
issn = {0950-0618},
year = {2015},
date = {2015-01-01},
journal = {Construction and Building Materials},
volume = {76},
pages = {130 - 139},
abstract = {Abstract To ensure an easy demoulding of the concrete, the release agent must form a homogeneous film on the formwork to resist the casting concrete. The adherence of oil with the support was studied via the solid/liquid energy adhesion. This energy was calculated using the Zisman equation involving the angle of drop and the surface tension. Various formulations were studied, in order to establish correlations between their composition and the interfacial properties. Formwork release tests were performed to assess cladding aesthetics; it was possible to define a minimal level of adhesion energy to meet the facings quality after concrete demoulding.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
Abstract To ensure an easy demoulding of the concrete, the release agent must form a homogeneous film on the formwork to resist the casting concrete. The adherence of oil with the support was studied via the solid/liquid energy adhesion. This energy was calculated using the Zisman equation involving the angle of drop and the surface tension. Various formulations were studied, in order to establish correlations between their composition and the interfacial properties. Formwork release tests were performed to assess cladding aesthetics; it was possible to define a minimal level of adhesion energy to meet the facings quality after concrete demoulding. |
2015Book ER3 Auteurs : Aid, A; Benguediab, Mohamed; Amrouche, Abdelwaheb Finite element simulation of fatigue damage accumulation for repaired component by cold expansion method Multiphysics Modelloing and simulation for Systems Design and Monitoring 2015, (OS). @book{aid2015b,
title = {Finite element simulation of fatigue damage accumulation for repaired component by cold expansion method Multiphysics Modelloing and simulation for Systems Design and Monitoring},
author = {A Aid and Mohamed Benguediab and Abdelwaheb Amrouche},
editor = {Springer},
year = {2015},
date = {2015-01-01},
note = {OS},
keywords = {ER3},
pubstate = {published},
tppubtype = {book}
}
|
2015Journal Article ER3 Auteurs : Benkabouche, S; Guechichi, H; Amrouche, Abdelwaheb; Benkhettab, Mohamed A modified nonlinear fatigue damage accumulation model under multiaxial variable amplitude loading In: International Journal of Mechanical Sciences, vol. 100, pp. 180-194, 2015, (ACL). Links @article{benk2015a,
title = {A modified nonlinear fatigue damage accumulation model under multiaxial variable amplitude loading},
author = {S Benkabouche and H Guechichi and Abdelwaheb Amrouche and Mohamed Benkhettab},
doi = {DOI:10.1016/j.ijmecsci.2015.06.016},
year = {2015},
date = {2015-01-01},
journal = {International Journal of Mechanical Sciences},
volume = {100},
pages = {180-194},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Journal Article ER3 Auteurs : Fares, Chahinez; Hemmouche, L; Belouchrani, M A; Amrouche, Abdelwaheb; Chicot, D; Puchi-Cabrera, E S Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy In: Materials & Design, vol. 86, pp. 723-734, 2015, (ACL). Links @article{fare2015a,
title = {Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy},
author = {Chahinez Fares and L Hemmouche and M A Belouchrani and Abdelwaheb Amrouche and D Chicot and E S Puchi-Cabrera},
doi = {DOI:10.1016/j.matdes.2015.07.120},
year = {2015},
date = {2015-01-01},
journal = {Materials & Design},
volume = {86},
pages = {723-734},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Journal Article ER3 Auteurs : Ghemari, Zine; Saad, Salah; Amrouche, Abdelwaheb; Lakehal, Abdelaziz New Model of Piezoelectric Accelerometer Relative Movement Modulus In: Transactions of the Institute of Measurement and Control, vol. 37, no. 8, pp. 932-941, 2015, (ACL). Links @article{ghem2015a,
title = {New Model of Piezoelectric Accelerometer Relative Movement Modulus},
author = {Zine Ghemari and Salah Saad and Abdelwaheb Amrouche and Abdelaziz Lakehal},
doi = {DOI:10.1177/0142331214549572},
year = {2015},
date = {2015-01-01},
journal = {Transactions of the Institute of Measurement and Control},
volume = {37},
number = {8},
pages = {932-941},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Journal Article ER3 Auteurs : Rubio-Gonzalez, C; Gomez-Rosas, G; Ruiz, R; Nait-Abdelaziz, Moussa; Amrouche, Abdelwaheb Effect of laser shock peening and cold expansion on fatigue performance of open hole samples In: Structural Engineering and Mechanics, vol. 53, no. 5, pp. 867-880, 2015, (ACL). Links @article{rubi2015a,
title = {Effect of laser shock peening and cold expansion on fatigue performance of open hole samples},
author = {C Rubio-Gonzalez and G Gomez-Rosas and R Ruiz and Moussa Nait-Abdelaziz and Abdelwaheb Amrouche},
doi = {DOI:10.12989/sem.2015.53.5.867},
year = {2015},
date = {2015-01-01},
journal = {Structural Engineering and Mechanics},
volume = {53},
number = {5},
pages = {867-880},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Conference ER3 Auteurs : Ziraoui, Hichem; Kanit, Toufik; Amrouche, Abdelwaheb; Naït-Abdelaziz, Moussa Fretting-fatigue simulation of polycrystalline aluminium alloy using crystal plasticity finite element method International Conference on mechanics of complex solids and fluids, Lille, 2015, (ACTI). @conference{zira2015,
title = {Fretting-fatigue simulation of polycrystalline aluminium alloy using crystal plasticity finite element method},
author = {Hichem Ziraoui and Toufik Kanit and Abdelwaheb Amrouche and Moussa Naït-Abdelaziz},
year = {2015},
date = {2015-01-01},
booktitle = {International Conference on mechanics of complex solids and fluids},
address = {Lille},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2015Proceedings Article ER3 Auteurs : Dairou, Mariam Mohaman; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina; Gotteland, Philippe Caractérisation en laboratoire de l'enfoncement d'une cage d'armatures dans le béton frais In: Rencontres Universitaires de Génie Civil, 2015, (ACTN). @inproceedings{dairou2015caracterisation,
title = {Caractérisation en laboratoire de l'enfoncement d'une cage d'armatures dans le béton frais},
author = {Mariam Mohaman Dairou and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada and Philippe Gotteland},
year = {2015},
date = {2015-01-01},
booktitle = {Rencontres Universitaires de Génie Civil},
note = {ACTN},
keywords = {ER3},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2015Journal Article ER3 Auteurs : Xing, Zhi; Djelal-Dantec, Chafika; Vanhove, Yannick; Kada, Hassina Wood waste in concrete blocks made by vibrocompression In: Environmental Processes, vol. 2, no. 1, pp. 223–232, 2015, (ACL). @article{xing2015wood,
title = {Wood waste in concrete blocks made by vibrocompression},
author = {Zhi Xing and Chafika Djelal-Dantec and Yannick Vanhove and Hassina Kada},
year = {2015},
date = {2015-01-01},
journal = {Environmental Processes},
volume = {2},
number = {1},
pages = {223--232},
publisher = {Springer},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Journal Article ER3 Auteurs : Goudjil, N; Djelal-Dantec, Chafika; Vanhove, Yannick; Kada, Hassina; Heloun, N Impact of temperature on the demoulding of concrete elements with a polarization process In: Construction and Building Materials, vol. 54, pp. 402–412, 2014, (ACL). Links @article{Goudjil2014,
title = {Impact of temperature on the demoulding of concrete elements with a polarization process},
author = {N Goudjil and Chafika Djelal-Dantec and Yannick Vanhove and Hassina Kada and N Heloun},
doi = {10.1016/j.conbuildmat.2013.12.034},
year = {2014},
date = {2014-03-01},
journal = {Construction and Building Materials},
volume = {54},
pages = {402--412},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Journal Article ER3 Auteurs : Alatorre, N; Ambriz, Ricardo Raphael; Noureddine, B; Amrouche, Abdelwaheb; Talha, Abderrahim; Jaramillo, D Tensile Properties and Fusion Zone Hardening for GMAW and MIEA Welds of a 7075-T651 Aluminum Alloy In: Acta Metallurgica Sinica, vol. 27, pp. 694-704, 2014, (ACL). Links @article{alat2014,
title = {Tensile Properties and Fusion Zone Hardening for GMAW and MIEA Welds of a 7075-T651 Aluminum Alloy},
author = {N Alatorre and Ricardo Raphael Ambriz and B Noureddine and Abdelwaheb Amrouche and Abderrahim Talha and D Jaramillo},
doi = {DOI:10.1007/s40195-014-0103-x},
year = {2014},
date = {2014-01-01},
journal = {Acta Metallurgica Sinica},
volume = {27},
pages = {694-704},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Journal Article ER3 Auteurs : Belloula, Amar; Nait-Abdelaziz, Moussa; Amrouche, Abdelwaheb; Benseddiq, Noureddine Comparison of the cracking energy density and the SmithWatsonTopper parameters in predicting fretting fatigue lifetime of a steel/aluminum alloy contact In: International Journal of Fatigue and Fracture of Engineering Materials and Structures, vol. 37, no. 12, pp. 1355-1366, 2014, (ACL). Links @article{bell2014,
title = {Comparison of the cracking energy density and the SmithWatsonTopper parameters in predicting fretting fatigue lifetime of a steel/aluminum alloy contact},
author = {Amar Belloula and Moussa Nait-Abdelaziz and Abdelwaheb Amrouche and Noureddine Benseddiq},
doi = {DOI:10.1111/ffe.12252},
year = {2014},
date = {2014-01-01},
journal = {International Journal of Fatigue and Fracture of Engineering Materials and Structures},
volume = {37},
number = {12},
pages = {1355-1366},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Book ER3 Auteurs : Benhamena, A; Aminallah, A; Baltach, L; Aid, A; Benguediab, Mohamed; Amrouche, Abdelwaheb; Benseddiq, Noureddine The fretting fatigue behavior of bolted assemblies Design and Computation of Modern Engineering Materials Advances Structured Materials, 2014, (OS). @book{benh2014,
title = {The fretting fatigue behavior of bolted assemblies Design and Computation of Modern Engineering Materials},
author = {A Benhamena and A Aminallah and L Baltach and A Aid and Mohamed Benguediab and Abdelwaheb Amrouche and Noureddine Benseddiq},
editor = {Springer},
year = {2014},
date = {2014-01-01},
publisher = {Advances Structured Materials},
note = {OS},
keywords = {ER3},
pubstate = {published},
tppubtype = {book}
}
|
2014Journal Article ER3 Auteurs : Viveros, K C; Ambriz, R R; Amrouche, Abdelwaheb; Talha, Abderrahim; García, C; Jaramillo, D Cold hole expansion effect on the fatigue crack growth in welds of a 6061-T6 aluminum alloy In: Journal of Materials Processing Technology, vol. 214, no. 11, pp. 26062616, 2014, (ACL). Links @article{vive2014,
title = {Cold hole expansion effect on the fatigue crack growth in welds of a 6061-T6 aluminum alloy},
author = {K C Viveros and R R Ambriz and Abdelwaheb Amrouche and Abderrahim Talha and C García and D Jaramillo},
doi = {DOI:10.1016/j.jmatprotec.2014.05.030},
year = {2014},
date = {2014-01-01},
journal = {Journal of Materials Processing Technology},
volume = {214},
number = {11},
pages = {26062616},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Journal Article ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; de Caro, Pascale Influence of the type of release oil on steel formwork corrosion and facing aesthetics In: Construction and Building Materials, vol. 68, pp. 391 - 401, 2014, ISSN: 0950-0618, (ACL). Abstract | Links @article{LIBESSART2014391,
title = {Influence of the type of release oil on steel formwork corrosion and facing aesthetics},
author = {Laurent Libessart and Chafika Djelal-Dantec and Pascale de Caro},
url = {http://www.sciencedirect.com/science/article/pii/S0950061814006849},
doi = {https://doi.org/10.1016/j.conbuildmat.2014.06.065},
issn = {0950-0618},
year = {2014},
date = {2014-01-01},
journal = {Construction and Building Materials},
volume = {68},
pages = {391 - 401},
abstract = {The quality of the concrete facings results from the implementation of release agents and the casing surface quality. It is interesting to characterize the behaviour of release agents over the lifetime of the formwork. This study is based on the many ones test physicochemical and esthetics realized on two types of surface of formwork like on three types of applications. In complement, the ageing of the casing formwork was characterized by electrochemical spectroscopy of impedance and thanks to the correlation with the aesthetic tests will allow to find from new mechanisms to the interfaces related to the studied oil’s formulations.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
The quality of the concrete facings results from the implementation of release agents and the casing surface quality. It is interesting to characterize the behaviour of release agents over the lifetime of the formwork. This study is based on the many ones test physicochemical and esthetics realized on two types of surface of formwork like on three types of applications. In complement, the ageing of the casing formwork was characterized by electrochemical spectroscopy of impedance and thanks to the correlation with the aesthetic tests will allow to find from new mechanisms to the interfaces related to the studied oil’s formulations. |
2013Conference ER3 Auteurs : Belloula, Amar; Amrouche, Abdelwaheb; Nait-Abdelaziz, Moussa; Benseddiq, Noureddine A study on fretting fatigue crack nucleation in 6082-T6 aluminium alloys 7th International Symposium on Fretting Fatigue, Oxford, 2013, (ACTI). @conference{bell2013c,
title = {A study on fretting fatigue crack nucleation in 6082-T6 aluminium alloys},
author = {Amar Belloula and Abdelwaheb Amrouche and Moussa Nait-Abdelaziz and Noureddine Benseddiq},
year = {2013},
date = {2013-04-01},
booktitle = {7th International Symposium on Fretting Fatigue},
address = {Oxford},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2013Journal Article ER3 Auteurs : Bal, L; Buyle-Bodin, Francois Artificial Neural Network for Predicting Đrying Shrinkage of Concrete,Construction and Building Materials, (2013), pp. 248-254 In: 2013, (ACL). @article{bal2013ac,
title = {Artificial Neural Network for Predicting Đrying Shrinkage of Concrete,Construction and Building Materials, (2013), pp. 248-254},
author = {L Bal and Francois Buyle-Bodin},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2013Journal Article ER3 Auteurs : Djebli, A; Aid, A; Bendouba, M; Amrouche, Abdelwaheb; Benguediab, M; Benseddiq, N A non-linear energy model of fatigue damage accumulation and its verification for Al-2024 aluminum alloy. International Journal of Non-Linear Mechanics. Vol 51, pp 145â151, 201 In: 2013, (ACL). @article{djeb2013,
title = {A non-linear energy model of fatigue damage accumulation and its verification for Al-2024 aluminum alloy. International Journal of Non-Linear Mechanics. Vol 51, pp 145â151, 201},
author = {A Djebli and A Aid and M Bendouba and Abdelwaheb Amrouche and M Benguediab and N Benseddiq},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2013Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick Influence of superplaticizien on the properties of the concrete / oil / forarwork interface Construction and Building materials In: 2013, (ACL). @article{djel2013,
title = {Influence of superplaticizien on the properties of the concrete / oil / forarwork interface Construction and Building materials},
author = {Chafika Djelal-Dantec and Yannick Vanhove},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2013Conference ER3 Auteurs : Belloula, Amar; Amrouche, Abdelwaheb; Nait-Abdelaziz, Moussa; Benseddiq, Noureddine Application of the Cracking Energy Density (CED) multiaxial fatigue criteria for fretting fatigue life prediction: case of mono-contact steel/Al 10th International Conference on MulmtiaxialFatigue and Fracture, Kyoto (Japan), 2013, (ACTI). @conference{bell2013,
title = {Application of the Cracking Energy Density (CED) multiaxial fatigue criteria for fretting fatigue life prediction: case of mono-contact steel/Al},
author = {Amar Belloula and Abdelwaheb Amrouche and Moussa Nait-Abdelaziz and Noureddine Benseddiq},
year = {2013},
date = {2013-01-01},
booktitle = {10th International Conference on MulmtiaxialFatigue and Fracture},
address = {Kyoto (Japan)},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2013Journal Article ER3 Auteurs : Hemmouche, L; Chicot, D; Amrouche, Abdelwaheb; Iost, Alain; Belouchrani, M A; Decoopman, Xavier; Louis, Ghislain; Puchi-Cabrera, E S An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques In: Materials Science and Engineering: A, vol. 585, pp. 155 - 164, 2013, ISSN: 0921-5093, (ACL). Links @article{hemm2013,
title = {An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques},
author = {L Hemmouche and D Chicot and Abdelwaheb Amrouche and Alain Iost and M A Belouchrani and Xavier Decoopman and Ghislain Louis and E S Puchi-Cabrera},
url = {http://www.sciencedirect.com/science/article/pii/S092150931300823X},
doi = {http://dx.doi.org/10.1016/j.msea.2013.07.054},
issn = {0921-5093},
year = {2013},
date = {2013-01-01},
journal = {Materials Science and Engineering: A},
volume = {585},
pages = {155 - 164},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2013Journal Article ER3 Auteurs : Miloudi, Abdelkader; Zemri, Mokhtar; Benguediab, Mohamed; Mazari, Mohamed; Amrouche, Abdelwaheb Crack Propagation under Variable Amplitude Loading In: Materials Research, vol. 16, no. 5, pp. 1161-1168, 2013, (ACL). Links @article{milo2013,
title = {Crack Propagation under Variable Amplitude Loading},
author = {Abdelkader Miloudi and Mokhtar Zemri and Mohamed Benguediab and Mohamed Mazari and Abdelwaheb Amrouche},
doi = {DOI:10.1590/S1516-14392013005000110},
year = {2013},
date = {2013-01-01},
journal = {Materials Research},
volume = {16},
number = {5},
pages = {1161-1168},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Aid, Abdelkrim; BENDOUBA, M; AMINALLAH, L; Amrouche, Abdelwaheb; BENSEDDIQ, N; BENGUEDIAD, M An equivalent stress process for fatigue life estimation under multiaxialloadings based on a new non linear damage model. Materials Scienceand Engineering A, 538, pp 20 ^aÂÂ 27. 201 In: 2012, (ACL). @article{aid2012,
title = {An equivalent stress process for fatigue life estimation under multiaxialloadings based on a new non linear damage model. Materials Scienceand Engineering A, 538, pp 20 ^aÂÂ 27. 201},
author = {Abdelkrim Aid and M BENDOUBA and L AMINALLAH and Abdelwaheb Amrouche and N BENSEDDIQ and M BENGUEDIAD},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : BENHAMENA, A; Amrouche, Abdelwaheb; TALHA, A; BENSEDDIQ, N Effect of contact forces on fretting fatigue behavior of bolted plates:Numerical and experimental analysis. Ŧribology International. Vol48, pp 237 a 245. 2012. In: 2012, (ACL). @article{benh2012a,
title = {Effect of contact forces on fretting fatigue behavior of bolted plates:Numerical and experimental analysis. Ŧribology International. Vol48, pp 237 a 245. 2012.},
author = {A BENHAMENA and Abdelwaheb Amrouche and A TALHA and N BENSEDDIQ},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Goudjil, N; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina Electro-osmosis applied for formwork removal of concrete, Journalof Advanced Concrete Ŧechnology, Vol. 10, 2012, p.301-312. In: 2012, (ACL). @article{goud2012a,
title = {Electro-osmosis applied for formwork removal of concrete, Journalof Advanced Concrete Ŧechnology, Vol. 10, 2012, p.301-312.},
author = {N Goudjil and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Haddi, Abdelkader; IMAD, A; VEGA, G Ŧhe influence of the drawing parameters and temperature rise on theprediction of chevron crack formation in wire drawing, InternationalJournal of Fracture, 176:171^aÂÂ18 In: 2012, (ACL). @article{hadd2012,
title = {Ŧhe influence of the drawing parameters and temperature rise on theprediction of chevron crack formation in wire drawing, InternationalJournal of Fracture, 176:171^aÂÂ18},
author = {Abdelkader Haddi and A IMAD and G VEGA},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Haddi, Abdelkader; IMAD, A; VEGA, G On the Analysis of Đie Wear in Wire-Đrawing Process, Ŧribology Ŧransactions,55:4, 466-472 2012. In: 2012, (ACL). @article{hadd2012a,
title = {On the Analysis of Đie Wear in Wire-Đrawing Process, Ŧribology Ŧransactions,55:4, 466-472 2012.},
author = {Abdelkader Haddi and A IMAD and G VEGA},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Kesteloot, Stéphan; SAADE, M; Djelal-Dantec, Chafika; BENSLIMANE, I; KHOUFACHE, N Utilisation de materiaux composites pour la rehabilitation des ouvragesd assainissement en meuliere, Annales du BTP n 1-2, p. 15-24,Mars 2012 In: 2012, (ACL). @article{kest2012,
title = {Utilisation de materiaux composites pour la rehabilitation des ouvragesd assainissement en meuliere, Annales du BTP n 1-2, p. 15-24,Mars 2012},
author = {Stéphan Kesteloot and M SAADE and Chafika Djelal-Dantec and I BENSLIMANE and N KHOUFACHE},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Semari, Z; Aid, A; Benhamena, A; Amrouche, Abdelwaheb; Benguediab, M; Sadok, A Effect of Residual Stresses Induced by Cold Expansion on the CrackGrowth in 6082 Aluminum Alloy. Engineering Fracture Mechanics. InPress, Accepted Manuscript, Available online 12 Đecember 2012. In: 2012, (ACL). @article{Sema2012,
title = {Effect of Residual Stresses Induced by Cold Expansion on the CrackGrowth in 6082 Aluminum Alloy. Engineering Fracture Mechanics. InPress, Accepted Manuscript, Available online 12 Đecember 2012.},
author = {Z Semari and A Aid and A Benhamena and Abdelwaheb Amrouche and M Benguediab and A Sadok},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; SCHWENDENMANN, G; BRISSET, P Study of Self Consolidating Concrete stability during their placement,Construction and Building Materials, Vol. 35, 2012, p. 101-108. In: 2012, (ACL). @article{vanh2012a,
title = {Study of Self Consolidating Concrete stability during their placement,Construction and Building Materials, Vol. 35, 2012, p. 101-108.},
author = {Yannick Vanhove and Chafika Djelal-Dantec and G SCHWENDENMANN and P BRISSET},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Journal Article ER3 Auteurs : Aid, Abdelkrim; Amrouche, Abdelwaheb; BOUIADJRA, B B; BENGUEDIAB, M; MESMACQUE, G Fatigue life prediction under variable loading based on a new damagemodel. In: Materials and Đesign, vol. 32, no. 1, pp. 183-191, 2011, (ACL). @article{aid2011,
title = {Fatigue life prediction under variable loading based on a new damagemodel.},
author = {Abdelkrim Aid and Abdelwaheb Amrouche and B B BOUIADJRA and M BENGUEDIAB and G MESMACQUE},
year = {2011},
date = {2011-01-01},
journal = {Materials and Đesign},
volume = {32},
number = {1},
pages = {183-191},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Journal Article ER3 Auteurs : BENHAMENA, A; AMINALLAH, L; BOUIADJRA, B B; BENGUEDIAB, M; Amrouche, Abdelwaheb; BENSEDDIQ, N J integral solution for semi-elliptical surface crack in high densitypoly-ethylene pipe under bending. Materials and Đesign 32 (5),pp. 2561-2569. 2011. In: 2011, (ACL). @article{benh2011,
title = {J integral solution for semi-elliptical surface crack in high densitypoly-ethylene pipe under bending. Materials and Đesign 32 (5),pp. 2561-2569. 2011.},
author = {A BENHAMENA and L AMINALLAH and B B BOUIADJRA and M BENGUEDIAB and Abdelwaheb Amrouche and N BENSEDDIQ},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Journal Article ER3 Auteurs : Guechichi, H; Benkabouche, S; Amrouche, Abdelwaheb; Benkhettab, M A high fatigue life prediction methodology under constant amplitudemultiaxial proportional loadings. Materials Science and EngineeringA 528 (13-14), pp. 4789-4798. 2011. In: 2011, (ACL). @article{guer2011a,
title = {A high fatigue life prediction methodology under constant amplitudemultiaxial proportional loadings. Materials Science and EngineeringA 528 (13-14), pp. 4789-4798. 2011.},
author = {H Guechichi and S Benkabouche and Abdelwaheb Amrouche and M Benkhettab},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Journal Article ER3 Auteurs : Haddi, Abdelkader; IMAD, A; VEGA, G Analysis of temperature and speed effects on the drawing stress forimproving the wire drawing process, Materials and Đesign 32, 4310-ÂÂ431 In: 2011, (ACL). @article{hadd2011,
title = {Analysis of temperature and speed effects on the drawing stress forimproving the wire drawing process, Materials and Đesign 32, 4310-ÂÂ431},
author = {Abdelkader Haddi and A IMAD and G VEGA},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Journal Article ER3 Auteurs : Kesteloot, Stéphan; Djelal-Dantec, Chafika; BENSLIMANE, I; BARAKA, S Strengthening of Sewerage Systems with Composites Plates: Numerical,Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16 In: 2011, (ACL). @article{kest2011,
title = {Strengthening of Sewerage Systems with Composites Plates: Numerical,Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16},
author = {Stéphan Kesteloot and Chafika Djelal-Dantec and I BENSLIMANE and S BARAKA},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Journal Article ER3 Auteurs : Kesteloot, Stéphan; Djelal-Dantec, Chafika; Benslimane, I; Baraka, S Strengthening of Sewerage Systems with Composites Plates: Numerical, Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16 In: 2011, (ACL). @article{kest2011a,
title = {Strengthening of Sewerage Systems with Composites Plates: Numerical, Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16},
author = {Stéphan Kesteloot and Chafika Djelal-Dantec and I Benslimane and S Baraka},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER3 Auteurs : Ambriz, R R; Mesmacque, G; Ruiz, A; Amrouche, Abdelwaheb; Lopez, V H Effect of the welding profile generated by the modified indirect electric arc technique on the fatigue behavior of 6061-Ŧ6 aluminum alloy. Materials Science and Engineering A ,527 (7-8), pp. 2057-2064. In: 2010, (ACL). @article{ambr2010,
title = {Effect of the welding profile generated by the modified indirect electric arc technique on the fatigue behavior of 6061-Ŧ6 aluminum alloy. Materials Science and Engineering A ,527 (7-8), pp. 2057-2064.},
author = {R R Ambriz and G Mesmacque and A Ruiz and Abdelwaheb Amrouche and V H Lopez},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER3 Auteurs : AMBRIZ, R R; MESMACQUE, G; RUIZ, A; Amrouche, Abdelwaheb; LOPEZ, V H; BENSEDDIQ, N Fatigue crack growth under a constant amplitude loading of Al-6061-Ŧ6welds obtained by modified indirect electric arc technique. Scienceand Ŧechnology of Welding and Joining. Volume: 15, Issue: 6. pp 514-521.2010. In: 2010, (ACL). @article{ambr2010a,
title = {Fatigue crack growth under a constant amplitude loading of Al-6061-Ŧ6welds obtained by modified indirect electric arc technique. Scienceand Ŧechnology of Welding and Joining. Volume: 15, Issue: 6. pp 514-521.2010.},
author = {R R AMBRIZ and G MESMACQUE and A RUIZ and Abdelwaheb Amrouche and V H LOPEZ and N BENSEDDIQ},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER3 Auteurs : AMINALLAH, L; MESMACQUE, G; SERIER, B; Amrouche, Abdelwaheb; BENSEDDIQ, N J integral computation for cracks in polypropylene pipes under internal pressure. Key Engineering Materials 417-418, pp. 453-456. 2010 In: 2010, (ACL). @article{amin2010a,
title = {J integral computation for cracks in polypropylene pipes under internal pressure. Key Engineering Materials 417-418, pp. 453-456. 2010},
author = {L AMINALLAH and G MESMACQUE and B SERIER and Abdelwaheb Amrouche and N BENSEDDIQ},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER3 Auteurs : BENHAMENA, A; BOUIADJRA, BACHIR B; Amrouche, Abdelwaheb; MESMACQUE, G; BENSEDDIQ, N; BENGUEDIAB, M Ŧhree finite element analysis of semi-elliptical crack in high densitypoly-ethylene pipe subjected to internal pressure. Materials anḌesign 31 (6), pp. 3038-3043. 2010. In: 2010, (ACL). @article{benh2010a,
title = {Ŧhree finite element analysis of semi-elliptical crack in high densitypoly-ethylene pipe subjected to internal pressure. Materials anḌesign 31 (6), pp. 3038-3043. 2010.},
author = {A BENHAMENA and BACHIR B BOUIADJRA and Abdelwaheb Amrouche and G MESMACQUE and N BENSEDDIQ and M BENGUEDIAB},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER3 Auteurs : BENHAMENA, A; TALHA, A; BENSEDDIQ, N; Amrouche, Abdelwaheb; MESMACQUE, G; BENGUEDIAB, M Effect of clamping force on fretting fatigue behaviour of boltedassemblies: Case of couple steel-aluminium. Materials Science andEngineering A 527 (23), pp. 6413-6421. 2010. In: 2010, (ACL). @article{benh2010b,
title = {Effect of clamping force on fretting fatigue behaviour of boltedassemblies: Case of couple steel-aluminium. Materials Science andEngineering A 527 (23), pp. 6413-6421. 2010.},
author = {A BENHAMENA and A TALHA and N BENSEDDIQ and Abdelwaheb Amrouche and G MESMACQUE and M BENGUEDIAB},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER3 Auteurs : Cadenas-Herrera, P; Amrouche, Abdelwaheb; Mesmacque, G; Jozwiak, K; Puchi-cabrera,; Eli, S Influence of residual fatigue damage on the fracture toughness parametersof an AA6082-Ŧ6 aluminum alloy. International Journal of Fatigueand Fractures of Engineering Materials and Structures. 33 (1), pp.54-65. 2010. In: 2010, (ACL). @article{cade2010,
title = {Influence of residual fatigue damage on the fracture toughness parametersof an AA6082-Ŧ6 aluminum alloy. International Journal of Fatigueand Fractures of Engineering Materials and Structures. 33 (1), pp.54-65. 2010.},
author = {P Cadenas-Herrera and Abdelwaheb Amrouche and G Mesmacque and K Jozwiak and Puchi-cabrera and S Eli},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; CHAMBELLAN, D; BRISSET, P Influence of the thickness of demoulding oils on the aesthetic qualityof facings, Materials and Structures, Vol. 43, N°5, June 2010, p.687-698 In: 2010, (ACL). @article{djel2010,
title = {Influence of the thickness of demoulding oils on the aesthetic qualityof facings, Materials and Structures, Vol. 43, N°5, June 2010, p.687-698},
author = {Chafika Djelal-Dantec and Yannick Vanhove and D CHAMBELLAN and P BRISSET},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER3 Auteurs : Kesteloot, Stéphan; Djelal-Dantec, Chafika; BENSLIMANE, I; KHOUFACHE, N Stengthening of masonry arches using carbon plates, Constructionand Building Materials In: 2010, (ACL). @article{kest2010,
title = {Stengthening of masonry arches using carbon plates, Constructionand Building Materials},
author = {Stéphan Kesteloot and Chafika Djelal-Dantec and I BENSLIMANE and N KHOUFACHE},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2009Journal Article ER3 Auteurs : Aminallah, L; Achour, T; Bouiadjra, B Bachir; Serier, B; Amrouche, Abdelwaheb; Feaugas,; Benssediq, N Analysis of the distribution of thermal residual stresses in bonded composite repair of metallic aircraft structures. Computational Materials Science, 46 (4), pp. 1023-1027. 2009. In: 2009, (ACL). @article{amin2009a,
title = {Analysis of the distribution of thermal residual stresses in bonded composite repair of metallic aircraft structures. Computational Materials Science, 46 (4), pp. 1023-1027. 2009.},
author = {L Aminallah and T Achour and B Bachir Bouiadjra and B Serier and Abdelwaheb Amrouche and Feaugas and N Benssediq},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2009Journal Article ER3 Auteurs : Guillaume, Vega; Haddi, Abdelkader; Abdellatif, Imad Temperature effects on wire drawing process : experimental investigation In: International journal of material forming, vol. 2, no. 1, pp. 229-232, 2009, ISSN: 1960-6214, (ACL). Links @article{,
title = {Temperature effects on wire drawing process : experimental investigation},
author = {Vega Guillaume and Abdelkader Haddi and Imad Abdellatif},
url = {https://link.springer.com/article/10.1007/s12289-009-0468-y#citeas},
doi = {https://doi.org/10.1007/s12289-009-0468-y},
issn = {1960-6214},
year = {2009},
date = {2009-01-01},
journal = {International journal of material forming},
volume = {2},
number = {1},
pages = {229-232},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2009Journal Article ER3 Auteurs : SANCHEZ-SANTANA, U; RUBIO-GONZALEZ, C; MESMACQUE, G; Amrouche, Abdelwaheb Effect of fatigue damage on the dynamic tensile behavior of aluminiumalloy 6061-Ŧ6 and AISI 4140 Ŧ steel. International Journal of Fatigue.31 (11-12), pp. 1928-1937 .2009. In: 2009, (ACL). @article{sanc2009,
title = {Effect of fatigue damage on the dynamic tensile behavior of aluminiumalloy 6061-Ŧ6 and AISI 4140 Ŧ steel. International Journal of Fatigue.31 (11-12), pp. 1928-1937 .2009.},
author = {U SANCHEZ-SANTANA and C RUBIO-GONZALEZ and G MESMACQUE and Abdelwaheb Amrouche},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2009Journal Article ER3 Auteurs : Véga, Guillaume; Haddi, Abdelkader; Imad, Abdellatif Investigation of process parameters effect on the copper-wire drawing In: Materials and Đesign, vol. 30, pp. 3308-3312., 2009, (ACL). @article{vega2009,
title = {Investigation of process parameters effect on the copper-wire drawing},
author = {Guillaume Véga and Abdelkader Haddi and Abdellatif Imad},
year = {2009},
date = {2009-01-01},
journal = {Materials and Đesign},
volume = {30},
pages = {3308-3312.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : Amrouche, Abdelwaheb; SU, M; AID, A; MESMACQUE, G Numerical study of the optimum degree of cold expansion: Applicationfor the pre-cracked specimen with the expanded hole at the cracktip. Journal of Materials Processing Ŧechnology, 197, pp 250-254,2008. In: 2008, (ACL). @article{amro2008,
title = {Numerical study of the optimum degree of cold expansion: Applicationfor the pre-cracked specimen with the expanded hole at the cracktip. Journal of Materials Processing Ŧechnology, 197, pp 250-254,2008.},
author = {Abdelwaheb Amrouche and M SU and A AID and G MESMACQUE},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Caro, P De; Libessart, Laurent; Dubois, I; Pebere, N Comprehension of demoulding mechanics at the formwork/oil/concreteinterface , Materials and Structure, 41, n3 571-581, April 2008 In: 2008, (ACL). @article{djel2008,
title = {Comprehension of demoulding mechanics at the formwork/oil/concreteinterface , Materials and Structure, 41, n3 571-581, April 2008},
author = {Chafika Djelal-Dantec and P De Caro and Laurent Libessart and I Dubois and N Pebere},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; Kesteloot, Stéphan; HELOUN, N Ultrasonic wave reflection approach to evaluate fresh concrete friction,Journal of Advanced Concrete Ŧechnology, Vol. 6, N°2, june 2008,p.1- In: 2008, (ACL). @article{djel2008a,
title = {Ultrasonic wave reflection approach to evaluate fresh concrete friction,Journal of Advanced Concrete Ŧechnology, Vol. 6, N°2, june 2008,p.1-},
author = {Chafika Djelal-Dantec and Yannick Vanhove and Stéphan Kesteloot and N HELOUN},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; Kesteloot, Stéphan; HELOUN, N Effet de la nature des huiles de demoulage et de la corrosion desparois des coffrages sur l Âesthetique des parements Annalesdu Batiment et des Ŧravaux Publics, N°2, 2008, p.6- In: 2008, (ACL). @article{djel2008b,
title = {Effet de la nature des huiles de demoulage et de la corrosion desparois des coffrages sur l Âesthetique des parements Annalesdu Batiment et des Ŧravaux Publics, N°2, 2008, p.6-},
author = {Chafika Djelal-Dantec and Yannick Vanhove and Stéphan Kesteloot and N HELOUN},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : Guo, Ran.; DUAN, R; MESMACQUE, G; ZHANG, L; Amrouche, Abdelwaheb; GUO, R Fretting fatigue behavior of riveted Al 6xxx components MaterialsṠcience Engineering A, 483-484, pp 398-401, 2008. In: 2008, (ACL). @article{guo2008a,
title = {Fretting fatigue behavior of riveted Al 6xxx components MaterialsṠcience Engineering A, 483-484, pp 398-401, 2008.},
author = {Ran. Guo and R DUAN and G MESMACQUE and L ZHANG and Abdelwaheb Amrouche and R GUO},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : Guo, Ran; Lin, En. Q.; Duan, R; Mesmacque, G; Amrouche, Abdelwaheb Study of fretting fatigue crack initiation for riveted Al 6xxx components.Advanced Materials Research. Vols.33-37, pp 243-248. 2008. In: 2008, (ACL). @article{guo2008b,
title = {Study of fretting fatigue crack initiation for riveted Al 6xxx components.Advanced Materials Research. Vols.33-37, pp 243-248. 2008.},
author = {Ran Guo and En.Q. Lin and R Duan and G Mesmacque and Abdelwaheb Amrouche},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : SANCHEZ-SANTANA, U; RUBIO-GONZALEZ, C; MESMACQUE, G; Amrouche, Abdelwaheb; DECOOPMAN, X Đynamic tensile behaviour of materials with previous fatigue damageṀaterials Science Engineering A, 497, pp 51-60, 2008. In: 2008, (ACL). @article{sanc2008,
title = {Đynamic tensile behaviour of materials with previous fatigue damageṀaterials Science Engineering A, 497, pp 51-60, 2008.},
author = {U SANCHEZ-SANTANA and C RUBIO-GONZALEZ and G MESMACQUE and Abdelwaheb Amrouche and X DECOOPMAN},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : SANCHEZ-SANTANA, U; RUBIO-GONZALEZ, C; MESMACQUE, G; Amrouche, Abdelwaheb; DECOOPMAN, X Effect of fatigue damage induced by cyclic plasticity on the dynamictensile behavior of materials. International Journal of Fatigue,30, pp 1708-1719, 2008. In: 2008, (ACL). @article{sanc2008a,
title = {Effect of fatigue damage induced by cyclic plasticity on the dynamictensile behavior of materials. International Journal of Fatigue,30, pp 1708-1719, 2008.},
author = {U SANCHEZ-SANTANA and C RUBIO-GONZALEZ and G MESMACQUE and Abdelwaheb Amrouche and X DECOOPMAN},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : Su, M; Amrouche, Abdelwaheb; MESMACQUE, G; BENSEDDIQ, N Numerical study of double cold expansion of the hole at crack tipand the influence on the residual stresses field. ComputationalMaterials Science, 41, pp 350-355, 2008. In: 2008, (ACL). @article{su2008a,
title = {Numerical study of double cold expansion of the hole at crack tipand the influence on the residual stresses field. ComputationalMaterials Science, 41, pp 350-355, 2008.},
author = {M Su and Abdelwaheb Amrouche and G MESMACQUE and N BENSEDDIQ},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Chartier, Thierry Ultrasonic Wave Reflection Approach to Evaluation of Fresh ConcreteFriction In: J. Adv. Concr. Technol., vol. 6, no. 2, pp. 253–260, 2008, ISSN: 1346-8014, (ACL). Abstract | Links @article{vanh2008a,
title = {Ultrasonic Wave Reflection Approach to Evaluation of Fresh ConcreteFriction},
author = {Yannick Vanhove and Chafika Djelal-Dantec and Thierry Chartier},
url = {http://joi.jlc.jst.go.jp/JST.JSTAGE/jact/6.253?from=CrossRef},
doi = {10.3151/jact.6.253},
issn = {1346-8014},
year = {2008},
date = {2008-01-01},
journal = {J. Adv. Concr. Technol.},
volume = {6},
number = {2},
pages = {253--260},
abstract = {The friction of fresh concrete and granular materials against a metallic plate was investigated using ultrasonic wave re- flection. Two complementary experimental devices, one a global device using a tribometer, the other a device based on an ultrasonic reflectometer giving a local approach at the formwork/fresh concrete interface. This approach is based on the evaluation of the density variation of the interface between the metallic wall and the material during the casting process. The authors propose a method to maintain a high impedance contrast by using a water layer interleaved be- tween the transducer and the studied material. Good agreement between the ultrasonic parameter and the friction pa- rameter was observed.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
The friction of fresh concrete and granular materials against a metallic plate was investigated using ultrasonic wave re- flection. Two complementary experimental devices, one a global device using a tribometer, the other a device based on an ultrasonic reflectometer giving a local approach at the formwork/fresh concrete interface. This approach is based on the evaluation of the density variation of the interface between the metallic wall and the material during the casting process. The authors propose a method to maintain a high impedance contrast by using a water layer interleaved be- tween the transducer and the studied material. Good agreement between the ultrasonic parameter and the friction pa- rameter was observed. |
0000Journal Article [No title] In: 0000. @article{nokey,
title = {[No title]},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
|
