2023Journal Article ER3 Auteurs : Feys, Dimitri; Keller, Helena; Cheikh, Khadija El; Secrieru, Egor; Vanhove, Yannick RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-a comprehensive flow curve analysis In: Materials and structures, vol. 56, no. 5, pp. 105, 2023, (ACL). Links @article{feys:hal-04136669,
title = {RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-a comprehensive flow curve analysis},
author = {Dimitri Feys and Helena Keller and Khadija El Cheikh and Egor Secrieru and Yannick Vanhove},
url = {https://hal.science/hal-04136669},
doi = {10.1617/s11527-023-02176-y},
year = {2023},
date = {2023-06-01},
urldate = {2023-06-01},
journal = {Materials and structures},
volume = {56},
number = {5},
pages = {105},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Journal Article ER3 Auteurs : Feys, Dimitri; Sonebi, Mohammed; Amziane, Sofiane; Djelal-Dantec, Chafika; El-Cheikh, Khadija; Fataei, Shirin; Greim, Markus; Ivanova, Irina; Keller, Helena; Khayat, Kamal; Vanhove, Yannick; Libessart, Laurent; Mechtcherine, Viktor; Navarrete, Ivan; Perrot, Arnaud; Secrieru, Egor RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-rheometers, mixtures and procedures In: Materials and structures, vol. 56, no. 4, pp. 90, 2023, (ACL). Links @article{feys:hal-04136704,
title = {RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-rheometers, mixtures and procedures},
author = {Dimitri Feys and Mohammed Sonebi and Sofiane Amziane and Chafika Djelal-Dantec and Khadija El-Cheikh and Shirin Fataei and Markus Greim and Irina Ivanova and Helena Keller and Kamal Khayat and Yannick Vanhove and Laurent Libessart and Viktor Mechtcherine and Ivan Navarrete and Arnaud Perrot and Egor Secrieru},
url = {https://hal.science/hal-04136704},
doi = {10.1617/s11527-023-02173-1},
year = {2023},
date = {2023-05-01},
urldate = {2023-05-01},
journal = {Materials and structures},
volume = {56},
number = {4},
pages = {90},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2023Book Section ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Kim, J. H; Tilo, Proske Formwork technology, interface conditions and friction behaviour In: Measuring rheological properties of cement-based materials, pp. Chapitre 5, 2023, (OS). Links @incollection{vanhove:hal-04356419,
title = {Formwork technology, interface conditions and friction behaviour},
author = {Yannick Vanhove and Chafika Djelal-Dantec and J. H Kim and Proske Tilo},
url = {https://univ-artois.hal.science/hal-04356419},
year = {2023},
date = {2023-01-01},
urldate = {2023-01-01},
booktitle = {Measuring rheological properties of cement-based materials},
pages = {Chapitre 5},
note = {OS},
keywords = {ER3},
pubstate = {published},
tppubtype = {incollection}
}
|
2023Book Section ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Libessart, Laurent; Tilo, Proske; Secrieru, Egor; Feys, Dimitri State of knowledge of interface rheometry In: Measuring rheological properties of cement-based materials, Report of RILEM Technical committee 266 MRP, pp. Chapitre 7, 2023, (OS). Links @incollection{vanhove:hal-04356443,
title = {State of knowledge of interface rheometry},
author = {Yannick Vanhove and Chafika Djelal-Dantec and Laurent Libessart and Proske Tilo and Egor Secrieru and Dimitri Feys},
url = {https://univ-artois.hal.science/hal-04356443},
year = {2023},
date = {2023-10-01},
urldate = {2023-10-01},
booktitle = {Measuring rheological properties of cement-based materials, Report of RILEM Technical committee 266 MRP},
pages = {Chapitre 7},
note = {OS},
keywords = {ER3},
pubstate = {published},
tppubtype = {incollection}
}
|
2021Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Influence of the formwork removal by polarization on the facing aesthetics in reinforced concrete In: Construction and Building Materials, vol. 284, pp. 122841, 2021. Links @article{Vanhove2021,
title = {Influence of the formwork removal by polarization on the facing aesthetics in reinforced concrete},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
doi = {10.1016/j.conbuildmat.2021.122841},
year = {2021},
date = {2021-05-01},
journal = {Construction and Building Materials},
volume = {284},
pages = {122841},
publisher = {Elsevier BV},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Zein, Abdul Rahman El; Vanhove, Yannick; Djelal-Dantec, Chafika; Madec, Olivier; Gotteland, Philippe Evaluation of internal bleeding in concrete foundation from the Terzaghi's effective stress postulate In: Materials and structures, vol. 54, no. 6, pp. 231, 2021, (ACL). Links @article{elzein:hal-03770517,
title = {Evaluation of internal bleeding in concrete foundation from the Terzaghi's effective stress postulate},
author = {Abdul Rahman El Zein and Yannick Vanhove and Chafika Djelal-Dantec and Olivier Madec and Philippe Gotteland},
url = {https://hal.archives-ouvertes.fr/hal-03770517},
doi = {10.1617/s11527-021-01828-1},
year = {2021},
date = {2021-12-01},
urldate = {2021-12-01},
journal = {Materials and structures},
volume = {54},
number = {6},
pages = {231},
publisher = {Springer Verlag},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2021Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Magnin, A. Testing and Modeling of Reinforcement Cage Penetration Capacity from Concrete Rheometer Results In: Materials Journal, vol. 118, no. 6, 2021, (ACL). Links @article{vanhove:hal-04440561,
title = {Testing and Modeling of Reinforcement Cage Penetration Capacity from Concrete Rheometer Results},
author = {Yannick Vanhove and Chafika Djelal-Dantec and A. Magnin},
url = {https://univ-artois.hal.science/hal-04440561},
doi = {10.14359/51734153},
year = {2021},
date = {2021-11-01},
urldate = {2021-11-01},
journal = {Materials Journal},
volume = {118},
number = {6},
publisher = {American Concrete Institute},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; Azzi, Amin; Madec, Olivier Recommendation for concrete mix design to prevent bleed channels on diaphragm walls In: European Journal of Environmental and Civil Engineering, vol. 0, no. 0, pp. 1-13, 2020, (ACL). Links @article{Djelalvanhove2020,
title = {Recommendation for concrete mix design to prevent bleed channels on diaphragm walls},
author = {Chafika Djelal-Dantec and Yannick Vanhove and Amin Azzi and Olivier Madec},
url = {https://doi.org/10.1080/19648189.2020.1713900},
doi = {10.1080/19648189.2020.1713900},
year = {2020},
date = {2020-01-01},
journal = {European Journal of Environmental and Civil Engineering},
volume = {0},
number = {0},
pages = {1-13},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Page, Jonathan; Kada, Hassina; Vanhove, Yannick Feasibility study of using poplar wastes as sand in cement mortars In: Journal of Material Cycles and Waste Management, vol. 22, no. 2, pp. 488–500, 2020, ISBN: 1611-8227, (ACL). Abstract | Links @article{DjelalPage2019,
title = {Feasibility study of using poplar wastes as sand in cement mortars},
author = {Chafika Djelal-Dantec and Jonathan Page and Hassina Kada and Yannick Vanhove},
url = {https://doi.org/10.1007/s10163-019-00946-x},
doi = {10.1007/s10163-019-00946-x},
isbn = {1611-8227},
year = {2020},
date = {2020-01-01},
journal = {Journal of Material Cycles and Waste Management},
volume = {22},
number = {2},
pages = {488--500},
abstract = {An experimental investigation was undertaken to evaluate the potential use of poplar by-products in cement mortars. Two by-products from poplar processing were studied: sawdust (from sawing wood) and milled fibres (from wood waste obtained during cutting). Poplar fibres and sawdust were incorporated into mortars as sand volume substitution with rates ranging from 0 to 100%. Before introduction into the mortar, poplar aggregates were characterized (morphology and water absorption). It appeared that these wood aggregates absorb very quickly a large amount of water (up to 200%). The introduction of these poplar by-products has significant effects on the composite properties in both fresh and hardened states. It was noted that the workability of the mixtures with the poplar wood varies with the substitution rate. The inhibition of cement setting with poplar sawdust is characterized by maturity tests and affects the mechanical properties of mortars. In addition, increasing the poplar aggregates content causes a continuous increase of the material porosity, which leads to a decrease in density. Besides, it appears that the incorporation of poplar aggregates into mortars also decrease their thermal conductivities, which would help to reduce building heat losses. A significant decrease in the mechanical properties of poplar-based mortars was also noted, related to the rate of fibres or sawdust introduced into mixtures. The hydration disturbances, the high internal porosity of the wood particles and their low density can explain these lower mechanical strengths. However, despite these disturbances, the valorisation of poplar wood by-products remains possible in cementitious materials for the manufacture of concrete masonry blocks.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
An experimental investigation was undertaken to evaluate the potential use of poplar by-products in cement mortars. Two by-products from poplar processing were studied: sawdust (from sawing wood) and milled fibres (from wood waste obtained during cutting). Poplar fibres and sawdust were incorporated into mortars as sand volume substitution with rates ranging from 0 to 100%. Before introduction into the mortar, poplar aggregates were characterized (morphology and water absorption). It appeared that these wood aggregates absorb very quickly a large amount of water (up to 200%). The introduction of these poplar by-products has significant effects on the composite properties in both fresh and hardened states. It was noted that the workability of the mixtures with the poplar wood varies with the substitution rate. The inhibition of cement setting with poplar sawdust is characterized by maturity tests and affects the mechanical properties of mortars. In addition, increasing the poplar aggregates content causes a continuous increase of the material porosity, which leads to a decrease in density. Besides, it appears that the incorporation of poplar aggregates into mortars also decrease their thermal conductivities, which would help to reduce building heat losses. A significant decrease in the mechanical properties of poplar-based mortars was also noted, related to the rate of fibres or sawdust introduced into mixtures. The hydration disturbances, the high internal porosity of the wood particles and their low density can explain these lower mechanical strengths. However, despite these disturbances, the valorisation of poplar wood by-products remains possible in cementitious materials for the manufacture of concrete masonry blocks. |
2020Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Page, Jonathan; Vanhove, Yannick; Kada, Hassina Experimental study on the valorization of poplar by-products in cement-based materials In: Lecture Notes in Civil Engineering, vol. 54, pp. 603-608, 2020, (cited By 0). Links @article{Djelal2020603,
title = {Experimental study on the valorization of poplar by-products in cement-based materials},
author = {Chafika Djelal-Dantec and Jonathan Page and Yannick Vanhove and Hassina Kada},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073687866&doi=10.1007%2f978-981-15-0802-8_95&partnerID=40&md5=e5ecf9b5701fbc076e31c46b5f86e50b},
doi = {10.1007/978-981-15-0802-8_95},
year = {2020},
date = {2020-01-01},
journal = {Lecture Notes in Civil Engineering},
volume = {54},
pages = {603-608},
note = {cited By 0},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Page, Jonathan; Djelal-Dantec, Chafika; Vanhove, Yannick Optimisation of vibrocompaction process for wood-based concrete blocks In: The International Journal of Advanced Manufacturing Technology, vol. 109, no. 3-4, pp. 1189–1204, 2020. Links @article{Page2020b,
title = {Optimisation of vibrocompaction process for wood-based concrete blocks},
author = {Jonathan Page and Chafika Djelal-Dantec and Yannick Vanhove},
doi = {10.1007/s00170-020-05674-3},
year = {2020},
date = {2020-07-01},
journal = {The International Journal of Advanced Manufacturing Technology},
volume = {109},
number = {3-4},
pages = {1189--1204},
publisher = {Springer Science and Business Media LLC},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Influence of rheological properties of concrete foundation on the implementation of continuous flight auger (CFA) piles In: Materials and Structures, vol. 53, no. 5, 2020. Links @article{Vanhove2020b,
title = {Influence of rheological properties of concrete foundation on the implementation of continuous flight auger (CFA) piles},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
doi = {10.1617/s11527-020-01556-y},
year = {2020},
date = {2020-09-01},
journal = {Materials and Structures},
volume = {53},
number = {5},
publisher = {Springer Science and Business Media LLC},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2020Conference ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Effect of rheological properties of concrete foundation on the implementation of CFA-Piles 29th Conference on Rheology of Building Materials, OTH- Regensburg, Germany, 2020, (COM). @conference{,
title = {Effect of rheological properties of concrete foundation on the implementation of CFA-Piles},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
year = {2020},
date = {2020-01-01},
booktitle = {29th Conference on Rheology of Building Materials, OTH- Regensburg, Germany},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Amziane, S; Djelal-Dantec, Chafika; El-Cheikh, K; Fabbris, F; Fataei, S; Feys, D; Greim, M; Ivanova, I; Keller, H; Khayat, K; Libessart, Laurent; Mechcherine, V; Navarette, I; Perrot, A; Secrieru, E; Sonebi, M; Vanhove, Yannick An overview of RILEM TC MRP round-robin testing of concrete and mortar rheology in Bethune France, May 2018 2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concerte (SCC9), Dresden, Germany, 2019, (ACTI). @conference{Amzi2019a,
title = {An overview of RILEM TC MRP round-robin testing of concrete and mortar rheology in Bethune France, May 2018},
author = {S Amziane and Chafika Djelal-Dantec and K El-Cheikh and F Fabbris and S Fataei and D Feys and M Greim and I Ivanova and H Keller and K Khayat and Laurent Libessart and V Mechcherine and I Navarette and A Perrot and E Secrieru and M Sonebi and Yannick Vanhove},
year = {2019},
date = {2019-01-01},
booktitle = {2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concerte (SCC9)},
address = {Dresden, Germany},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Djelal-Dantec, Chafika; Page, Jonathan; Vanhove, Yannick; Kada, Hassina Experimental study on the valorisation of poplar by products in cement-based materials The Fifth International Conference (CIGOS 2019), Hanoï, Vietnam, 2019, (ACTI). @conference{Djel2019c,
title = {Experimental study on the valorisation of poplar by products in cement-based materials},
author = {Chafika Djelal-Dantec and Jonathan Page and Yannick Vanhove and Hassina Kada},
year = {2019},
date = {2019-01-01},
booktitle = {The Fifth International Conference (CIGOS 2019)},
address = {Hanoï, Vietnam},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Vanhove, Yannick; Agnaou, Elhachemi; Djelal-Dantec, Chafika Utilisation de 3 rhéomètres à béton pour l’étude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons Journées Nationales du Bétons, JNB’19, Hammamet, Tunisie, 2019, (ACTI). @conference{Vanh2019a,
title = {Utilisation de 3 rhéomètres à béton pour l’étude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons},
author = {Yannick Vanhove and Elhachemi Agnaou and Chafika Djelal-Dantec},
year = {2019},
date = {2019-01-01},
booktitle = {Journées Nationales du Bétons, JNB’19},
address = {Hammamet, Tunisie},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Djelal-Dantec, Chafika; Libessart, Laurent; Vanhove, Yannick Tribologie et phénoménologie des interfaces béton/coffrage Journées Nationales du Bétons, JNB’19, Hammamet, Tunisie, 2019, (ACTI). @conference{Djel2019b,
title = {Tribologie et phénoménologie des interfaces béton/coffrage},
author = {Chafika Djelal-Dantec and Laurent Libessart and Yannick Vanhove},
year = {2019},
date = {2019-04-01},
booktitle = {Journées Nationales du Bétons, JNB’19},
address = {Hammamet, Tunisie},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Proceedings ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; Dairou, M; Thibaut, F; Gotteland, P Rheological behavior of concrete foundation during Pile-driving operations Arras, France, 2019, ISBN: 978-2-35158-230-5, (ACTI). @proceedings{Vanh2019b,
title = {Rheological behavior of concrete foundation during Pile-driving operations},
author = {Yannick Vanhove and Chafika Djelal-Dantec and M Dairou and F Thibaut and P Gotteland},
editor = {RILEM},
isbn = {978-2-35158-230-5},
year = {2019},
date = {2019-01-01},
booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM Proceedings PRO 132},
address = {Arras, France},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2019Proceedings ER3 Auteurs : Azzi, M -A; Djelal-Dantec, Chafika; Vanhove, Yannick; Madec, O; Gotteland, P Recommendations on the mix design of concrete foundations for diaphragm walls ; Application to the “Grand Paris” building site Arras, France, 2019, ISBN: 978-2-35158-230-5, (ACTI). @proceedings{Azzi2018a,
title = {Recommendations on the mix design of concrete foundations for diaphragm walls ; Application to the “Grand Paris” building site},
author = {M -A Azzi and Chafika Djelal-Dantec and Yannick Vanhove and O Madec and P Gotteland},
editor = {RILEM},
isbn = {978-2-35158-230-5},
year = {2019},
date = {2019-05-01},
booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM Proceedings PRO 132},
address = {Arras, France},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2019Proceedings ER3 Auteurs : Laiymani, I; Libessart, Laurent; Hammouni, S; Djelal-Dantec, Chafika; Vanhove, Yannick Emulsion effects on the friction on the formwork/concrete interface Arras, 2019, ISBN: 978-2-35158-230-5, (ACTI). @proceedings{Laiy2019a,
title = {Emulsion effects on the friction on the formwork/concrete interface},
author = {I Laiymani and Laurent Libessart and S Hammouni and Chafika Djelal-Dantec and Yannick Vanhove},
editor = {RILEM},
isbn = {978-2-35158-230-5},
year = {2019},
date = {2019-05-01},
booktitle = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18), RILEM PRO 132},
address = {Arras},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {proceedings}
}
|
2019Conference ER3 Auteurs : Libessart, Laurent; Laiymani, Issam; Djelal-Dantec, Chafika; Vanhove, Yannick Influence des émulsions sur le frottement du béton 37èmes Rencontres Universitaires de Génie Civil, Nice, 2019, (ACTN). @conference{Libe2019b,
title = {Influence des émulsions sur le frottement du béton},
author = {Laurent Libessart and Issam Laiymani and Chafika Djelal-Dantec and Yannick Vanhove},
year = {2019},
date = {2019-06-01},
booktitle = {37èmes Rencontres Universitaires de Génie Civil},
address = {Nice},
note = {ACTN},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Rheological properties of concrete foundations One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune), Paris, 2019, (COM). @conference{Vanh2019bb,
title = {Rheological properties of concrete foundations},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
year = {2019},
date = {2019-01-01},
booktitle = {One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune)},
address = {Paris},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conference ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; Vanhove, Yannick Influence of concretes thixotropy on the tribological properties One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune), Paris, 2019, (COM). @conference{Libe2019c,
title = {Influence of concretes thixotropy on the tribological properties},
author = {Laurent Libessart and Chafika Djelal-Dantec and Yannick Vanhove},
year = {2019},
date = {2019-11-01},
booktitle = {One-Day Feedback – Round Robin Test “Comparison of Concrete Rheometers – International Tests at the Artois University (IUT Bethune)},
address = {Paris},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2019Book ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18) RILEM Publications S.A.R.L, 2019, ISBN: ISBN 978-2-35158-230-5, e-ISBN 978-2-35158-231-2. @book{,
title = {Proceeding of the International RILEM Workshop on Rheological Measurements of Cement-based Materials (IRWRMC’18)},
author = {Chafika Djelal-Dantec and Yannick Vanhove},
editor = {Chafika Djelal-Dantec and Yannick Vanhove},
isbn = {ISBN 978-2-35158-230-5, e-ISBN 978-2-35158-231-2},
year = {2019},
date = {2019-01-01},
publisher = {RILEM Publications S.A.R.L},
keywords = {ER3},
pubstate = {published},
tppubtype = {book}
}
|
2018Journal Article ER3 Auteurs : Cheikh, Khadija El; Djelal-Dantec, Chafika; Vanhove, Yannick; Pizette, Patrick; Rémond, Sébastien Experimental and numerical study of granular medium-rough wall interface friction In: Advanced Powder Technology, vol. 29, no. 1, pp. 130 - 141, 2018, ISSN: 0921-8831, (ACL). Abstract | Links @article{ELCHEIKH2018130,
title = {Experimental and numerical study of granular medium-rough wall interface friction},
author = {Khadija El Cheikh and Chafika Djelal-Dantec and Yannick Vanhove and Patrick Pizette and Sébastien Rémond},
url = {http://www.sciencedirect.com/science/article/pii/S0921883117304168},
doi = {https://doi.org/10.1016/j.apt.2017.10.020},
issn = {0921-8831},
year = {2018},
date = {2018-01-01},
journal = {Advanced Powder Technology},
volume = {29},
number = {1},
pages = {130 - 141},
abstract = {Wall roughness plays a crucial role in granular medium - rough wall interface friction. In this study, an experimental device has been designed to study the influence of boundary conditions, more specifically wall roughness, on the behavior of sheared granular medium. The study is based on use of an analog model, and consists of simulating roughness by means of notches and grains in the medium by monodisperse beads and on use of a numerical model based on the discrete element method. The test protocol entails displacing at fixed speed notched rods under confined granular medium. Movement of the beads layer near the rods as well as friction of the beads against the rods are both studied herein. Results indicate that the parameter controlling friction at the granular medium - rough wall interface is primarily the depth of beads embedment in surface asperities. The objective of the associated numerical modeling is to supplement the experimental results.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
Wall roughness plays a crucial role in granular medium - rough wall interface friction. In this study, an experimental device has been designed to study the influence of boundary conditions, more specifically wall roughness, on the behavior of sheared granular medium. The study is based on use of an analog model, and consists of simulating roughness by means of notches and grains in the medium by monodisperse beads and on use of a numerical model based on the discrete element method. The test protocol entails displacing at fixed speed notched rods under confined granular medium. Movement of the beads layer near the rods as well as friction of the beads against the rods are both studied herein. Results indicate that the parameter controlling friction at the granular medium - rough wall interface is primarily the depth of beads embedment in surface asperities. The objective of the associated numerical modeling is to supplement the experimental results. |
2018Conference ER3 Auteurs : Libessart, Laurent; Lahlou, Amine; Djelal-Dantec, Chafika; Vanhove, Yannick; Mateo, Sandrine Influence of the emulsions to the interface formwork/concrete 2nd Edition of the International Workshop on Durability and Sustainability of Concrete Structures (DSCS 2018), Moscow, Russia, 2018, (ACTI). @conference{Libe2018a,
title = {Influence of the emulsions to the interface formwork/concrete},
author = {Laurent Libessart and Amine Lahlou and Chafika Djelal-Dantec and Yannick Vanhove and Sandrine Mateo},
year = {2018},
date = {2018-06-01},
booktitle = {2nd Edition of the International Workshop on Durability and Sustainability of Concrete Structures (DSCS 2018)},
address = {Moscow, Russia},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; Roussel, N; Gotteland, P; Darson, S; Borel, S New tests for Tremie Concrete EFFC/DFI/FNTP works, DFI/EFFC International Conference on Deep Foundations and Ground Improvement, Rome, Italy, 2018, (ACTI). @conference{Djel2018b,
title = {New tests for Tremie Concrete EFFC/DFI/FNTP works, DFI/EFFC},
author = {Chafika Djelal-Dantec and Yannick Vanhove and N Roussel and P Gotteland and S Darson and S Borel},
year = {2018},
date = {2018-06-01},
booktitle = {International Conference on Deep Foundations and Ground Improvement},
address = {Rome, Italy},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Fajfrowski, M; Djelal-Dantec, Chafika; Vanhove, Yannick Un nouvel instrument de caractérisation : le tribomètre béton Journées Internationales de Tribologie (JIFT 2018), Mines Paris Tech CEMEF, Sophia Antipolis, 2018, (ACTI). @conference{Fajf2018a,
title = {Un nouvel instrument de caractérisation : le tribomètre béton},
author = {M Fajfrowski and Chafika Djelal-Dantec and Yannick Vanhove},
year = {2018},
date = {2018-05-01},
booktitle = {Journées Internationales de Tribologie (JIFT 2018), Mines Paris Tech CEMEF},
address = {Sophia Antipolis},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; Joly, N; Vanhove, Yannick; Martin, P Utilisation des huiles recyclées pour le décoffrage du béton – Etude de l’esthétique des parements Journées d’Etude Techniques de l’Association Franco-Maghrebine de Mécanique et des Matériaux (AF3M), JET’2018, Marrakech, 2018, (ACTI). @conference{Libe2018b,
title = {Utilisation des huiles recyclées pour le décoffrage du béton – Etude de l’esthétique des parements},
author = {Laurent Libessart and Chafika Djelal-Dantec and N Joly and Yannick Vanhove and P Martin},
year = {2018},
date = {2018-05-01},
booktitle = {Journées d’Etude Techniques de l’Association Franco-Maghrebine de Mécanique et des Matériaux (AF3M), JET’2018},
address = {Marrakech},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Agnaou, E; Vanhove, Yannick; Djelal-Dantec, Chafika Correlating factors between rheometer for self-compacting concrete 12th fib International PhD-Symposium in Civil Engineering, Prague, 2018, (ACTI). @conference{Agna2018a,
title = {Correlating factors between rheometer for self-compacting concrete},
author = {E Agnaou and Yannick Vanhove and Chafika Djelal-Dantec},
year = {2018},
date = {2018-01-01},
booktitle = {12th fib International PhD-Symposium in Civil Engineering},
address = {Prague},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Agnaou, E; Vanhove, Yannick; Djelal-Dantec, Chafika Etude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons autoplaçants à l’aide de trois rhéomètres 36èmes Rencontres Universitaires de Génie Civil, Saint Etienne, 2018, (ATCN). @conference{Agna2018b,
title = {Etude de l’influence des additions et des superplastifiants sur le comportement rhéologique des bétons autoplaçants à l’aide de trois rhéomètres},
author = {E Agnaou and Yannick Vanhove and Chafika Djelal-Dantec},
year = {2018},
date = {2018-01-01},
booktitle = {36èmes Rencontres Universitaires de Génie Civil},
address = {Saint Etienne},
note = {ATCN},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conference ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika Rheology of Tremie Concrete – Diaphragm wall and Pile-Driving Operations using Hollow Auger EFFC meeting, Federation of German Construction Industry, Berlin, 2018, (COM). @conference{Vanh2019d,
title = {Rheology of Tremie Concrete – Diaphragm wall and Pile-Driving Operations using Hollow Auger},
author = {Yannick Vanhove and Chafika Djelal-Dantec},
year = {2018},
date = {2018-01-01},
booktitle = {EFFC meeting, Federation of German Construction Industry},
address = {Berlin},
note = {COM},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2018Journal Article ER3 Auteurs : Cheikh, K El; Djelal-Dantec, Chafika; Vanhove, Yannick; Pizette, Patrick; Rémond, Sébastien Experimental and numerical study of granular medium-rough wall interface friction In: Advanced Powder Technology, vol. 29, no. 1, pp. 130-141, 2018, (cited By 1). Links @article{ElCheikh2018130b,
title = {Experimental and numerical study of granular medium-rough wall interface friction},
author = {K El Cheikh and Chafika Djelal-Dantec and Yannick Vanhove and Patrick Pizette and Sébastien Rémond},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85032823309&doi=10.1016%2fj.apt.2017.10.020&partnerID=40&md5=611df63f3e46d6de1b710337441924f5},
doi = {10.1016/j.apt.2017.10.020},
year = {2018},
date = {2018-01-01},
journal = {Advanced Powder Technology},
volume = {29},
number = {1},
pages = {130-141},
note = {cited By 1},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2017Journal Article ER3 Auteurs : Engone, Jean-Gérard Ndong; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina Optimizing mortar extrusion using poplar wood sawdust for masonry building block In: The International Journal of Advanced Manufacturing Technology, vol. 95, no. 9, pp. 3769–3780, 2017, ISBN: 1433-3015, (ACL). Abstract | Links @article{Ndong2018,
title = {Optimizing mortar extrusion using poplar wood sawdust for masonry building block},
author = {Jean-Gérard Ndong Engone and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada},
url = {https://doi.org/10.1007/s00170-017-1323-9},
doi = {10.1007/s00170-017-1323-9},
isbn = {1433-3015},
year = {2017},
date = {2017-12-21},
urldate = {2017-12-21},
journal = {The International Journal of Advanced Manufacturing Technology},
volume = {95},
number = {9},
pages = {3769--3780},
abstract = {The wood industry generates some 12 million tons of waste in France, 60% of which basically stems from sawmills. The reuse of this waste in the most common construction materials (e.g., concrete) may offer a sustainable solution. In the literature, the optimization of composites formulations generally focuses on aggregates plant pretreatment regardless of classical optimization parameters and the implementation process that can afford to get a high strength composite. The work presented herein is intended to optimize the mix design of a mortar made from poplar wood by-products, without involving any pretreatment. The conventional mix design parameters (i.e., paste volume, W/C ratio) have been varied. An optimal implementation technique (i.e., extrusion) was used. The wood mortar mix designs have been optimized in order to obtain composites compliant with French standard NF EN 771-3/CN, with respect to criteria regarding both dimensional tolerance and mechanical strength for structural elements (i.e., above 8 MPa at 7 days).A mortar mix design, optimized by means of extrusion, has been used as a reference. Poplar wood particles have been introduced through substitution for the sand volume. Test results indicate that the blocks produced from two wood mortar mixes with 60 and 70% wood aggregate-for-sand substitution rates are in line with the normative requirements relative to dimensional tolerances and mechanical strength. This material compliance underscores the potential use of such blocks as load-bearing masonry elements, thus facilitating the building of structures with a limited environmental impact.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
The wood industry generates some 12 million tons of waste in France, 60% of which basically stems from sawmills. The reuse of this waste in the most common construction materials (e.g., concrete) may offer a sustainable solution. In the literature, the optimization of composites formulations generally focuses on aggregates plant pretreatment regardless of classical optimization parameters and the implementation process that can afford to get a high strength composite. The work presented herein is intended to optimize the mix design of a mortar made from poplar wood by-products, without involving any pretreatment. The conventional mix design parameters (i.e., paste volume, W/C ratio) have been varied. An optimal implementation technique (i.e., extrusion) was used. The wood mortar mix designs have been optimized in order to obtain composites compliant with French standard NF EN 771-3/CN, with respect to criteria regarding both dimensional tolerance and mechanical strength for structural elements (i.e., above 8 MPa at 7 days).A mortar mix design, optimized by means of extrusion, has been used as a reference. Poplar wood particles have been introduced through substitution for the sand volume. Test results indicate that the blocks produced from two wood mortar mixes with 60 and 70% wood aggregate-for-sand substitution rates are in line with the normative requirements relative to dimensional tolerances and mechanical strength. This material compliance underscores the potential use of such blocks as load-bearing masonry elements, thus facilitating the building of structures with a limited environmental impact. |
2016Proceedings Article ER3 Auteurs : Dairou, Mariam Mohaman; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina; Gotteland, Philippe Rheological Behaviour Study of Semi Flowable SCC during CFA Pile-Driving Operations In: pp. 429, 2016, (ACTI). @inproceedings{dairou2016rheological,
title = {Rheological Behaviour Study of Semi Flowable SCC during CFA Pile-Driving Operations},
author = {Mariam Mohaman Dairou and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada and Philippe Gotteland},
year = {2016},
date = {2016-01-01},
journal = {Washington DC, USA 15-18 May 2016 Edited by Kamal H. Khayat},
pages = {429},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2016Journal Article ER2 Auteurs : El-Cheikh, Khadija; Rémond, Sébastien; Pizette, Patrick; Vanhove, Yannick; Djelal-Dantec, Chafika Discrete Element study of granular material Bumpy wall interface behavior In: Physica A: Statistical Mechanics and its Applications, vol. 457, pp. 526 - 539, 2016, ISSN: 0378-4371, (ACL). Links @article{Elch2016a,
title = {Discrete Element study of granular material Bumpy wall interface behavior},
author = {Khadija El-Cheikh and Sébastien Rémond and Patrick Pizette and Yannick Vanhove and Chafika Djelal-Dantec},
url = {http://www.sciencedirect.com/science/article/pii/S0378437116300516},
doi = {http://dx.doi.org/10.1016/j.physa.2016.03.053},
issn = {0378-4371},
year = {2016},
date = {2016-01-01},
journal = {Physica A: Statistical Mechanics and its Applications},
volume = {457},
pages = {526 - 539},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2015Proceedings Article ER3 Auteurs : Dairou, Mariam Mohaman; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina; Gotteland, Philippe Caractérisation en laboratoire de l'enfoncement d'une cage d'armatures dans le béton frais In: Rencontres Universitaires de Génie Civil, 2015, (ACTN). @inproceedings{dairou2015caracterisation,
title = {Caractérisation en laboratoire de l'enfoncement d'une cage d'armatures dans le béton frais},
author = {Mariam Mohaman Dairou and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada and Philippe Gotteland},
year = {2015},
date = {2015-01-01},
booktitle = {Rencontres Universitaires de Génie Civil},
note = {ACTN},
keywords = {ER3},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2015Journal Article ER3 Auteurs : Xing, Zhi; Djelal-Dantec, Chafika; Vanhove, Yannick; Kada, Hassina Wood waste in concrete blocks made by vibrocompression In: Environmental Processes, vol. 2, no. 1, pp. 223–232, 2015, (ACL). @article{xing2015wood,
title = {Wood waste in concrete blocks made by vibrocompression},
author = {Zhi Xing and Chafika Djelal-Dantec and Yannick Vanhove and Hassina Kada},
year = {2015},
date = {2015-01-01},
journal = {Environmental Processes},
volume = {2},
number = {1},
pages = {223--232},
publisher = {Springer},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Journal Article ER3 Auteurs : Goudjil, N; Djelal-Dantec, Chafika; Vanhove, Yannick; Kada, Hassina; Heloun, N Impact of temperature on the demoulding of concrete elements with a polarization process In: Construction and Building Materials, vol. 54, pp. 402–412, 2014, (ACL). Links @article{Goudjil2014,
title = {Impact of temperature on the demoulding of concrete elements with a polarization process},
author = {N Goudjil and Chafika Djelal-Dantec and Yannick Vanhove and Hassina Kada and N Heloun},
doi = {10.1016/j.conbuildmat.2013.12.034},
year = {2014},
date = {2014-03-01},
journal = {Construction and Building Materials},
volume = {54},
pages = {402--412},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Conference ER2 Auteurs : EL-CHEIKH,; Pizette, Patrick; Rémond, Sébastien; Djelal-Dantec, Chafika; Vanhove, Yannick Etude de linterface béton/paroi : Modélisation à léchelle des grai 15 ème édition des journées scientifiques (RF2B) : Regroupement Francophone pour la Recherche et la Formation sur le Béton, DOUAI, 2014, (COM). @conference{ELCH2014,
title = {Etude de linterface béton/paroi : Modélisation à léchelle des grai},
author = {EL-CHEIKH and Patrick Pizette and Sébastien Rémond and Chafika Djelal-Dantec and Yannick Vanhove},
year = {2014},
date = {2014-00-01},
booktitle = {15 ème édition des journées scientifiques (RF2B) : Regroupement Francophone pour la Recherche et la Formation sur le Béton},
pages = {CD ROM},
address = {DOUAI},
note = {COM},
keywords = {ER2},
pubstate = {published},
tppubtype = {conference}
}
|
2013Journal Article ER2 Auteurs : Helnan-Moussa, Benjamin; Vanhove, Yannick; Wirquin, Eric Thixotropic behaviour and structural breakdown of fresh cement pastes comparison between two types of VMA In: Advances in Cement Research, vol. 25(4), pp. 235-244, 2013, (ACL). @article{hel2013a,
title = {Thixotropic behaviour and structural breakdown of fresh cement pastes comparison between two types of VMA},
author = {Benjamin Helnan-Moussa and Yannick Vanhove and Eric Wirquin},
year = {2013},
date = {2013-01-01},
journal = {Advances in Cement Research},
volume = {25(4)},
pages = {235-244},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2013Journal Article ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick Influence of superplaticizien on the properties of the concrete / oil / forarwork interface Construction and Building materials In: 2013, (ACL). @article{djel2013,
title = {Influence of superplaticizien on the properties of the concrete / oil / forarwork interface Construction and Building materials},
author = {Chafika Djelal-Dantec and Yannick Vanhove},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER2 Auteurs : Helnan-Moussa, Benjamin; Vanhove, Yannick; Wirquin, Eric Potential of destructuration of cement pastes: comparison betweentwo types of VMA », acceptée dans la revue Advances in Cement Researchen Juillet 20 In: 2012, (ACL). @article{HELNAN-MOUSSA2012,
title = {Potential of destructuration of cement pastes: comparison betweentwo types of VMA », acceptée dans la revue Advances in Cement Researchen Juillet 20},
author = {Benjamin Helnan-Moussa and Yannick Vanhove and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER2 Auteurs : Helnan-Moussa, Benjamin; Vanhove, Yannick; Wirquin, Eric Ŧhixotropic behavior of fresh cement paste: comparison between twotypes of VMA, Advances in Cement Research, accepté juin 2012 In: 2012, (ACL). @article{HELNAN-MOUSSA2012a,
title = {Ŧhixotropic behavior of fresh cement paste: comparison between twotypes of VMA, Advances in Cement Research, accepté juin 2012},
author = {Benjamin Helnan-Moussa and Yannick Vanhove and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER2 Auteurs : Vanhove, Yannick; HELNAN-MOUSSA, B; Wirquin, Eric Ŧemperature effect on the thixotropy behavior of Self-ConsolidatingConcrete, acceptee dans la revue Magazine of Concrete Researchen Avril 2012 In: 2012, (ACL). @article{VANHOVE2012,
title = {Ŧemperature effect on the thixotropy behavior of Self-ConsolidatingConcrete, acceptee dans la revue Magazine of Concrete Researchen Avril 2012},
author = {Yannick Vanhove and B HELNAN-MOUSSA and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Goudjil, N; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina Electro-osmosis applied for formwork removal of concrete, Journalof Advanced Concrete Ŧechnology, Vol. 10, 2012, p.301-312. In: 2012, (ACL). @article{goud2012a,
title = {Electro-osmosis applied for formwork removal of concrete, Journalof Advanced Concrete Ŧechnology, Vol. 10, 2012, p.301-312.},
author = {N Goudjil and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; SCHWENDENMANN, G; BRISSET, P Study of Self Consolidating Concrete stability during their placement,Construction and Building Materials, Vol. 35, 2012, p. 101-108. In: 2012, (ACL). @article{vanh2012a,
title = {Study of Self Consolidating Concrete stability during their placement,Construction and Building Materials, Vol. 35, 2012, p. 101-108.},
author = {Yannick Vanhove and Chafika Djelal-Dantec and G SCHWENDENMANN and P BRISSET},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER2 Auteurs : HELNAN-MOUSSA, B; Vanhove, Yannick; Wirquin, Eric Potential of destructuration of cement pastes: comparison betweentwo types of VMA », acceptée dans la revue Advances in Cement Researchen Juillet 20 In: 2012, (ACL). @article{HELNAN-MOUSSA2012c,
title = {Potential of destructuration of cement pastes: comparison betweentwo types of VMA », acceptée dans la revue Advances in Cement Researchen Juillet 20},
author = {B HELNAN-MOUSSA and Yannick Vanhove and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER2 Auteurs : HELNAN-MOUSSA, B; Vanhove, Yannick; Wirquin, Eric Ŧhixotropic behavior of fresh cement paste: comparison between twotypes of VMA, Advances in Cement Research, accepté juin 2012 In: 2012, (ACL). @article{HELNAN-MOUSSA2012ab,
title = {Ŧhixotropic behavior of fresh cement paste: comparison between twotypes of VMA, Advances in Cement Research, accepté juin 2012},
author = {B HELNAN-MOUSSA and Yannick Vanhove and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER2 Auteurs : Vanhove, Yannick; HELNAN-MOUSSA, B; Wirquin, Eric Ŧemperature effect on the thixotropy behavior of Self-ConsolidatingConcrete, acceptee dans la revue Magazine of Concrete Researchen Avril 2012 In: 2012, (ACL). @article{VANHOVE2012b,
title = {Ŧemperature effect on the thixotropy behavior of Self-ConsolidatingConcrete, acceptee dans la revue Magazine of Concrete Researchen Avril 2012},
author = {Yannick Vanhove and B HELNAN-MOUSSA and Eric Wirquin},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER2},
pubstate = {published},
tppubtype = {article}
}
|
